Methodology for the identification of small molecule inhibitors of the Fanconi Anaemia ubiquitin E3 ligase complex.

DNA inter-strand crosslinks (ICLs) threaten genomic stability by creating a physical barrier to DNA replication and transcription. ICLs can be caused by endogenous reactive metabolites or from chemotherapeutics. ICL repair in humans depends heavily on the Fanconi Anaemia (FA) pathway. A key signalling step of the FA pathway is the mono-ubiquitination of Fanconi Anaemia Complementation Group D2 (FANCD2), which is achieved by the multi-subunit E3 ligase complex. FANCD2 mono-ubiquitination leads to the recruitment of DNA repair proteins to the site of the ICL. The loss of FANCD2 mono-ubiquitination is a common clinical feature of FA patient cells. Therefore, molecules that restore FANCD2 mono-ubiquitination could lead to a potential drug for the management of FA. On the other hand, in some cancers, FANCD2 mono-ubiquitination has been shown to be essential for cell survival. Therefore, inhibition of FANCD2 mono-ubiquitination represents a possible therapeutic strategy for cancer specific killing. We transferred an 11-protein FANCD2 mono-ubiquitination assay to a high-throughput format. We screened 9,067 compounds for both activation and inhibition of the E3 ligase complex. The use of orthogonal assays revealed that candidate compounds acted via non-specific mechanisms. However, our high-throughput biochemical assays demonstrate the feasibility of using sophisticated and robust biochemistry to screen for small molecules that modulate a key step in the FA pathway. The future identification of FA pathway modulators is anticipated to guide future medicinal chemistry projects with drug leads for human disease.

Catalytic Conversion of Biorenewable Sugar Feedstocks into Market Chemicals.

The transformation of low cost sugar feedstocks into market chemicals and monomers for existing or novel high performance polymers by chemical catalysis is reviewed. Emphasis is given to industrially relevant, continuous flow, trickle bed processes. Since long-term catalyst stability under hydrothermal conditions is an important issue to be addressed in liquid phase catalysis using carbohydrate feedstocks, we will primarily discuss the results of catalytic performance for prolonged times on stream. In particular, the selective aerobic oxidation of glucose to glucaric acid and the subsequent selective hydrogenation to adipic acid is reviewed. Hydroxymethylfurfural (HMF), which is readily available from fructose, can be upgraded by oxidation to furan dicarboxylic acid (FDCA) or by consecutive reduction and hydrogenolysis to hexanetriol (HTO) followed by hydrogenolysis to biobased hexanediol (HDO). Direct amination of HDO yields biobased hexamethylene diamine (HMDA). Aerobic oxidation of HDO represents an alternative route to biobased adipic acid. HMDA and adipic acid are the monomers required for the production of nylon- 6,6, a major polymer for engineering and fibre applications.

Plasmodium falciparum merozoite surface protein 2 is unstructured and forms amyloid-like fibrils.

Several merozoite surface proteins are being assessed as potential components of a vaccine against Plasmodium falciparum, the cause of the most serious form of human malaria. One of these proteins, merozoite surface protein 2 (MSP2), is unusually hydrophilic and contains tandem sequence repeats, characteristics of intrinsically unstructured proteins. A range of physicochemical studies has confirmed that recombinant forms of MSP2 are largely unstructured. Both dimorphic types of MSP2 (3D7 and FC27) are equivalently extended in solution and form amyloid-like fibrils although with different kinetics and structural characteristics. These fibrils have a regular underlying beta-sheet structure and both fibril types stain with Congo Red, but only the FC27 fibrils stain with Thioflavin T. 3D7 MSP2 fibrils seeded the growth of fibrils from 3D7 or FC27 MSP2 monomer indicating the involvement of a conserved region of MSP2 in fibril formation. Consistent with this, digestion of fibrils with proteinase K generated resistant peptides, which included the N-terminal conserved region of MSP2. A monoclonal antibody that reacted preferentially with monomeric recombinant MSP2 did not react with the antigen in situ on the merozoite surface. Glutaraldehyde cross-linking of infected erythrocytes generated MSP2 oligomers similar to those formed by polymeric recombinant MSP2. We conclude that MSP2 oligomers containing intermolecular beta-strand interactions similar to those in amyloid fibrils may be a component of the fibrillar surface coat on P. falciparum merozoites.

Structure of the malaria antigen AMA1 in complex with a growth-inhibitory antibody.

Identifying functionally critical regions of the malaria antigen AMA1 (apical membrane antigen 1) is necessary to understand the significance of the polymorphisms within this antigen for vaccine development. The crystal structure of AMA1 in complex with the Fab fragment of inhibitory monoclonal antibody 1F9 reveals that 1F9 binds to the AMA1 solvent-exposed hydrophobic trough, confirming its importance. 1F9 uses the heavy and light chain complementarity-determining regions (CDRs) to wrap around the polymorphic loops adjacent to the trough, but uses a ridge of framework residues to bind to the hydrophobic trough. The resulting 1F9-AMA1-combined buried surface of 2,470 A(2) is considerably larger than previously reported Fab-antigen interfaces. Mutations of polymorphic AMA1 residues within the 1F9 epitope disrupt 1F9 binding and dramatically reduce the binding of affinity-purified human antibodies. Moreover, 1F9 binding to AMA1 is competed by naturally acquired human antibodies, confirming that the 1F9 epitope is a frequent target of immunological attack.

A partially structured region of a largely unstructured protein, Plasmodium falciparum merozoite surface protein 2 (MSP2), forms amyloid-like fibrils.

Merozoite surface protein 2 (MSP2) from the human malaria parasite Plasmodium falciparum is expressed as a GPI-anchored protein on the merozoite surface. It has been implicated in the process of erythrocyte invasion and is a leading vaccine candidate. MSP2 is an intrinsically unstructured protein (IUP), and recombinant MSP2 forms amyloid-like fibrils upon storage. We have examined synthetic peptides corresponding to sequences in the conserved N-terminal region of MSP2 for the presence of local structure and the ability to form fibrils related to those formed by full-length MSP2. In a 25-residue peptide corresponding to the entire N-terminal region of mature MSP2, structures calculated from NMR data show the presence of nascent helical and turn-like structures. An 8-residue peptide from the central region of the N-terminal domain (residues 8-15) also formed a turn-like structure. Both peptides formed fibrils that were similar but not identical to the amyloid-like fibrils formed by full-length MSP2. Notably, the fibrils formed by the peptides bound both Congo Red and Thioflavin T, whereas the fibrils formed by full-length MSP2 bound only Congo Red. The propensity of peptides from the N-terminal conserved region of MSP2 to form amyloid-like fibrils makes it likely that this region contributes to fibril formation by the full-length protein. Thus, in contrast to the more common pathway of amyloid formation by structured proteins, which proceeds via partially unfolded intermediates that then undergo beta-aggregation, MSP2 is an example of a largely unstructured protein with at least one small structured region that has an important role in fibril formation.

Structure of AMA1 from Plasmodium falciparum reveals a clustering of polymorphisms that surround a conserved hydrophobic pocket.

Apical membrane antigen 1 (AMA1) is a leading malaria vaccine candidate that possesses polymorphisms that may pose a problem for a vaccine based on this antigen. Knowledge of the distribution of the polymorphic sites on the surface of AMA1 is necessary to obtain a detailed understanding of their significance for vaccine development. For this reason we have sought to determine the three-dimensional structure of AMA1 using x-ray crystallography. The central two-thirds of AMA1 is relatively conserved among Plasmodium species as well as more distantly related apicomplexan parasites, and contains two clusters of disulfide-bonded cysteines termed domains I and II. The crystal structure of this fragment of AMA1 reported here reveals that domains I+II consists of two intimately associated PAN domains. PAN domain I contains many long loops that extend from the domain core and form a scaffold for numerous polymorphic residues. This extreme adaptation of a PAN domain reveals how malaria parasites have introduced significant flexibility and variation into AMA1 to evade protective human antibody responses. The polymorphisms on the AMA1 surface are exclusively located on one side of the molecule, presumably because this region of AMA1 is most accessible to antibodies reacting with the parasite surface. Moreover, the most highly polymorphic residues surround a conserved hydrophobic trough that is ringed by domain I and domain II loops. Precedents set by viral receptor proteins would suggest that this is likely to be the AMA1 receptor binding pocket.

Structure and inter-domain interactions of domain II from the blood-stage malarial protein, apical membrane antigen 1.

The malarial surface antigen apical membrane antigen (AMA1), from Plasmodium falciparum, is a leading candidate for inclusion in a vaccine against malaria. AMA1 is synthesised by mature blood-stages of the parasite and is located initially in the apical organelles of the merozoite. Prior to merozoite invasion of host erythrocytes, it is processed into a 66 kDa type 1 integral membrane protein on the merozoite surface. The pattern of disulphide bonds in AMA1 has been the basis for separation of the ectodomain into three domains, with three, two and three disulphide bonds, respectively. We have determined the solution structure of a 16kDa construct corresponding to the putative second domain of AMA1. While circular dichroism and hydrodynamic data were consistent with a folded structure for domain II, its NMR spectra were characterised by broad lines and significant peak overlap, more typical of a molten globule. Consistent with this, domain II bound the fluorescent dye 8-anilino-1-naphthalene sulphonate (ANS). We have nonetheless determined a structure, which defines the secondary structure elements and global fold. The two disulphide bonds link the N and C-terminal regions of the molecule, which come together to form a four-stranded beta-sheet linked to a short helix. A long loop linking the N and C-terminal regions contains four other alpha-helices, the locations of which are not fixed relative to the beta-sheet core, even though they are well-defined locally. Very recently this region of domain II has been shown to contain the epitope recognised by the invasion-inhibitory antibody 4G2, even though it does not contain any of the polymorphisms that are regarded as having arisen in response to the pressure of immune recognition.

Refolding, purification, and crystallization of apical membrane antigen 1 from Plasmodium falciparum.

Extracellular domains of malaria antigens almost invariably contain disulphide linkages but lack N- and O-linked glycosylation. The best practical approach to generating recombinant extracellular Plasmodium proteins is not established and the problems encountered when using a bacterial expression/refolding approach are discussed in detail. Limited proteolysis experiments were used to identify a relatively non-flexible core region of the Plasmodium falciparum protein apical membrane antigen 1 (AMA1), and refolding/purification was used to generate two fragments of AMA1. Several chromatographically distinct AMA1 variants were identified that are presumably differentially refolded proteins. One of these AMA1 preparations proved to be crystallizable and generated two crystal forms that diffracted X-rays to 2 A resolution.

Allele specificity of naturally acquired antibody responses against Plasmodium falciparum apical membrane antigen 1.

Antibody responses against proteins located on the surface or in the apical organelles of merozoites are presumed to be important components of naturally acquired protective immune responses against the malaria parasite Plasmodium falciparum. However, many merozoite antigens are highly polymorphic, and antibodies induced against one particular allelic form might not be effective in controlling growth of parasites expressing alternative forms. The apical membrane antigen 1 (AMA1) is a polymorphic merozoite protein that is a target of naturally acquired invasion-inhibitory antibodies and is a leading asexual-stage vaccine candidate. We characterized the antibody responses against AMA1 in 262 individuals from Papua New Guinea exposed to malaria by using different allelic forms of the full AMA1 ectodomain and some individual subdomains. The majority of individuals had very high levels of antibodies against AMA1. The prevalence and titer of these antibodies increased with age. Although antibodies against conserved regions of the molecule were predominant in the majority of individuals, most plasma samples also contained antibodies directed against polymorphic regions of the antigen. In a few individuals, predominantly from younger age groups, the majority of antibodies against AMA1 were directed against polymorphic epitopes. The D10 allelic form of AMA1 apparently contains most if not all of the epitopes present in the other allelic forms tested, which might argue for its inclusion in future AMA1-based vaccines to be tested. Some important epitopes in AMA1 involved residues located in domain II or III but depended on more than one domain.

Allelic polymorphisms in apical membrane antigen-1 are responsible for evasion of antibody-mediated inhibition in Plasmodium falciparum.

Apical membrane antigen-1 (AMA-1) is a target of antibodies that inhibit invasion of Plasmodium falciparum into human erythrocytes and is a candidate for inclusion in a malaria vaccine. We have identified a line of P. falciparum (W2mef) less susceptible to anti-AMA1 antibodies raised to the protein from a heterologous parasite line (3D7). We have constructed transgenic P. falciparum expressing heterologous AMA-1 alleles. In vitro invasion assays show that these transgenic parasites differ from parental lines in susceptibility to inhibitory antibodies, providing direct evidence that sequence polymorphisms within AMA-1 are responsible for evasion of immune responses that inhibit parasite invasion. We also generated a parasite line that would express a chimeric AMA-1 protein, in which highly polymorphic residues within domain 1 were exchanged. Inhibition assays suggest that these residues are not sufficient for inhibition by invasion-blocking antibodies. This study is the first to use P. falciparum allelic exchange to examine the relationship between genetic diversity and susceptibility to protective antibodies. The findings have important implications for the development of an AMA-1-based malaria vaccine.

Antibodies to malaria peptide mimics inhibit Plasmodium falciparum invasion of erythrocytes.

Apical membrane antigen 1 (AMA1) is expressed on the surfaces of Plasmodium falciparum merozoites and is thought to play an important role in the invasion of erythrocytes by malaria parasites. To select for peptides that mimic conformational B-cell epitopes on AMA1, we screened a phage display library of >10(8) individual peptides for peptides bound by a monoclonal anti-AMA1 antibody, 4G2dc1, known to inhibit P. falciparum invasion of erythrocytes. The most reactive peptides, J1, J3, and J7, elicited antibody responses in rabbits that recognized the peptide immunogen and both recombinant and parasite AMA1. Human antibodies in plasma samples from individuals exposed to chronic malaria reacted with J1 and J7 peptides and were isolated using immobilized peptide immunoadsorbents. Both rabbit and human antibodies specific for J1 and J7 peptides were able to inhibit the invasion of erythrocytes by P. falciparum merozoites. This is the first example of phage-derived peptides that mimic an important epitope of a blood-stage malaria vaccine candidate, inducing and isolating functional protective antibodies. Our data support the use of J1 and J7 peptide mimics as in vitro correlates of protective immunity in future AMA1 vaccine trials.

High-throughput approaches to catalyst discovery.

High-throughput synthesis and screening approaches to catalyst discovery and optimization are systematically changing the way in which catalyst research is conducted. Increased rates of innovation, cost effectiveness, improved intellectual property, reduced time to market and an improved probability of success are some of the attractive features that demand consideration. Advances made over the past few years reveal that any initial skepticism is waning, and high-throughput approaches to catalyst discovery are now being implemented broadly in industrial and academic laboratories.

A fully integrated high-throughput screening methodology for the discovery of new polyolefin catalysts: discovery of a new class of high temperature single-site group (IV) copolymerization catalysts.

For the first time, new catalysts for olefin polymerization have been discovered through the application of fully integrated high-throughput primary and secondary screening techniques supported by rapid polymer characterization methods. Microscale 1-octene primary screening polymerization experiments combining arrays of ligands with reactive metal complexes M(CH(2)Ph)(4) (M = Zr, Hf) and multiple activation conditions represent a new high-throughput technique for discovering novel group (IV) polymerization catalysts. The primary screening methods described here have been validated using a commercially relevant polyolefin catalyst, and implemented rapidly to discover the new amide-ether based hafnium catalyst [eta(2)-(N,O)[bond](2-MeO[bond]C(6)H(4))(2,4,6-Me(3)C(6)H(2))N]Hf(CH(2)Ph)(3) (1), which is capable of polymerizing 1-octene to high conversion. The molecular structure of 1 has been determined by X-ray diffraction. Larger scale secondary screening experiments performed on a focused 96-member amine-ether library demonstrated the versatile high temperature ethylene-1-octene copolymerization capabilities of this catalyst class, and led to significant performance improvements over the initial primary screening discovery. Conventional one gallon batch reactor copolymerizations performed using selected amide-ether hafnium compounds confirmed the performance features of this new catalyst class, serving to fully validate the experimental results from the high-throughput approaches described herein.

Triple tandem catalyst mixtures for the synthesis of polyethylenes with varying structures.

Tandem catalysis in a single medium presents challenges and opportunities for creating novel synthetic protocols. Thus far, only two homogeneous catalysts have been used in tandem. Herein, we report that it is possible to coordinate the action of three well-defined homogeneous catalysts to produce a wide range of branched polyethylenes from a single monomer. Thus, ([(eta(5)-C(5)Me(4))SiMe(2)(eta(1)-NCMe(3))]TiMe)(MeB(C(6)F(5))(3)) (1), [(C(6)H(5))(2)PC(6)H(4)C(OB(C(6)F(5))(3))O-kappa(2)P,O]Ni(eta(3)-CH(2)C(6)H(5)) (2), and ((H(3)C)C[N(C(6)H(5))]C[O-B(C(6)F(5))(3)][N(C(6)H(5))]-kappa(2)N,N)Ni(eta(3)-CH(2)C(6)H(5)) (3) react with ethylene to produce branched polyethylene with structures that cannot be obtained using a single- or a two-component catalyst combination. The properties of the polyethylene depend on the ratio of the three catalysts. High-throughput screening techniques proved essential for optimizing reaction conditions and for probing how the catalyst composition influences the polymer properties.

High-throughput approaches for the discovery and optimization of new olefin polymerization catalysts.

The discovery of new olefin polymerization catalysts is currently a time-intensive trial-and-error process with no guarantee of success. A fully integrated high-throughput screening workflow for the discovery of new catalysts for polyolefin production has been implemented at Symyx Technologies. The workflow includes the design of the metal-ligand libraries using custom-made computer software, automated delivery of metal precursors and ligands into the reactors using a liquid-handling robot, and a rapid primary screen that serves to assess the potential of each metalligand-activator combination as an olefin polymerization catalyst. "Hits" from the primary screen are subjected to secondary screens using a 48-cell parallel polymerization reactor. Individual polymerization reactions are monitored in real time under conditions that provide meaningful information about the performance capabilities of each catalyst. Rapid polymer characterization techniques support the primary and secondary screens. We have discovered many new and interesting catalyst classes using this technology.

Solid-Phase Synthesis and Encoding Strategies for Olefin Polymerization Catalyst Libraries.

Active polymerization catalysts, novel resin-bound diimine complexes of nickel(II) and palladium(II) are obtained by combinatorial synthesis and combined in a catalyst library. By tagging with fluorescent markers, the catalysts can be coded. Therefore, after cleavage of the tag from the polymer-coated resin, HPLC can be used to determine the pathway along which the products were formed.