Synthesis and Evaluation of High Functionality and Quality Cell-penetrating Peptide Conjugated Lipid for Octaarginine Modified PEGylated Liposomes In U251 and U87 Glioma Cells.

The use of peptide ligand modified PEGylated liposomes has been widely investigated for tumor targeting. Peptides are mainly inserted in the liposomal lipid bilayer using PEG2K-lipid spacer (Peptide-PEG2K-DSPE). However, a lower cellular uptake from longer nonlinear PEG2K spacer was reported, we here synthesized a high functionality and quality (HFQ) lipid with a short, linear serine-glycine repeated peptide [(SG)5] spacer. The objective of the current study is to develop novel octaarginine (R8) peptide-HFQ lipid grafted PEGylated liposomes for glioma cells targeting. In vitro liposomes characterization showed that the mean particle size of all liposomal formulations was in the nano-scale range < 120 nm, with a small PDI value (i.e. ∼0.2) and had a spherical shape under Transmission Electron Microscope, indicating a homogenous particle size distribution. The flow cytometry in vitro cellular association data with U251 MG and U87 cells revealed that 1.5% R8-(SG)5-lipid-PEGylated liposomes exhibited significantly higher cellular association of ∼15.87 and 7.59-fold than the conventional R8-PEG2K-lipid-PEGylated liposomes (10.4 and 6.19-fold), respectively, relative to the unmodified PEGylated liposomes. Moreover, intracellular distribution studies using confocal laser scanning microscopy (CLSM) corroborated the results of the in vitro cell association. The use of ligand-HFQ-lipid liposomes could be a potential alternative to ligand-PEG2K-lipid-modified liposomes as a drug delivery system for tumor targeting.

Chitosan caged liposomes for improving oral bioavailability of rivaroxaban: in vitro and in vivo evaluation.

In this study, chitosan (CS) caged classic liposomes (CLs) and flexible liposomes (FLs) were developed to enhance the oral bioavailability of rivaroxaban (RVX) in the fasted condition. The prepared formulations were subjected to physicochemical characterization included: FTIR, DSC, zeta potential, particle size, polydispersity index, entrapment efficiency, in vitro dissolution, and transmission electron microscope imaging. The selected formulation (RVX-TFL2) composed of PL S100/Tween 80 (85/15% w/w) and coated with CS solution in the strength of (0.2% w/v) had a particle size of 105.67 nm, a zeta potential of +5.67 mV and EE of 96.07%. Compared to RXV suspension, the pharmacokinetic parameters (C max, AUC0-24, and AUC0-∞) of RVX-TFL2 showed no statistically significant difference (P > 0.05) in the fasted and fed test animals. Besides, RVX bioavailability with RVX-TFL2 was improved by 59.66% and 26.97% in the fed and fasted states, respectively, compared to RVX suspension in the fed state. The result highlighted the efficacy of the prepared liquid formulation comprising CS coated liposomes in improving the oral bioavailability of RVX regardless of the fed state. Moreover, the studied liquid formulation could be utilized in developing a liquid dosage form that might be useful as a pediatric formulation of RVX.

Development and validation of an HPLC-UV method for the quantification of carbamazepine in rabbit plasma.

An isocratic simple rapid assay has been developed and validated for the determination of carbamazepine (CBZ) in both solution form and rabbit plasma using propylparaben as an internal standard. The assay was performed using a µ-Bondapak C18 (150 mm × 4.6 mm i.d) with a mobile phase consisting of methanol and water (50:50), the flow rate was 1 ml/min and UV detection at 285 nm. The method was found to be specific for CBZ, no interfering peaks were observed with an overall analytical run time of 15 min. Accuracy reported as % recovery were found to be 98.37-100.45% and 97.53-103.58% for inter-day and intra-day accuracies, respectively. Inter-day precision (reproducibility) was found to be 0.53-2.75% RSD, while intra-day precision (repeatability) was found to be 1.06-3.7% RSD for the samples studied. The calibration curve was found to be linear with the equation y = 0.2847x + 0.0138, with a correlation coefficient of 0.9999 (R (2)) over a concentration range of 0.5-40 µg/ml. The limit of quantitation was the lowest concentration. The method is simple and rapid and does not require any preliminary treatment of the sample. The method was fully validated.

Optimization of 5-flurouracil solid-lipid nanoparticles: a preliminary study to treat colon cancer.

Solid lipid nanoparticle (SLNs) formulae were utilized for the release of 5-flurouracil (5-FU) inside the colonic medium for local treatment of colon cancer. SLNs were prepared by double emulsion-solvent evaporation technique (w/o/w) using triglyceride esters, Dynasan™ 114 or Dynasan™ 118 along with soyalecithin as the lipid parts. Different formulation parameters; including type of Dynasan, soyalicithin:Dynasan ratio, drug:total lipid ratio, and polyvinyl alcohol (PVA) concentration were studied with respect to particle size and drug entrapment efficiency. Results showed that formula 8 (F8) with composition of 20% 5-FU, 27% Dynasan™ 114, and 53% soyalithicin andformula 14 (20% 5-FU, 27% Dynasan™ 118, and 53% soyalithicin), which were stabilized by 0.5% PVA, as well as F10 with similar composition as F8 but stabilized by 2% PVA were considered the optimum formulae as they combined small particle size and relatively high encapsulation efficiencies. F8 had a particle size of 402.5 nm ± 34.5 with a polydispersity value of 0.005 and an encapsulation efficiency of 51%, F10 had a 617.3 ± 54.3 nm particle size with 0.005 polydispersity value and 49.1% encapsulation efficiency, whereas formula F14 showed a particle size of 343 nm ± 29 with 0.005 polydispersity, and an encapsulation efficiency of 59.09%. DSC and FTIR results suggested the existence of the lipids in the solid crystalline state. Incomplete biphasic prolonged release profile of the drug from both formulae was observed in phosphate buffer pH 6.8 as well as simulated colonic medium containing rat caecal contents. A burst release with magnitudes of 26% and 28.8% cumulative drug released were noticed in the first hour samples incubated in phosphate buffer pH 6.8 for both F8 and F14, respectively, followed by a slow release profile reaching 50% and 52% after 48 hours.

Comparative study of itraconazole-cyclodextrin inclusion complex and its commercial product.

Itraconazole (ITZ) solid complex using hydroxypropyl-beta-cyclodextrin (ITZ-HP-beta-CD) with 20% polyvinylpyrrolidone was prepared by a co-evaporation method. The complex improved antifungal activity against C. parapasilosis and C. albicans. The complex demonstrated good flow and compressibility characteristics. The complex was formulated as a capsule dosage form and drug release was evaluated. Capsules containing ITZ-HP-beta-CD at a molar ratio of 1:3 with 20% polyvinylpyrrolidone have a faster dissolution rate than commercial capsules (Sporanox). About 88% of ITZ was released in less than 30 min and the initial dissolution rate exhibited a 3.5-fold increase compared to the commercial product. UV spectrophotometeric, HPLC, and antimicrobial methods were used to determine ITZ concentration in the release medium and the results obtained by these methods are reported. It was found that HPLC analysis is a suitable and reliable method for determination of the drug concentration with a coefficient of variation less than 10%. The intraday precision showed a coefficient of variation less than 3.96%, and that for interday was less than 4.99%. The HPLC method was more accurate and precise than the antimicrobial and UV-spectrophotometric methods for determination of ITZ concentration present in the release medium.

Validated high-performance liquid chromatographic technique for determination of 5-fluorouracil: applications to stability studies and simulated colonic media.

A simple isocratic stability-indicating high-performance liquid chromatographic method with UV detection using thymine as an internal standard is developed. The method is validated and the degradation products are determined. The method is applied for the assessment of the stability of 5-fluorouracil in rat caecal content as a simulated colon medium under anaerobic conditions. The drug decomposes under acidic, alkaline, thermal, and oxidative stress. The drug is highly susceptible to acidic, alkaline, and oxidative hydrolysis as compared to alkaline conditions. Separation of the drug from major and minor degradation products is successfully achieved on a C(18) analytical, micro-bondapak column. The detection wavelength is 260 nm. The method is validated, and the response is found to be linear in the drug concentration range of 0.1-2.0 microg/mL. The high linearity of the standard calibration curve of 5-fluorouracil in the rat content is found to be R(2) = 0.998 in the concentration range from 0.5 to 5 microg/mL. No degradation occurred after incubation of 5-fluorouracil in the rat caecal contents. The standard deviation and coefficient of variation values for intra- and inter-day precision study exhibit acceptable accuracy and precision data throughout the concentration range investigated.