RESUMO
The reference interferometer scheme is an effective noise reduction method, but the optical path length difference (OPD) of the two interferometers must be strictly equal, which limits its application in practical environments. In this paper, an improved reference interferometer demodulation technique without strictly equal OPDs is proposed to suppress phase noise. By introducing a reference interferometer, the phase noise can be removed from the demodulation results. The combination of the differential self-multiplication algorithm and the fitted phase modulation depth calculation formula can evaluate the phase modulation depth of both interferometers in real time and simultaneously eliminate the nonlinear distortion caused by phase modulation depth drift and the effect of different OPDs on the reference interferometer scheme. The experimental results show that the technique can obtain highly stable and accurate demodulation results even if the OPDs of the two reference interferometers are different. The phase modulation depth calculation error is less than 0.57%, the maximum phase noise reduction is 15â dB, the average reduction is 9â dB, the minimum total harmonic distortion is 0.17%, and the SINAD reaches 35.90â dB.
RESUMO
An improved ellipse-fitting algorithm phase demodulation (EFAPD) technique is proposed to reduce the influence of light source intensity noise on a system. In the original EFAPD, the sum of the intensities of coherent light (ICLS) is an important part of the interference signal noise, which makes the demodulation results suffer. The improved EFAPD corrects the ICLS and fringe contrast quantity of the interference signal by an ellipse-fitting algorithm, and then calculates the ICLS based on the structure of pull-cone 3 × 3 coupler, so as to remove it in the algorithm. Experimental results show that the noise of the improved EFAPD system is significantly reduced compared with that of the original EFAPD, with a maximum reduction of 35.57â dB. The improved EFAPD makes up for the deficiency of the original EFAPD in suppressing light source intensity noise, and promotes the application and popularization of EFAPD.
RESUMO
For the optical fiber sensing system using phase generated carrier (PGC) technology, it is very important to eliminate the nonlinear effect of phase modulation depth (C) fluctuation on the demodulation results in the actual environment. In this paper, an ameliorated phase generated carrier demodulation technique is presented to calculate the C value and suppress its nonlinear influence on the demodulation results. The value of C is calculated out by the fundamental and third harmonic components with the equation fitted by the orthogonal distance regression algorithm. Then the Bessel recursive formula is used to convert the coefficients of each order of Bessel function contained in demodulation result into C values. Finally, the coefficients in demodulation result are removed by the calculated C values. In the experiment, when the C ranges from 1.0â rad to 3.5â rad, the minimum total harmonic distortion and maximum phase amplitude fluctuation of the ameliorated algorithm are 0.09% and 3.58%, which are far superior to the demodulation results of the traditional arctangent algorithm. The experimental results demonstrate that the proposed method can effectively eliminate the error caused by the fluctuation of the C value, which provides a reference for signal processing in practical applications of fiber-optic interferometric sensors.
RESUMO
A highly sensitive temperature and strain sensor based on an antiresonant hollow core fiber (ARHCF) probe with the Vernier effect is proposed and experimentally demonstrated. The ARHCF probe is used as a reference interferometer by sandwiching an ARHCF, which is insensitive to temperature, strain, and refractive index, between a single-mode fiber (SMF) and a polarization-maintaining fiber (PMF). The polarization mode interferometer (PMI), fabricated by splicing a section of PMF with a fiber polarizer at a 45-degree angle, works as a sensing interferometer. The Vernier effect is introduced by connecting the reference interferometer and the PMI in parallel. The experimental results show that by introducing the Vernier effect, the temperature sensitivity is improved from -1.68 to -15.7nm/∘C and the strain sensitivity is improved from 5.09 to 47.65 pm/µÎµ. The magnification is consistent with the theoretical results. The reference segment of the proposed sensor is not affected by ambient factors, which provides a new strategy and idea for the development of multiparameter sensors based on the Vernier effect.
RESUMO
In the reference interferometer demodulation scheme, it's difficult to guarantee in practice that both interferometers have the same optical path length difference (OPD), which makes the phase modulation depth different in different interferometers with the same laser modulation. The random shift of phase modulation depth also affects the demodulation results. An improved phase-generated carrier (PGC) technique is proposed based on an auxiliary reference interferometer and the ellipse fitting algorithm (EFA). The technique ensures the correct fitting of the EFA for small amplitude signals by introducing a sinusoidal signal as an additional phase modulation. The combination of the reference interferometer and EFA can eliminate the effect of different phase modulation depths of the two interferometers caused by different OPDs, the non-linear distortion caused by phase modulation depth shifts, and improve the accuracy of the demodulation results. The experiment results are consistent with the theoretical analysis, and the method extends the application of the EFA in the reference interferometer phase demodulation technique.