Coordination of a Phosphine-Tethered Aminoborane to Group 10 Metals.

While π-complexes of C=C bonds are ubiquitous in organometallic chemistry, analogous complexes of the isoelectronic but strongly polarized B=N double bond of aminoboranes are extremely scarce. To address this gap, a diphosphine-aminoborane ligand (PhDPBAiPr) is introduced and its coordination with group 10 metals is investigated. The B=N bond does not coordinate to the metal in Pt(0) and Pd(II) complexes. In contrast, side-on coordination of the B=N bond is observed in the Ni(0) complex (PhDPBAiPr)Ni(NCPh), and the X-ray crystal structure reveals B-N bond elongation compared to the free ligand. The choice of co-ligand strongly influences the presence or absence of side-on coordination at Ni(0) as evidenced by NMR spectroscopy. While the B=N π-complex is geometrically similar to C=C analogues, a bonding analysis reveals that the interaction of the B=N motif with the electron-rich Ni(0) center is best described as 3c4e hyperbond, in which Ni and N are competing for the empty orbital on B.

Reactivity of Nickel Complexes Bearing P(C=X)P Ligands (X = O, N) Toward Diazoalkanes: Evidence for Phosphorus Ylide Intermediates.

Nickel carbenes are attracting attention for the development of more sustainable catalysts, among others, for cyclopropanation. Intramolecular trapping of a nickel carbene intermediate with an olefin incorporated in a P(C=C)P Ni pincer complex had previously allowed the isolation of a nickelacyclobutane intermediate and a detailed characterization of its reactivity. Herein, we report the reactivity of related nickel pincer complexes bearing a ketone P(C=O)P or an imine P(C=N)P with diazoalkanes as the carbene precursor. The observed reactivity suggests, in both cases, the reaction of the transient nickel carbene with one of the phosphine arms to form phosphorus ylides that subsequently react with the unsaturated backbone. Density functional theory (DFT) calculations are used to shed light on the mechanisms of these reactions.

Polar X-H Bond (X=O, S, N) Activation at a Cage Silanide.

Low-valent silicon compounds such as neutral silylenes display versatile reactivity for the activation of small molecules. In contrast, their anionic congeners silanides ([R3 Si- ]) have primarily been investigated for their nucleophilic reactivity. Here we show that incorporating a silanide center in a bicyclic cage structure allows for formal oxidative addition of polar element-hydrogen bonds (RX-H, R=aromatic residue, X=O, S, NH). The resulting hydrosilicates were isolated and characterized structurally and spectroscopically. Density Functional Theory (DFT) calculations and experimental observations support an ionic mechanism for RX-H bond activation. Finally, the reactivity of the RS-H bond adduct was further investigated, revealing that it behaves as a Lewis pair upon facile heterolytic cleavage of the Si-S bond.

Cooperative H2 activation at a nickel(0)-olefin centre.

Catalytic olefin hydrogenation is ubiquitous in organic synthesis. In most proposed homogeneous catalytic cycles, reactive M-H bonds are generated either by oxidative addition of H2 to a metal centre or by deprotonation of a non-classical metal dihydrogen (M-H2) intermediate. Here we provide evidence for an alternative H2-activation mechanism that instead involves direct ligand-to-ligand hydrogen transfer (LLHT) from a metal-bound H2 molecule to a metal-coordinated olefin. An unusual pincer ligand that features two phosphine ligands and a central olefin supports the formation of a non-classical Ni-H2 complex and the Ni(alkyl)(hydrido) product of LLHT, in rapid equilibrium with dissolved H2. The usefulness of this cooperative H2-activation mechanism for catalysis is demonstrated in the semihydrogenation of diphenylacetylene. Experimental and computational mechanistic investigations support the central role of LLHT for H2 activation and catalytic semihydrogenation. The product distribution obtained is largely determined by the competition between (E)-(Z) isomerization and catalyst degradation by self-hydrogenation.

Reactions of Nickel(0)-Olefin Pincer Complexes with Terminal Alkynes: Cooperative C-H Bond Activation and Alkyne Coupling.

Metal-ligand cooperation can facilitate the activation of chemical bonds, opening reaction pathways of interest for catalyst development. In this context, olefins occupying the central position of a diphosphine pincer ligand (PC=CP) are emerging as reversible H atom acceptors, e.g., for H2 activation. Here, we report on the reactivity of nickel complexes of PC=CP ligands with a terminal alkyne, for which two competing pathways are observed. First, cooperative and reversible C-H bond activation generates a Ni(II) alkyl/alkynyl complex as the kinetic product. Second, in the absence of a bulky substituent on the olefin, two alkyne molecules are incorporated in the ligand structure to form a conjugated triene bound to Ni(0). The mechanisms of these processes are studied by density functional theory calculations supported by experimental observations.

Homoleptic Fe(III) and Fe(IV) Complexes of a Dianionic C3-Symmetric Scorpionate.

High-valent iron species have been implicated as key intermediates in catalytic oxidation reactions, both in biological and synthetic systems. Many heteroleptic Fe(IV) complexes have now been prepared and characterized, especially using strongly π-donating oxo, imido, or nitrido ligands. On the other hand, homoleptic examples are scarce. Herein, we investigate the redox chemistry of iron complexes of the dianonic tris-skatylmethylphosphonium (TSMP2-) scorpionate ligand. One-electron oxidation of the tetrahedral, bis-ligated [(TSMP)2FeII]2- leads to the octahedral [(TSMP)2FeIII]-. The latter undergoes thermal spin-cross-over both in the solid state and solution, which we characterize using superconducting quantum inference device (SQUID), Evans method, and paramagnetic nuclear magnetic resonance spectroscopy. Furthermore, [(TSMP)2FeIII]- can be reversibly oxidized to the stable high-valent [(TSMP)2FeIV]0 complex. We use a variety of electrochemical, spectroscopic, and computational techniques as well as SQUID magnetometry to establish a triplet (S = 1) ground state with a metal-centered oxidation and little spin delocalization on the ligand. The complex also has a fairly isotropic g-tensor (giso = 1.97) combined with a positive zero-field splitting (ZFS) parameter D (+19.1 cm-1) and very low rhombicity, in agreement with quantum chemical calculations. This thorough spectroscopic characterization contributes to a general understanding of octahedral Fe(IV) complexes.

Characterization of a Proposed Terminal Iron(III) Nitride Intermediate of Nitrogen Fixation Stabilized by a Trisphosphine-Borane Ligand.

Terminal iron nitrides (Fe≡N) have been proposed as intermediates of Fe-mediated nitrogen fixation, and well-defined synthetic iron nitrides have been characterized in high oxidation states, including FeIV , FeV , and FeVI . This study reports the generation and low temperature characterization of a terminally bound iron(III) nitride, P3 B Fe(N) (P3 B =tris(o-diisopropylphosphinophenyl)borane), which is a proposed intermediate of iron-mediated nitrogen fixation by the P3 B Fe-catalyst system. CW- and pulse EPR spectroscopy (HYSCORE and ENDOR), supported by DFT calculations, help to define a 2 A ground state electronic structure of this C3 -symmetric nitride species, placing the unpaired spin in a sigma orbital along the B-Fe-N vector; this electronic structure is distinct for an iron nitride. The unusual d5 -configuration is stabilized by significant delocalization (≈50 %) of the unpaired electron onto the axial boron and nitrogen ligands, with a majority of the spin residing on boron.

Divergent Reactivity of an Isolable Nickelacyclobutane.

Nickelacyclobutanes are mostly invoked as reactive intermediates in the reaction of nickel carbenes and olefins to yield cyclopropanes. Nevertheless, early work suggested that other decomposition routes such as ß-hydride elimination and even metathesis could be accessible. Herein, we report the isolation and characterization of a stable pentacoordinated nickelacyclobutane incorporated in a pincer complex. The coordination of different coligands to the nickelacyclobutane determines its selective decomposition along cyclopropanation, metathesis or apparent ß-hydride elimination pathways. DFT calculations shed light on the mechanism of these different pathways.

Correction to "Reactivity of (Vicinal) Carbonyl Compounds with Urea".

[This corrects the article DOI: 10.1021/acsomega.9b01177.].

Strain-Modulated Reactivity: An Acidic Silane.

Compounds of main-group elements such as silicon are attractive candidates for green and inexpensive catalysts. For them to compete with state-of-the-art transition-metal complexes, new reactivity modes must be unlocked and controlled, which can be achieved through strain. Using a tris(2-skatyl)methylphosphonium ([TSMPH3 ]+ ) scaffold, we prepared the strained cationic silane [TSMPSiH]+ . In stark contrast with the generally hydridic Si-H bond character, it is acidic with an experimental pKa DMSO within 4.7-8.1, lower than in phenol, benzoic acid, and the few hydrosilanes with reported pKa values. We show that ring strain significantly contributes to this unusual acidity along with inductive and electrostatic effects. The conjugate base, TSMPSi, activates a THF molecule in the presence of CH-acids to generate a highly fluxional alkoxysilane via trace amounts of [TSMPSiH]+ functioning as a strain-release Lewis acid. This reaction involves a formal oxidation-state change from SiII to SiIV , presenting intriguing similarities with transition-metal-mediated processes.

Luminescent Colloidal InSb Quantum Dots from In Situ Generated Single-Source Precursor.

Despite recent advances, the synthesis of colloidal InSb quantum dots (QDs) remains underdeveloped, mostly due to the lack of suitable precursors. In this work, we use Lewis acid-base interactions between Sb(III) and In(III) species formed at room temperature in situ from commercially available compounds (viz., InCl3, Sb[NMe2]3 and a primary alkylamine) to obtain InSb adduct complexes. These complexes are successfully used as precursors for the synthesis of colloidal InSb QDs ranging from 2.8 to 18.2 nm in diameter by fast coreduction at sufficiently high temperatures (≥230 °C). Our findings allow us to propose a formation mechanism for the QDs synthesized in our work, which is based on a nonclassical nucleation event, followed by aggregative growth. This yields ensembles with multimodal size distributions, which can be fractionated in subensembles with relatively narrow polydispersity by postsynthetic size fractionation. InSb QDs with diameters below 7.0 nm have the zinc blende crystal structure, while ensembles of larger QDs (≥10 nm) consist of a mixture of wurtzite and zinc blende QDs. The QDs exhibit photoluminescence with small Stokes shifts and short radiative lifetimes, implying that the emission is due to band-edge recombination and that the direct nature of the bandgap of bulk InSb is preserved in InSb QDs. Finally, we constructed a sizing curve correlating the peak position of the lowest energy absorption transition with the QD diameters, which shows that the band gap of colloidal InSb QDs increases with size reduction following a 1/d dependence.

A dianionic C3-symmetric scorpionate: synthesis and coordination chemistry.

Introducing charges into ligand systems fine-tunes their electronic properties and influences the solubility of their metal complexes. Herein, we present a synthesis of a dianionic, C3-symmetric ligand combining three anionic N-donors tethered to a positively charged phosphonium center. The tris-skatylmethylphosphonium (TSMP) ligand, isolated in the form of its dipotassium salt TSMPK2, is the first dianionic homoscorpionate capable of metal exchange. The potassium cations in TSMPK2 are exchangeable for other metals, which results in rich coordination chemistry. Thus, the ligand displays a bridging µ2:κ2:κ1 coordination mode with trigonal planar Cu(i) centers in the tetrameric complex [(TSMP)Cu]44-. The κ3 mode is accessed upon addition of 1 equiv. of P(OEt)3 per Cu(i) to yield the tetrahedral monomeric complex [(TSMP)CuP(OEt)3]-. Both Fe(ii) and Ni(ii) in pyridine give octahedral high-spin κ3 complexes with composition (TSMP)M(Py)3 (M = Fe, Ni). Displacement of three pyridine ligands in (TSMP)Fe(Py)3 for a second equivalent of TSMP gives a high-spin pseudotetrahedral 2 : 1 complex [(TSMP)2Fe]2- with the ligands in κ2 coordination mode. The reduction in coordination number is likely due to electrostatic repulsion of the negatively-charged indolides as well as their weaker π-accepting character as compared to pyridine.

Mechanistic Studies of the Oxidative Addition of Aryl Halides to Ni(0) Centers Bearing Phosphine Ligands.

The oxidative addition of aryl halides is a common entry point in catalytic cycles for cross-coupling and related reactions. In the case of phosphine-supported nickel(0) fragments, the formation of reactive Ni(ii)-aryl products often competes with the production of Ni(i) species. Here, recent advances in the mechanistic understanding of these reactions are highlighted. In particular, the denticity of the supporting ligand has a significant influence on the outcome of the reaction.

Electrocatalytic Proton Reduction by a Cobalt Complex Containing a Proton-Responsive Bis(alkylimdazole)methane Ligand: Involvement of a C-H Bond in H2 Formation.

Homogeneous electrocatalytic proton reduction is reported using cobalt complex [1](BF4 )2 . This complex comprises two bis(1-methyl-4,5-diphenyl-1H-imidazol-2-yl)methane (HBMIM Ph 2 ) ligands that contain an acidic methylene moiety in their backbone. Upon reduction of [1](BF4 )2 by either electrochemical or chemical means, one of its HBMIM Ph 2 ligands undergoes deprotonation under the formation of dihydrogen. Addition of a mild proton source (acetic acid) to deprotonated complex [2](BF4 ) regenerates protonated complex [1](BF4 )2 . In presence of acetic acid in acetonitrile solvent [1](BF4 )2 shows electrocatalytic proton reduction with a kobs of ≈200 s-1 at an overpotential of 590 mV. Mechanistic investigations supported by DFT (BP86) suggest that dihydrogen formation takes place in an intramolecular fashion through the participation of a methylene C-H bond of the HBMIM Ph 2 ligand and a CoII -H bond through formal heterolytic splitting of the latter. These findings are of interest to the development of responsive ligands for molecular (base)metal (electro)catalysis.

Oxidative Addition of Aryl Halides to a Triphosphine Ni(0) Center to Form Pentacoordinate Ni(II) Aryl Species.

Oxidative addition of aryl halides to Ni(0) is a ubiquitous elementary step in cross-coupling and related reactions, usually producing a square-planar Ni(II)-aryl intermediate. Here we show that a triphosphine ligand supports oxidative addition at a tris-ligated Ni(0) center to cleanly form stable five-coordinate Ni(II)-aryl compounds. Kinetic and computational studies support a concerted, two-electron mechanism rather than radical halogen abstraction. These results support the idea that oxidative addition to triphosphine Ni(0) species may be more generally involved in Ni/phosphine catalytic systems.

Phenylglyoxaldehyde-Functionalized Polymeric Sorbents for Urea Removal from Aqueous Solutions.

For realization of a wearable artificial kidney based on regeneration of a small volume of dialysate, efficient urea removal from dialysate is a major challenge. Here a potentially suitable polymeric sorbent based on phenylglyoxaldehyde (PGA), able to covalently bind urea under physiological conditions, is described. Sorbent beads containing PGA groups were obtained by suspension polymerization of either styrene or vinylphenylethan-1-one (VPE), followed by modification of the aromatic groups of poly(styrene) and poly(VPE) into PGA. It was found that PGA-functionalized sorbent beads had maximum urea binding capacities of 1.4-2.2 mmol/g and removed ∼0.6 mmol urea/g in 8 h at 37 °C under static conditions from urea-enriched phosphate-buffered saline, conditions representative of dialysate regeneration. This means that the daily urea production of a dialysis patient can be removed with a few hundred grams of this sorbent which, is an important step forward in the development of a wearable artificial kidney.

Tailoring Cu+ for Ga3+ Cation Exchange in Cu2-xS and CuInS2 Nanocrystals by Controlling the Ga Precursor Chemistry.

Nanoscale cation exchange (CE) has resulted in colloidal nanomaterials that are unattainable by direct synthesis methods. Aliovalent CE is complex and synthetically challenging because the exchange of an unequal number of host and guest cations is required to maintain charge balance. An approach to control aliovalent CE reactions is the use of a single reactant to both supply the guest cation and extract the host cation. Here, we study the application of GaCl3-L complexes [L = trioctylphosphine (TOP), triphenylphosphite (TPP), diphenylphosphine (DPP)] as reactants in the exchange of Cu+ for Ga3+ in Cu2-xS nanocrystals. We find that noncomplexed GaCl3 etches the nanocrystals by S2- extraction, whereas GaCl3-TOP is unreactive. Successful exchange of Cu+ for Ga3+ is only possible when GaCl3 is complexed with either TPP or DPP. This is attributed to the pivotal role of the Cu2-xS-GaCl3-L activated complex that forms at the surface of the nanocrystal at the onset of the CE reaction, which must be such that simultaneous Ga3+ insertion and Cu+ extraction can occur. This requisite is only met if GaCl3 is bound to a phosphine ligand, with a moderate bond strength, to allow facile dissociation of the complex at the nanocrystal surface. The general validity of this mechanism is demonstrated by using GaCl3-DPP to convert CuInS2 into (Cu,Ga,In)S2 nanocrystals, which increases the photoluminescence quantum yield 10-fold, while blue-shifting the photoluminescence into the NIR biological window. This highlights the general applicability of the mechanistic insights provided by our work.

Reactivity of (Vicinal) Carbonyl Compounds with Urea.

Urea removal from dialysate is the major obstacle in realization of a miniature dialysis device, based on continuous dialysate regeneration in a closed loop, used for the treatment of patients suffering from end-stage kidney disease. For the development of a polymeric urea sorbent, capable of removing urea from dialysate with high binding capacities and fast reaction kinetics, a systematic kinetic study was performed on the reactivity of urea with a library of low-molecular-weight carbonyl compounds in phosphate-buffered saline (pH 7.4) at 323 K. It was found that dialdehydes do not react with urea under these conditions but need to be activated under acidic conditions and require aldehyde groups in close proximity to each other to allow a reaction with urea. Among the 31 (hydrated) carbonyl compounds tested, triformylmethane, ninhydrin, and phenylglyoxaldehyde were the most reactive ones with urea. This is attributed to the low dehydration energies of these compounds, as calculated by Gibbs free energy differences between the hydrated and dehydrated carbonyl compounds, which are favorable for the reaction with urea. Therefore, future urea sorbents should contain such functional groups at the highest possible density.

Cobalt(II) and (I) Complexes of Diphosphine-Ketone Ligands: Catalytic Activity in Hydrosilylation Reactions.

The hydrosilylation of unsaturated compounds homogeneously catalyzed by cobalt complexes has gained considerable attention in the last years, aiming at substituting precious metal-based catalysts. In this study, the catalytic activity of well-characterized CoII and CoI complexes of the pToldpbp ligand is demonstrated in the hydrosilylation of 1-octene with phenylsilane. The CoI complex is the better precatalyst for the mentioned reaction under mild conditions, at 1 mol-% catalyst, 1 h, room temperature, and without solvent, yielding 84 % of octylphenylsilane. Investigation of the substrate scope shows lower performance of the catalyst in styrene hydrosilylation, but excellent results with allylbenzene (84 %) and acetophenone (> 99 %). This catalytic study contributes to the field of cobalt-catalyzed hydrosilylation reactions and shows the first example of catalysis employing the dpbp ligand in combination with a base metal.

Enhanced Catalytic Activity of Nickel Complexes of an Adaptive Diphosphine-Benzophenone Ligand in Alkyne Cyclotrimerization.

Adaptive ligands, which can adapt their coordination mode to the electronic structure of various catalytic intermediates, offer the potential to develop improved homogeneous catalysts in terms of activity and selectivity. 2,2'-Diphosphinobenzophenones have previously been shown to act as adaptive ligands, the central ketone moiety preferentially coordinating reduced metal centers. Herein, the utility of this scaffold in nickel-catalyzed alkyne cyclotrimerization is investigated. The complex [( p-tolL1)Ni(BPI)] ( p-tolL1 = 2,2'-bis(di(para-tolyl)phosphino)-benzophenone; BPI = benzophenone imine) is an active catalyst in the [2 + 2 + 2] cyclotrimerization of terminal alkynes, selectively affording 1,2,4-substituted benzenes from terminal alkynes. In particular, this catalyst outperforms closely related bi- and tridentate phosphine-based Ni catalysts. This suggests a reaction pathway involving a hemilabile interaction of the C=O unit with the nickel center. This is further borne out by a comparative study of the observed resting states and DFT calculations.