Composite Inks for Extrusion Printing of Biological and Biomedical Constructs.

Extrusion-based three-dimensional (3D) printing is an emerging technology for the fabrication of complex structures with various biological and biomedical applications. The method is based on the layer-by-layer construction of the product using a printable ink. The material used as the ink should possess proper rheological properties and desirable performances. Composite materials, which are extensively used in 3D printing applications, can improve the printability and offer superior performances for the printed constructs. Herein, we review composite inks with a focus on composite hydrogels. The properties of different additives including fibers and nanoparticles are discussed. The performances of various composite inks in biological and biomedical systems are delineated through analyzing the synergistic effects between the composite ink components. Different applications, including tissue engineering, tissue model engineering, soft robotics, and four-dimensional printing, are selected to demonstrate how 3D-printable composite inks are exploited to achieve various desired functionality. This review finally presents an outlook of future perspectives on the design of composite inks.

Carbon nanotube composite hydrogels for vocal fold tissue engineering: Biocompatibility, rheology, and porosity.

Porous composite hydrogels were prepared using glycol chitosan as the matrix, glyoxal as the chemical crosslinker, and carbon nanotubes (CNTs) as the fibers. Both carboxylic and hydroxylic functionalized CNTs were used. The homogeneity of CNTs dispersion was evaluated using scanning electron microscopy. Human vocal fold fibroblasts were cultured and encapsulated in the composite hydrogels with different CNT concentrations to quantify cell viability. Rheological tests were performed to determine the gelation time and the storage modulus as a function of CNT concentration. The gelation time tended to decrease for low concentrations and increase at higher concentrations, reaching a local minimum value. The storage modulus obeyed different trends depending on the functional group. The porosity of the hydrogels was found to increase by 120% when higher concentrations of carboxylic CNTs were used. A high porosity may promote cell adhesion, migration, and recruitment from the surrounding native tissue, which will be investigated in a future work aiming at applying this injectable biomaterial for vocal fold tissue regeneration.

Development and validation of a septoplasty training model using 3-dimensional printing technology.

BACKGROUND: Providing alternative training modalities may improve trainees' ability to perform septoplasty. Three-dimensional printing has been shown to be a powerful tool in surgical training. The objectives of this study were to explain the development of our 3-dimensional (3D) printed septoplasty training model, to assess its face and content validity, and to present evidence supporting its ability to distinguish between levels of surgical proficiency. METHODS: Imaging data of a patient with a nasal septal deviation was selected for printing. Printing materials reproducing the mechanical properties of human tissues were selected based on literature review and prototype testing. Eight expert rhinologists, 6 senior residents, and 6 junior residents performed endoscopic septoplasties on the model and completed a postsimulation survey. Performance metrics in quality (final product analysis), efficiency (time), and safety (eg, perforation length, nares damage) were recorded and analyzed in a study-blind manner. RESULTS: The model was judged to be anatomically correct and the steps performed realistic, with scores of 4.05 ± 0.82 and 4.2 ± 1, respectively, on a 5-point Likert scale. Ninety-two percent of residents desired the simulator to be integrated into their teaching curriculum. There was a significant difference (p < 0.05) between the expert, intermediate, and novice groups in time taken and nares cuts, whereas other performance metrics showed no significant difference. CONCLUSION: To our knowledge, there are no other simulator training models for septoplasty. Our model incorporates 2 different materials mixed into the 3 relevant consistencies necessary to simulate septoplasty. Our findings provide evidence supporting the validity of the model.

Broadband sound generation by confined pulsating jets in a mechanical model of the human larynx.

Experiments were performed to study the production of broadband sound in confined pulsating jets through orifices with a time-varying area. The goal was to better understand broadband sound generation at the human glottis during voicing. The broadband component was extracted from measured sound signals by the elimination of the periodic component through ensemble averaging. Comparisons were made between the probability density functions of the broadband sound in pulsating jets and of comparable stationary jets. The results indicate that the quasi-steady approximation may be valid for the broadband component when the turbulence is well established and the turbulence kinetic energy is comparatively large. A wavelet analysis of the broadband sound showed that random sound production was modulated at the driving frequency. Two distinct sound production peaks were observed during one cycle, presumably associated firstly with jet formation and secondly with flow deceleration during orifice closing. Most high-frequency sound was produced during the closing phase. Deviations from quasi-steady behavior were observed. As the driving frequency increased, sound production during the opening phase was reduced, possibly due to the shorter time available for turbulence to develop. These results may be useful for better quality voice synthesis.