Novel solid inks based on beeswax, graphite and graphene applied to the fabrication of paper-based sensor for galactose determination.

In this study, we present for the first time a simple and novel method for the fabrication of paper-based electrochemical sensors. The device development was carried out in a single stage with a standard wax printer. Hydrophobic zones were delimited with commercial solid ink, while electrodes were generated using new composite solid inks of graphene oxide/graphite/beeswax (GO/GRA/beeswax) and graphite/beeswax (GRA/beeswax). Subsequently, the electrodes were electrochemically activated by applying an overpotential. Various experimental variables for the GO/GRA/beeswax composite synthesis and electrochemical system obtention were evaluated. The activation process was examined by SEM, FTIR, cyclic voltammetry, electrochemical impedance spectroscopy and contact angle measurement. These studies showed morphological and chemical changes in the electrode active surface. As a result, the activation stage considerably improved the electron transfer on the electrode. The manufactured device was successfully applied for galactose (Gal) determination. This method presented a linear relation in the Gal concentration range from 84 to 1736 µmol L-1, with a LOD of 0.1 µmol L-1. The variation within and between-assay coefficients were 5.3% and 6.8%, respectively. The strategy here exposed for paper-based electrochemical sensors design is an unprecedented alternative system and represents a promising tool for mass production of economic analytical devices.

Paper surface modification strategies employing N-SBA-15/polymer composites in bioanalytical sensor design.

In this work, different paper surface modification strategies were compared to obtain an amine functionalized SBA-15 (N-SBA-15) composite for paper-based device development. The synthesized N-SBA-15 was characterized by N2 adsorption-desorption isotherm, and infrared spectroscopy (FTIR), and it was incorporated to different polymer matrices (κ-carrageenan (CA), polyvinyl alcohol (PVA) and polyethylenimine (PEI)) for the development of the composite modified paper-based device. The retention, interactions, and morphology of the obtained composites were investigated by absorbance measurement, FTIR and scanning electron microscopy (SEM), respectively. To demonstrate the applicability of the modified paper-based device, ascorbic acid (AA) quantification was carried out. Horseradish peroxidase (HRP) was immobilized onto the modified paper surface. HRP in the presence of H2O2 catalyzes the oxidation of 10-acetyl-3,7-dyhidroxyphenoxazine (ADHP) to highly fluorescent resorufin, which was measured by LIF detector. Thus, when AA was added to the solution, it decreases the relative fluorescence signal proportionally to the AA concentration. The linear range from 50 nmol L-1 to 1500 nmol L-1 and a detection limit of 15 nmol L-1 were obtained for AA quantitation. The obtained results allowed us to conclude that N-SBA-15/PEI composite could be considered an excellent choice for the paper-based device modification procedure due to its inherent simplicity, low cost, and sensitivity.

Paper-based enzymatic platform coupled to screen printed graphene-modified electrode for the fast neonatal screening of phenylketonuria.

INTRODUCTION: The PKU is an inborn error of amino acid metabolism, in which phenylalanine (Phe) accumulated in the blood causing alterations at the central nervous system. We report a novel paper-based enzymatic platform coupled to screen printed graphene-modified electrode for the neonatal screening of phenylketonuria (PKU0. METHODS: The paper-based analytical device coupled to electrochemical detection (EPAD) is based on the use of paper microzones modified with phenylalanine dehydrogenase enzyme (PheDH). The modified PADs were placed on the surface of an electrode modified with electrochemically reduced graphene (ERGO). PheDH in the presence of NAD+ catalyzes the reversible deamination of Phe to form phenylpyruvate, ammonia, and NADH. The electrochemical oxidation of NADH was monitored by differential pulse amperometry (DPA) at 0.6 V. The method was linear in the concentration range from 1 to 600 µmol/L of Phe with a LOQ of 1 µmol/L and LOD of 0.2 µmol/L. Within day precision was 5.7% across 3 levels of control samples. Between-day precision was 8.3%. The comparison with the standard Phe enzyme assay kit showed good agreement. The time required for the overall assay was <5 min. The non-sophisticated equipment required, the short assay time and the appropriate LOQ and LOD achieved by our EPAD make it an attractive and easy to use alternative compared to existing methods applied to the screening of PKU in neonatal samples.