Identification and characterization of a moonlighting protein-enolase for surface display in Streptococcus thermophilus.

BACKGROUND: Streptococcus thermophilus is an important food starter and receiving more attention to serve as cell factories for production of high-valued metabolites. However, the low yields of intracellular or extracellular expression of biotechnological and biomedical proteins limit its practical applications. RESULTS: Here, an enolase EnoM was identified from S. thermophilus CGMCC7.179 with about 94% identities to the surface-located enolases from other Streptococcus spp. strains. The EnoM was used as an anchor to achieve surface display in S. thermophilus using GFP as a reporter. After respectively mixing the GFP-EnoM fusion protein or GFP with S. thermophilus cells in vitro, the relative fluorescence units (RFU) of the S. thermophilus cells with GFP-EnoM was 80-folds higher than that with purified GFP. The sharp decrease in the RFU of sodium dodecyl sulfate (SDS) pretreated cells compared to those of non-pretreated cells demonstrated that the membrane proteins were the binding ligand of EnoM. Furthermore, an engineered ß-galactosidase (ß-Gal) was also successfully displayed on the cell surface of S. thermophilus CGMCC7.179 and the relative activity of the immobilized ß-Gal remained up to 64% after reused 8 times. Finally, we also demonstrated that EnoM could be used as an anchor for surface display in L. casei, L. bulgaricus, L. lactis and Leuconostoc lactis. CONCLUSION: To our knowledge, EnoM from S. thermophilus was firstly identified as an anchor and successfully achieved surface display in LAB. The EnoM-based surface display system provided a novel strategy for the enzyme immobilization.

Targeted and Repetitive Chromosomal Integration Enables High-Level Heterologous Gene Expression in Lactobacillus casei.

Lactobacillus casei is a potential cell factory for the production of enzymes and bioactive molecules using episomal plasmids, which suffer from genetic instability. While chromosomal integration strategies can provide genetic stability of recombinant proteins, low expression yields limit their application. To address this problem, we developed a two-step integration strategy in Lb. casei by combination of the LCABL_13040-50-60 recombineering system (comprised of LCABL_1340, LCABL_13050, and LCABL_13060) with the Cre/loxP site-specific recombination system, with an efficiency of ∼3.7 × 103 CFU/µg DNA. A gfp gene was successfully integrated into six selected chromosomal sites, and the relative fluorescence intensities (RFUs) of the resulting integrants varied up to ∼3.7-fold depending on the integrated site, among which the LCABL_07270 site gfp integration showed the highest RFU. However, integrants with gfp gene(s) integrated into the LCABL_07270 site showed various RFUs, ranging from 993 ± 89 to 7,289 ± 564 and corresponding to 1 to 13.68 ± 1.08 copies of gfp gene integration. Moreover, the integrant with 13.68 ± 1.08 copies of the gfp gene had a more stable RFU after 63 generations compared to that of a plasmid-engineered strain. To investigate the feasibility of this system for bioactive molecules with high expression levels, the fimbrial adhesin gene, faeG, from Escherichia coli was tested and successfully integrated into the LCABL_07270 site with 5.51 ± 0.25 copies, and the integrated faeG achieved stable expression. All results demonstrate that this two-step integration system could achieve a high yield of heterologous gene expression by repetitive integration at a targeted chromosomal location in Lb. caseiIMPORTANCE Lactic acid bacteria (LAB), including Lactobacillus casei, have the potential for overexpression of heterologous proteins, such as bioactive molecules and enzymes. However, traditional genetic tools for expression of these proteins show genetic instability or low yields of the desired product. In this study, we provide a procedure for repetitive integration of genes at various chromosomal locations, achieving high-level and stable expression of proteins in Lb. casei without selective pressure. The protocol developed in this study provides an essential reference for chromosomal overexpression of proteins or bioactive molecules in LAB.

A Single-Plasmid Genome Editing System for Metabolic Engineering of Lactobacillus casei.

Genome engineering of Lactobacillus casei, an important industrial microorganism for dairy fermented product, currently relies on inefficient and time-consuming double crossover events. In this study, we developed an easy-to-use genome engineering strategy for metabolic engineering of L. casei for acetoin production. Plasmid pMSP456-Cre, that contains prophage recombinase operon LCABL_13040-50-60 driven by the nisin-controlled inducible expression (NICE) system and the site-specific recombinase gene cre under the control of the promoter of the lactose operon from L. casei, was constructed. Using this plasmid, integration of a hicD3 gene linear donor cassette (up-lox66-cat-lox71-down) was catalyzed by the LCABL_13040-50-60 recombinase and the cat gene was excised by the Cre/lox system with an efficiency of 60%. To demonstrate this system for sequential and iterative knocking out genes in L. casei, another three genes (pflB, ldh and pdhC) related to acetoin production were deleted with the efficiencies of 60, 40, and 60%, respectively. The yielding quadruple mutant could produce a ∼18-fold higher amount of acetoin than the wild-type and converted 59.8% of glucose to acetoin in aerobic. Therefore, these results proved this simple genome engineering strategy have potential in metabolic engineering of L. casei for production of high value-added metabolites.

Coupling the recombineering to Cre-lox system enables simplified large-scale genome deletion in Lactobacillus casei.

BACKGROUND: Lactobacillus casei is widely used in the dairy and pharmaceutical industries and a promising candidate for use as cell factories. Recently, genome sequencing and functional genomics provide the possibility for reducing L. casei genome. However, it was still limited by the inefficient and laborious genome deletion methods. RESULTS: Here, we proposed a genome minimization strategy based on LCABL_13040-50-60 recombineering and Cre-lox site-specific recombination system in L. casei. The LCABL_13040-50-60 recombineering system was used to introduce two lox sites (lox66 and lox71) into 5' and 3' ends of the targeted region. Subsequently, the targeted region was excised by Cre recombinase. The robustness of the strategy was demonstrated by single-deletion of a nonessential ~ 39.3 kb or an important ~ 12.8 kb region and simultaneous deletion of two non-continuous genome regions (5.2 and 6.6 kb) with 100% efficiency. Furthermore, a cyclical application of this strategy generated a double-deletion mutant of which 1.68% of the chromosome was sequentially excised. Moreover, biological features (including growth rate, electroporation efficiency, cell morphology or heterologous protein productivity) of these mutants were characterized. CONCLUSIONS: To our knowledge, this strategy is the first instance of sequential deletion of large-scale genome regions in L. casei. We expected this efficient and inexpensive tool can help for rapid genome streamlining and generation restructured L. casei strains used as cell factories.

Paenibacillus panacisoli enhances growth of Lactobacillus spp. by producing xylooligosaccharides in corn stover ensilages.

The knowledge about the association of lignocellulosic biomass-degrading microbes with lactic acid bacteria (LAB) in ensilages is still limited. Paenibacillus strains are important microbes in sustainable agriculture. Here, P. panacisoli SDMCC050309 was isolated from ensiled corn stover and used as an example to investigate the effects on LAB. This strain produced at least 7 xylanases, and two of them were purified and characterized. Temperature and pH optima were determined to be 55 °C and 8.0 for Xyn10 and 40 °C and 7.0 for Xyn11, respectively. They could degraded larch wood xylan and alkali-pretreated corn stover into xylooligosaccharides (XOS). Using the produced XOS to culture Lactobacillus brevis SDMCC050297 and L. parafarraginis SDMCC050300, both of them grew well with high level of acetic acid production. The same phenomenon was observed when co-culturing those two Lactobacillus strains with P. panacisoli SDMCC050309. Therefore, P. panacisoli enhances growth of LAB by producing XOS in corn stover ensilages.

Identification and functional analysis of potential prophage-derived recombinases for genome editing in Lactobacillus casei.

Numerous lactic acid bacteria (LAB) bacteriophage genomes have been sequenced, while the functional genes are yet to be exploited. In this study, a λ Red-like recombinase operon LCABL_13040-50-60 was identified from a prophage PLE3 in Lactobacillus casei BL23 genome, and its recombination function was confirmed by the replacement of a 167-bp galK fragment with chloramphenicol-resistant gene (cat) in the L. casei BL23 genome. Further functional analysis showed that LCABL_13040 and LCABL_13060 were analogs to the host nuclease inhibitor (Redγ) and 5΄-3΄ exonuclease (Redα/RecE), respectively. After optimization of recombineering conditions, including induction, homology length, recovery time and double-strand DNA substrates quantity, the recombineering efficiency reached ∼2.2 × 10-7. Subsequently, combining cre-lox technology, the optimal LCABL_13040-50-60 proteins could catalyze markerless deletion of a 167-bp galK fragment and insertion of the gfp gene as well as precision point mutation of rpoB gene in the L. casei BL23 genome, suggesting the LCABL_13040-50-60 operon encoded for three recombineering proteins. Moreover, with the assistance of Redγ, the LCABL_13040-50-60 proteins also showed recombinase activity in six other L. casei strains, L. paracasei OY and L. plantarum WCSF1. All the results demonstrated that the prophage-associated recombinases LCABL_13040-50-60 have great potential to be used for genome editing in LAB.

Development of a counterselectable seamless mutagenesis system in lactic acid bacteria.

BACKGROUND: Lactic acid bacteria (LAB) are receiving more attention to act as cell factories for the production of high-value metabolites. However, the molecular tools for genetic modifying these strains are mainly vector-based double-crossover strategies, which are laborious and inefficient. To address this problem, several counterselectable markers have been developed, while few of them could be used in the wild-type host cells without pretreatment. RESULTS: The pheS gene encoding phenylalanyl-tRNA synthetase alpha subunit was identified in Lactococcus lactis NZ9000 genome. When mutant pheS gene (pheS*) under the control of the Lc. lactis NZ9000 L-lactate dehydrogenase promoter (Pldh) was expressed from a plasmid, the resulted PheS* with an A312G substitution rendered cells sensitive to the phenylalanine analog p-chloro-phenylalanine (p-Cl-Phe). This result suggested pheS* was suitable to be used as a counterselectable marker in Lc. lactis. However, the expression level of pheS* from a chromosomal copy was too low to confer p-Cl-Phe sensitivity. Therefore, a strategy of cascading promoters was attempted for strengthening the expression level of pheS*. Expectedly, a cassette 5Pldh-pheS* with five tandem repetitive promoters Pldh resulted in a sensitivity to 15 mM p-Cl-Phe. Subsequently, a counterselectable seamless mutagenesis system PheS*/pG+host9 based on a temperature-sensitive plasmid pG+host9 harboring a 5Pldh-pheS* cassette was developed in Lc. lactis. We also demonstrated the possibility of applying pheS* to be a counterselectable marker in Lactobacillus casei BL23. CONCLUSIONS: As reported in E. coli, pheS* as a counterselectable marker has been demonstrated to be functional in targeted gene(s) deletion in Lc. lactis as well as in L. casei. Moreover, the efficiency and timesaving counterselectable seamless mutagenesis system PheS*/pG+host9 could be used in the wild-type host cells without pretreatment.