Comparative Analysis of Impact Strength among Various Polymeric Materials for Orthotic Production.

Orthotic devices play an important role in medical treatment, addressing various pathologies and promoting patient recovery. Customization of orthoses to fit individual patient morphologies and needs is essential for optimal functionality and patient comfort. The advent of additive manufacturing has revolutionized the biomedical field, offering advantages such as cost reduction, increased personalization, and enhanced dimensional adaptability for orthotics manufacturing. This research focuses on the impact strength of nine polymeric materials printed by additive manufacturing, including an evaluation of the materials' performance under varying conditions comprising different printing directions (vertical and horizontal) and exposure to artificial sweat for different durations (0 days, 24 days, and 189 days). The results showed that Nylon 12 is good for short-term (24 days) immersion, with absorbed energies of 78 J and 64 J for the vertical and horizontal directions, whereas Polycarbonate (PC) is good for long-term immersion (189 days), with absorbed energies of 66 J and 78 J for the vertical and horizontal directions. Overall, the findings contribute to a better understanding of the suitability of these materials for biomedical applications, considering both short-term and long-term exposure to physiological and environmental conditions.

Mechanical Properties of Additively Manufactured Polymeric Materials-PLA and PETG-For Biomechanical Applications.

The study presented herein concerns the mechanical properties of two common polymers for potential biomedical applications, PLA and PETG, processed through fused filament fabrication (FFF)-Material Extrusion (ME). For the uniaxial tension tests carried out, two printing orientations-XY (Horizontal, H) and YZ (Vertical, V)-were considered according to the general principles for part positioning, coordinates, and orientation typically used in additive manufacturing (AM). In addition, six specimens were tested for each printing orientation and material, providing insights into mechanical properties such as Tensile Strength, Young's Modulus, and Ultimate Strain, suggesting the materials' potential for biomedical applications. The experimental results were then compared with correspondent mechanical properties obtained from the literature for other polymers like ASA, PC, PP, ULTEM 9085, Copolyester, and Nylon. Thereafter, fatigue resistance curves (S-N curves) for PLA and PETG, printed along 45°, were determined at room temperature for a load ratio, R, of 0.2. Scanning electron microscope observations revealed fibre arrangements, compression/adhesion between layers, and fracture zones, shedding light on the failure mechanisms involved in the fatigue crack propagation of such materials and giving design reference values for future applications. In addition, fractographic analyses of the fatigue fracture surfaces were carried out, as well as X-ray Computed Tomography (XCT) and Thermogravimetric (TGA)/Differential Scanning Calorimetric (DSC) tests.

Understanding Zenker's Diverticulum Treatment: Transoral CO2 Laser Microsurgery.

The authors present a case of a 36-year-old woman with a recurrent throat foreign body sensation and persistent dysphagia. On physical examination, a polypoid mass was visible at the postcricoid region, mobile with swallowing. A barium swallowing test confirmed the diagnosis of Zenker's diverticulum. The patient underwent transoral CO2 laser microsurgery for excision of the pharyngeal pouch. At the four-month evaluation, the patient was remarkably asymptomatic and without evidence of recurrence. This clinical case illustrates in detail the endoscopic view of the pre and postoperative aspects of the pharyngeal pouch, showing a step-by-step transoral CO2 laser microsurgery technique, with video.

Synergy between 3D-extruded electroconductive scaffolds and electrical stimulation to improve bone tissue engineering strategies.

In this work, we propose a simple, reliable, and versatile strategy to create 3D electroconductive scaffolds suitable for bone tissue engineering (TE) applications with electrical stimulation (ES). The proposed scaffolds are made of 3D-extruded poly(ε-caprolactone) (PCL), subjected to alkaline treatment, and of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), anchored to PCL with one of two different crosslinkers: (3-glycidyloxypropyl)trimethoxysilane (GOPS) and divinyl sulfone (DVS). Both cross-linkers allowed the formation of a homogenous and continuous coating of PEDOT:PSS to PCL. We show that these PEDOT:PSS coatings are electroconductive (11.3-20.1 S cm-1), stable (up to 21 days in saline solution), and allow the immobilization of gelatin (Gel) to further improve bioactivity. In vitro mineralization of the corresponding 3D conductive scaffolds was greatly enhanced (GOPS(NaOH)-Gel - 3.1 fold, DVS(NaOH)-Gel - 2.0 fold) and cell colonization and proliferation were the highest for the DVS(NaOH)-Gel scaffold. In silico modelling of ES application in DVS(NaOH)-Gel scaffolds indicates that the electrical field distribution is homogeneous, which reduces the probability of formation of faradaic products. Osteogenic differentiation of human bone marrow derived mesenchymal stem/stromal cells (hBM-MSCs) was performed under ES. Importantly, our results clearly demonstrated a synergistic effect of scaffold electroconductivity and ES on the enhancement of MSC osteogenic differentiation, particularly on cell-secreted calcium deposition and the upregulation of osteogenic gene markers such as COL I, OC and CACNA1C. These scaffolds hold promise for future clinical applications, including manufacturing of personalized bone TE grafts for transplantation with enhanced maturation/functionality or bioelectronic devices.

Rigid Esophagoscopy for Foreign Body Extraction: Results and Complications in the Endoscopic Era.

Introduction Rigid esophagoscopy (RE) has long been a part of otolaryngology practice. In the past decades, the procedure was less commonly performed due to the advances and availability of flexible endoscopic techniques. This study aims to describe the outcomes of RE performed to treat foreign body ingestion and to evaluate risk factors associated with postoperative complications. Methods Patients who underwent RE to treat foreign body ingestion in an otolaryngology emergency department of a Portuguese tertiary university hospital, between 2010 and 2020, were included. A total of 162 cases were analyzed, and data was collected retrospectively. Results The most common foreign bodies were meat bone (31.5%, n = 47), food impaction (28.8%, n = 43), and fish bone (19.5%, n = 29). The proximal esophagus was by far the most frequent location (80%, n = 118). Esophageal perforation occurred in 8% (13 patients), and there was a 2.5% (n = 4) mortality rate. The odds ratio of an esophageal perforation if the foreign body was completely or partially located outside the proximal esophagus was 4.67 times that of a foreign body exclusively in the proximal esophagus (OR = 4.67 [95% CI: 1.39-15.72]; p = 0.016; Fisher's exact test). Conclusion RE remains an effective and important technique in the management of ingested foreign bodies, particularly if endoscopic removal is unsuccessful. Foreign body location outside the proximal esophagus was associated with esophageal perforation.

Vertical dorsal rhinotomy in pediatric nasal dermoid surgery.

INTRODUCTION AND OBJECTIVES: Nasal dermoids are uncommon midline congenital lesions in the nose, usually diagnosed in the first years of life. Imaging is mandatory to evaluate local and intracranial extension and treatment consists in surgical excision. This study aims to review the experience of the department in managing pediatric nasal dermoids using a dorsal rhinotomy surgical approach. MATERIAL AND METHODS: Retrospective case series of pediatric nasal dermoids treated at a tertiary university teaching hospital over a period of seven years. RESULTS: Nine children were treated during this period. Clinical presentation was a dermoid sinus-cyst in seven cases and a cystic lesion in two. Pre-operative imaging revealed extension of the lesion to the foramen cecum in three cases. Surgery was performed via vertical dorsal rhinotomy in all patients, and associated endoscopic surgery was used in three patients. Reconstruction with autologous material was performed in three cases. No complications or recurrences were registered during the follow-up. CONCLUSIONS: In the presented series, a vertical dorsal rhinotomy incision has provided good functional and aesthetic results. The possibility of nasal dermoid intracranial extension should be accessed with imaging but remains uncommon. In its absence, this approach may be useful and can be paired with other techniques, such as nasal endoscopy, to achieve the best outcomes.

Comparison of Clinical and Pathological Staging in Patients with Head and Neck Cancer After Neck Dissection.

Introduction Clinical and pathological staging plays an important role on the prognosis of head and neck cancer (HNC) patients. Objective The present study aims to compare clinical and pathological T, N and overall staging in patients with HNC, to identify factors associated with these discrepancies, and to analyze and compare survival or disease-free survival in staging disagreements. Methods Retrospective cohort including every patient submitted to neck dissection from January 2010 to December 2020 in the department of Otorhinolaryngology of a tertiary hospital center. Results A total of 79 patients were analyzed; their mean age was 58.52 ± 13.15 years old and 88.9% were male. Assessing overall staging, discrepancies were noted in 53% (36.4% upstaging and 16.6% downstaging) and were significantly associated with clinical overall staging ( p = 0.006). Regarding T staging, differences were noted in 45.5% (30.3% upstaging and 15.2% downstaging) and were significantly associated with imaging modality ( p = 0.016), clinical T staging ( p = 0.049), and histology ( p = 0.017). Discrepancies in N staging were noted in 38% (25.3% upstaging and 12.7% downstaging) and were significantly associated with age ( p = 0.013), clinical N staging ( p < 0.001), and presence of extranodal invasion ( p < 0.001). Both in Overall, T, and N staging, the aforementioned disagreements were not associated with either higher mortality or higher disease relapse. Conclusion Overall, T, and N staging disagree in an important number of cases, and the overall stage can disagree in up to 53% of the cases. These disagreements do not seem to influence overall and disease-free survival.

Gold Nanoparticle-Loaded Silica Nanospheres for Sensitive and Selective Electrochemical Detection of Bisphenol A.

In this work, silica nanospheres were used as support for gold nanoparticles and applied for bisphenol A electrochemical detection. The development of new silica-supported materials has attracted increasing attention in the scientific world. One approach of interest is using silica nanospheres as support for gold nanoparticles. These materials have a variety of applications in several areas, such as electrochemical sensors. The obtained materials were characterized by solid-state UV-vis spectroscopy, electron microscopy, X-ray diffraction, and electrochemical techniques. The electrode modified with AuSiO2700/CHI/Pt was applied as an electrochemical sensor for BPA, presenting an oxidation potential of 0.842 V and a higher peak current among the tested materials. The AuSiO2700/CHI/Pt electrode showed a logarithmic response for the detection of BPA in the range of 1-1000 nmol L-1, with a calculated detection limit of 7.75 nmol L-1 and a quantification limit of 25.8 nmol L-1. Thus, the electrode AuSiO2700/CHI/Pt was presented as a promising alternative to an electrochemical sensor in the detection of BPA.

Severe KIDAR syndrome caused by deletion in the AP1B1 gene: Report of a teenage patient and systematic review of the literature.

Autosomal recessive keratitis-ichthyosis-deafness syndrome (KIDAR MIM #242150) is a very rare disorder caused by pathogenic loss-of-function variants in the AP1B1 gene. So far, nine patients have been reported in the literature and more clinical descriptions are essential to further delineate the phenotype of KIDAR. Here we report a new patient with KIDAR and compare the clinical findings with those from the other published cases with molecular confirmation. We describe a 14-year-old male born to non-consanguineous parents with unremarkable family history. The patient had fetal ascites, neonatal pancreatic insufficiency with consequent failure to thrive, feeding difficulties, recurrent infections and sepsis. The skin examination was remarkable for an ichthyosis with conspicuous palmoplantar keratoderma, sparse and brittle hair with alopecia on the vertex and slight bilateral ectropion. He had short stature, thin build, frontal bossing, small teeth and prominent abdomen. Additional features were congenital profound bilateral sensorineural deafness, photosensitivity and photophobia. Mild global developmental delay was noted. Persistent mild anemia, neutropenia, thrombocytopenia, and low serum copper, ceruloplasmin and growth hormone were also present. Brain magnetic resonance imaging (MRI) showed cerebral atrophy and thin corpus callosum. Genetic testing revealed a homozygous deletion in the AP1B1 gene, possibly including the same exons as a previously reported deletion. Comparing the phenotypes of all reported individuals, they are highly concordant and major features are enteropathy with feeding difficulties, failure to thrive, ichthyosis, palmoplantar keratoderma, sensorineural deafness and sparse and brittle hair. Here we report other features present in more than one patient that could be part of the phenotypic spectrum and suggest copy number variation analysis to be performed alongside sequencing of the AP1B1 gene in case of suspicion.

Orofacial clefts: Reflections on prenatal diagnosis and family history based on a series of cases of a tertiary children hospital.

Prenatal diagnosis of orofacial clefts allows adequate counseling and planning for prenatal care and delivery. In 2001, two-dimensional ultrasound screening became universally used in Portugal by government guidelines, and after 2007 more advanced ultrasound became available. This study aimed to describe the prevalence of family history in patients with orofacial clefts and analyze prenatal diagnosis in patients born before 2001, between 2001 and 2007 and after 2007. Retrospective analysis of a cohort of patients with orofacial clefts followed by the trans-disciplinary team of a tertiary hospital. A total of 672 OFCs were identified: 40.9% isolated cleft palate, 38.1% cleft lip and palate, 19.7% cleft lip and 1.3% atypical cleft; 57.1% were male. The prevalence of family history was 26.0% of which 30.9% had a recognizable syndrome. Of those born before 2001, 13.7% had prenatal diagnosis; of those born between 2001 and 2007, 32.6% orofacial clefts were diagnosed in utero; and in children born after 2007, prenatal diagnosis increased to 47.1%. In our study, about one-fourth of children had a positive family history. Since the implementation of universal ultrasound screening in Portugal, more orofacial clefts were identified in utero (42.5% vs. 13.7%; p < 0.05) and after the availability of advanced ultrasound, prenatal diagnosis increased to 47.1% (vs. 20.4% before 2007; p < 0.05). Of all orofacial clefts diagnosed prenatally, ultrasound revealed more accuracy for the diagnosis of cleft lip and palate (65.4%) and cleft lip (24.8%). Cleft palate is the most difficult to detect in utero (9.3%). Prenatal ultrasound screening in Portugal has technically evolved with consequent better diagnostic accuracy for the identification of orofacial clefts, allowing better parenteral counseling.

Is Computed Tomography Necessary Before Septoplasty? Correlation With Physical Examination and Patient Complaints.

INTRODUCTION: Septoplasty is one of the most common surgeries performed by otorhinolaryngologists. The gold standard for the evaluation of septal deviation is anterior rhinoscopy and nasal endoscopy. Frequently, computed tomography (CT) is also performed, although the correlation between septal deviation on CT and physical examination is unclear. OBJECTIVES: To study the relationship between symptoms and physical and radiological evaluation in patients who underwent septoplasty. METHODS: A prospective study of patients with nasal obstruction and septal deviation who underwent septoplasty. Anterior rhinoscopy and nasal endoscopy were performed by the surgeon, and the CT was evaluated by a radiologist. The degree of obstruction was evaluated in three distinct septal locations. The Nasal Obstruction Symptom Evaluation (NOSE) score was used before the surgery and two months after the surgery. RESULTS: The study included 43 patients, of whom 60.5% were male, with an average age of 37.09 years (±12.56). The degree of septal deviation in the physical examination was significantly different from that observed in CT (p˂0.05). Cartilaginous or maxillary crest septal deviations >75% were more commonly recognized by physical examination, while osseous septum deviations of 25%-50% were more easily detected by CT. There was no difference between the degree of septal deviation and the preoperative NOSE. The median preoperative NOSE was 60, and the postoperative was 5, with significant improvement (p<0.05). CONCLUSION: CT doesn't appear to be useful in the evaluation of septal deviation since it is different from the findings of a physical examination and isn't associated with the NOSE score. Clinical decisions should be based on a physical examination and patient complaints.

A Novel Approach for Design and Manufacturing of Curvature-Featuring Scaffolds for Osteochondral Repair.

Osteochondral (OC) defects affect both articular cartilage and the underlying subchondral bone. Due to limitations in the cartilage tissue's self-healing capabilities, OC defects exhibit a degenerative progression to which current therapies have not yet found a suitable long-term solution. Tissue engineering (TE) strategies aim to fabricate tissue substitutes that recreate natural tissue features to offer better alternatives to the existing inefficient treatments. Scaffold design is a key element in providing appropriate structures for tissue growth and maturation. This study presents a novel method for designing scaffolds with a mathematically defined curvature, based on the geometry of a sphere, to obtain TE constructs mimicking native OC tissue shape. The lower the designed radius, the more curved the scaffold obtained. The printability of the scaffolds using fused filament fabrication (FFF) was evaluated. For the case-study scaffold size (20.1 mm × 20.1 mm projected dimensions), a limit sphere radius of 17.064 mm was determined to ensure printability feasibility, as confirmed by scanning electron microscopy (SEM) and micro-computed tomography (µ-CT) analysis. The FFF method proved suitable to reproduce the curved designs, showing good shape fidelity and replicating the expected variation in porosity. Additionally, the mechanical behavior was evaluated experimentally and by numerical modelling. Experimentally, curved scaffolds showed strength comparable to conventional orthogonal scaffolds, and finite element analysis was used to identify the scaffold regions more susceptible to higher loads.

Cancer Models on Chip: Paving the Way to Large-Scale Trial Applications.

Cancer kills millions of individuals every year all over the world (Global Cancer Observatory). The physiological and biomechanical processes underlying the tumor are still poorly understood, hindering researchers from creating new, effective therapies. Inconsistent results of preclinical research, in vivo testing, and clinical trials decrease drug approval rates. 3D tumor-on-a-chip (ToC) models integrate biomaterials, tissue engineering, fabrication of microarchitectures, and sensory and actuation systems in a single device, enabling reliable studies in fundamental oncology and pharmacology. This review includes a critical discussion about their ability to reproduce the tumor microenvironment (TME), the advantages and drawbacks of existing tumor models and architectures, major components and fabrication techniques. The focus is on current materials and micro/nanofabrication techniques used to manufacture reliable and reproducible microfluidic ToC models for large-scale trial applications.

Films composed of white angico gum and chitosan containing chlorhexidine as an antimicrobial agent.

Anadenanthera colubrina, popularly known as white angico, is a species extensively cultivated in Brazil, mainly in the cerrado region, including the state of Piauí. This study examines the development of films composed of white angico gum (WAG) and chitosan (CHI) and containing chlorhexidine (CHX), an antimicrobial agent. The solvent casting method was used to prepare films. Different combinations and concentrations of WAG and CHI were used to obtain films with good physicochemical characteristics. Properties such as the in vitro swelling ratio, the disintegration time, folding endurance, and the drug content were determined. The selected formulations were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the CHX release time and antimicrobial activity were evaluated. CHX showed a homogenous distribution in all CHI/WAG film formulations. The optimised films showed good physicochemical properties with 80% CHX release over 26 h, which is considered promising for local treatment of severe lesions in the mouth. Cytotoxicity tests of the films did not show toxicity. The antimicrobial and antifungal effects were very effective against the tested microorganisms.

Cellulose-Based Scaffolds: A Comparative Study for Potential Application in Articular Cartilage.

Osteoarthritis is a highly prevalent disease worldwide that leads to cartilage loss. Tissue engineering, involving scaffolds, cells, and stimuli, has shown to be a promising strategy for its repair. Thus, this study aims to manufacture and characterise different scaffolds with poly(ε-caprolactone) (PCL) with commercial cellulose (microcrystalline (McC) and methyl cellulose (MC) or cellulose from agro-industrial residues (corncob (CcC)) and at different percentages, 1%, 2%, and 3%. PCL scaffolds were used as a control. Morphologically, the produced scaffolds presented porosities within the desired for cell incorporation (57% to 65%). When submitted to mechanical tests, the incorporation of cellulose affects the compression resistance of the majority of scaffolds. Regarding tensile strength, McC2% showed the highest values. It was proven that all manufactured scaffolds suffered degradation after 7 days of testing because of enzymatic reactions. This degradation may be due to the dissolution of PCL in the organic solvent. Biological tests revealed that PCL, CcC1%, and McC3% are the best materials to combine with human dental pulp stem/stromal cells. Overall, results suggest that cellulose incorporation in PCL scaffolds promotes cellular adhesion/proliferation. Methyl cellulose scaffolds demonstrated some advantageous compressive properties (closer to native cartilaginous tissue) to proceed to further studies for application in cartilage repair.

Facial nerve dysfunction following parotidectomy: role of intraoperative facial nerve monitoring.

PURPOSE: Facial nerve dysfunction (FND) is a frequent and serious parotidectomy outcome. Intraoperative facial nerve monitoring (IFNM) is an increasingly used technique to identify the facial nerve (FN) and minimize its injury. This study aimed to evaluate the determinant factors in the presence and severity of FND after parotidectomy, including IFNM. STUDY DESIGN, SETTING AND METHODS: A total of 48 patients consecutively submitted to parotidectomy between 2005 and 2020 in a tertiary hospital were retrospectively analyzed. The House-Brackmann Scale (HBS) was used to assess the severity of FND. RESULTS: There was a mean age of 54.2 ± 17.8 years, 50% were male. Pleomorphic adenoma (41.7%) and Warthin's tumor (25.0%) were most common. From the 23 patients (47.9%) who developed some degree of FND (HBS score of 3.41 ± 1.53), 19 (82.6%) showed facial movement recovery, with a mean recovery time of 4.78 ± 2.53 months. IFNM was performed in 39.6% of the surgeries. The use of IFNM (p = 0.514), the type of surgery-partial or total parotidectomy-(p = 0.853) and the type of histology-benign or malignant lesion-(p = 0.852) did not significantly influence the presence of FND in the postoperative period. However, in the subgroup of patients who developed FND, the HBS value was significantly lower in cases of benign pathology (p = 0.002) and in patients who underwent IFNM (p = 0.017), denoting a significantly lower severity. CONCLUSION: In the present study, IFNM and the existence of a benign lesion have been shown to be associated with lower severity of FND.

Comparison of Clinical and Pathological Staging in Patients with Head and Neck Cancer After Neck Dissection

Abstract Introduction Clinical and pathological staging plays an important role on the prognosis of head and neck cancer (HNC) patients. Objective The present study aims to compare clinical and pathological T, N and overall staging in patients with HNC, to identify factors associated with these discrepancies, and to analyze and compare survival or disease-free survival in staging disagreements. Methods Retrospective cohort including every patient submitted to neck dissection from January 2010 to December 2020 in the department of Otorhinolaryngology of a tertiary hospital center. Results A total of 79 patients were analyzed; their mean age was 58.52 ± 13.15 years old and 88.9% were male. Assessing overall staging, discrepancies were noted in 53% (36.4% upstaging and 16.6% downstaging) and were significantly associated with clinical overall staging (p = 0.006). Regarding T staging, differences were noted in 45.5% (30.3% upstaging and 15.2% downstaging) and were significantly associated with imaging modality (p = 0.016), clinical T staging (p = 0.049), and histology (p = 0.017). Discrepancies in N staging were noted in 38% (25.3% upstaging and 12.7% downstaging) and were significantly associated with age (p = 0.013), clinical N staging (p < 0.001), and presence of extranodal invasion (p < 0.001). Both in Overall, T, and N staging, the aforementioned disagreements were not associated with either higher mortality or higher disease relapse. Conclusion Overall, T, and N staging disagree in an important number of cases, and the overall stage can disagree in up to 53% of the cases. These disagreements do not seem to influence overall and disease-free survival.

Gender differences in psychiatric comorbidity and personality characteristics among adults seeking treatment for problematic internet use.

In the present study, we investigated gender differences in personality and psychiatric correlates among adults (N = 115) seeking treatment for problematic internet use (PIU) at a specialized clinic in São Paulo, Brazil. All participants were assessed at the beginning of their treatment for co-occurring psychiatric conditions, other addictive behaviors, and personality characteristics. Women (n = 20) were more likely to present with greater rates of psychiatric comorbidity compared to men (n = 95), including mood disorders, anxiety disorders, obsessive-compulsive disorder, post-traumatic stress disorder, and bulimia nervosa. Women also had a greater severity of certain behavioral addictions, such as compulsive buying and disordered eating. Gender differences were also found across personality characteristics, with women scoring higher on impulsivity, novelty seeking, and self-transcendence compared to men. To our knowledge, the present study is the first to investigate gender differences for PIU in a clinical sample. The results suggest that there are notable gender differences in individuals seeking treatment for PIU which underscores the importance of assessing for co-occurring conditions, especially in women. Understanding the characteristics associated with PIU can help serve to inform the most appropriate interventions to bolster treatment outcomes.

Prognostic Role of the Initial Grade of Dysplasia on Premalignant Vocal Fold Lesions.

PURPOSE: The main objective of this study was to analyze the prognostic role of the initial grade of dysplasia on the progression to SCC. STUDY DESIGN: Retrospective cohort. METHODS: This study was performed in the Otorhinolaryngology Department of a tertiary hospital center from January 2010 to December 2020. Every patient submitted to a microlaryngoscopy during this period with a histology of dysplasia on the first biopsy was included. RESULTS: A total of 112 patients were included and median follow-up was 24 months (range 1-120 months). Mean age at diagnosis was 59.71 (+/- 12.03) and 88 patients were male (78.6%). Initial grade of dysplasia was mild on 60 patients (53.6%), moderate on 24 (21.4%), severe on 18 (16.1%), and carcinoma in situ in 10 (8.9%). Overall, 25 patients (21.4%) developed invasive squamous cell carcinoma (SCC) and 15 (13.4%) died during follow-up. On an adjusted 5 year's progression free survival analysis, considering gender, age, dysplasia grade, tobacco and alcohol consumption, the initial grade of dysplasia was the only factor significantly associated with progression to carcinoma (P = .047). When compared to mild dysplasia, moderate dysplasia had a Hazard Ratio (HR) of 0.81 (95%CI 0.21-3.22); severe dysplasia had a HR of 1.76 (95%CI 0.59-5.30) and carcinoma in situ had a HR of 4.25 (95%CI 1.44-12.59). CONCLUSION: The initial dysplasia grade seems to be the most important prognostic factor regarding progression to SCC in patients with premalignant vocal fold disease.