Carrier conversion from terahertz wave to dual-wavelength near-infrared light for photonic terahertz detection in wireless communication.

THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer modulator. THz wave in the W band was detected as a stable photonic RF beat signal of 1 GHz with a signal-to-noise ratio of 20 dB via the proposed THz-to-NIR carrier conversion. In addition, the results imply the potential of the photonic detection of THz waves for wireless-to-optical seamless communication.

D-band optical modulators using electro-optic polymer waveguides and non-coplanar patch antennas.

D-band (110-170 GHz) antenna-coupled optical modulators with electro-optic (EO) polymer waveguides and non-coplanar patch antennas were fabricated using a poled EO polymer film transfer method. A carrier-to-sideband ratio (CSR) of 42.3 dB corresponding to an optical phase shift of 15.3 mrad was obtained by irradiating 150 GHz electromagnetic waves with an irradiation power density of 34.3 W/m2. Our devices and fabrication method have great potential for achieving highly efficient wireless-to-optical signal conversion in radio-over-fiber (RoF) systems.

Nanometer-precision surface metrology of millimeter-sized stepped objects using full-cascade-linked synthetic-wavelength digital holography using a line-by-line full-mode-extracted optical frequency comb.

Digital holography (DH) is a powerful tool for the surface profilometry of objects with sub-wavelength precision. In this article, we demonstrate full-cascade-linked synthetic-wavelength DH for nanometer-precision surface metrology of millimeter-sized stepped objects. 300 modes of optical frequency comb (OFC) with different wavelengths are sequentially extracted at a step of mode spacing from a 10GHz-spacing, 3.72THz-spanning electro-optic modulator OFC. The resulting 299 synthetic wavelengths and a single optical wavelength are used to generate a fine-step wide-range cascade link covering within a wavelength range of 1.54 µm to 29.7 mm. We determine the sub-millimeter and millimeter step differences with axial uncertainty of 6.1 nm within the maximum axial range of 14.85 mm.

Fiber-terahertz-fiber bridge system in the 355-GHz band using a simple optical frequency comb and a photonics-enabled receiver.

This Letter demonstrates a high-speed fiber-terahertz-fiber system in the 355-GHz band using stable optical frequency comb generation and a photonics-enabled receiver. At the transmitter, a single dual-drive Mach-Zehnder modulator is employed to generate a frequency comb by driving the modulator under an optimal condition. At the antenna site, a photonics-enabled receiver consisting of an optical local oscillator signal generator, a frequency doubler, and an electronic mixer is used to downconvert the terahertz-wave signal to the microwave band. Simple intensity modulation and a direct detection method are used for transmitting the downconverted signal to the receiver over the second fiber link. To demonstrate the proof of concept, we transmitted a 16-quadrature amplitude modulation (QAM) orthogonal frequency-division multiplexing signal over a system consisting of two radio-over-fiber links and a 4 m wireless link in the 355-GHz band and achieved a line rate of 60 Gb/s. We also successfully transmitted a 16-QAM subcarrier multiplexing single-carrier signal over the system and achieved a capacity of 50 Gb/s. The proposed system can facilitate the deployment of ultra-dense small cells in high-frequency bands in beyond-5G networks.

Thermal and Optical Properties of Porous Nanomesh Structures for Sensitive Terahertz Bolometric Detection.

Terahertz (THz) electromagnetic waves are attractive for use in nondestructive and biocompatible sensing applications. Thermal sensors are widely used for THz detection owing to the small photon energies of THz radiation, where this requires materials with low thermal conductivity and a small heat capacity to ensure the sensitive and fast operation of the sensors. In this study, we investigated the thermal and optical properties of porous nanomesh structures for sensitive THz bolometric detection. Nanometer (nm)-scale hole array structures were formed on gallium arsenide (GaAs) microelectromechanical system (MEMS) beams to improve their thermal properties. The thermal conductance of the porous MEMS beams was obtained by measuring their thermal bandwidths; it was found to decrease by as much as ~90% when the porosity (P) of the porous nanostructure was increased to ~0.69. We also measured the THz absorptance of the porous hole array structure. The results show that although the porous nanostructure has a much smaller area than the bulk material, it maintained a high coefficient of THz absorptance because the featured size was much smaller than the THz wavelength. The measured absorptance agreed well with that calculated by using the Drude model. These results demonstrate that the porous nanomesh structure is promising for developing highly sensitive THz thermal sensors.

W-band optical modulators using electro-optic polymer waveguides and patch antenna arrays.

In this study, W-band (75-110 GHz) antenna-coupled optical modulators with a cyclo-olefin polymer (COP) lower cladding, an electro-optic (EO) polymer waveguide, and a gap-embedded patch antenna array were fabricated using a transfer and bonding method of a poled EO polymer film. A carrier-to-sideband ratio (CSR) of 56 dB corresponding to an optical phase shift of 3 mrad was obtained under irradiation with 100 GHz electromagnetic waves with a power of 12.8 W/m2. Our devices have the potential to achieve highly efficient wireless-optical signal conversion in radio-over-fiber (RoF) systems.

Multicascade-linked synthetic-wavelength digital holography using a line-by-line spectral-shaped optical frequency comb.

Phase imaging without a phase wrapping ambiguity is required for wide-axial-range 3D imaging in the fields of surface topography measurement and biomedical imaging. Although multicascade-linked synthetic-wavelength digital holography (MCL-SW-DH) using an optical frequency synthesizer (OFS) is a promising method to meet this requirement, the slow switching of multiple optical wavelengths in the OFS prevents rapid imaging. In the work described in this article, a line-by-line spectral-shaped electro-optics-modulator-based optical frequency comb (EOM-OFC) is used as a light source in MCL-SW-DH to achieve rapid image acquisition. While MCL-SW-DH enables surface topography measurement with millimeter-order axial range and micrometer-order axial resolution, the line-by-line spectral-shaped EOM-OFC extracts a single narrow-linewidth OFC mode from the 10 GHz-spacing EOM-OFC at a center wavelength of 1545 nm within a spectral range of 30 nm at an interval of 500 ms. The effectiveness of the proposed MCL-SW-DH was highlighted by performing surface topography measurement with four step differences of sub-millimeter to millimeter size with an axial uncertainty of 2.08 µm in the image acquisition time of several seconds. The proposed MCL-SW-DH will be a powerful tool for 3D imaging with a wide axial range and high axial resolution.

Ultra-high-rate nonclassical light source with 50 GHz-repetition-rate mode-locked pump pulses and multiplexed single-photon detectors.

Heralded single photons (HSPs) and entangled photon pairs (EPPs) via spontaneous parametric down-conversion are essential tools for the development of photonic quantum information technologies. In this paper, we report a novel ultra-high-rate nonclassical light source realized by developing 50 GHz-repetition-rate mode-locked pump pulses and multiplexed superconducting nanowire single-photon detectors. The presence of the single-photon state in the heralded photons with our setup was indicated by the second-order intensity correlation below 1/2 at the heralding rate over 20 Mcps. Even at the rate beyond 50 Mcps, the nonclassicality was still observed with the intensity correlation below unity. Moreover, our setup is also applicable to the polarization-EPP experiment, where we obtained the maximum coincidence rate of 1.6 Mcps with the fidelity of 0.881 ± (0.254 × 10-3) to the maximally entangled state. Our versatile source could be a promising tool to explore various large-scale quantum-photonic experiments with low success probability and heavy attenuation.

High precision frequency measurement of terahertz waves using optical combs from a Mach-Zehnder-modulator-based flat comb generator.

Using a frequency-tunable optical comb generated from a Mach-Zehnder-modulator-based flat comb generator (MZ-FCG) and a nonlinear optical fiber, we demonstrated a frequency measurement of continuous terahertz wave sources with the frequency of 0.1 and 0.6 THz by an electro-optic sampling method. We clearly observed beat signals between the terahertz source and the optical two-tone extracted from the optical comb, allowing us to determine the absolute frequency. Owing to the wide comb spacing of the MZ-FCG, this method has a high potential for the high-speed measurement of the frequency of terahertz wave sources.

Terahertz-wave generation devices using electro-optic polymer slab waveguides and cyclo-olefin polymer clads.

We fabricated terahertz (THz) wave generation devices using electro-optic (EO) polymer slab waveguides and cyclo-olefin polymer (COP) clads with very small absorption loss of the THz waves based on a novel device fabrication procedure involving bonding of the poled EO polymer layer to the COP substrates. We demonstrated THz wave generation from the EO polymer slab devices using a 1.55 µm-band femtosecond fiber laser and evaluated the THz wave generation properties of the devices. Our results will lead to the development of compact, highly efficient, and ultrabroadband THz devices using EO polymers.

Efficient generation of twin photons at telecom wavelengths with 2.5 GHz repetition-rate-tunable comb laser.

Efficient generation and detection of indistinguishable twin photons are at the core of quantum information and communications technology (Q-ICT). These photons are conventionally generated by spontaneous parametric down conversion (SPDC), which is a probabilistic process, and hence occurs at a limited rate, which restricts wider applications of Q-ICT. To increase the rate, one had to excite SPDC by higher pump power, while it inevitably produced more unwanted multi-photon components, harmfully degrading quantum interference visibility. Here we solve this problem by using recently developed 10 GHz repetition-rate-tunable comb laser, combined with a group-velocity-matched nonlinear crystal, and superconducting nanowire single photon detectors. They operate at telecom wavelengths more efficiently with less noises than conventional schemes, those typically operate at visible and near infrared wavelengths generated by a 76 MHz Ti Sapphire laser and detected by Si detectors. We could show high interference visibilities, which are free from the pump-power induced degradation. Our laser, nonlinear crystal, and detectors constitute a powerful tool box, which will pave a way to implementing quantum photonics circuits with variety of good and low-cost telecom components, and will eventually realize scalable Q-ICT in optical infra-structures.

40 Gb/s W-band (75-110 GHz) 16-QAM radio-over-fiber signal generation and its wireless transmission.

The generation of a 40-Gb/s 16-QAM radio-over-fiber (RoF) signal and its demodulation of the wireless signal transmitted over free space of 30 mm in W-band (75-110 GHz) is demonstrated. The 16-QAM signal is generated by a coherent polarization synthesis method using a dual-polarization QPSK modulator. A combination of the simple RoF generation and the versatile digital receiver technique is suitable for the proposed coherent optical/wireless seamless network.

Broadband wavelength-tunable ultrashort pulse source using a Mach-Zehnder modulator and dispersion-flattened dispersion-decreasing fiber.

The broadband wavelength tunability of femtosecond pulse generation using a Mach-Zehnder-modulator-based flat-comb generator (MZ-FCG) and a dispersion-flattened dispersion-decreasing fiber (DF-DDF) was demonstrated. Near-Fourier-transform-limit picosecond pulses generated from the MZ-FCG were compressed into femtosecond pulses by adiabatic soliton compression. By tuning the wavelength of the input cw light, 200 fs, 10 GHz pulses were generated in the wavelength range of 1,535 to 1,570 nm. Such wide-range wavelength tunability was realized by both the independence of a comb-flattening condition from the inputted wavelength and the dispersion flatness of the DF-DDF.

Development of high resolution Michelson interferometer for stable phase-locked ultrashort pulse pair generation.

We developed a high resolution Michelson interferometer with a two-frequency He-Ne laser positioning system in order to stabilize the relative phase of a pulse pair. The control resolution corresponded to a 12 as time resolution or a phase of 1.5 degrees at 900 nm. This high resolution Michelson interferometer can generate a phase-locked pulse pair either with a specific relative phase such as 0 or pi radians or with an arbitrary phase. Coherent control of an InAs self-assembled quantum dot was demonstrated using the high resolution Michelson interferometer with a microspectroscopy system.

Widely repetition-tunable 200 fs pulse source using a Mach-Zehnder-modulator-based flat comb generator and dispersion-flattened dispersion-decreasing fiber.

By combining a Mach-Zehnder-modulator-based flat comb generator (MZ-FCG) with a dispersion-flattened dispersion-decreasing fiber, femtosecond pulses have been generated from a cw light. Near-Fourier-transform-limit picosecond pulses generated from the MZ-FCG were compressed into femtosecond order by pulse compression. Our system enables flexible tuning of the repetition rate and pulse width, because those depend on the driving signal of the MZ-FCG. Pulse trains of 200 fs width were continuously and stably generated without mode hopping, with a repetition rate range from 5 to 17 GHz. Our system consists of a modulator and compression fiber; thus, the configuration is simpler and more stable.