Mitigating heat effects in the workplace with a ventilation jacket: Simulations of the whole-body and local human thermophysiological response with a sweating thermal manikin in a warm-dry environment.

Climate change is increasingly affecting human well-being and will inevitably impact on occupational sectors in terms of costs, productivity, workers' health and injuries. Among the cooling garment developed to reduce heat strain, the ventilation jacket could be considered for possible use in workplaces, as it is wearable without limiting the user's mobility and autonomy. In this study, simulations with a sweating manikin are carried out to investigate the effects of a short-sleeved ventilation jacket on human thermophysiological responses in a warm-dry scenario. Simulations were performed in a climatic chamber (air temperature = 30.1 °C; air velocity = 0.29 m/s; relative humidity = 30.0 %), considering two constant levels of metabolic rate M (M1 = 2.4 MET; M2 = 3.2 MET), a sequence of these two (Work), and three levels of fan velocities (lf = 0; lf=2; lf=4). The results revealed a more evident impact on the mean skin temperature (Tsk) compared to the rectal temperature (Tre), with significant decreases (compared to fan-off) at all M levels, for Tsk from the beginning and for Tre from the 61st minute. Skin temperatures of the torso zones decreased significantly (compared to fan-off) at all M levels, and a greater drop was registered for the Back. The fans at the highest level (lf=4) were significantly effective in improving whole-body and local thermal sensations when compared to fan-off, at all M levels. At the intermediate level (lf=2), the statistical significance varied with thermal zone, M and time interval considered. The results of the simulations also showed that the Lower Torso needs to be monitored at M2 level, as the drop in skin temperature could lead to local overcooling and thermal discomfort. Simulations showed the potential effectiveness of the ventilation jacket, but human trials are needed to verify its cooling power in real working conditions.

Temperature-humidity index monitoring during two summer seasons in dairy cow sheds in Mugello (Tuscany).

Many studies have reported that the impact of high temperatures affects physiology, welfare, health, and productivity of farm animals, and among these, the dairy cattle farming is one of the livestock sectors that suffers the greatest effects. The temperature-humidity index (THI) represents the state of the art in the evaluation of heat stress conditions in dairy cattle but often its measurement is not carried out in sheds. For this reason, the aim of this study was the monitoring of the THI in three dairy cattle farms in Mugello (Tuscany) to understand its influence on dairy cows. THI values were calculated using meteorological data from direct observation in sheds and outdoor environments. Data relating to the animal's behavior were collected using radio collars. The Pearson test and Mann-Kendall test were used for statistical analysis. The results highlighted a significant (P < 0.001) upward trend in THImax during the last 30 years both in Low Mugello (+ 1.1 every 10 years) and in High Mugello (+ 0.9 every 10 years). In Low Mugello sheds, during the period 2020-2022, more than 70% of daytime hours during the summer period were characterized by heat risk conditions (THI > 72) for livestock. On average the animals showed a significant (P < 0.001) decrease in time spent to feeding and rumination, both during the day and the night, with a significant (P < 0.001) increase in inactivity. This study fits into the growing demand for knowledge of the micro-climatic conditions within farms in order to support resilience actions for protecting both animal welfare and farm productivity from the effects of climate change. This could also be carried out thanks to estimation models which, based on the meteorological conditions forecast, could implement the thermal stress indicator (THI) directly from the high-resolution meteorological model, allowing to get a prediction of the farm's potential productivity loss based on the expected THI.

Occupational heat stress, heat-related effects and the related social and economic loss: a scoping literature review.

Introduction: While there is consistent evidence on the effects of heat on workers' health and safety, the evidence on the resulting social and economic impacts is still limited. A scoping literature review was carried out to update the knowledge about social and economic impacts related to workplace heat exposure. Methods: The literature search was conducted in two bibliographic databases (Web of Science and PubMed), to select publications from 2010 to April 2022. Results: A total of 89 studies were included in the qualitative synthesis (32 field studies, 8 studies estimating healthcare-related costs, and 49 economic studies). Overall, consistent evidence of the socioeconomic impacts of heat exposure in the workplace emerges. Actual productivity losses at the global level are nearly 10% and are expected to increase up to 30-40% under the worst climate change scenario by the end of the century. Vulnerable regions are mainly low-latitude and low- and middle-income countries with a greater proportion of outdoor workers but include also areas from developed countries such as southern Europe. The most affected sectors are agriculture and construction. There is limited evidence regarding the role of cooling measures and changes in the work/rest schedule in mitigating heat-related productivity loss. Conclusion: The available evidence highlights the need for strengthening prevention efforts to enhance workers' awareness and resilience toward occupational heat exposure, particularly in low- and middle-income countries but also in some areas of developed countries where an increase in frequency and intensity of heat waves is expected under future climate change scenarios.

Development of a Prototype Observatory of Heat-Related Occupational Illnesses and Injuries through the Collection of Information from the Italian Press, as Part of the WORKLIMATE Project.

Exposure to heat is a recognized occupational risk factor. Deaths and accidents at work caused by high temperatures are underestimated. With the aim of detecting and monitoring heat-related illnesses and injuries, a prototype database of occupational events attributable to critical thermal conditions reported in Italian newspapers was created. Information was analyzed from national and local online newspapers using a web application. The analysis was conducted from May to September during the three-year period 2020-2022. Articles concerning 35 occupational heat-related illnesses and injuries were selected; 57.1% of the events were reported in 2022, and 31.4% of total accidents occurred in the month of July 2022, when the Universal Thermal Climate Index daily mean values corresponded to "moderate heat stress" (51.0%) and "strong heat stress" (49.0%). Fatal heat-related illnesses were the most frequent conditions described. In most cases, workers had been involved in outdoor activities in the construction sector. A comprehensive report was created by compiling all relevant newspaper articles to enhance awareness of this issue among relevant stakeholders and promote heat-risk prevention strategies in the current context where heatwaves are becoming increasingly frequent, intense and long-lasting.

Effects of Temperatures and Heatwaves on Occupational Injuries in the Agricultural Sector in Italy.

The effects of heat on health have been well documented, while less is known about the effects among agricultural workers. Our aim is to estimate the effects and impacts of heat on occupational injuries in the agricultural sector in Italy. Occupational injuries in the agricultural sector from the Italian national workers' compensation authority (INAIL) and daily mean air temperatures from Copernicus ERA5-land for a five-year period (2014-2018) were considered. Distributed lag non-linear models (DLNM) were used to estimate the relative risk and attributable injuries for increases in daily mean air temperatures between the 75th and 99th percentile and during heatwaves. Analyses were stratified by age, professional qualification, and severity of injury. A total of 150,422 agricultural injuries were considered and the overall relative risk of injury for exposure to high temperatures was 1.13 (95% CI: 1.08; 1.18). A higher risk was observed among younger workers (15-34 years) (1.23 95% CI: 1.14; 1.34) and occasional workers (1.25 95% CI: 1.03; 1.52). A total of 2050 heat-attributable injuries were estimated in the study period. Workers engaged in outdoor and labour-intensive activities in the agricultural sector are at greater risk of injury and these results can help target prevention actions for climate change adaptation.

Association between extreme temperature exposure and occupational injuries among construction workers in Italy: An analysis of risk factors.

BACKGROUND/AIM: Extreme temperatures have impact on the health and occupational injuries. The construction sector is particularly exposed. This study aims to investigate the association between extreme temperatures and occupation injuries in this sector, getting an insight in the main accidents-related parameters. METHODS: Occupational injuries in the construction sector, with characteristic of accidents, were retrieved from Italian compensation data during years 2014-2019. Air temperatures were derived from ERA5-land Copernicus dataset. A region based time-series analysis, in which an over-dispersed Poisson generalized linear regression model, accounting for potential non-linearity of the exposure- response curve and delayed effect, was applied, and followed by a meta-analysis of region-specific estimates to obtain a national estimate. The relative risk (RR) and attributable cases of work-related injuries for an increase in mean temperature above the 75th percentile (hot) and for a decrease below the 25th percentile (cold) were estimated, with effect modifications by different accidents-related parameters. RESULTS: The study identified 184,936 construction occupational injuries. There was an overall significant effect for high temperatures (relative risk (RR) 1.216 (95% CI: (1.095-1.350))) and a protective one for low temperatures (RR 0.901 (95% CI: 0.843-0.963)). For high temperatures we estimated 3,142 (95% CI: 1,772-4,482) attributable cases during the studied period. RRs from 1.11 to 1.30 were found during heat waves days. Unqualified workers, as well as masons and plumbers, were found to be at risk at high temperatures. Construction, quarry and industrial sites were the risky working environments, as well as specific physical activities like working with hand-held tools, operating with machine and handling of objects. Contact with sharp, pointed, rough, coarse 'Material Agent' were the more risky mode of injury in hot conditions. CONCLUSIONS: Prevention policies are needed to reduce the exposure to high temperatures of construction workers. Such policies will become a critical issue considering climate change.

Protective Measures From Solar Ultraviolet Radiation for Beach Lifeguards in Tuscany (Italy): Shade and Clothing Strategies.

Background: The exposure to solar ultraviolet radiation is a significant risk factor generally underestimated by outdoor workers and employers. Several studies have pointed out that occupational solar exposure increased eye and skin diseases with a considerable impact on the lives and productivity of affected workers.The main purpose of this study was to evaluate the effectiveness against ultraviolet radiation of some measures recently undertaken for the protection of lifeguards in a coastal area of Tuscany. Methods: Different shading structures (gazebos and beach umbrella) were tested during a sunny summer's day on a sandy beach by means of two radiometers; the UV protection offered by some T-shirts used by lifeguards was also tested in the laboratory with a spectrophotometer. Results: The analysed shading structures strongly reduced the ultraviolet radiation by up to 90%, however a not always negligible diffuse radiation is also present in the shade, requiring further protective measures (T-shirt, sunglasses, sunscreen, etc.); the tested T-shirts showed a very good-excellent protection according to the Australian/New Zealand standard. Conclusion: Results obtained in this study suggest how the adoption and dissemination of good practices, including those tested, could be particularly effective as a primary prevention for lifeguards who are subjected to very high levels of radiation for long periods.

Workers' Perception Heat Stress: Results from a Pilot Study Conducted in Italy during the COVID-19 Pandemic in 2020.

Many workers are exposed to the effects of heat and often to extreme temperatures. Heat stress has been further aggravated during the COVID-19 pandemic by the use of personal protective equipment to prevent SARS-CoV-2 infection. However, workers' risk perception of heat stress is often low, with negative effects on their health and productivity. The study aims to identify workers' needs and gaps in knowledge, suggesting the adaptation of measures that best comply with the needs of both workers and employers. A cross-sectional online questionnaire survey was conducted in Italy in the hottest months of 2020 (June-October) through different multimedia channels. The data collected were analyzed using descriptive statistics; analytical tests and analysis of variance were used to evaluate differences between groups of workers. In total, 345 questionnaires were collected and analyzed. The whole sample of respondents declared that heat is an important contributor to productivity loss and 83% of workers did not receive heat warnings from their employer. In this context, the internet is considered as the main source of information about heat-related illness in the workplace. Results highlight the need to increase workers' perception of heat stress in the workplace to safeguard their health and productivity. About two-thirds of the sample stated that working in the sun without access to shaded areas, working indoors without adequate ventilation, and nearby fire, steam, and hot surfaces, represent the main injuries' risk factors.

A potential wearable solution for preventing heat strain in workplaces: The cooling effect and the total evaporative resistance of a ventilation jacket.

The increase in average seasonal temperatures has an impact in the occupational field, especially for those sectors whose work activities are performed outdoors (agricultural, road and construction sectors). Among the adaptation measures and solutions developed to counteract occupational heat strain, personal cooling garments represent a wearable technology designed to remove heat from the human body, enhancing human performance. This study aims to investigate the effectiveness and the cooling power of a specific cooling garment, i.e. a ventilation jacket, by quantifying the evaporative heat losses and the total evaporative resistance both when worn alone and in combination with a work ensemble, at three adjustments of air ventilation speed. Standardised "wet" tests in a climatic chamber were performed on a sweating manikin in isothermal conditions considering three clothing ensembles (single jacket, work ensemble and a combination of both) and three adjustments of fan velocity. Results showed a significant increase (p < 0.001) in evaporative heat loss values when the fan velocity increased, particularly within the trunk zones for all the considered clothing ensembles, showing that fans enhanced the dissipation by evaporation. The cooling power, quantified in terms of percent changes of evaporative heat loss, showed values exceeding 100% when fans were on, in respect to the condition of fans-off, for the trunk zones except for the Chest. A significant (p < 0.01) decrease (up to 42.3%) in the total evaporative resistance values of the jacket, coupled with the work ensemble, was found compared to the fans-off condition. Results confirmed and quantified the cooling effect of the ventilation jacket which enhanced the evaporative heat losses of the trunk zones, helping the body to dissipate heat and showing the potential for a heat adaptation measure to be developed.

A functional seasonal thermal hot-spot classification: Focus on industrial sites.

This study was focused on the metropolitan area of Florence in Tuscany (Italy) with the aim to provide a functional spatial thermal anomaly indicator obtained throughout a thermal summer and winter hot-spot detection. The hot-spot analysis was performed by applying Getis-Ord Gi* spatial statistics to Land Surface Temperature (LST) layers, obtained from Landsat 8 remote sensing data during the 2015-2019 daytime summer and winter period, to delimitate summer hot- and cool-spots, and winter warm- and cold-spots. Further, these ones were spatially combined thus obtaining a comprehensive summer-winter Thermal Hot-Spot (THSSW) spatial indicator. Winter and summer mean daily thermal comfort profiles were provided for the study area assessing the Universal Thermal Climate Index (UTCI) by using meteorological data available from seven local weather stations, located at a maximum distance of 350 m from industrial sites. A specific focus on industrial sites was carried out by analyzing the industrial buildings characteristics and their surrounding areas (50 m buffer), through the following layers: industrial building area (BA), surface albedo of buildings (ALB), impervious area (IA), tree cover (TC), and grassland area (GA). The novel THSSW classification applied to industrial buildings has shown that about 50% of the buildings were located in areas characterized by summer hot-spots. Increases in BA and IA revealed warming effects on industrial buildings, whereas increases in ALB, TC, and GA disclosed cooling effects. A decrease of about 10% of IA replaced by TC and GA was associated with about 2 °C decrease of LST. Very strong outdoor heat stress conditions were observed during summer daytime, whereas moderate winter outdoor cold stress conditions were recorded during nighttime until the early morning. The thermal spatial hot-spot classification in industrial areas provides a very useful source of information for thermal mitigation strategies aimed to reduce the heat-related health risk for workers.

Performances of Limited Area Models for the WORKLIMATE Heat-Health Warning System to Protect Worker's Health and Productivity in Italy.

Outdoor workers are particularly exposed to climate conditions, and in particular, the increase of environmental temperature directly affects their health and productivity. For these reasons, in recent years, heat-health warning systems have been developed for workers generally using heat stress indicators obtained by the combination of meteorological parameters to describe the thermal stress induced by the outdoor environment on the human body. There are several studies on the verification of the parameters predicted by meteorological models, but very few relating to the validation of heat stress indicators. This study aims to verify the performance of two limited area models, with different spatial resolution, potentially applicable in the occupational heat health warning system developed within the WORKLIMATE project for the Italian territory. A comparison between the Wet Bulb Globe Temperature predicted by the models and that obtained by data from 28 weather stations was carried out over about three summer seasons in different daily time slots, using the most common skill of performance. The two meteorological models were overall comparable for much of the Italian explored territory, while major limits have emerged in areas with complex topography. This study demonstrated the applicability of limited area models in occupational heat health warning systems.

Health vs. wealth: Employer, employee and policy-maker perspectives on occupational heat stress across multiple European industries.

Successful implementation of cooling strategies obviously depends on identifying effective interventions, but in industrial settings, it is equally important to consider feasibility and economic viability. Many cooling interventions are available, but the decision processes affecting adoption by end-users are not well elucidated. We therefore arranged two series of meetings with stakeholders to identify knowledge gaps, receive feedback on proposed cooling interventions, and discuss factors affecting implementation of heat-health interventions. This included four meetings attended by employers, employees, and health and safety officers (n = 41), and three meetings attended primarily by policy makers (n = 74), with feedback obtained via qualitative and quantitative questionnaires and focus group discussions. On a 10-point scale, both employers and employees valued worker safety (9.1 ± 1.8; mean±SD) and health (8.5 ± 1.9) as more important than protecting company profits (6.3 ± 2.3). Of the respondents, 41% were unaware of any cooling strategies at their company and of those who were aware, only 30% thought the interventions were effective. Following presentation of proposed interventions, the respondents rated "facilitated hydration", "optimization of clothing/protective equipment", and "rescheduling of work tasks" as the top-three preferred solutions. The main barriers for adopting cooling interventions were cost, feasibility, employer perceptions, and legislation. In conclusion, preventing negative health and safety effects was deemed to be more important than preventing productivity loss. Regardless of work sector or occupation, both health and wealth were emphasized as important parameters and considered as somewhat interrelated. However, a large fraction of the European worker force lacks information on effective measures to mitigate occupational heat stress. List of abbreviations: OH-Stress: Occupational heat stress; WBGT: Wet Bulb Globe Temperature.

Sport in Town: The Smart Healthy ENV Project, a Pilot Study of Physical Activity with Multiparametric Monitoring.

BACKGROUND: Increasing evidence links meteorological characteristics and air pollution to physiological responses during sports activities in urban areas with different traffic levels. OBJECTIVE: The main objective of the Smart Healthy ENV (SHE, "Smart Monitoring Integrated System For A Healthy Urban Environment In Smart Cities") project was to identify the specific responses of a group of volunteers during physical activity, by monitoring their heart rates and collecting breath samples, combined with data on meteorological determinants and pollution substances obtained through fixed sensor nodes placed along city routes and remotely connected to a dedicated data acquisition server. METHODS: Monitoring stations were placed along two urban routes in Pisa, each two km long, with one located within the park beside the Arno river (green route) and the other in a crowded traffic zone (red route). Our sample participants were engaged in sports activities (N = 15, with different levels of ability) and were monitored through wearable sensors. They were first asked to walk back and forth (4 km) and then to run the same route. The experimental sessions were conducted over one day per route. A breath sample was also collected before each test. A questionnaire concerning temperature and fatigue perception was administered for all of the steps of the study over the two days. RESULTS: The heart rates of the participants were monitored in the baseline condition, during walking, and while running, and were correlated with meteorological and pollutant data and with breath composition. Changes in the heart rates and breath composition were detected during the experimental sessions. These variations were related to the physical activity and to the meteorological conditions and air pollution levels. CONCLUSIONS: The SHE project can be considered a proof-of-concept study aimed at monitoring physiological and environmental variables during physical activity in urban areas, and can be used in future studies to provide useful information to those involved in sports and the broader community.

A Web Survey to Evaluate the Thermal Stress Associated with Personal Protective Equipment among Healthcare Workers during the COVID-19 Pandemic in Italy.

The pandemic has been afflicting the planet for over a year and from the occupational point of view, healthcare workers have recorded a substantial increase in working hours. The use of personal protective equipment (PPE), necessary to keep safe from COVID-19 increases the chances of overheating, especially during the summer seasons which, due to climate change, are becoming increasingly warm and prolonged. A web survey was carried out in Italy within the WORKLIMATE project during the summer and early autumn 2020. Analysis of variance (ANOVA) was used to evaluate differences between groups. 191 questionnaires were collected (hospital doctor 38.2%, nurses 33.5%, other healthcare professionals 28.3%). The impact of PPE on the thermal stress perception declared by the interviewees was very high on the body areas directly covered by these devices (78% of workers). Workers who used masks for more than 4 h per day perceived PPE as more uncomfortable (p < 0.001) compared to the others and reported a greater productivity loss (p < 0.001). Furthermore, the study highlighted a high perception of thermal stress among healthcare workers that worn COVID-19-PPE and this enhances the need for appropriate heat health warning systems and response measures addressed to the occupational sector.

The HEAT-SHIELD project - Perspectives from an inter-sectoral approach to occupational heat stress.

OBJECTIVES: To provide perspectives from the HEAT-SHIELD project (www.heat-shield.eu): a multi-national, inter-sectoral, and cross-disciplinary initiative, incorporating twenty European research institutions, as well as occupational health and industrial partners, on solutions to combat negative health and productivity effects caused by working on a warmer world. METHODS: In this invited review, we focus on the theoretical and methodological advancements developed to combat occupational heat stress during the last five years of operation. RESULTS: We outline how we created climate forecast models to incorporate humidity, wind and solar radiation to the traditional temperature-based climate projections, providing the basis for timely, policy-relevant, industry-specific and individualized information. Further, we summarise the industry-specific guidelines we developed regarding technical and biophysical cooling solutions considering effectiveness, cost, sustainability, and the practical implementation potential in outdoor and indoor settings, in addition to field-testing of selected solutions with time-motion analyses and biophysical evaluations. All recommendations were adjusted following feedback from workshops with employers, employees, safety officers, and adjacent stakeholders such as local or national health policy makers. The cross-scientific approach was also used for providing policy-relevant information based on socioeconomic analyses and identification of vulnerable regions considered to be more relevant for political actions than average continental recommendations and interventions. DISCUSSION: From the HEAT-SHIELD experiences developed within European settings, we discuss how this inter-sectoral approach may be adopted or translated into actionable knowledge across continents where workers and societies are affected by escalating environmental temperatures.

Surface urban heat islands in Italian metropolitan cities: Tree cover and impervious surface influences.

Land surface temperature (LST) predictors, such as impervious and vegetated surfaces, strongly influence the urban landscape mosaic, also changing microclimate conditions and exacerbating the surface urban heat island (SUHI) phenomenon. The aim of this study was to investigate the summer daytime SUHI phenomenon and the role played by impervious and tree cover surfaces in the 10 Italian peninsular metropolitan cities. Summer daytime LST values were assessed by using MODIS data referred to the months of June, July and August from 2016 to 2018. High spatial resolution (10 m) of impervious surface and tree cover layers was calculated based on open-data developed by the Italian National Institute for Environmental Protection and Research. A novel informative urban surface landscape layer was developed combining impervious surfaces and tree cover densities and its mapping for metropolitan cities was performed. Summer daytime SUHI rose significantly, increased especially in inland cities, by increasing the size of areas with low tree cover densities in the metropolitan core (or decreasing areas with low tree cover densities outside the metropolitan core), further increasing its intensity when the impervious density grew. A mitigating effect of the sea on daytime LST and SUHI was observed on coastal cities. The most intense SUHI phenomenon was observed in Turin (the largest Italian metropolitan city): for every 10% increase in areas with highly impervious surfaces and low tree cover densities in the metropolitan core, the SUHI significantly (p < 0.001) increased by 4.0 °C. Increased impervious surfaces combined with low tree cover densities represented the main driving process to increase the summer daytime SUHI intensity in most studied cities. These findings are useful to identify summer daytime LST critical areas and to implement the most efficient urban-heat-island mitigation strategies in order to safeguard the vulnerable urban environment and enhance quality of life for the population.

Heat Stress and Thermal Perception amongst Healthcare Workers during the COVID-19 Pandemic in India and Singapore.

The need for healthcare workers (HCWs) to wear personal protective equipment (PPE) during the coronavirus disease 2019 (COVID-19) pandemic heightens their risk of thermal stress. We assessed the knowledge, attitudes, and practices of HCWs from India and Singapore regarding PPE usage and heat stress when performing treatment and care activities. One hundred sixty-five HCWs from India (n = 110) and Singapore (n = 55) participated in a survey. Thirty-seven HCWs from Singapore provided thermal comfort ratings before and after ice slurry ingestion. Differences in responses between India and Singapore HCWs were compared. A p-value cut-off of 0.05 depicted statistical significance. Median wet-bulb globe temperature was higher in India (30.2 °C (interquartile range [IQR] 29.1-31.8 °C)) than in Singapore (22.0 °C (IQR 18.8-24.8 °C)) (p < 0.001). Respondents from both countries reported thirst (n = 144, 87%), excessive sweating (n = 145, 88%), exhaustion (n = 128, 78%), and desire to go to comfort zones (n = 136, 84%). In Singapore, reports of air-conditioning at worksites (n = 34, 62%), dedicated rest area availability (n = 55, 100%), and PPE removal during breaks (n = 54, 98.2%) were higher than in India (n = 27, 25%; n = 46, 42%; and n = 66, 60%, respectively) (p < 0.001). Median thermal comfort rating improved from 2 (IQR 1-2) to 0 (IQR 0-1) after ice slurry ingestion in Singapore (p < 0.001). HCWs are cognizant of the effects of heat stress but might not adopt best practices due to various constraints. Thermal stress management is better in Singapore than in India. Ice slurry ingestion is shown to be practical and effective in promoting thermal comfort. Adverse effects of heat stress on productivity and judgment of HCWs warrant further investigation.