Manipulable Metal Catalyst for Nanographene Synthesis.

Performing bottom-up synthesis by using molecules adsorbed on a surface is an effective method to yield functional polycyclic aromatic hydrocarbons (PAHs) and nanocarbon materials. The intramolecular cyclodehydrogenation of hydrocarbons is a critical process in this synthesis; however, thus far, its elementary steps have not been elucidated thoroughly. In this study, we utilize the metal tip of a low-temperature noncontact atomic force microscope as a manipulable metal surface to locally activate dehydrogenation for PAH-forming cyclodehydrogenation. This method leads to the dissociation of a H atom of an intermediate to yield the cyclodehydrogenated product in a target-selective and reproducible manner. We demonstrate the metal-tip-catalyzed dehydrogenation for both benzenoid and nonbenzonoid PAHs, suggesting its universal applicability as a catalyst for nanographene synthesis.

Bottom-Up On-Surface Synthesis of Two-Dimensional Graphene Nanoribbon Networks and Their Thermoelectric Properties.

Graphene, the one-atom-thick two-dimensional (2D) carbon material, has attracted tremendous interest in both academia and industry due to its outstanding electrical, mechanical, and thermal properties. For electronic applications, the challenging task is to make it as a semiconductor. The bottom-up synthesis of semiconducting one-dimensional (1D) nanometer-wide graphene strips, namely, graphene nanoribbons (GNRs), has attracted much attention owing to its promising electronic, optical, and magnetic properties. In this regard, we report the fabrication of cove-type 2D GNR networks (GNNs) via the interconnection of 1D self-assembled GNRs on the surface of Au(111). The cove-type 2D GNRs networks (GNNs) were fabricated from the GNR, 5-CGNR-1-1, synthesized using the precursor of DBSP. Annealing of high-density self-assembled GNRs on the surface of Au(111) through two-zone chemical vapour deposition (2Z CVD) successfully generated a 2D interconnected structure with high yield via the fusion and ladder coupling reactions of GNR chains. In order to validate the later fusion reaction, we have also synthesized the GNR, 7-AGNR-1-1, using the precursor of DBBA. The GNNs, which consist of hybridized metallic-like and semiconducting GNRs, are a new class of carbon-based materials. Further, we applied this material for thermoelectric (TE) applications and found a very low cross-plane thermal conductivity of 0.11 Wm-1 K-1 , which is one of the lowest value among the carbon-based materials as well as inorganic semiconductors, while maintaining the cross-plane electrical conductivity of 188 S m-1 .

Benzene-fused bis(acenaphthoBODIPY)s, stable near-infrared-selective dyes.

Benzene-fused bis(acenaphthoBODIPY)s prepared by retro-Diels-Alder reaction of bicyclo[2.2.2]octadiene-fused precursors showed strong absorption bands in the near-infrared region and very weak absorptions in the visible region.

Orientation and Electronic Structures of Multilayered Graphene Nanoribbons Produced by Two-Zone Chemical Vapor Deposition.

The orientation and electronic structure of multilayered graphene nanoribbons with an armchair-edge (AGNRs) were determined by low-temperature scanning tunneling microscopy in this study. The orientation of AGNRs was found to be an edge-on structure when positioned as a top layer, while previous reports showed a face-on structure for monolayered AGNRs on Au(111). According to density functional theory calculations, AGNRs in a top layer preferentially form as edge-on structures rather than face-on structures due to the balance of CH-π and π-π interactions between AGNRs. Scanning tunneling spectroscopy and density functional theory calculations revealed that the electronic structures of multilayered AGNRs are similar to those in a gas-phase due to the lack of interaction between AGNRs and the Au(111) substrate. The observation of AGNRs in mutilayers might suggest the conformation-assisted mechanism of dehydrogenation when there is no contact with the Au(111) substrate.

Strain-induced skeletal rearrangement of a polycyclic aromatic hydrocarbon on a copper surface.

Controlling the structural deformation of organic molecules can drive unique reactions that cannot be induced only by thermal, optical or electrochemical procedures. However, in conventional organic synthesis, including mechanochemical procedures, it is difficult to control skeletal rearrangement in polycyclic aromatic hydrocarbons (PAHs). Here, we demonstrate a reaction scheme for the skeletal rearrangement of PAHs on a metal surface using high-resolution noncontact atomic force microscopy. By a combination of organic synthesis and on-surface cyclodehydrogenation, we produce a well-designed PAH-diazuleno[1,2,3-cd:1',2',3'-fg]pyrene-adsorbed flatly onto Cu(001), in which two azuleno moieties are highly strained by their mutual proximity. This local strain drives the rearrangement of one of the azuleno moieties into a fulvaleno moiety, which has never been reported so far. Our proposed thermally driven, strain-induced synthesis on surfaces will pave the way for the production of a new class of nanocarbon materials that conventional synthetic techniques cannot attain.

Wide graphene nanoribbons produced by interchain fusion of poly(p-phenylene) via two-zone chemical vapor deposition.

Wide graphene nanoribbons (GNRs) were fabricated via two-zone chemical vapor deposition using 4,4''-dibromo-p-terphenyl as the precursor. Densely packed arrays of poly(p-phenylene) produced on Au(111) using this method could be converted into wide GNRs via interchain fusion by thermal annealing. The field-effect transistor prepared from these GNRs exhibited an excellent on/off current ratio of 1.6 ± 0.6 × 103.

Homochiral polymerization-driven selective growth of graphene nanoribbons.

The surface-assisted bottom-up fabrication of graphene nanoribbons (GNRs), which consists of the radical polymerization of precursors followed by dehydrogenation, has attracted attention because of the method's ability to control the edges and widths of the resulting ribbon. Although these reactions on a metal surface are believed to be catalytic, the mechanism has remained unknown. Here, we demonstrate 'conformation-controlled surface catalysis': the two-zone chemical vapour deposition of a 'Z-bar-linkage' precursor, which represents two terphenyl units linked in a 'Z' shape, results in the efficient formation of acene-type GNRs with a width of 1.45 nm through optimized cascade reactions. These precursors exhibit flexibility that allows them to adopt chiral conformations with height asymmetry on a Au(111) surface, which enables the production of self-assembled homochiral polymers in a chain with a planar conformation, followed by dehydrogenation via a conformation-controlled mechanism. This is conceptually analogous to enzymatic catalysis and will be useful for the fabrication of new nanocarbon materials.

Template Synthesis of Decaphyrin without Meso-Bridges: Cyclo[10]pyrrole.

An acenaphthylene-fused cyclo[10]pyrrole 1b was selectively synthesized via an oxidative coupling reaction of the corresponding 2,2'-bipyrrole with the appropriate dianion template, croconate anion. The structure of 1b as the isolated largest cyclo[n]pyrrole was elucidated by X-ray crystallographic analysis. The absorption spectrum exhibited a markedly red-shifted, intensified L band at 1982 nm, which was interpreted by application of Michl's perimeter and Gouterman's 4-orbital models, supported by magnetic circular dichroism (MCD) data and theoretical calculations.

Width-controlled sub-nanometer graphene nanoribbon films synthesized by radical-polymerized chemical vapor deposition.

Radical-polymerized chemical vapor deposition, a new bottom-up method, was developed to produce graphene nanoribbons (GNRs) efficiently, despite the use of extremely low vacuum. Using this technique, a systematic synthesis of a multilayered high-density array of width-controlled sub-1 nm GNRs on a metal surface, with width-dependent band gap, is made possible. GNR films transferred onto insulating substrates behave as an excellent photoconductor.

Yellow NIR dye: π-fused bisbenzoBODIPYs with electron-withdrawing groups.

Bicyclo[2.2.2]octadiene-fused (BCOD-fused) bis(benzoborondipyrromethene)s (bisbenzoBODIPYs) bearing electron-withdrawing groups such as fluorine and cyano groups were prepared either by incorporating tetrafluoroisoindole moieties into BODIPY chromophores or by introducing cyano or ethoxycarbonyl groups at the 3,5-positions. The BCOD-fused bisbenzoBODIPYs were quantitatively converted to the corresponding benzene-fused bisbenzoBODIPYs by a retro-Diels-Alder reaction. The π-fused bisbenzoBODIPYs were found to have intense absorption in the near-infrared region and not to have any strong absorption bands in the visible region. Moreover, the bisbenzoBODIPYs were stable under atmospheric conditions.

Acenaphthylene-fused cyclo[8]pyrroles with intense near-IR-region absorption bands.

An acenaphthylene-fused cyclo[8]pyrrole was synthesized by using an oxidative coupling reaction of the corresponding 2,2'-bipyrrole. Two conformational isomers 1 a and 1 b were isolated, and their molecular structures were elucidated by X-ray crystallographic studies. The less-polar and lower-symmetry 1 b isomer can be converted into the 1 a isomer through a thermal ring flip. Application of the perimeter model developed by Michl to magnetic circular dichroism spectroscopic data and theoretical calculations demonstrate that there is a marked redshift of the near-IR absorption maxima relative to cyclo[8]isoindole because there is a significant stabilization of the LUMO due to the differing effects of a fused ring expansion with acenaphthylene and benzene moieties on the frontier π molecular orbitals.

PET imaging-based evaluation of hepatobiliary transport in humans with (15R)-11C-TIC-Me.

UNLABELLED: It is well accepted that drug transporters play a pivotal role in hepatobiliary excretion of anionic drugs, in which drug-drug interactions and genetic polymorphisms are known to cause variations. However, PET probes for in vivo functional characterization of these transporters have not been established yet. We used PET to investigate hepatic uptake and subsequent canalicular efflux of (11)C-labeled (15R)-16-m-tolyl-17,18,19,20-tetranorisocarbacyclin methyl ester [(15R)-(11)C-TIC-Me)] in healthy subjects. METHODS: Serial PET scans of the abdominal region in healthy male subjects were obtained with or without the organic anion-transporting polypeptide (OATP) inhibitor rifampicin after intravenous injection of (15R)-(11)C-TIC-Me as a radiotracer. Venous blood samples and PET images were obtained at frequent intervals up to 30 min after administration of the PET tracer. Dynamic imaging data were evaluated by integration plots of data collected for 2-10 min and for 10-30 min after tracer administration for the determination of tissue uptake clearance and biliary efflux clearance, respectively. RESULTS: After rapid hydrolysis in blood, the acid form-(11)C-labeled (15R)-16-m-tolyl-17,18,19,20-tetranorisocarbacyclin [(15R)-(11)C-TIC]-accumulated in the liver (37% of the dose by 17 min), and the radioactivity was then excreted into the bile (6.2% by 30 min). Rifampicin (600 mg by mouth), a potent OATP inhibitor, significantly reduced the radioactivity excreted into the bile (by 44%) by inhibiting both uptake (by 45%) and subsequent canalicular efflux (by 62%). (15R)-(11)C-TIC is an in vitro substrate of OATP1B1 and OATP1B3, and clinically relevant concentrations of rifampicin inhibited uptake by OATP1B1 and OATP1B3. These results demonstrated that in humans, (15R)-(11)C-TIC-associated radioactivity is excreted into the bile by organic anion transport systems. CONCLUSION: We demonstrated that PET image analysis with (15R)-(11)C-TIC-Me is useful for investigating variations in OATP function in the human hepatobiliary transport system.

Critical effects of alkyl chain length on fibril structures in benzene-trans(RR)- or (SS)-N,N'-alkanoyl-1,2-diaminocyclohexane gels.

Vibrational circular dichroism (VCD) spectra were recorded on benzene-d(6) gels formed by chiral low molecular mass gelators (LMGs), trans(RR)- or trans(SS)-N,N'-alkanoyl-1,2-diaminocyclohexane (denoted by RR-C(n) or SS-C(n), respectively; n = the number of carbon atoms in an introduced alkanoyl group). Attention was focused on the effects of alkyl chain length on the structures of the gels. When n was changed from 6 to 12, the signs of the coupled peaks around 1550 cm(-1) in the VCD spectra, which were assigned to the symmetric and asymmetric C=O stretching vibrations from the higher to lower wavenumber, respectively, critically depended on the alkyl chain length. In the case of RR-C(n), for example, the signs of the couplet were plus and minus for n = 8, 9, 10 and 12, while the signs of the same couplet were reversed for n = 6 and 7. The conformations of LMGs in fibrils were determined by comparing the observed IR and VCD spectra with those calculated for a monomeric molecule. The observed reversal of signs in the C=O couplet was rationalized in terms of the different modes of hydrogen bonding. In the case of C(8), C(9), C(10) and C(12), gelator molecules were stacked with their cyclohexyl rings in parallel, forming double anti-parallel chains of intermolecular hydrogen bonds using two pairs of >NH and >C=O groups. In case of C(6) and C(7), gelator molecules were stacked through a single chain of intermolecular hydrogen bonds using a pair of >NH and >C=O groups. The remaining pair of >NH and >C=O groups formed an intramolecular hydrogen bond.

Positron emission tomography studies using (15R)-16-m-[11C]tolyl-17,18,19,20-tetranorisocarbacyclin methyl ester for the evaluation of hepatobiliary transport.

A quantitative positron emission tomography (PET) methodology was developed for in vivo kinetic analysis of hepatobiliary transport. Serial abdominal PET scans were performed on normal and multidrug resistance-associated protein 2 (Mrp2)-deficient rats after intravenous injection of (15R)-16-m-[(11)C]tolyl-17,18,19,20-tetranorisocarbacyclin methyl ester (15R-[(11)C] TIC-Me) as a radiotracer. 15R-[(11)C]TIC-Me was rapidly converted to its acid form in blood within 10 s. PET scans revealed that 15R-[(11)C]TIC was localized mainly in the liver within 5 min of injection. By 90 min, total radioactivity in bile of Mrp2-deficient rats was significantly reduced compared with controls. Metabolite analysis by thin-layer chromatography autoradiography showed that 15R-[(11)C]TIC is converted to at least three metabolites (M1, M2, and M3), and M2 and M3 are the major metabolites in plasma and bile, respectively. Hepatic uptake clearance of total radioactivity in normal rats was close to the hepatic blood flow rate and slightly higher than that in Mrp2-deficient rats. The intrinsic canalicular efflux clearance of M3 (CL(int,bile,M3)) in Mrp2-deficient rats was decreased to 12% of controls, whereas clearance of M2 was moderately decreased (54%). An in vitro transport assay detected ATP-dependent uptake of both M2 and M3 by rat Mrp2-expressing membrane vesicles. These results demonstrated that M3 is excreted primarily into the bile by Mrp2 in normal rats. We conclude that PET studies using 15R-[(11)C]TIC-Me could be useful for in vivo analyses of Mrp2-mediated hepatobiliary transport.

Iron and ruthenium nanoparticles in carbon prepared by thermolysis of buckymetallocenes.

Thermolysis of fullerene iron and ruthenium complexes (buckymetallocene M(C(60)R(5))Cp (M = Fe; R = Ph (1) and Me (2), M = Ru; R = Ph (3), Me (4)) under a nitrogen atmosphere produced metal nanoparticles dispersed in carbon materials. The thermal degradation processes of the buckymetallocenes were studied by TG-DTA, TEM with a heating sample stage, and VT-XRD. Variation of the thermolysis temperature led to a change in the size of the nanoparticles and the morphology of the carbon materials. Thermolysis of buckyferrocene at 700 degrees C gave highly dispersed iron nanoparticles (average diameter of 7.4 nm). After thermal treatment at 900 degrees C, graphite structures such as carbon nanocapsules and carbon nanotubes formed because of the catalytic activity of the iron nanoparticles. Ruthenium nanoparticles prepared from buckyruthenocene were much smaller than the iron counterparts, and did not catalyze the formation of graphite structures. When buckyruthenocene absorbed on silica gel was heated at 500 degrees C under a hydrogen atmosphere, the resulting ruthenium nanoparticles showed high activity in catalytic hydrogenation.

Ruthenium-catalyzed oxidative cyanation of tertiary amines with molecular oxygen or hydrogen peroxide and sodium cyanide: sp3 C-H bond activation and carbon-carbon bond formation.

Ruthenium-catalyzed oxidative cyanation of tertiary amines with molecular oxygen in the presence of sodium cyanide and acetic acid gives the corresponding alpha-aminonitriles, which are highly useful intermediates for organic synthesis. The reaction is the first demonstration of direct sp(3) C-H bond activation alpha to nitrogen followed by carbon-carbon bond formation under aerobic oxidation conditions. The catalytic oxidation seems to proceed by (i) alpha-C-H activation of tertiary amines by the ruthenium catalyst to give an iminium ion/ruthenium hydride intermediate, (ii) reaction with molecular oxygen to give an iminium ion/ruthenium hydroperoxide, (iii) reaction with HCN to give the alpha-aminonitrile product, H2O2, and Ru species, (iv) generation of oxoruthenium species from the reaction of Ru species with H2O2, and (v) reaction of oxoruthenium species with tertiary amines to give alpha-aminonitriles. On the basis of the last two pathways, a new type of ruthenium-catalyzed oxidative cyanation of tertiary amines with H2O2 to give alpha-aminonitriles was established. The alpha-aminonitriles thus obtained can be readily converted to alpha-amino acids, diamines, and various nitrogen-containing heterocyclic compounds.

Photocurrent-generating properties of organometallic fullerene molecules on an electrode.

Compact, rigid, five-legged fullerene derivatives C60R5Me and M(C60R5)Cp (M = Fe and Ru; R = C6H4COOH, C6H4C6H4COOH, and CH2COOH) were synthesized and arrayed on an indium-tin oxide (ITO) surface. These devices exhibit a respectable quantum yield with photocurrent generation up to 18%, and, more importantly, the direction of the photocurrent can be changed not only by the molecular structure itself but also by changing the geometric configuration of the photoactive acceptor (fullerene) and donor (metal atom) on the ITO surface.

Synthesis of C5-symmetric functionalized [60]fullerenes by copper-mediated 5-fold addition of Reformatsky reagents.

A variety of Reformatsky reagents were added five times to [60]fullerene in good yield in the presence of a stoichiometric amount of a copper(I) complex. The penta-addition products C60(CH2CO2R)5H (R=Et, t-Bu, CH2CF3, (CH2CH2O)2Et, and CH2CH2CCSiMe3) can then be converted to the corresponding penta-hapto metal complexes. When the R group is a (-)-menthyl group, the corresponding metal complex comprises an organometallic complex with a coordination sphere consisting of a homochiral C5-symmetric environment.

Water-soluble diruthenium complexes bearing acetate and carbonate bridges: highly efficient catalysts for aerobic oxidation of alcohols in water.

The aerobic oxidation of alcohols in water can be performed efficiently in the presence of a catalytic amount of the water-soluble diruthenium complex Ru2(micro-OAc)3(micro-CO3) under an atmospheric pressure (1 atm) of O2.

Aerobic ruthenium-catalyzed oxidative cyanation of tertiary amines with sodium cyanide.

RuCl3-catalyzed oxidative cyanation of tertiary amines with sodium cyanide under molecular oxygen (1 atm) at 60 degrees C gives the corresponding alpha-aminonitriles, which are versatile synthetic intermediates of various compounds such as amino acids and unsymmetrical 1,2-diamines, in excellent yields. This reaction is clean and should be an environmentally benign and useful process.