Single-Crystal P2-Na0.67Mn0.67Ni0.33O2 Cathode Material with Improved Cycling Stability for Sodium-Ion Batteries.

Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type Na0.67-δMn0.67Ni0.33O2 (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance. The SC-NMNO cathode with a large mean primary particle size (D50) of 12.7 µm was found to exhibit high cycling stability leading to 47% higher capacity retention than PC-NMNO after 175 cycles at 1C rate in the potential window 4.2-1.5 V. This could be attributed to the effective mitigation of parasitic side reactions at the electrode-electrolyte interface and suppressed intergranular cracking induced by anisotropic volume changes. This is confirmed by the lower volume variation of SC-NMNO (ΔV ∼ 1.0%) compared to PC-NMNO (ΔV ∼ 1.4%) upon charging to 4.2 V. Additionally, the SC-NMNO cathode displayed slightly higher thermal stability compared to PC-NMNO. Both cathodes exhibited good chemical stability against air and water exposure, thus enabling material storage/handling in the ambient atmosphere as well as making them suitable for aqueous processing. In this regard, PC-NMNO was investigated with two low-cost aqueous binders, carboxymethyl cellulose, and sodium trimetaphosphate, which exhibited higher binding strength and displayed excellent electrochemical performance compared to PVDF, which could potentially lead to significant cost reduction in electrode manufacturing.

Influence of Chloride Ion Substitution on Lithium-Ion Conductivity and Electrochemical Stability in a Dual-Halogen Solid-State Electrolyte.

Li+ conducting halide solid-state electrolytes (SEs) are developing as an alternative to contemporary oxide and sulfide SEs for all-solid-state batteries (ASSBs) due to their high ionic conductivity, excellent chemical and electrochemical oxidation stability, and good deformability. However, the instability of halide SEs against the Li anode is still one of the key challenges that need to be addressed. Among halides, fluorides have shown a wider electrochemical stability window due to fluoride's high electronegativity and smaller ionic radius. However, the ionic conductivity of fluoride-based SEs is lower compared to other halide-based SEs. To achieve better interface stability with the Li anode, the presence of fluoride is not only advantageous for a wider potential window but also forms a stable passivation layer at the Li/SEs interface. Therefore, developing mixed halogen-based solid electrolytes, particularly fluorine and chlorine-based SEs are promising in ASSBs. Herein, we report dual halogen-based SEs, Li2ZrF6-xClx (0 ≤ x ≤ 2), synthesized via ball-milling. The X-ray diffraction results revealed that Li2ZrF6-xClx compounds crystallize in the trigonal phase (P3̅1m). Using impedance spectroscopy, an increase in Li+ conductivity with the increase in Cl content was observed for Li2ZrF6-xClx. Compared with x = 0, Li+ conductivity for the sample with x = 1 improved by ∼5 orders of magnitude. The Li+ conductivities for Li2ZrF5Cl1 at 25 and 100 °C are 5.5 × 10-7 and 2.1 × 10-5 S/cm, respectively. Moreover, Li2ZrF5Cl1 exhibits the widest electrochemical stability window and excellent Li interface stability. Our work indicates Li2ZrF6-xClx as an attractive material for optimization in the class of halide-based solid-state Li-ion conductors.

New insights into the electrochemistry of magnesium molybdate hierarchical architectures for high performance sodium devices.

Magnesium molybdate (MgMoO4), which possesses synergistic features combining both hierarchical plate-like nanomaterials and porous architectures, has been successfully synthesized through a facile combustion synthesis at a low temperature. The hierarchical architecture is characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), scanning transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analyses. The as-obtained MgMoO4 nanoplates showed a porous structure with a pore-size distribution ranging from 50 to 70 nm. This porosity provides an electron transport pathway and enhanced surface reaction kinetics. The binding energies measured for Mg 2p, Mo 3d, 3p and O 1s are consistent with the literature, and with the metal ions being present as M(ii) and M(vi) states, respectively. This indicates that the oxidation states of the metal cations are as expected. The electrochemical behaviour of MgMoO4 was investigated using aqueous (NaOH) and non-aqueous solvents (NaClO4 in EC : DMC : FEC) for supercapacitor and battery applications. The sodium-ion capacitor involves ion absorption and insertion into the MgMoO4 electrodes resulting in superior power and energy densities. However, the cycling stability was found to be stable only for an aqueous system. The formation of a solid electrolyte surface layer restricted the reversible capacity of the MgMoO4 in the sodium-battery. Nevertheless, it does offer some promise as an anode material for storing energy with high rate performance and excellent capacity retention. Detailed comparative analyses of various electrolytes in storage devices such as hybrid sodium-ion capacitors and sodium-ion batteries are vital for the integration of hierarchical structured materials into practical applications. The reaction mechanisms are postulated.

Vanadium Oxyfluoride/Few-Layer Graphene Composite as a High-Performance Cathode Material for Lithium Batteries.

Metal oxyfluoride compounds are gathering significant interest as cathode materials for lithium ion batteries at the moment because of their high theoretical capacity and resulting high energy density. In this regard, a new and direct approach is presented to synthesize phase-pure vanadium oxyfluoride (VO2F). The structure of VO2F was identified by Rietveld refinement of the powder X-ray diffraction (XRD) pattern. It crystallizes in a perovskite-type structure with disorder of the oxide and fluoride ions. The as-synthesized VO2F was tested as a cathode material for lithium ion batteries after being surface-coated with few-layer graphene. The VO2F delivered a first discharge capacity of 254 mA h g(-1) and a reversible capacity of 208 mA h g(-1) at a rate of C/20 for the first 20 cycles with an average discharge voltage of 2.84 V, yielding an energy density of 591 W h kg(-1). Improved rate capability that outperforms the previous report has been achieved, showing a discharge capacity of 150 mA h g(-1) for 1 C. The structural changes during lithium insertion and extraction were monitored by ex-situ XRD analysis of the electrodes discharged and charged to various stages. Lithium insertion results in an irreversible structural change of the anion lattice from (3)/4 cubic close packing to hexagonal close packing to accommodate the inserted lithium ions while keeping the overall space-group symmetry. For the first time we have revealed a structural change for the ReO3-type structure of as-prepared VO2F to the RhF3 structure after lithiation/delithiation, with structural changes that have not been observed in previous reports. Furthermore, the new synthetic approach described here would be a platform for the synthesis of new oxyfluoride compounds.