RESUMO
PURPOSE: Evaluation of the effectiveness of a new method of plasty of an extensive defect in the mucous membrane of the Schneiderian membrane, which occurs during the sinus lift operation, using an artificial collagen membrane and a developed method for fixing it. MATERIAL AND METHODS: A total of 188 patients took part in the study, all of these patients underwent an open sinus lift operation with simultaneous or delayed implantation. Operations were performed under balanced anesthesia. Six months after the operation, according to computed tomography, the height of the formed bone regenerate was estimated. In the area of each missing tooth, the initial bone height and the resulting bone grafting were assessed. Then we compared the average values before and after the operation, the average height difference before and after the operation. RESULTS: In 19 patients during the sinus lift there was an accidental extensive rupture of the mucous membrane of the maxillary sinus. Elimination of the mucosal defect was carried out according to our patented method. All 188 patients were diagnosed with partial loss of teeth with bone tissue deficiency in the distal maxillary sinus. The height of the alveolar process in the projection of missing teeth ranged from 0.5 mm to 5 mm. Delayed dental implantation was performed when the height of the alveolar bone was less than 3 mm, direct when the presence of 3-5 mm. After 6 months, dental implants were installed in the reconstruction zone, after another 6 months - rational prosthetics. CONCLUSIONS: The proposed method of plastic surgery has the following advantages. Firstly, it allows to eliminate the defect of the mucous membrane together with an increase in the height of the alveolar ridge. Secondly, after this method, the integrity of the mucous membrane will be restored. Thirdly, with an alveolar bone height of 3 mm or more, dental implants should also be installed.
Assuntos
Aumento do Rebordo Alveolar , Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Humanos , Implantação Dentária Endóssea/métodos , Mucosa Nasal/cirurgia , Seio Maxilar/diagnóstico por imagem , Seio Maxilar/cirurgia , Aumento do Rebordo Alveolar/métodos , Levantamento do Assoalho do Seio Maxilar/métodos , Maxila/cirurgiaRESUMO
An experimental in vivo model has been developed on the rabbit mandible to study reparative regeneration of alveolar bone after intercortical split osteotomy and the role of the periosteum in the process of reparative osteogenesis. The peculiarity of this model is fixation of the periosteum over the reconstruction zone, which allows preserving the bone block displaced during surgery and leads to the formation of an organotypic structure of the regenerate with cortical and spongy bone.
Assuntos
Regeneração Óssea , Mandíbula , Animais , Coelhos , Mandíbula/cirurgia , Osteogênese , Periósteo/cirurgia , Modelos TeóricosRESUMO
Current technologies of plasma electrolytic oxidation (PEO) for modifying the surfaces of dental implants made of the Grade IV titan alloy provide predictable long-term results in implant dentistry. The aim of the study is to evaluate the efficacy of PEO technology comparing two types of surface modification of dental implants made of VT1-0 medical titanium alloy. Materials and Methods: 50 IRIS dental implants (Scientific Production Company LICOSTOM, Russia), 10-mm long and 4 mm in diameter, were manufactured from the VT1-0 alloy. The implant surface was treated by two PEO methods: 1) in the aqueous solution of alkaline electrolyte without any additional modifiers (PEO-Ti); 2) in the aqueous solution of orthophosphoric acid-based electrolyte containing calcium carbonate (PEO-Ca). Implants made of VT1-0 alloy after milling and without additional treatment served as control samples. The implant surfaces were studied by electron microscopy and energy dispersive X-ray spectrometry. Some of the implants were installed in sheep, samples were obtained at 2, 4, and 8 weeks and studied by microcomputer tomography. Results: Regardless of the electrolyte composition, a highly developed porous surface was formed in the samples with PEO-modified surfaces. The surface of the PEO-Ti samples in a simple unmodified electrolyte was characterized by a large number of open pores with a wide range of size distribution from 200 nm to 3 µm. The pore size distribution was of a monomodal character, with a maximum near 0.23 µm. The PEO samples in the Ca-containing electrolyte had pores also in a wide range from ~80 nm to ~7 µm. The pore distribution, in contrast to PEO-Ti, was bimodal in nature, with the main maximum in the region of 1.05 µm and the concomitant maximum near 2.45 µm.The obtained surfaces of both types (PEO with Ca and Ti) possessed high purity and optimal microroughness for osseointegration. Both types of PEO treatment (PEO with Ca and Ti) have demonstrated a similar osseointegrative potential, nevertheless, the surface of the PEO-Ca showed a better contact with the implant surface (49.8%) than PEO-Ti (42.4%) obviously due to the presence of calcium in its composition. Conclusion: The PEO-formed implant surfaces demonstrate high osseointegrative properties after any variants of treatment and show the potential for application in osteoporosis.
Assuntos
Implantes Dentários , Animais , Ovinos , Ligas , Carbonato de Cálcio , Cálcio da Dieta , EletrólitosRESUMO
The aim of the study was to evaluate the use of barophoresis for the delivery of liquid-air drug substances to the gums using a mathematical model of the interaction of the drug mixture with periodontal tissues. Materials and Methods: The solution to the problem was preceded by generation of a geometric CAD model of the device and nozzle for barophoresis, including the nozzle and injector geometry. The Ansys SpaceClaim software package was used to generate the CAD geometry. Results: When solving the problem of finding the optimal distance from the nozzle to the gum surface, the numerical modeling showed that at a distance of 5 mm, the volume fraction of liquid in the mixture is 18-20%. The mixture actually breaks through the gum, filling 0.8 mm of the gum thickness and spreading symmetrically to the sides at a distance of up to 3 cm, forming a cavity. At a distance of 10 mm from the nozzle to the gum surface, the liquid volume fraction in the mixture close to the gum lies in a narrow range of values of 5 to 7%. The mixture touches the surface of the gums, penetrating slightly - at a distance of 0.30-0.45 mm. At a distance of 15 mm from the nozzle to the gum surface, the volume fraction of liquid in the mixture near the gum lies in the range of 2-5%. The mixture slightly touches the gum surface, getting inside at a distance of up to 0.2 mm, having practically no effect on the gum. Conclusion: The developed mathematical model confirmed the feasibility of application of barophoresis in the treatment of chronic generalized periodontitis. The optimal distance from the nozzle to the surface should be considered to be 10-15 mm. This distance is safe and allows the drug delivery to a depth of 0.45 mm.
Assuntos
Sistemas de Liberação de Medicamentos , Periodontite , HumanosRESUMO
Biodegradable and biocompatible polymers are actively used in tissue engineering to manufacture scaffolds. Biomedical properties of polymer scaffolds depend on the physical and chemical characteristics and biodegradation kinetics of the polymer material, 3D microstructure and topography of the scaffold surface, as well as availability of minerals, medicinal agents, and growth factors loaded into the scaffold. However, in addition to the above, the intrinsic biological activity of the polymer and its biodegradation products can also become evident. This review provides studies demonstrating that scaffolds made of poly(3-hydroxybutyrate) (PHB) and its copolymers have their own biological activity, and namely, osteoinductive properties. PHB can induce differentiation of mesenchymal stem cells in the osteogenic direction in vitro and stimulates bone tissue regeneration during the simulation of critical and non-critical bone defects in vivo.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Alicerces Teciduais/química , Ácido 3-Hidroxibutírico , Poliésteres/química , Poliésteres/farmacologia , Polímeros/químicaRESUMO
The purpose of the study was to perform a comparative static and dynamic finite element analysis of various taper and cylindrical implant-abutment connections in three-dimensional (3D) models including: abutment, fixing screw, implant, cortical bone, cancellous bone. 3D implant model was IRIS LIKO-M system (Russia) 4 mm diameter and 10 mm length. All the models (M1-M6) were built in the same way. While maintaining the external design of IRIS LIKO-M implant, they differed only by taper angle 1.25°, 5°, 9° and its height - 0.45 and 1.85 mm; the models (M7, M8) had a cylindrical connection with a joint height of 0.45 and 1.85 mm. The bone model was 6 mm width, included cortical layer was 3 mm and the inner cancellous bone. The results of static FEA of an occlusal load showed that implant with 1.85 mm abutment connection transfer strain from edge of a cortical bone to its inner layer thus preventing marginal bone resorption. The best results showed implant model with conical taper 5° and 1.85 mm height: the smallest von Mises stress in cortical layer at tightening of the fixing screw and at masticatory load, and the larger margin of safety of an implant, the abutment and the fixing screw. The results of dynamic FEA of implant with cylindrical connection demonstrate that the gap between an abutment and an implant may occur and lead to fixing screw loosening or fracture. At the same time, the implant design with knot of interface of conical type 5° remains tight at dynamic load.
Assuntos
Projeto do Implante Dentário-Pivô , Implantes Dentários , Fenômenos Biomecânicos , Dente Suporte , Análise do Estresse Dentário , Análise de Elementos Finitos , Federação Russa , Estresse MecânicoRESUMO
The aim of the study was to provide a mathematical justification of the possibility of using 6.5 mm IRIS implants and to evaluate the results of orthopedic treatment in patients with partial loss of teeth. For the calculations was constructed of a composite three-dimensional computer models: the abutment screw-implant-bone. A total of 3 models were prepared: M1-implant in the spongy bone tissue, this model corresponds to the implantation on the HF when replacing one molar; M2-2 implants in the spongy bone tissue located at a distance of 4 mm connected via abutments, this model corresponds to the implantation of RF when replacing two molars; M3-implant in the cortical bone tissue, this model corresponds to the implantation of LF when replacing one molar. Loading of implants was carried out by occlusive force applied to its end surface. The results of the calculations showed that the equivalent stresses and limiting stresses of compression-tension are within the permissible values, which were obtained by us earlier in respect of the irregular implants and are consistent with the results of calculations for other systems of short implants. The clinical part of the work consisted in the treatment of 27 patients with partial loss of teeth, who had 41 iris evolution implants with a diameter of 5 mm, length of 6.5 mm after 3 years, there was a slow bone resorption in the cervical region not exceeding 0.35 mm, which corresponds to generally accepted international standards. During the first three years of operation there were no cases of loss of established implants. Thus, the data of mathematical modeling by finite element method and retrospective three-year analysis of prosthetics on IRIS evolution implants with length of 6.5 mm showed that the use of short implants in the recovery of upper and lower jaw molars is an effective method with a high success rate at long - term and resorption level of 0.34 mm.
Assuntos
Implantes Dentários , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Força de Mordida , Simulação por Computador , Análise do Estresse Dentário , Análise de Elementos Finitos , Humanos , Estudos Retrospectivos , Estresse MecânicoRESUMO
Biotechnology industry is rapidly developing. The elaboration of new biomaterials for bone reconstruction is one of the most perspective directions in tissue engineering. There are millions of surgical operations associated with use of bone graft materials every year. In this article we tried to analyze and systematize data about advanced technologies and modern trends in the preparation of bio-composite bone graft materials. Special attention is given to 3D-prototyping that allows making bone implants with individual form. Introduction of molecular biology technologies such as activating specific cytokines and growth factors at the right time makes it possible to optimize bone regeneration process. The article has also some suggestions on further improvement of the bone engineering technology.
Assuntos
Processo Alveolar/anatomia & histologia , Regeneração Óssea , Substitutos Ósseos , Mandíbula/anatomia & histologia , Impressão Tridimensional , Bioengenharia , Simulação por Computador , Humanos , Imageamento Tridimensional , Modelos Anatômicos , Engenharia Tecidual/métodosRESUMO
UNLABELLED: According to a research AIM: we carried out the comparative final element analysis of stress in implant construction and the bone surrounding it. The best result showed implants with platform switching and cone interface between implant and abatement. Such combination of elements allows maintaining implant construction stability and decrease the load on cortical bone.
Assuntos
Interface Osso-Implante/fisiopatologia , Dente Suporte/efeitos adversos , Implantação Dentária Endóssea/efeitos adversos , Implantes Dentários/efeitos adversos , Planejamento de Prótese Dentária/efeitos adversos , Análise do Estresse Dentário , Módulo de Elasticidade , Humanos , Modelos TeóricosRESUMO
Bone tissue damages are one of the dominant causes of temporary disability and developmental disability. Currently, there are some methods of guided bone regeneration employing different osteoplastic materials and insulation membranes used in surgery. In this study, we have developed a method of preparation of porous membranes from the biopolymer poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV), produced by a strain of Azotobacter chroococcum 7B. The biocompatibility of the porous membranes was investigated in vitro using mesenchymal stem cells (MSCs) and in vivo on laboratory animals. The cytotoxicity test showed the possibility of cell attachment on membrane and histological studies confirmed good insulating properties the material. The data obtained demonstrate the high biocompatibility and the potential application of insulating membranes based on PHBV in bone tissue engineering.
Assuntos
Regeneração Óssea/efeitos dos fármacos , Fraturas Ósseas/metabolismo , Fraturas Ósseas/terapia , Membranas Artificiais , Células-Tronco Mesenquimais/metabolismo , Poliésteres , Animais , Feminino , Fraturas Ósseas/patologia , Masculino , Células-Tronco Mesenquimais/patologia , Poliésteres/química , Poliésteres/farmacologia , Coelhos , Suínos , Porco MiniaturaRESUMO
Class II malocclusions are of interest to the practicing orthodontists since they constitute a significant percentage of the cases they treat. The process of establishing a treatment plan requires an assessment of therapeutic modifiability. The purpose of this article is to provide a perspective on the characteristics, development, etiology and broad treatment consideration in Class II malocclusions.
Assuntos
Má Oclusão Classe II de Angle , Humanos , Má Oclusão Classe II de Angle/diagnóstico , Má Oclusão Classe II de Angle/etiologia , Má Oclusão Classe II de Angle/cirurgia , Ortodontia Corretiva/métodosAssuntos
Carcinoma de Células Escamosas/etiologia , Leucoplasia Oral/diagnóstico , Leucoplasia Oral/terapia , Mucosa Bucal/patologia , Neoplasias Bucais/etiologia , Lesões Pré-Cancerosas/diagnóstico , Carcinoma de Células Escamosas/patologia , Transformação Celular Neoplásica , Humanos , Leucoplasia Oral/classificação , Leucoplasia Oral/complicações , Leucoplasia Oral/patologia , Neoplasias Bucais/patologia , Lesões Pré-Cancerosas/patologia , Ensaios Clínicos Controlados Aleatórios como AssuntoRESUMO
To prove the efficiency of dental implantation in complex treatment of patients with class III malocclusion and partial teeth loss. Nine patients aged 18-35 years with class III malocclusion and partial teeth loss were included in the study. All patients received two-step treatment involving orthodontic correction with two-step implantation and provisional restorations placement followed by orthognatic surgery procedure. The patients were followed-up for three years with no recurrent malocclusion or implant failure revealed, thus proving dental implantation to be useful tool in complex oral rehabilitation of patients with class III malocclusion and partial teeth loss.
Assuntos
Implantação Dentária Endóssea/métodos , Má Oclusão Classe III de Angle/reabilitação , Perda de Dente/reabilitação , Adolescente , Adulto , Implantes Dentários , Humanos , Masculino , Má Oclusão Classe III de Angle/complicações , Má Oclusão Classe III de Angle/cirurgia , Osteotomia de Le Fort , Perda de Dente/complicações , Resultado do Tratamento , Adulto JovemRESUMO
The study involved 152 patients with facial burns consequences (including 118 patients with burns of the mouth). Specific post-burn deformities were revealed: I type - deformity of the anatomical unit caused by scar tissue traction from adjacent regions (the unit itself preserved); II type - distortion caused by single scars without significant tissue defect; III type - post-burn deformities with total or subtotal skin scarring; IV type - tissue defects characterized by loss of anatomical unit with deep anatomical structures down to the bone and possible exposition of the paranasal sinuses and face cavities. Such classification based on the amount of tissue loss dictates the choice of surgical technique, allowing optimal functional and aesthetic treatment results.
Assuntos
Queimaduras/complicações , Queimaduras/reabilitação , Cicatriz/reabilitação , Boca/cirurgia , Adolescente , Adulto , Cicatriz/etiologia , Cicatriz/cirurgia , Procedimentos Cirúrgicos Dermatológicos , Face , Feminino , Humanos , Masculino , Adulto JovemRESUMO
The study focuses on long term results of restorative treatment with dental implant system Liko-M. The study included 503 patients examined and 274 patients treated aged 20-69 with partial or complete teeth loss. The patients were examined and treated at the Department of Maxillofacial and Oral Surgery of Nizhny Novgorod State Medical Academy and in 4 dental practices in Moscow and Nizhny Novgorod. Two-staged implantation method was applied. The treatment met esthetic and functional requirements. Marginal bone resorption was estimated as 0,1 to 1 mm within 5 years follow-up. LIKO-M dental implant system thus proved to be efficient both esthetically and functionally and may be used for compete oral rehabilitation of edentulous patients.
Assuntos
Implantes Dentários/estatística & dados numéricos , Estética Dentária , Perda de Dente/cirurgia , Adulto , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Federação Russa , Resultado do Tratamento , Adulto JovemRESUMO
Cancer-testis (CT) antigens are normally expressed mostly in human germ cells, there is also an aberrant expression in some tumor cells. This expression profile makes them potential tumor growth biomarkers and a promising target for tumor immunotherapy. Specificity of CT genes expression in oral malignant and potentially malignant diseases, e.g. oral leukoplakia, is not yet studied. Data on CT genes expression profile in leukoplakia would allow developing new diagnostic methods with potential value for immunotherapy and prophylaxis of leukoplakia malignization. In our study we compared CT genes expression in normal oral mucosa, oral leukoplakia and oral squamous cell carcinoma. We are the first to describe CT genes expression in oral leukoplakia without dysplasia. This findings make impossible differential diagnosis of oral leukoplakia and squamous cell carcinoma on the basis of CT genes expression. The prognostic value of CT genes expression is still unclear, therefore the longitudinal studies are necessary.
Assuntos
Antígenos de Neoplasias/metabolismo , Carcinoma de Células Escamosas/imunologia , Transformação Celular Neoplásica , Neoplasias Laríngeas/imunologia , Leucoplasia Oral/imunologia , Mucosa Bucal/imunologia , Neoplasias Bucais/imunologia , Lesões Pré-Cancerosas/imunologia , Neoplasias Testiculares/imunologia , Testículo/imunologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Regulação Neoplásica da Expressão Gênica , Glote , Humanos , Masculino , Pessoa de Meia-Idade , Mucosa Bucal/patologia , Valor Preditivo dos Testes , Prognóstico , Neoplasias da Língua/imunologiaRESUMO
For cases of considerable atrophy of alveolar bone updating method of vinir plastics with iliac crest transplant is offered. The technique of capital GHE, Cyrillic-shaped bone transplant formation is developed. Use of capital GHE, Cyrillic-shaped bone transplant from iliac crest allows increase volume of alveolar part of jaws by height and width. Resorption of bone transplant is reduced by additional use of biomaterials and collagen membrane. Authors received positive results of the delayed implantation after bone plastic.
Assuntos
Perda do Osso Alveolar/cirurgia , Aumento do Rebordo Alveolar/métodos , Transplante Ósseo , Implantação Dentária , Íleo/transplante , Adulto , Feminino , HumanosRESUMO
Topografical anatomical features of maxillary sinus structure create complexities for carrying out the sinus lifting operation. With Schneider's membrane defect from 3 to 6 mm the technique of its elimination with use of platelet poor plasma is offered. Defects in mucous membrane from 3 to 6 mm arise during operation in 7,9% of cases. In such cases bone window is expanding, mucous membrane is mobilizing and the defect is covered with platelet poor plasma received from patient's blood.
Assuntos
Implantação Dentária , Seio Maxilar/lesões , Seio Maxilar/cirurgia , Mucosa Nasal/lesões , Plasma , Adesivos Teciduais/administração & dosagem , Plaquetas , Feminino , Humanos , Pessoa de Meia-Idade , Procedimentos de Cirurgia Plástica/efeitos adversosRESUMO
As part of the plan to prepare mandible alveolar part to dental implantation in cases of considerable vertical atrophy several variants of osteoplastic operations allowing to increase the height of mandible alveolar part 2 methods of sandwich plastics were offered by us: sandwich plastics by bone flap elevation and sandwich plastics by bone flap rotation. The operation schemes and operation course description were presented; there were proved positive postoperative results of the vertical bone resorption elimination and results of dental implantation on received bone volume of the jaw.
Assuntos
Perda do Osso Alveolar/cirurgia , Aumento do Rebordo Alveolar/métodos , Implantação Dentária , Retalhos Cirúrgicos , Adulto , Idoso , Humanos , Pessoa de Meia-Idade , Procedimentos de Cirurgia PlásticaRESUMO
During the operation of sinus lifting and occurrence of Schneider's membrane defect in the size no more than 3 mm the technique of its elimination is offered. Anatomic features of structure of maxilla sinus and error of surgical technics can lead to intraoperative rupture of a Schneider's membrane. At the size of defect no more than 3 mm are recommended to separate a membrane on all perimeter of the bottom third of sinus and then to lift it up until edges of the damaged mucous membrane will block, <