Chromatographic reversed HPLC and TLC-densitometry methods for simultaneous determination of serdexmethylphenidate and dexmethylphenidate in presence of their degradation products-with computational assessment.

Two Chromatographic methods have been established and optimized for simultaneous determination of serdexmethylphenidate (SER.DMP) and dexmethylphenidate (DMP) in the presence of their degradation products. The first method is a reversed phase high performance liquid chromatography with diode array detection (HPLC-DAD). Isocratic separation was carried out on Waters X-bridge Shield RP18 column (150×3.9×5 µm particle size) using a mixture of 5 mM phosphate buffer (pH 5.5): acetonitrile (40:60, v/v) as a mobile phase, flow rate 1 mL/min and detection at 220 nm. The second method is a thin-layer chromatography (TLC)-densitometry method using methanol: chloroform (70:30, v/v) as a mobile phase and UV scanning at 220 nm. In HPLC method, the linearity range of SER.DMP was (2.5-25 µg/mL); with LOD (0.051 µg/mL) and LOQ (0.165 µg/mL) while for DMP was (2.5-25 µg/mL); with LOD and LOQ of (0.098 µg/mL) and (0.186 µg/mL), respectively. For TLC method the sensitivity range of SER.DMP was (5-25 µg/mL), LOD was (0.184 µg/spot), while LOQ was (0.202 µg/ spot) whereas for DMP the sensitivity range was (5-25 µg/mL) with LOD of (0.115 µg/ spot) and LOQ of (0.237 µg/ spot), respectively. SER.DMP was found to be equally labile to acidic and alkaline hydrolysis, whereas DMP was sensitive to acidic hydrolysis only. Both drugs were successfully determined in presence of acidic and basic degradants by the two developed methods (stability indicating assay method). Chromatographic separation of the degradation products was carried out on TLC aluminum silica plates 60 F254, as a stationary phase, using methanol: dichloroethane: acetonitrile (60:20:20 v/v), as a mobile phase. The degradation pathway was confirmed using TLC, IR, 1H-NMR and mass spectroscopy; moreover, the separation power was correlated to the computational results by applying molecular dynamic simulation. The developed methods were validated according to the International Conference on Harmonization (ICH) guidelines demonstrating good accuracy and precision. They were successfully applied for quantitation of SER.DMP and DMP in pure and capsule forms. The results were statistically compared with those obtained by the reported method in terms of accuracy, precision and robustness, and no significant difference was found.

Cross-sectional analysis of Piroplasma species-infecting camel (Camelus dromedaries) in Egypt using a multipronged molecular diagnostic approach.

Camel piroplasmosis is a tick-borne disease (TBD) caused by hemoprotozoan parasites. Hereby, we describe a cross-sectional study aiming at identifying Piroplasma spp.-infecting camels in Egypt using a multipronged molecular diagnostic approach. A total of 531 blood samples from camels (Camelus dromedarius) were collected from slaughterhouses at different governorates in Egypt for analysis during the period from June 2018 to May 2019. Piroplasma spp. was identified using microscopical examination and several different and sequential polymerase chain reaction (PCR) assays targeting the 18S rRNA genes. The overall prevalence of Piroplasma spp. in microscopical and molecular analyses in the samples was 11% (58/531) and 38% (203/531), respectively. Further discriminative multiplex PCR analysis targeting the 18S rRNA gene applied on all Piroplasma spp.-positive samples allowed the detection of Theileria equi (41%), Babesia caballi (5.4%), Babesia bigemina (0.5%), and Babesia bovis (4%). Additionally, the blast analysis of nested (n) PCR, targeting the V4 region, amplicon sequences resulted in the identification of B. vulpes (22%), Babesia sp. (9%), and Theileria sp. (3%). Overall, the results of this study confirmed the high prevalence of TBDs caused by several types of piroplasm hemoparasites in camel and suggests the need for future interventions aimed at improving the control of these potentially debilitating diseases that may be t-hreatening important economic resources and food security in Egypt.

Comparative study of extension area based methods for spectrophotometric determination of desmopressin acetate in the presence of its acid-induced degradation products.

Desmopressin acetate (DPA) is a synthetic analogue of vasopressin used in the treatment of diabetes insipidus, bedwetting, hemophilia A, and elevated levels of urea in the blood. Sensitive and selective stability-indicating methods are needed to be developed and validated for its assay pure and pharmaceutical dosage forms in the presence of its degradation products as no method has been reported for its determination in the presence of its degradants. This work describes a comparative study of five simple stability-indicating spectrophotometric techniques for determination of DPA in presence of its acid-degradation products (acid-degradants) without prior separation. The proposed spectrophotometric techniques (First derivative, Derivative ratio, Ratio difference, Mean centering and Dual wavelength) were developed and validated according to ICH guidelines. Acid degradation was carried out with 0.1 N HCl; the acid-degradants were separated on TLC plates and the acidic degradation pathway was established by IR, H-NMR and MS techniques. The TLC method was based on the separation of DPA and its acid-induced degradation products on silica gel plates using methanol: water (80:20, v/v) as a developing system and UV detection at 254 nm. All assay suggested methods were successfully applied for quantitation of DPA in pure and tablet forms. They are specific, sensitive, precise and accurate. They showed good linearity in the concentration range of 1-14 µg/mL with good correlation coefficients, and limit of detection (LOD) of 0.304, 0.274, 0.167, 0.248 and 0.199 and limit of quantitation (LOQ) of 0.920, 0.829, 0.506, 0.751 and 0.604) for each method, respectively. These methods were successfully applied for the simultaneous determination of DPA in its pure and tablet dosage form in the presence of its acid-degradants. The results obtained were statistically comparable with those of reported HPLC assay method; no significant differences were observed with relevance to accuracy and precision. All the methods are sensitive, selective and can be used for the routine analysis of DPA in its pure and dosage forms.

Electrochemical determination of dinitolmide in poultry product samples using a highly sensitive Mn2O3/MCNTs-NPs carbon paste electrode aided by greenness assessment tools.

In this paper, chemically modified carbon paste Mn2O3/MCNTs-NPs electrode for estimation of dinitolmide (DOM) utilizing square wave voltammetry method (SWV) was developed. The study investigated the electrochemical behavior of DOM, and the morphology of the modified electrode was evaluated by Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM). The voltammetric behavior of DOM at modified electrode was recorded at a scan rate of 100 mVs-1 against Ag/AgCl reference electrode in phosphate buffer pH 4.0 within linearity range 2-12 µM, LOQ, and LOD of 1.8 and 0.594 µM, respectively, with average % recovery of (100.89 ± 0.795). GAPI and Analytical Eco-Scale tools were applied for greenness assessment. Specificity and interference study was valid for the proposed method; allowing DOM to be determined in its acidic degradation and its major interference drug. The proposed method was successfully employed to quantify DOM in bulk powder, egg, and frozen cuts-up chicken muscle samples.

Rapid Detection of Equine Piroplasms Using Multiplex PCR and First Genetic Characterization of Theileria haneyi in Egypt.

Equine Piroplasmosis (EP) is an infectious disease caused by the hemoprotozoan parasites Theileria equi, Babesia caballi, and the recently identified species T. haneyi. Hereby, we used a multiplex PCR (mPCR) targeting the 18S rRNA gene of T. equi and B. caballi for the simultaneous detection of EP in Egyptian equids and examined the presence of T. haneyi infections in Egypt. Blood samples from 155 equids (79 horses and 76 donkeys) collected from different governorates of Egypt were examined by mPCR and PCR targeting T. hayeni. The mPCR method revealed a prevalence of T. equi of 20.3% in horses and of 13.1% in donkeys and a prevalence of B. caballi of 1.2% in horses. B. caballi was not detected in donkeys in the current study. The mPCR method also detected coinfections with both species (2.5% and 1.3% in horses and donkeys, respectively). Additionally, we report the presence of T. haneyi in Egypt for the first time in 53.1% of the horse and 38.1% of the donkey tested samples. Coinfection with T. haneyi and T. equi was found in 13.5% of the samples, while infection with the three EP species was found in 1.9% of the samples.

Immobilization of chitosan nanolayers on the surface of nano-titanium oxide as a novel nanocomposite for efficient removal of La(III) from water.

A novel nanocomposite has been designed and synthesized via surface crosslinking of chitosan nanolayers (NChit) with titanium oxide nanoparticles (NTiO2) using glutaraldehyde (Glu) as the crosslinking agent. A simple and green surface chemical reaction was accomplished by the aid of microwave heating process to enforce surface encapsulation and functionalization for the production of the aimed NTiO2-Glu-NChit nanocomposite. The average particles size of nanocomposite was characterized in the range of 52-58nm using SEM and confirmed by the HR-TEM. The XRD, TGA and FTIR were also employed to assure the immobilization and crosslinking processes. NTiO2-Glu-NChit was studied to estimate the sorption efficiency towards La(III) from aqueous solution by the batch technique under different experimental controlling physicochemical parameters such as, initial pH of metal ion solution, contact time, nanocomposite dosage and initial metal ion concentration. The optimum sorption condition for La(III) as the target metal ion was identified at pH=1.0, 3.0 and 6.0. The adsorption process of La(III) was characterized to follow the postulates of Langmuir and Freundlich isotherm models and the adsorption mechanisms were identified to obey the pseudo-second order kinetic model based on the best compatible results with the experimental data.

Biogenic amines in chicken meat products in relation to bacterial load, pH value and sodium chloride content.

Exogenous biogenic amines may present food poisoning hazards, especially when coupled with additional risk factors. In recent years, consumption of poultry meat and poultry meat products has increased. Therefore, the goals of this work were to estimate biogenic amines in chicken meat products and to find a correlation to bacterial quality, pH value and/or NaCl content. A total number of 60 random samples of chicken frankfurter, luncheon and keshta were collected from Cairo and Assiut supermarkets and groceries. The samples were analyzed for estimation of histamine, tyramine, cadaverine and puerscine. The results were in low levels and varied in each product. The bacterial quality was evaluated with respect to total colony, Enterobacteriaceae, coliforms, Lactobacillaceae and Pseudomonas aeruginosa counts. These amineproducering bacteria were detected in low amounts. Such findings as well as pH value and NaCl content correlated with amines levels.