Assessment of multispecies biofilm growth on root canal dentin under different radiation therapy regimens.

OBJECTIVES: To assess the growth of a multispecies biofilm on root canal dentin under different radiotherapy regimens. MATERIALS AND METHODS: Sixty-three human root dentin cylinders were distributed into six groups. In three groups, no biofilm was formed (n = 3): NoRT) non-irradiated dentin; RT55) 55 Gy; and RT70) 70 Gy. In the other three groups (n = 18), a 21-day multispecies biofilm (Enterococcus faecalis, Streptococcus mutans, and Candida albicans) was formed in the canal: NoRT + Bio) non-irradiated + biofilm; RT55 + Bio) 55 Gy + biofilm; and RT70 + Bio) 70 Gy + biofilm. The biofilm was quantified (CFUs/mL). Biofilm microstructure was assessed under SEM. Microbial penetration into dentinal tubules was assessed under CLSM. For the biofilm biomass and dentin microhardness pre- and after biofilm growth assessments, 45 bovine dentin specimens were distributed into three groups (n = 15): NoRT) non-irradiated + biofilm; RT55 + Bio) 55 Gy + biofilm; and RT70 + Bio) 70 Gy + biofilm. RESULTS: Irradiated specimens (70 Gy) had higher quantity of microorganisms than non-irradiated (p = .010). There was gradual increase in biofilm biomass from non-irradiated to 55 Gy and 70 Gy (p < .001). Irradiated specimens had greater reduction in microhardness after biofilm growth. Irradiated dentin led to the growth of a more complex and irregular biofilm. There was microbial penetration into the dentinal tubules, regardless of the radiation regimen. CONCLUSION: Radiotherapy increased the number of microorganisms and biofilm biomass and reduced dentin microhardness. Microbial penetration into dentinal tubules was noticeable. CLINICAL RELEVANCE: Cumulative and potentially irreversible side effects of radiotherapy affect biofilm growth on root dentin. These changes could compromise the success of endodontic treatment in oncological patients undergoing head and neck radiotherapy.

Effect of shade and opacity on color differences and translucency of resin composite veneers over lighter and darker substrates.

To evaluate color differences (ΔE00) and translucency parameters (TP) from mono, bi, and trilayer resin composite veneers using different opacities and shades of resin composite over lighter and darker simulated tooth-colored substrates. Mono, bi, and trilayer veneers (1.5 mm) (n = 12) were made using two shades (A1 and A2) and three opacities (enamel, body, and dentin) of resin composite over simulated lighter (A1) and darker (C4, and C4+) tooth-colored substrates. CIEDE2000 formula was used to calculate ΔE00 considering simulated tooth-colored substrate versus opacities in distinct mono, bi, and trilayer combinations of resin composite over the simulated tooth-colored substrate. The TP was calculated using color coordinates measured over standard white and black backgrounds. Differences in ΔE00 and TP values were calculated with a Three-way Analysis of Variance followed by Tukey's post-hoc test. A1E and A1B monolayer veneers showed similar TP values. Significantly higher ΔE00 values were observed over darker (C4 and C4+), and lower over lighter (A1) simulated tooth-colored substrate. Bilayer and trilayer veneers using dentin opacity provided similar ΔE00 values over the darker tooth-colored substrate. Distinct shades and opacities of resin composite layer combinations over lighter and darker tooth-colored substrates significantly affected TP and ΔE00 values. A1 shade and dentin opacity of monolayer resin composite veneers yielded higher ΔE00 values over darker tooth-colored substrates.

Prevalence of lectures about dental esthetics and female speakers in three Brazilian conferences.

This study analyzed the prevalence of lectures involving esthetics in the scientific program of Brazilian dental conferences and the gender distribution of speakers. All lectures presented in three dental conferences (Bahia, São Paulo, and Goiás states) held from 2016 to 2020 were evaluated. Three investigators individually divided the lectures according to the specialties recognized by the Brazilian Federal Council of Dentistry (FCD) based on their titles. The lectures were also classified as involving or not esthetics, and the speaker`s gender was recorded. Descriptive statistical analyses were performed, and Chi-square tests assessed possible associations between factors. The words most cited in the titles of the lectures were "esthetic" (13.6%), "dentistry" (9.9%), and "treatment" (8.1%). Oral diseases were barely mentioned in the titles (up to 1.3%). The highest number of lectures was observed for the specialty of Restorative Dentistry (22.3%), followed by Prosthodontics (18.5%). Approximately one-third of lectures involved some aesthetic aspect, but this percentage ranged from 71.9 to 78.6% for the two specialties with more lectures. Regarding the speaker`s gender, the inequity was higher for lectures involving esthetics (81.6% of males) than for topics unrelated to esthetics (66.7%). More male speakers than females were observed for all specialties. The highest gender gap was observed for Pediatric Dentistry with 62.4% male speakers, although only 10.6% of FCD registered specialists were men. In conclusion, the Brazilian dental conferences analyzed seemed to favor offering lectures dealing with esthetic topics and male speakers.

Prevalence of lectures about dental esthetics and female speakers in three Brazilian conferences

Abstract This study analyzed the prevalence of lectures involving esthetics in the scientific program of Brazilian dental conferences and the gender distribution of speakers. All lectures presented in three dental conferences (Bahia, São Paulo, and Goiás states) held from 2016 to 2020 were evaluated. Three investigators individually divided the lectures according to the specialties recognized by the Brazilian Federal Council of Dentistry (FCD) based on their titles. The lectures were also classified as involving or not esthetics, and the speaker`s gender was recorded. Descriptive statistical analyses were performed, and Chi-square tests assessed possible associations between factors. The words most cited in the titles of the lectures were "esthetic" (13.6%), "dentistry" (9.9%), and "treatment" (8.1%). Oral diseases were barely mentioned in the titles (up to 1.3%). The highest number of lectures was observed for the specialty of Restorative Dentistry (22.3%), followed by Prosthodontics (18.5%). Approximately one-third of lectures involved some aesthetic aspect, but this percentage ranged from 71.9 to 78.6% for the two specialties with more lectures. Regarding the speaker`s gender, the inequity was higher for lectures involving esthetics (81.6% of males) than for topics unrelated to esthetics (66.7%). More male speakers than females were observed for all specialties. The highest gender gap was observed for Pediatric Dentistry with 62.4% male speakers, although only 10.6% of FCD registered specialists were men. In conclusion, the Brazilian dental conferences analyzed seemed to favor offering lectures dealing with esthetic topics and male speakers.

Resumo Este estudo analisou a prevalência de palestras envolvendo estética na programação científica de congressos de Odontologia brasileiros, e a distribuição do gênero dos palestrantes. Todas as palestras apresentadas em três congressos de Odontologia (CIOBA, CIOGO, and CIOSP) entre 2016 e 2020 foram avaliadas. Três avaliadores utilizaram os títulos das palestras para dividi-las entre as especialidades reconhecidas pelo Conselho Federal de Odontologia (CFO) do Brasil. As palestras foram também classificadas como envolvendo ou não estética, e o gênero do palestrante foi registrado. Análises estatísticas descritivas foram realizadas, e testes de Qui-quadrado avaliaram possíveis interações entre fatores. A palavra mais citada nos títulos das palestras foi "estética" (13,6%), seguido por "odontologia" (9,9%) e "tratamento" (8,1%). Doenças orais foram raramente mencionadas nos títulos (até 1,3%). O maior número de palestras foi observado para a especialidade de Dentística (22,3%), seguido por Prótese Dental (18,3%). Aproximadamente um terço das palestras envolviam algum aspecto estético, com porcentagens entre 71,9 a 78,6% para as duas especialidades com mais palestras. Em relação ao gênero do palestrante, a inequidade foi maior para palestras envolvendo estética (81,6% de homens) que para tópicos não relacionadas à estética (66,7%). Mais palestrantes do sexo masculino que feminino foram observados para todas as especialidades. A maior discrepância entre os gêneros foi observada para Odontopediatria, uma especialidade com 62,4% dos palestrantes do sexo masculino, embora apenas 10,6% dos especialistas registrados no CFO eram homens. Como conclusão, os congressos de Odontologia Brasileiros parecem preferir palestras abordando tópicos de estética e palestrantes do sexo masculino.

Preheated restorative composite resin for luting ceramic laminate veneers: An optimized technique report.

Resin cements are traditionally used to lute ceramic laminate veneers due to their lower viscosity, which facilitates a fast restoration seating. However, resin cements have lower mechanical properties compared to restorative composite resins. Thus, restorative composite resin is an alternative luting agent with lower marginal degradation as a potential advantage for clinical longevity. This article presents an application of preheated restorative composite resin for adhesive luting of laminate veneers with a predictable clinical technique for seating and marginal quality. By addressing important factors that influence film thickness, the predictable presented workflow should overcome this major concern when luting with restorative composite resin, therefore enabling the benefits of using a restorative material with better mechanical properties without the drawback of higher film thickness. Considering the clinical evidence that the adhesive interface between the dental substrate and restoration is the weak link of adhesive indirect restorations, bonding the restoration with preheated restorative composite resins (PRCR) may provide an interface filled with a restorative resin material, presenting optimized mechanical properties. Key words:Resin cements, ceramic laminate veneers.

Development of functional fillers as a self-healing system for dental resin composite.

OBJECTIVES: To evaluate the incorporation of repairing capsules containing different monomers and polymerization modulators on the self-healing efficiency of an experimental photopolymerizable resin-based composite. METHODS: Self-healing capsules containing different monomers and polymerization modulators were prepared by emulsion polymerization: TCDHEPT (TEGDMA and DHEPT), BTCDHEPT (Bis-GMA, TEGDMA, and DHEPT), and BTCBPO (Bis-GMA, TEGDMA, and BPO). The capsules were analyzed through Fourier transform infrared spectroscopy and scanning electron microscopy. The capsules were added into experimental photopolymerizable resin composites establishing the following groups: ER (Control without capsules), ER+BPO, ER+BPO+TCDHEPT, and ER+BTCBPO+BTCDHEPT. Filtek Z350 resin composite (3 M ESPE) was used as a commercial reference. The materials were tested for degree of conversion (DC), flexural strength (σf), elastic modulus (Ef), fracture toughness (virgin KIC), self-healing efficiency (healed KIC), and roughness. For statistical analysis, the significance value was established at an a = 0.05 level. RESULTS: When compared to the control material, the incorporation of repairing capsules did not affect DC, σf, and Ef. Fracture toughness was statistically similar between the experimental groups (p ≤ 0.05). Healed KIC was statistically different between the groups ER+TCDHEP and ER+BTCBPO+BTCDHEPT; the self-healing efficiency was higher for ER+TCDHEPT. Surface roughness was statistically similar among all groups. CONCLUSIONS: The use of self-healing capsules promoted repair of the material. Studies with material aging after the self-healing process are necessary to better demonstrate the effectiveness of this system. CLINICAL SIGNIFICANCE: The self-healing system seemed to be a promising technology to be used in self-repaired restorative materials, which may prevent restoration fractures.

Impact of COVID-19 on gender gap in dental publications: a retrospective cohort with three Brazilian journals.

This was a retrospective cohort study to investigate the impact of COVID-19 pandemic on the gender gap in articles submitted to three international dental journals based in Brazil. All submissions performed to Brazilian Dental Journal, Brazilian Oral Research, and Journal of Applied Oral Science before (2019) and during the pandemic (2020) were assessed. Gender of the first, last, and corresponding authors were collected. Other variables collected were journal, continent studied by authors and stage of their careers (classified according to authors' highest degree), and final decision reached in the article. Absolute and relative frequencies with 95% confidence intervals, Pearson's Chi-square tests, and Fisher's Exact test were used (α = 0.05). In total, 4,726 unique submissions were analyzed. A higher proportion of early-career authors was observed during the pandemic (44.8% to 49.3%, p = 0.021). Most articles were rejected but without association with gender. Increased proportion of male first authors from before to during the pandemic was observed (39% to 42.1%, p = 0.034). Drop in the proportion of articles with women as first authors was observed for researchers in their early- (65.9% to 58.8%, p = 0.02) and mid-career stages (63% to 55.8%, p = 0.014). Reduction in women as first authors was observed during the pandemic in South and Central Americas (66.7% to 61.5%, p = 0.010), and when the last author was a female, or the corresponding author was a male. In conclusion, a disproportionate impact on female dental researchers in submitting articles in the period from before to during the pandemic was observed when considering first authorship, suggesting that the COVID-19 may have increased the gender inequality in dental science.

Impact of COVID-19 on gender gap in dental publications: a retrospective cohort with three Brazilian journals

Abstract This was a retrospective cohort study to investigate the impact of COVID-19 pandemic on the gender gap in articles submitted to three international dental journals based in Brazil. All submissions performed to Brazilian Dental Journal, Brazilian Oral Research, and Journal of Applied Oral Science before (2019) and during the pandemic (2020) were assessed. Gender of the first, last, and corresponding authors were collected. Other variables collected were journal, continent studied by authors and stage of their careers (classified according to authors' highest degree), and final decision reached in the article. Absolute and relative frequencies with 95% confidence intervals, Pearson's Chi-square tests, and Fisher's Exact test were used (α = 0.05). In total, 4,726 unique submissions were analyzed. A higher proportion of early-career authors was observed during the pandemic (44.8% to 49.3%, p = 0.021). Most articles were rejected but without association with gender. Increased proportion of male first authors from before to during the pandemic was observed (39% to 42.1%, p = 0.034). Drop in the proportion of articles with women as first authors was observed for researchers in their early- (65.9% to 58.8%, p = 0.02) and mid-career stages (63% to 55.8%, p = 0.014). Reduction in women as first authors was observed during the pandemic in South and Central Americas (66.7% to 61.5%, p = 0.010), and when the last author was a female, or the corresponding author was a male. In conclusion, a disproportionate impact on female dental researchers in submitting articles in the period from before to during the pandemic was observed when considering first authorship, suggesting that the COVID-19 may have increased the gender inequality in dental science.

Physicochemical characterization of two bulk fill composites at different depths.

OBJECTIVES: This study analyzed the physical-chemical behavior of 2 bulk fill resin composites (BFCs; Filtek Bulk Fill [FBF], and Tetric-N-Ceram Bulk Fill [TBF]) used in 2- and 4-mm increments and compared them with a conventional resin composite (Filtek Z250). MATERIALS AND METHODS: Flexural strength and elastic modulus were evaluated by using a 3-point bending test. Knoop hardness was measured at depth areas 0-1, 1-2, 2-3, and 3-4 mm. The translucency parameter was measured using an optical spectrophotometer. Real-time polymerization kinetics was analyzed using Fourier transform infrared spectroscopy. RESULTS: Flexural strength was similar among the materials, while TBF showed lower elastic modulus (Z250: 6.6 ± 1.3, FBF: 6.4 ± 0.9, TBF: 4.3 ± 1.3). The hardness of Z250 was similar only between 0-1 mm and 1-2 mm. Both BFCs had similar hardness until 2-3 mm, and showed significant decreases at 3-4 mm (FBF: 33.45 ± 1.95 at 0-1 mm to 23.19 ± 4.32 at 3-4 mm, TBF: 23.17 ± 2.51 at 0-1 mm to 15.11 ± 1.94 at 3-4 mm). The BFCs showed higher translucency than Z250. The polymerization kinetics of all the materials were similar at 2-mm increments. At 4-mm, only TBF had a similar degree of conversion compared with 2 mm. CONCLUSIONS: The BFCs tested had similar performance compared to the conventional composite when used in up to 2-mm increments. When the increment was thicker, the BFCs were properly polymerized only up to 3 mm.

Color assessment of resin composite by using cellphone images compared with a spectrophotometer.

OBJECTIVES: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone. MATERIALS AND METHODS: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters. The color of the specimens was measured in the images using RGB system and converted to CIELab system using image processing software. Whiteness index (WID) and color differences (ΔE00) were calculated for each color measurement method. For the cellphone, the ΔE00 was calculated between the pairs of shades in separate images and in the same image. Data were analyzed using 2-way repeated-measures analysis of variance (α = 0.05). Linear regression models were used to predict the reference ΔE00 values of those calculated using color measured in the images. RESULTS: Images captured with the cellphone resulted in different WID values from the spectrophotometer only for shades A3 and A4. No difference to the reference ΔE00 was observed when individual images were used. In general, a similar ranking of ΔE00 among resin composite shades was observed for all methods. Stronger correlation coefficients with the reference ΔE00 were observed using individual than pairwise images. CONCLUSIONS: This study showed that the use of cellphone images to measure the color difference seems to be a feasible alternative providing outcomes similar to those obtained with the spectrophotometer.

Intraradicular Dentin Biomodification with Natural Agents for Bonding Glass-fiber Posts.

PURPOSE: To evaluate the effects of pretreatment with different crosslinking agents on glass-fiber-post adhesive luting. MATERIALS AND METHODS: Single-rooted human teeth (n = 20) were randomly assigned to four groups: proanthocyanidins (PA) from grape-seed extract, cardol and cardanol (separated from cashew nut-shell liquid) and negative control (hydroethanolic solution). The solutions were applied on 37% phosphoric acid-etched dentin for 60 s. Glass-fiber posts were cemented using a three-step etch-and-rinse adhesive (Scotchbond Multi-Purpose, 3M Oral Care) and composite cement (RelyX ARC, 3M Oral Care). Slices for the push-out bond strength test were cut and tested after 24-h or 6-month storage in distilled water. The dentin underlying the adhesive layer was analyzed by micro-Raman spectroscopy to evaluate vibrational formation of collagen crosslinks. Three additional slices per group were also made and the adhesive in-situ degree of conversion (DC) was analyzed by micro-Raman spectroscopy. The results were analyzed using two-way ANOVA and Tukey's test (p < 0.05). RESULTS: No statistically significant changes in bond strength were found over time for any of the groups, except with cardol, which increased bond strength (8.4 ± 3.9 MPa at 24 h to 15.0 ± 2.9 MPa after 6 months, p < 0.001) after aging. The formation of peaks at 1117 cm-1 and 1235 cm-1 showed the presence of collagen crosslinks for all three biomodification agents. The DC outcomes showed no statistically significant differences between groups (p = 0.514). CONCLUSION: Biomodification agents did not impair adhesive polymerization. Cardol demonstrated a positive influence on intraradicular dentin bonding for glass-fiber post luting.

Polywave And Monowave Light-Curing Units Effects On Polymerization Efficiency Of Different Photoinitiators / Efeito Da Unidade De Cura Por Luz Polywave E Monowave Na Eficiência De Polimerização De Diferentes Fotoiniciadores

Objective: The objective of this study was to characterize and correlate the absorption spectra of three photoinitiators [camphorquinone (CQ), diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO) and phenylbis (2,4,6-trimethylbenzoyl)-phosphine oxide (BAPO)], using second or third-generation light curing units (LCU), and to evaluate the degree of conversion and the physical properties of an experimental resin adhesive. Material and methods: Second-generation (Radii-cal® and Emitter D®) and third-generation (Valo® Cordless and Bluephase N®) LCU were assessed regarding spectrum and irradiance rate of emitted light. Also, the photoinitiators (CQ, TPO and BAPO) were characterized by a light absorption spectrum assessed by UV-Vis spectroscopy, degree of conversion and yellowing effect. Statistical analyzes considered two-way ANOVA and post-hoc Tukey test. Results: BAPO presented higher reactivity compared to TPO. Regarding degree of conversion of the photoinitiators activated by different light-curing units, the Emitter D® device promoted a high degree of conversion. BAPO presented the highest yellowing effect values. Conclusions: The emission and absorption characteristics of the photoinitiators were different. The polymerization reaction activated by the second-generation light-curing unit was reduced when using an experimental resin with photoinitiator TPO, and the third-generation light-curing unit showed a higher polymerization potential regardless of the photoinitiator. (AU)

Objetivo: Caracterizar e correlacionar os espectros de absorção de três fotoiniciadores [canforoquinona (CQ), difenil 2,4,6-trimetilbenzil óxido de fosfina (TPO) e óxido de di (2,4,6-trimetilbenzil) difenil fosfina (BAPO)], com unidades de fotoativação (LCU) de segunda ou terceira geração, e avaliar o grau de conversão e as propriedades físicas de um adesivo experimental. Material e métodos: LCU de segunda geração (Radii-cal® e Emitter D®) e terceira geração (Valo® Cordless e Bluephase N®) foram avaliadas quanto ao espectro e taxa de irradiância da luz emitida. Além disso, os fotoiniciadores (CQ, TPO e BAPO) foram caracterizados por um espectro de absorção de luz avaliado por espectroscopia UV-Vis, avaliado o grau de conversão dos adesivos e efeito de amarelamento. A análise estatística empregada foi ANOVA duas vias e teste post-hoc de Tukey. Resultados: BAPO apresentou maior reatividade comparado ao TPO. Em relação ao grau de conversão dos fotoiniciadores ativados por diferentes aparelhos fotopolimerizadores, o dispositivo Emitter D® promoveu um alto grau de conversão. BAPO apresentou os maiores valores de efeito de amarelamento. Conclusões: As características de emissão e absorção dos fotoiniciadores foram diferentes. A reação de polimerização ativada pelas unidades de fotopolimerização de segunda geração foi reduzida com o uso de uma resina experimental com fotoiniciador TPO. As unidades de fotopolimerização de terceira geração apresentaram maior potencial de polimerização independentemente do fotoiniciador. (AU)

A Bibliometric Analysis of Articles Published in Brazilian Dental Journal over 30 years.

This study assessed bibliometric characteristics of all articles published in Brazilian Dental Journal (BDJ) in its 30 years of existence (1990-2019) and factors associated with citation rates. A document search was carried out in Scopus in December, 2019 and information about the articles were exported, including citations. Type of study and main subject in each article were categorized. Number of citations was categorized in tertiles. Logistic regression models were used to assess the association between variables related to articles' characteristics and number of citations. In 30 years, 1705 articles were published and 18507 citations received, with average 57 articles and 334 pages published yearly and 10.9 cites/doc. The most frequent types of study were laboratorial (63%), clinical (18.5%), and case reports (11%); the main subjects were dental materials (21.6%), endodontics (19.3%), and oral pathology/stomatology (13.1%). Most articles had origin in Brazil (90%), followed by USA (4.6%) and UK (1.5%). Aside from BDJ, Journal of Endodontics (3.5%) and International Endodontic Journal (2.2%) were journals that most often cited BDJ. Main origins of citations were Brazil (36.7%), USA (10.6%), and India (9%). Older articles had higher odds to be highly cited (12% increase/year), longer articles had lower odds (9% decrease/page). Narrative reviews and epidemiological studies were associated with more citations and systematic reviews with less citations. In conclusion, BDJ covered many subjects and study types in 30 years, showing increased growth in international audience. The journal may be regarded as one of the leading Brazilian journals in dentistry published in English.

A Bibliometric analysis of articles published in Brazilian Dental Journal over 30 years

Abstract This study assessed bibliometric characteristics of all articles published in Brazilian Dental Journal (BDJ) in its 30 years of existence (1990-2019) and factors associated with citation rates. A document search was carried out in Scopus in December, 2019 and information about the articles were exported, including citations. Type of study and main subject in each article were categorized. Number of citations was categorized in tertiles. Logistic regression models were used to assess the association between variables related to articles' characteristics and number of citations. In 30 years, 1705 articles were published and 18507 citations received, with average 57 articles and 334 pages published yearly and 10.9 cites/doc. The most frequent types of study were laboratorial (63%), clinical (18.5%), and case reports (11%); the main subjects were dental materials (21.6%), endodontics (19.3%), and oral pathology/stomatology (13.1%). Most articles had origin in Brazil (90%), followed by USA (4.6%) and UK (1.5%). Aside from BDJ, Journal of Endodontics (3.5%) and International Endodontic Journal (2.2%) were journals that most often cited BDJ. Main origins of citations were Brazil (36.7%), USA (10.6%), and India (9%). Older articles had higher odds to be highly cited (12% increase/year), longer articles had lower odds (9% decrease/page). Narrative reviews and epidemiological studies were associated with more citations and systematic reviews with less citations. In conclusion, BDJ covered many subjects and study types in 30 years, showing increased growth in international audience. The journal may be regarded as one of the leading Brazilian journals in dentistry published in English.

Resumo Este estudo avaliou as características bibliométricas de todos os artigos publicados no Brazilian Dental Journal (BDJ) em seus 30 anos de existência (1990-2019) e fatores associados com taxas de citação. Uma busca pelos documentos foi realizada no Scopus em Dezembro de 2019 e informações acerca dos artigos foram exportadas, incluindo citações. Tipo de estudo e principal assunto em cada artigo foram categorizados. Número de citações foi categorizado em tercis. Modelos de regressão logística foram usados para avaliar a associação entre as variáveis relacionadas às características dos artigos e o número de citações. Em 30 anos, 1705 artigos foram publicados e 18507 citações recebidas, com média de 57 artigos e 334 páginas publicadas ao ano e 10,9 citações/documento. Os tipos de estudo mais frequentes foram laboratorial (63%), clínico (18,5%) e relato de caso (11%); os principais assuntos foram materiais dentários (21,6%), endodontia (19,3%) e patologia oral/estomatologia (13,1%). A maioria doas artigos teve origem do Brasil (90%), seguido dos EUA (4,6%) e Reino Unido (1,5%). Além do BDJ, Journal of Endodontics (3,5%) e International Endodontic Journal (2,2%) foram os periódicos que mais citaram o BDJ. As principais origem das citações foram Brasil (36,7%), EUA (10,6%) e Índia (9%). Artigos mais antigos tiveram maiores chances de serem altamente citados (aumento de 12% ao ano), artigos mais longos tiveram menores chances (redução de 9% por página). Revisões narrativas e estudos epidemiológicos foram associados com mais citações e revisões sistemáticas com menos citações. Em conclusão, o BDJ cobriu diversos assuntos e tipos de estudo em 30 anos, mostrando contínuo crescimento na audiência internacional. O periódico pode ser considerado um dos líderes entre as revistas brasileiras de odontologia publicadas em inglês.

Bond Stability of Universal Adhesives Applied To Dentin Using Etch-And-Rinse or Self-Etch Strategies.

This study evaluated the immediate and 6-month dentin bond strength of universal adhesives used in etch-and-rinse or self-etch bonding strategies. The adhesives tested were Ambar Universal, G-Bond, Single Bond Universal, Tetric N-Bond Universal, and Ybond Universal. Gold standard adhesives (Scotchbond Multipurpose Plus and Clearfil SE Bond) were controls. Microtensile dentin bond strength (n=5 teeth), pH, and C=C conversion (n=3) were evaluated. Data were analyzed at α=0.05. All adhesives showed differences in pH. Ybond had intermediately strong aggressiveness, whereas the others were ultra-mild. The C=C conversion was different in most adhesives. In the etch-and-rinse strategy, all adhesives showed similar results generally except for G-Bond, which had lower bond strength than most adhesives. G-Bond and Tetric-N-Bond showed lower bond strengths after 6 months compared with 24 h, whereas the other adhesives had stable dentin bonds. In the self-etch strategy, G-Bond had lower bond strength than most adhesives. After 6 months, Ambar was the only adhesive showing lower dentin bond strength compared with 24 h. Most adhesives had discreet drops in bond strength during aging when used in the self-etch strategy. The failure modes were also material dependent, with a general pattern of increased adhesive and/or pre-testing failures after storage. In conclusion, the bonding performance of universal adhesives to dentin is material dependent. Most adhesives had stable dentin bonds with results comparable to the gold standard materials, particularly when applied in the self-etch mode. In general, it seems the use of universal adhesives in dentin should not be preceded by phosphoric acid etching.

Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use.

The aim of this study was to evaluate the influence of three low-cost additional thermal treatments, available in the dental office, on the mechanical, chemical and optical properties of a light-cured resin composite indicated for direct restorations but used as indirect restorative. The direct resin composite TPH3 (Dentsply) was light-polymerized using a light-emitting diode curing unit and submitted to three experimental additional thermal treatments: dry heat at 170 °C for 5 min, autoclave at 121 °C for 6 min, or microwave oven at 450 W for 3 min. The resin composite without any thermal treatment was used as negative control group. An indirect resin composite (Vita CM LC, Vita Zahnfabrik) was tested as a reference. Flexural strength, elastic modulus, microhardness, degree of C=C conversion, roughness before and after simulated toothbrush abrasion, translucency parameter and color difference (ΔE00) were evaluated. Data were analyzed at α=0.05. The indirect resin composite presented lower C=C conversion and mechanical performance. The flexural strength was significantly higher in the dry oven group compared with the control. The roughness was not different among groups before or after brushing, but the thermal treatments caused an increase in C=C conversion, microhardness, and elastic modulus without affecting the translucency parameter or showing visible color alteration (ΔE00<1.8). These results suggest that the use of additional thermal methods of polymerization represents an economical and simple alternative to enhance the mechanical and chemical properties of direct resin composites when used as indirect restoratives.

Simple and low-cost thermal treatments on direct resin composites for indirect use

Abstract The aim of this study was to evaluate the influence of three low-cost additional thermal treatments, available in the dental office, on the mechanical, chemical and optical properties of a light-cured resin composite indicated for direct restorations but used as indirect restorative. The direct resin composite TPH3 (Dentsply) was light-polymerized using a light-emitting diode curing unit and submitted to three experimental additional thermal treatments: dry heat at 170 °C for 5 min, autoclave at 121 °C for 6 min, or microwave oven at 450 W for 3 min. The resin composite without any thermal treatment was used as negative control group. An indirect resin composite (Vita CM LC, Vita Zahnfabrik) was tested as a reference. Flexural strength, elastic modulus, microhardness, degree of C=C conversion, roughness before and after simulated toothbrush abrasion, translucency parameter and color difference (ΔE00) were evaluated. Data were analyzed at α=0.05. The indirect resin composite presented lower C=C conversion and mechanical performance. The flexural strength was significantly higher in the dry oven group compared with the control. The roughness was not different among groups before or after brushing, but the thermal treatments caused an increase in C=C conversion, microhardness, and elastic modulus without affecting the translucency parameter or showing visible color alteration (ΔE00<1.8). These results suggest that the use of additional thermal methods of polymerization represents an economical and simple alternative to enhance the mechanical and chemical properties of direct resin composites when used as indirect restoratives.

Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) foi fotoativada usando um diodo emissor de luz e submetida a três tratamentos térmicos adicionais experimentais: forno seco a 170 °C por 5 min, autoclave a 121 °C por 6 min ou forno de micro-ondas a 450 W por 3 min. A resina composta sem qualquer tratamento térmico adicional foi usada como grupo controle negativo. Uma resina composta indireta (Vita CM LC, Vita Zahnfabrik) foi testada como referência comercial. Resistência à flexão, módulo de elasticidade, microdureza, grau de conversão de C=C, rugosidade antes e após abrasão por escovação simulada, parâmetro de translucidez e diferença de cor (ΔE00) foram avaliados. Os dados foram analisados considerando α=0.05. A resina composta indireta apresentou menor conversão de C=C e desempenho mecânico. A resistência à flexão foi significativamente mais alta no grupo forno seco comparado ao controle. A rugosidade não foi diferente entre os grupos antes ou após a escovação, porém os tratamentos térmicos adicionais causaram aumento na conversão de C=C, microdureza e módulo de elasticidade, sem afetar o parâmetro de translucidez ou mostrar alteração de cor visível (ΔE00<1,8). Estes resultados sugerem que o uso de métodos térmicos adicionais de polimerização representam alternativa econômica e simples para aprimorar as propriedades mecânicas e químicas de resinas compostas diretas quando utilizadas como restauradores indiretos.

Top-100 Most Cited Dental Articles with Authors from Brazil.

This study analyzes the characteristics of the top-100 most cited articles published in international dental journals with at least one coauthor affiliated to Brazil. A search in Scopus database for articles published between 1996 and 2017 was carried out in the 178 journals belonging to the category "Dentistry" identified in SCImago Journals & Country Rank. From the top-100 most cited articles, variables related to the journal, article, and authors were collected. Annual citation averages (ACA) and relative citation ratios (RCR) were calculated. Data were analyzed descriptively. There were 75 original reports and 25 reviews in the sample. The number of citations ranged between 124 and 657 (mean=202, median=168). The papers were published in 31 different journals (46% in only four journals), none based in Brazil. The most frequent subjects (61%) were Dental Materials, Endodontics, and Periodontology, which accounted for 63.6% of the total citations. The subject with the highest ACA was Oral and Maxillofacial Surgery and the subject with the highest RCR was Oral Radiology. Only 12 articles were cited more than 300 times. International collaboration was present in 61 articles and funding was reported in 49 articles. The first author was from Brazil in 70% and corresponding author in 55% of the papers. Southeast (83%) and South (20%) were the regions of Brazil with most presence of coauthors. This top-100 list is presented to provide an overview of the most cited articles and aid in supporting further analyses regarding publication and citation behaviors of Brazilian dentistry.

Physicochemical Properties and Microshear Bond Strength of Experimental Self-adhesive Resin Cements to Dentin or Yttria-stabilized Tetragonal Zirconia Polycrystal.

PURPOSE: To determine the degree of conversion (DC), physicochemical properties, and microshear bond strength (µSBS) of experimental self-adhesive resin cements (SARCs) to dentin and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. MATERIALS AND METHODS: Dual-curing cements were formulated with UDMA, HEMA, bis-GMA, and TEG-DMA as the organic matrix. 2MP (bis 2-(methacryloyloxy)-ethyl-phosphate) and GDMAP (1,3-glycerol dimethacrylate phosphate) were added to impart self-adhesive characteristics. A control group was formulated without self-etch methacrylates. Silanized particles were incorporated. Photoactivation was carried out using an LED light-curing unit (1200 mW/cm2) for 20 s. Infrared spectroscopy assessed the DC immediately and after 24 h. pH was analyzed in real time and recorded after 48 h. Water sorption (Wsp), water solubility (Wsl), and film thickness measurements followed ISO 4049. µSBS of the cements to dentin and Y-TZP was evaluated immediately and after 3 months of water storage. Y-TZP was also tested without a surface treatment and after tribochemical silica coating with subsequent application of a silane agent. The fractures patterns were classified as adhesive, cohesive, and mixed. Data were submitted to analyses of variance and Tukey's tests (α = 0.05). RESULTS: Control (91.7%) and 2MP (92.0%) groups generated the highest DC after 24 h. 2MP (pH = 3.6) showed the lowest pH followed by GDMAP (pH = 4.7) and control (pH = 6.4) after 48 h. The control cement exhibited lower Wsp (41.0 µg/mm3) and Wsl (4.3 µg/mm3) than the other groups. Film thickness was statistically similar (p = 0.266) for all cements. Control (27.0 MPa) and GDMAP (24.1 MPa) showed higher µSBS to dentin than 2MP (13.7 MPa) after water storage. Mixed fractures were predominant in dentin. For all cements, the µSBS to Y-TZP was < 3.0 MPa after water storage, independent of the surface treatment. CONCLUSION: The results of DC, pH, Wsp and Wsl were material dependent. Only the film thickness was statistically similar for all groups. The cement formulated with GDMAP maintained the bond strengths to dentin even after aging. However, none of the groups were able to generate satisfactory bond strength to Y-TZP, independent of the surface treatment.

Industry sponsorship bias in clinical trials in implant dentistry: Systematic review and meta-regression.

AIM: Industry sponsorship might distort the conduct and findings of studies in a large range of medical disciplines. The objective of this study was to assess whether industry sponsorship bias is present in randomized controlled trials (RCTs) on dental implants. MATERIAL AND METHODS: Two databases were searched (MEDLINE; Web of Science) to identify RCTs published between 1996 and 2016 assessing different implant systems, components or techniques, such as implant-abutment connections, geometries, surfaces, loading protocols or regions of placement. Studies' sponsorship status was classified as unclear, non-sponsored or sponsored. Our outcome was marginal bone loss per year (MBL/year) of follow-up. Random-effects meta-analysis of MBL/year with subgroup analysis according to sponsorship status was performed. Moreover, multivariable stepwise-selection meta-regression was performed to assess whether sponsorship status, among other covariates, was associated with MBL/year. RESULTS: One hundred and two RCTs (4,775 patients, 8,806 implants) were included. Overall mean (95% confidence interval) MBL/year was 0.74 mm (95% CI 0.67/0.82). There was no significant difference in MBL/year among sponsorship categories; unclear: 0.64 (95% CI 0.37/0.91); non-sponsored: 0.65 (095% CI 0.55/0.75); and sponsored: 0.82 (95% CI 0.71/0.94). CONCLUSION: Meta-regression did not demonstrate a significant association of MBL/year with sponsorship status or other covariates was found. We did not detect significant sponsorship bias in RCTs on dental implants.