Neem plant extract-assisted synthesis of CeO2 nanoparticles for photocatalytic degradation of piroxicam and naproxen.

Piroxicam and naproxen are well-known non-steroidal anti-inflammatory drugs that are frequently detected in aquatic environments due to their widespread usage and improper disposal practices. This research investigates the photocatalytic degradation of these drugs by using CeO2 nanoparticles. The nanoparticles were synthesized by using Azadirachta indica plant extract and were characterized through various characterization techniques such as UV-visible spectroscopy, FTIR spectroscopy, SEM, EDX, and XRD. The photocatalytic degradation of piroxicam and naproxen using CeO2 nanoparticles led to the efficient removal of these pharmaceutical drugs in a short time duration with photodegradation efficiencies of 89% and 97% for naproxen and piroxicam, respectively. The photodegradation reaction was found to follow pseudo-order first-order kinetics. The recyclability of the catalyst was also studied for up to six cycles where the degradation efficiency was maintained at 100% till the 2nd cycle and was decreased by 11 and 13% for piroxicam and naproxen respectively after the 6th cycle. The current work focused on the achievement of sustainable development goals (SDGs) for water purification via environmentally benign nanoparticles to remedy water pollution as it is the most prevalent issue in developed and underdeveloped countries throughout the world.

Fabrication and prospective applications of graphene oxide-modified nanocomposites for wastewater remediation.

Water bodies have become polluted with heavy metals and hazardous contaminants as a result of fast development. Many strategies have been devised by researchers in order to remove hazardous contaminants from the aquatic environment. Utilizing graphene oxide-based composite materials as efficient adsorbents for waste water treatment, desalination, separation, and purification is gaining attraction nowadays. Some of their defining properties are high mechanical strength, hydrophilicity, remarkable flexibility, ease of synthesis, atomic thickness, and compatibility with other materials. In water treatment, high separation performance and stable graphene-based laminar structures have been the main goals. Magnetic separation is among the methods which received a lot of attention from researchers since it has been shown to be quite effective at removing harmful pollutants from aqueous solution. Graphene oxide-modified nanocomposites have provided optimal performance in water purification. This review article focusses on the fabrication of GO, rGO and MGO nanocomposites as well as the primary characterization tools needed to assess the physiochemical and structural properties of graphene-based nanocomposites. It also discusses the approaches for exploiting graphene oxide (GO), reduced graphene (rGO), and magnetic graphene oxide (MGO) to eliminate contaminants for long-term purification of water. The potential research hurdles for using fabricated MGOs as an adsorbent to remediate water contaminants like hazardous metals, radioactive metal ions, pigments, dyes, and agricultural pollutants are also highlighted.

Assessing the potential biological activities of TiO2 and Cu, Ni and Cr doped TiO2 nanoparticles.

Nanoparticles are like magic bullets and nanomaterials exhibit appealing properties. Their size and morphology can be switched by dopants for certain biological activities. Nanoparticles in combination with certain drugs enhance the antibiotic effects and may be valuable in combating bacterial resistance. The antimicrobial potency of nanoparticles depends upon their ability to bind to the surface of microbial cell membranes resulting in modulation of basic cell functions such as respiration. We report herein the antibacterial, antifungal and antioxidant activities of pure TiO2 and TiO2 doped with 4% Cu, Ni and Cr. The performance of pure and doped nanoparticles has been compared with reference compounds. A comparison of the antifungal activities of the samples doped with TiO2 reveals that Cu-TiO2 exhibits improved performance against A. fumigatus but lower antifungal activity against Mucor sp. and F. solani. Cu-TiO2 and Ni-TiO2 showed good antibacterial action against B. bronchiseptica, while Cr-TiO2 nanoparticles displayed better activity against S. typhimurium as compared to pure TiO2. Moreover, pristine TiO2 and Ni-TiO2 nanoparticles were found to demonstrate maximum total antioxidant capacity.

Electroanalysis of Ibuprofen and Its Interaction with Bovine Serum Albumin.

The current work presents a sensitive, selective, cost-effective, and environmentally benign protocol for the detection of ibuprofen (IBP) by an electrochemical probe made of a glassy carbon electrode modified with Ag-ZnO and MWCNTs. Under optimized conditions, the designed sensing platform was found to sense IBP up to a 28 nM limit of detection. The interaction of IBP with bovine serum albumin (BSA) was investigated by differential pulse voltammetry. IBP-BSA binding parameters such as the binding constant and the stoichiometry of complexation were calculated. The results revealed that IBP and BSA form a single strong complex with a binding constant value of 8.7 × 1013. To the best of our knowledge, this is the first example that reports not only IBP detection but also its BSA complexation.

Water Purification through a Novel Electrospun Carbon Nanofiber Membrane.

Here, we report water purification through novel polyvinyl alcohol (PVA)-based carbon nanofibers synthesized through the electrospinning technique. In our novel approach, we mix PVA and tetraethyl orthosilicate (TEOS) with green tea solutions with different concentrations to synthesize carbon-based nanofibers (CNFs) and further calcine at 280 °C for carbonization. The scanning electron microscopy (SEM) results show the diameter of the nanofibers to be ∼500 nm, which decreases by about 50% after carbonization, making them more suitable candidates for the filtration process. Next, using these carbon nanofibers, we prepare filters for water purification. The synthesized CNF filters show excellent performance and successful removal of contaminants from the water by analyzing the CNF-based filters before and after the filtration of water through SEM and energy-dispersive X-ray (EDX) spectroscopy. Our SEM and EDX results indicate the presence of various nanoparticles consisting of different elements such as Mg, Na, Ti, S, Si, and Fe on the filters, after the filtration of water. Additionally, the SEM results show that PVA and TEOS concentrations play an important role in the formation, uniformity, homogeneity, and particularly in the reduction of the nanofiber diameter.

Heat induction in two-dimensional graphene-Fe3O4 nanohybrids for magnetic hyperthermia applications with artificial neural network modeling.

We report the synthesis and characterization of graphene functionalized with iron (Fe3+) oxide (G-Fe3O4) nanohybrids for radio-frequency magnetic hyperthermia application. We adopted the wet chemical procedure, using various contents of Fe3O4 (magnetite) from 0-100% for making two-dimensional graphene-Fe3O4 nanohybrids. The homogeneous dispersal of Fe3O4 nanoparticles decorated on the graphene surface combined with their biocompatibility and high thermal conductivity make them an excellent material for magnetic hyperthermia. The morphological and magnetic properties of the nanohybrids were studied using scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM), respectively. The smart magnetic platforms were exposed to an alternating current (AC) magnetic field of 633 kHz and of strength 9.1 mT for studying their hyperthermic performance. The localized antitumor effects were investigated with artificial neural network modeling. A neural net time-series model was developed for the assessment of the best nanohybrid composition to serve the purpose with an accuracy close to 100%. Six Nonlinear Autoregressive with External Input (NARX) models were obtained, one for each of the components. The assessment of the accuracy of the predicted results has been done on the basis of Mean Squared Error (MSE). The highest Mean Squared Error value was obtained for the nanohybrid containing 45% magnetite and 55% graphene (F45G55) in the training phase i.e., 0.44703, which is where the model achieved optimal results after 71 epochs. The F45G55 nanohybrid was found to be the best for hyperthermia applications in low dosage with the highest specific absorption rate (SAR) and mean squared error values.

Adsorption of porphyrin and carminic acid on TiO2 nanoparticles: A photo-active nano-hybrid material for hybrid bulk heterojunction solar cells.

A photo-active nano-hybrid material consisting of titania nanoparticles, carminic acid, and sulphonic acid functionalized porphyrin is reported here. In an attempt to extend the absorption spectrum of titania to visible region by co-adsorbing carminic acid and sulphonic acid functionalized porphyrin on its surface. Interesting changes in the UV-visible and fluorescence spectra were noticed. The adsorption of carminic acid resulted in the formation of charge transfer complex with titania nanoparticles. This was confirmed by the electronic absorption and fluorescence emission spectroscopies. Chemisorption of porphyrin on the carminic acid functionalized titania further boosted the charge transfer effect. This was noticed by the increase in intensity and width of the charge transfer absorption and emission bands. Energy level diagram showed that the interaction among the constituents of the nano-hybrid assembly permitted the flow of electron in a cascade manner from carminic acid to TiO2.This also allowed direct flow of electrons either from carminic acid or porphyrin toward titania. The material was used as an active blend in hybrid bulk heterojunction solar cells. Co-functionalized TiO2-based devices were found 3.5 times more efficient than the reference device but morphology of the device proved a major setback.

Development of photocatalysts for selective and efficient organic transformations.

One of the main goals of organic chemists is to find easy, environmentally friendly, and cost effective methods for the synthesis of industrially important compounds. Photocatalysts have brought revolution in this regard as they make use of unlimited source of energy (the solar light) to carry out the synthesis of organic compounds having otherwise complex synthetic procedures. However, selectivity of the products has been a major issue since the beginning of photocatalysis. The present article encompasses state of the art accomplishments in harvesting light energy for selective organic transformations using photocatalysts. Several approaches for the development of photocatalysts for selective organic conversions have been critically discussed with the objective of developing efficient, selective, environmental friendly and high yield photocatalytic methodologies.

Characterization and DNA binding studies of unexplored imidazolidines by electronic absorption spectroscopy and cyclic voltammetry.

UV-Vis spectroscopic behavior of four imidazolidine derivatives i.e., [5-benzylideneimidazolidine-2,4-dione (NBI), 5-(2-hydroxybenzylidene)imidazolidine-2,4-dione (HBI), 5-(4-methoxybenzylidene)imidazolidine-2,4-dione (MBI) and 5-(3,4-di-methoxybenzylidene)imidazolidine-2,4-dione (DBI)] was studied in a wide pH range. Spectroscopic response of the studied compounds was found sensitive to pH and the attached substituents. Incited by anti-tumor activity, structural miscellany and biological applications of imidazolidines, the DNA binding affinity of some novel derivatives of this class of compounds was examined by cyclic voltammetry (CV) and UV-Vis spectroscopy at pH values of blood (7.4) and lysosomes (4.5). The CV results showed the following order of binding strength: KNBI (6.40×10(6)M(-1))>KHBI (1.77×10(5)M(-1))>KMBI (2.06×10(4)M(-1))>KDBI (1.01×10(4)M(-1)) at pH 7.4. The same order was also obtained from UV-Vis spectroscopy. The greater affinity of NBI justified its preferred candidature as an effective anti-cancer drug. The DNA binding propensity of these compounds was found comparable or greater than most of the clinically used anticancer drugs.