RESUMO
Inversion of the left atrial appendage is a rare phenomenon, which may occur during the de-airing maneuvers associated to routinely performed surgery procedures, such as cardiopulmonary bypass or left ventricular assist device implantation. In this case, the body of the inverted appendage can obstruct the mitral valve leading to severe complications. The mechanisms are still poorly known, and more specific studies are needed to better understand its causes and identify mitigating strategies. The current study attempts to gain a better comprehension of the conditions and the factors favourable to left atrial appendage inversion. Four patient specific appendage morphologies, obtained from computerised tomography and representative of the main typologies commonly used for the appendage classification (chicken wing, cactus, cauliflower, and windsock), were used for the study. The numerical models were subjected to the same loading pattern, made of subsequent different pressure curves. Results show that the morphologies invert and recover their original anatomical configuration at different pressure loads, indicating that their tendency to invert is associated to their specific morphological features. Moreover, the analysis highlights that, although restoring the physiological left atrium pressure is not sufficient to induce appendage recovery, pressures well below the ventricular ones can induce the return to the natural configuration. All models recovered the anatomical configuration at pressures well below the ventricular pressure (about 100 mmHg), suggesting that basic trans-catheter maneuvers, e.g. producing temporary mitral regurgitation, could be attempted to correct the appendage configuration, prior to opt for more invasive surgical approaches.
RESUMO
BACKGROUND: Complications of atrial fibrillation (AF) include ischemic events originating within the left atrial appendage (LAA), a protrusion of the left atrium with variable morphological characteristics. The role of the patient specific morphology and pathological haemodynamics on the risk of ischemia remains unclear. METHODS: This work performs a comparative assessment of the hemodynamic parameters among patient-specific LAA morphologies through fluid-structure interaction computational analyses. Three LAA models per each of the four commons patient-specific morphological families (chicken wing, cactus, windsock, and cauliflower) were analysed. Mechanical properties of the tissue were based on experimental uniaxial tests on a young pig's heart. Boundary conditions were imposed based on clinical assessments of filling and emptying volumes. Sinus rhythm and atrial fibrillation operative conditions were simulated and analysed. RESULTS: For each model, the effect of morphological and functional parameters, such as the number of trabeculae and LAA stroke volume, over the hemodynamics established into the appendage was analysed. Comparison between results obtained in healthy and diseased conditions suggested the introduction of a new parameter to quantify the risk of thrombosis, here called blood stasis factor (BSF). This is defined as the LAA surface area which permanently experiences levels of shear strain rate inferior to a threshold value, set to 5 s-1 (BSF5). CONCLUSIONS: This work suggests that the current morphological classification is unsuitable to evaluate the probability of thrombus formation. However, hemodynamic parameters easy to determine from clinical examinations, such as normalised stroke volume, LAA orifice flow rate and presence of extensive trabeculations can identify departures from healthy hemodynamics in AF and support a more systematic stratification of the thromboembolic risk.
Assuntos
Apêndice Atrial , Fibrilação Atrial , Humanos , Apêndice Atrial/patologia , HemodinâmicaRESUMO
Background: A large majority of thrombi causing ischemic complications under atrial fibrillation (AF) originate in the left atrial appendage (LAA), an anatomical structure departing from the left atrium, characterized by a large morphological variability between individuals. This work analyses the hemodynamics simulated for different patient-specific models of LAA by means of computational fluid-structure interaction studies, modeling the effect of the changes in contractility and shape resulting from AF. Methods: Three operating conditions were analyzed: sinus rhythm, acute atrial fibrillation, and chronic atrial fibrillation. These were simulated on four patient-specific LAA morphologies, each associated with one of the main morphological variants identified from the common classification: chicken wing, cactus, windsock, and cauliflower. Active contractility of the wall muscle was calibrated on the basis of clinical evaluations of the filling and emptying volumes, and boundary conditions were imposed on the fluid to replicate physiological and pathological atrial pressures, typical of the various operating conditions. Results: The LAA volume and shear strain rates were analyzed over time and space for the different models. Globally, under AF conditions, all models were well aligned in terms of shear strain rate values and predicted levels of risk. Regions of low shear rate, typically associated with a higher risk of a clot, appeared to be promoted by sudden bends and focused at the trabecule and the lobes. These become substantially more pronounced and extended with AF, especially under acute conditions. Conclusion: This work clarifies the role of active and passive contraction on the healthy hemodynamics in the LAA, analyzing the hemodynamic effect of AF that promotes clot formation. The study indicates that local LAA topological features are more directly associated with a thromboembolic risk than the global shape of the appendage, suggesting that more effective classification criteria should be identified.
RESUMO
Atrial fibrillation (AF) is a common arrhythmia mainly affecting the elderly population, which can lead to serious complications such as stroke, ischaemic attack and vascular dementia. These problems are caused by thrombi which mostly originate in the left atrial appendage (LAA), a small muscular sac protruding from left atrium. The abnormal heart rhythm associated with AF results in alterations in the heart muscle contractions and in some reshaping of the cardiac chambers. This study aims to verify if and how these physiological changes can establish hemodynamic conditions in the LAA promoting thrombus formation, by means of computational fluid dynamic (CFD) analyses. In particular, sinus and fibrillation contractility was replicated by applying wall velocity/motion to models based on healthy and dilated idealized shapes of the left atrium with a common LAA morphology. The models were analyzed and compared in terms of shear strain rate (SSR) and vorticity, which are hemodynamic parameters directly associated with thrombogenicity. The study clearly indicates that the alterations in contractility and morphology associated with AF pathologies play a primary role in establishing hemodynamic conditions which promote higher incidence of ischaemic events, consistently with the clinical evidence. In particular, in the analyzed models, the impairment in contractility determined a decrease in SSR of about 50%, whilst the chamber pathological dilatation contributed to a 30% reduction, indicating increased risk of clot formation. The equivalent rigid wall model was characterized by SSR values about one order of magnitude smaller than in the contractile models, and substantially different vortical behavior, suggesting that analyses based on rigid chambers, although common in the literature, are inadequate to provide realistic results on the LAA hemodynamics.
RESUMO
The electrical equivalent circuit for a neuron is composed of common electrical components in a configuration that replicates the passive electrical properties and behaviors of the neural membrane. It is a powerful tool used to derive such fundamental neurophysiological equations as the Hodgkin-Huxley equations, and it is also the basis for well-known exercises that help students to model the passive (Ohmic) properties of the neuronal membrane. Unfortunately, as these exercises require basic knowledge of electronics, they are generally not physically conducted in biomedical courses, but remain merely conceptual exercises in a book or simulations on a computer. In such manifestations, they lack the "hands-on" appeal for students and teachers afforded by laboratory experimentations. Here, we propose a new approach to these experiments in which a desktop 3D printer and conductive paint are used to build the circuit and the popular programmable microcontroller, the Arduino UNO, is used as a graphical oscilloscope when connected to a standard computer. This set-up has the advantage of being very easy to build and less clumsy than a circuit in a prototyping board or connected with alligator clips, with the added benefit of being conveniently portable for classroom demonstrations. Most importantly, this method allows the monitoring of real-time changes in the current flowing through the circuit by means of a graphical display (by way of the Arduino) at a fraction of the cost of commercially available oscilloscopes.