Survivorship and Outcomes of 2-Stage Revision for Infected Total Hip Arthroplasty at a Mean of 7-Year Follow-Up.

BACKGROUND: Periprosthetic joint infection (PJI) continues to be one of the leading causes of failure following total hip arthroplasty (THA). The objectives of the study were to (1) determine the minimum 2-year infection-free survivorship of 2-stage revision THA, (2) determine the causative organisms for repeat 2-stage revision THA, and (3) characterize the results of failed 2-stage revisions and evaluate patient-reported outcome measures (PROMs). METHODS: A retrospective chart review was completed for patients who underwent 2-stage revision THA for PJI. Prospective data were collected on each patient, including demographics, causative organisms, complications, and type of reoperation. The PROMs, including Harris Hip Score, 12-item Short-Form Health Survey, and Western Ontario and McMaster Universities Osteoarthritis Index scores were obtained prior to 2-stage revision THA surgery and annually as part of standard clinical and radiographic follow-up. RESULTS: A total of 328 patients who underwent a 2-stage revision THA for a PJI were included in the study (mean age 67 years [range, 28 to 90], mean body mass index of 30.6 [range, 15 to 57]). The overall infection-free survivorship for 2-stage revision THA was 73.8% at a minimum of 2 years (range, 2 to 20). Overall, 194 (59.1%) patients who had successful infection eradication underwent a 2-revision THA only. The most common single organisms infected were Staphylococcus aureus (12.5%) and Staphylococcus epidermidis (11%). Higher reoperation rates were found in cases with methicillin-resistant Staphylococcus aureus and polymicrobial infections. All PROMs showed statistical improvement from preoperatively to the latest follow-up appointment. CONCLUSIONS: Two-stage revision THA is associated with a good success rate in the treatment of PJIs at mid-term to long-term follow-up. Polymicrobial and methicillin-resistant Staphylococcus aureus infections are poor prognostic factors, making the eradication of infection more difficult. The management of PJIs continues to be one of the most important orthopaedic challenges to treat.

Minimum 15-Year Survival of a Biconvex Inlay Patellar Component in Primary Total Knee Arthroplasty: An Analysis of 2,530 Total Knee Arthroplasties From a Single Institution.

BACKGROUND: Routine patellar resurfacing during primary total knee arthroplasty (TKA) remains controversial. To our knowledge, there are no studies reporting the long-term performance of a cemented biconvex all-polyethylene inlay component implanted at the time of primary TKA. The purpose of this study was to examine the 15-year survivorship and long-term clinical outcomes of this biconvex inlay patella used at our institution. METHODS: We retrospectively reviewed our prospectively collected institutional database and identified 2,530 patients who underwent cemented TKA with a single prosthetic design (from 1996 to 2007) where the patella was resurfaced using this cemented biconvex inlay patella. The mean age at surgery was 68 years (range, 29 to 93). The mean body mass index was 33.0 (range, 16.4 to 76.3), with 61.9% women. At the time of analysis, the mean time from surgery was 20.4 years (range, 15 to 26). We used Kaplan-Meier analysis to calculate survivorship at 15 years. We analyzed clinical outcomes using 3 patient-reported outcome measures collected prospectively. RESULTS: The 15-year survivorship with revision surgery for all causes as the end point was 97.1% (95% confidence interval 96.1 to 98.1%). The 15-year survivorship with revision surgery for a patella-related complication as the end point was 99.7% (95% confidence interval 99.4 to 1.0). At the final follow-up, patients showed significant improvement in scores for the Knee Society Clinical Rating System (P < .001), Western Ontario and McMaster University Osteoarthritis Index (P < .001), and Veterans Rand 12-Item Health Survey physical component (P < .001). CONCLUSIONS: Routine patellar resurfacing using a biconvex inlay patellar component has excellent survivorship and a low rate of complications at 15 years post-TKA.

Effect of Surgical Technique, Implant Design, and Time of Examination on Contact Kinematics: A Study of Bicruciate-Stabilized and Posterior-Stabilized Total Knee Arthroplasty.

BACKGROUND: Bicruciate-stabilized (BCS) total knee arthroplasty (TKA) designs attempt to approximate natural knee mechanics. Multiple surgical techniques, including gap balancing (GB) and measured resection (MR), have been developed to provide optimal implant positioning and soft-tissue balance. The goal of this study was to determine the effect of surgical technique on BCS TKA contact kinematics. Secondary goals included investigating the change of kinematics over time and comparing BCS TKA kinematics to a posterior-stabilized (PS) design. METHODS: The study included the BCS-GB, BCS-MR, and PS-MR groups. The BCS-GB and BCS-MR groups underwent weight-bearing radiostereometric analysis for multiple knee flexion angles at 3 months and 1 year postoperatively, whereas the PS-MR group was imaged at 1 year postoperatively. The medial and lateral contact kinematics were determined from implant poses. RESULTS: There were no differences in BCS TKA kinematics between the GB and MR techniques. There were differences in the mid-flexion ranges when comparing the 3-month and 1-year kinematics of the BCS design; however, they were less than 1.5 mm. Differences existed between the kinematics of the BCS and PS designs at all flexion angles for the medial condyle (P < .0006) and at 0° of flexion on the lateral condyle (P < .0001). CONCLUSIONS: Contact kinematics for a BCS design were similar for both surgical techniques, suggesting both are appropriate for this design. Small, likely clinically insignificant differences were found between 3-month and 1-year kinematics. The BCS TKA kinematics differed from the PS design; however, it is unclear whether these differences improve clinical outcomes.

Minimum 2-Year Outcomes of a Modern Monoblock Titanium Fluted Tapered Revision Stem for Complex Primary and Revision Total Hip Arthroplasty.

BACKGROUND: Modular titanium fluted tapered (TFT) stems have demonstrated excellent clinical success for femoral revision total hip arthroplasty (THA) surgery. This study reports the short-term outcomes of a novel modern monoblock TFT stem used for revision and complex primary THA with a minimum of 2 years of follow-up. METHODS: We identified 126 patients who received a single monoblock TFT stem: 26 patients for complex THA (failed fracture fixation) and 100 patients for revision THA. The reasons for revision THA included 40 for previous periprosthetic joint infection, 42 for aseptic loosening, 9 for trunnionosis, and 9 for periprosthetic fractures. The Paprosky grading for femoral bone loss at the time of surgery and the measured subsidence of femoral stems at 3-month follow-up were determined. We evaluated the number and indications for reoperations. RESULTS: The mean time from surgery was 3.9 years (range, 2.0 to 6.9). A paired t-test analysis showed significant improvement from preoperative versus postoperative clinical outcome scores (P < .001) for Harris Hip Score (38.76 ± 15.24 versus 83.42 ± 15.38), Western Ontario and McMaster Universities Arthritis Index (45.6 ± 19.0 versus 69.9 ± 21.3), Veterans RAND 12 Item Health Survey Physical component (31.7 ± 8.1 versus 37.8 ± 11.3), and Veterans RAND 12 Item Health Survey Mental component (48.2 ± 12.2 versus 51.6 ± 12.5). The Paprosky grading for femoral bone loss was Grade 1 (3.9%), Grade 2 (35.7%), Grade 3A (47.6%), Grade 3B (11.1%), and Grade 4 (1.6%) cases. There were 18 reoperations (14.7%), with 13 for periprosthetic joint infection (7 treated with implant retention and 6 treated with a 2-stage revision), 4 for instability, and 1 for acetabular aseptic loosening. There were no aseptic failures of the stem. CONCLUSIONS: This novel modern monoblock TFT stem provided reliable femoral fixation and has increasingly supplanted the use of modular TFT stems for complex primary and revision surgery in our institution.

Predictors of Undergoing Revision Within 5 Years of Total Knee Arthroplasty: A Population-Based Study.

BACKGROUND: The objective of this study was to identify the rate and risk factors for revision total knee arthroplasty (TKA) within the first 5 years postoperative. Our secondary objective was to identify the rate of additional surgical procedures and death. METHODS: We conducted a retrospective cohort study among patients in Ontario, Canada who underwent an elective, primary TKA between April 1, 2007, and March 31, 2014, for osteoarthritis. We excluded patients under 40 years and who had undergone a TKA within the previous 15 years. Our final study cohort included 94,193 patients. We reported the proportion of the study cohort who experienced revision surgery within 2 and 5 years of the primary TKA; secondary surgery within 5 years. We conducted Cochran-Armitage tests for trends to assess changes in the proportion of patients who experienced each of the study outcomes, and multivariable logistic regressions to evaluate predictors of a revision TKA. RESULTS: There were 3,112 (3.3%) patients who had a revision within 5 years, and 1,866 (2.0%) within 2 years of their primary TKA. 3,316 (3.5%) had a secondary surgery (0.6% patellar resurfacing; 1.6% manipulation; 1.3% synovectomy; 0.5% washout; 0.9% debridement). Lower age, men, lower income, higher comorbidity score, depression, previous arthroscopy, lower surgeon volume, and general anesthesia were all significant positive predictors of revision. CONCLUSIONS: In our study cohort, 2.0% of patients had a revision TKA within 2 years, and 3.3% within 5 years of their primary TKA. Preoperative identification of risk factors may reduce the future prevalence of revision TKAs.

Minimum 5-Year Clinical Outcomes and Survivorship for a Single Revision Total Knee Arthroplasty System Using Hybrid Fixation and Press-Fit Stems.

BACKGROUND: Hybrid fixation, utilizing diaphyseal press-fit stems and cement fixation in the tibial and femoral metaphyseal areas, has long been a strategy for revision total knee arthroplasty (rTKA). The purpose of this study was to evaluate the clinical outcomes and survivorships of hybrid fixation using a single rTKA revision system with a minimum of 5 years follow-up. METHODS: We reviewed our prospectively collected database to identify 281 patients who underwent rTKA using a single revision system with hybrid fixation and press-fit stems between July 2006 and August 2016. We reviewed the clinical outcome scores, including the Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis index, and Veterans RAND 12 Item Health Survey. We also evaluated the 5 and 10-year survivorships and the indications for reoperations. The cohort had a mean age of 70 years (range, 45.2 to 92.0) and a mean body mass index of 33.4 (range, 17.3 to 55.8). The mean time from rTKA surgery was 11.1 years (range, 5.3 to 15.5). RESULTS: Paired t-test analyses showed significant improvements from preoperative versus postoperative clinical outcome scores (P < .001) for Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis, and Veterans RAND 12 Item Health Survey Physical component. Prosthetic joint infections after index rTKA were the most common failure mode with 29 patients requiring reoperations. Rerevision due to aseptic loosening was uncommon (6 patients) with a cumulative survival rate of 95.2% at 5 years and 94.2% at 10 years. CONCLUSION: The use of this single rTKA system utilizing press fit stems combined with hybrid fixation provided significant improvements in the clinical outcomes and excellent survivorships at 5 and 10 years.

No Difference in Subsidence Between Modern Monoblock and Modular Titanium Fluted Tapered Femoral Stems.

BACKGROUND: Subsidence remains a concern when utilizing tapered fluted titanium (TFT) femoral stems and may lead to leg length discrepancy, impingement, instability, and failure to obtain osseointegration. This study aims to compare stem subsidence across 3 modern TFT stems. Our secondary aim was to investigate the influence of bicortical contact or "scratch fit" on subsidence, as well as the role of intraoperative imaging in maximizing bicortical contact and preventing stem subsidence. METHODS: A retrospective review of 271 hip arthroplasties utilizing modern TFT stems at a single institution was performed. Three stem designs were included in the analysis: 1 monoblock TFT stem (n = 91) and 2 modular TFT stems (n = 90; n = 90). Patient demographics, Paprosky femoral bone loss classification, bicortical contact, utilization of intraoperative imaging, and stem subsidence (comparison of initial postoperative radiograph to the latest follow-up radiograph-minimum 3 months) were recorded. RESULTS: There was no statistically significant difference in overall subsidence (P = .191) or the incidence of subsidence >5 millimeters between stems (P = .126). Subgroup analysis based on femoral bone loss grading showed no difference in subsidence between stems. Increased bicortical contact was associated with reduced subsidence (P = .004). Intraoperative imaging was used in 46.5% (126 of 271) of cases; this was not correlated with bicortical contact (P = .673) or subsidence (P = .521). CONCLUSION: All 3 modern TFT stems were highly successful and associated with low rates of subsidence, regardless of modular or monoblock design. Surgeons should select the stem that they feel is most clinically appropriate.

Correlating Contact Kinematics to Tibial Component Migration Following Cemented Bicruciate Stabilized Total Knee Arthroplasty.

BACKGROUND: Contact kinematics in total knee arthroplasty (TKA) has been shown to affect tibial component migration. However, previous studies correlating kinematic variables to implant migration were completed with older TKA designs. The goal of this study was to determine if there are associations between contact kinematics and tibial component migration for a cemented, bicruciate stabilized (BCS) TKA system. METHODS: A total of 54 knees implanted with a BCS TKA system were analyzed using radiostereometric analysis (RSA). Patients underwent RSA exams at 2 weeks, 6 weeks, 3 months, 6 months, 1 year, and 2 years post operation to measure tibial component migration. At 1 year, contact kinematics was evaluated during a quasi-static deep knee bend. Linear regression analyses were performed between kinematic variables and migration values. RESULTS: Significant correlations were found between contact kinematics and tibial component migration. Excursion on the lateral condyle was the most consistent variable correlating with implant migration. Six patients had > 0.2 mm migrations from 1 to 2 years post operation indicating continuously migrating tibial components, and most had atypical contact kinematics. CONCLUSION: Kinematics was shown to influence tibial component migration. Reduced lateral excursion, suggesting a more constrained lateral condyle, resulted in greater implant migration. The 6 patients who had continuously migrating tibial components had demographic factors that may limit the ability to endure unintended force transmissions caused by abnormal kinematics. These results highlight the importance of restoring knee kinematics with this BCS TKA design to minimize improper force transmissions and resultant increased implant migrations.

Patient and Implant Performance of Satisfied and Dissatisfied Total Knee Arthroplasty Patients.

BACKGROUND: Implant migration and altered kinematics have been thought to impact patient-reported outcome measures (PROMs) and postoperative patient satisfaction. In this study comparing satisfied and dissatisfied total knee arthroplasty (TKA) patients, we hypothesized that dissatisfied patients will have greater continuous implant migration and that there will be differences in joint kinematics, objective functional measurements, and PROMs between satisfied and dissatisfied patients. METHODS: The Knee Society Score Satisfaction Subsection questions regarding satisfaction with function were used at least 6 months postoperation to split 50 patients into satisfied and dissatisfied groups. Patients underwent radiostereometric analysis to evaluate migration and kinematics. A wearable sensor system obtained objective measurements of patient function during timed up and go tests. PROMs were recorded preoperation and postoperation. RESULTS: No statistically significant differences were found in migration between satisfied and dissatisfied groups. Statistical kinematic differences existed in lateral anteroposterior contact location at 20° and 40° of flexion at 1 year, where the dissatisfied group had more anteriorly located lateral contact. No statistically significant differences were present in objective functional measurements. Satisfied and dissatisfied groups had differing PROMs at 4 timepoints or greater for each questionnaire. CONCLUSIONS: No differences were found in tibial component migration or objectively measured function between satisfied and dissatisfied patients. Functionally dissatisfied patients had more anteriorly positioned contact on the lateral condyle in early flexion and reported more pain and unmet expectations. These findings suggest that improving the functional satisfaction of TKA requires restoration of kinematics in early flexion and management of patient's pain and expectations.

The Prevalence and Outcomes of Unexpected Positive Intraoperative Cultures in Presumed Aseptic Revision Knee Arthroplasty.

BACKGROUND: The prevalence and outcomes of unexpected positive intraoperative cultures (UPC) in presumed aseptic revision total knee arthroplasty (TKA) are unclear. The purpose of this study was to determine the prevalence of UPC and infection-free implant survival in this patient population. Secondly, we aimed to compare the infection-free implant survival between cohorts based on number of UPCs and antibiotic treatment. METHODS: We reviewed our institutional database from 2006 to 2019 for all TKA revisions (n = 1795) to identify all presumed aseptic TKA revisions with intraoperative culture(s). After exclusions, 775 revisions were eligible and those with UPC were included in the Kaplan-Meier analysis to determine infection-free implant survival for the cohorts. RESULTS: The prevalence of UPC was 9.8%. The 2- and 5-year infection-free survival was 97.4% and 95.3%, respectively. The 5-year infection-free survival from the same microorganism as the UPC was 98.7%. Infection-free survival was similar for the 1 versus ≥2 UPC cohorts (P = .416), however was poorer for the cohort treated with antibiotics (P = .021). Only one of 3 subsequent PJI-related implant failures was caused by the same microorganism (polymicrobial) as the UPC. There were no subsequent infections in patients with a single UPC not treated with antibiotics. CONCLUSIONS: The prevalence of UPC was 9.8% and the infection-free implant survival is excellent. Infection-free survivorship from PJI caused by the same UPC microorganism is outstanding. Comparisons between cohorts must be interpreted with caution due to study limitations. A single UPC in patents without other signs of infection does not require antibiotic treatment. LEVEL OF EVIDENCE: IV.

Effect of Osteochondroplasty on Time to Reoperation After Arthroscopic Management of Femoroacetabular Impingement: Analysis of a Randomized Controlled Trial.

Background: A subset of patients with femoroacetabular impingement (FAI) fail arthroscopic management. It is not clear which patients will fail surgical management; however, several surgical and patient factors, such as type of procedure and age, are thought to be important predictors. Purpose: This time-to-event analysis with a 27-month follow-up analysis compared the effect of (1) arthroscopic osteochondroplasty with or without labral repair versus (2) arthroscopic lavage with or without labral repair on the time to reoperation in adults aged 18 to 50 years with FAI. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: Eligible participants had been randomized in a previous study trial to a treatment of arthroscopic osteochondroplasty or arthroscopic lavage with or without labral repair. Using the comprehensive data set from the Multinational Femoroacetabular Impingement Randomized controlled Trial, all reoperations until 27 months after surgery were identified. The analysis was conducted using a Cox proportional hazards model, with percentage of patients with a reoperation evaluated in a time-to-event analysis as the outcome. The independent variable was the procedure, with age and impingement subtype explored as potential covariates. The effects from the Cox model were expressed as the hazard ratio (HR). All tests were 2-sided, with an alpha level of .05. Results: A total of 108 patients in the osteochondroplasty group and 106 patients in the lavage group were included. The mean age of the patients included in the study was 36 ± 8.5 years. Overall, 27 incident reoperations were identified within the 27-month follow-up, with an incidence rate of 6 per 100 person-years. Within the osteochondroplasty group, 8 incident reoperations were identified (incidence rate, 3.4 per 100 person-years), while within the lavage group, 19 incident reoperations were identified (incidence rate, 8.7 per 100 person-years). The hazard of reoperation for patients undergoing osteochondroplasty was 40% of that of patients undergoing lavage (HR, 0.40 [95% CI, 0.17-0.91] P = .029). Conclusion: This study demonstrated that for adults between the ages of 18 and 50 years with FAI, arthroscopic osteochondroplasty was associated with a 2.5-fold decrease in the hazard of reoperation at any point in time compared with arthroscopic lavage. Registration: NCT01623843 (ClinicalTrials.gov identifier).

Unit Sales Trends of Hip Arthroplasty Procedures Performed in Ontario in 2020.

BACKGROUND: In March 2020, an emergency was declared in the province of Ontario owing to the COVID-19 pandemic. From March 19 to May 26, all elective total hip arthroplasty (THA) and total knee arthroplasty (TKA) procedures were deferred. The purpose of this study was to review the unit sales data of THA and TKA procedures in Ontario over this time period to identify any trends in surgical activity. METHODS: Unit sales data for all THA and TKA procedures performed in Ontario between January 2019 and December 2020 were reviewed. All orthopedic companies contributed to the data set. Femoral stems were considered an indicator of THA procedures, while primary femurs were considered an indicator of TKA procedures. Data were analyzed to determine trends in THA and TKA procedures during the deferral period and the relative change in THA and TKA activity following resumption. RESULTS: There was a 53% reduction in THA activity between March and May of 2020 when compared to the same interval in 2019. From June to September of 2019, THA sales activity was 87.3% that of TKA. From June to September of 2020, THA sales activity was 122.8% that of TKA. CONCLUSION: Provincial directives aimed at controlling the outbreak of COVID-19 contributed to a substantial reduction in THA and TKA activity in 2020. Compared to 2019, there was a disproportionate increase in THA compared to TKA activity in 2020 following resumption of surgical services. These data have implications in recovery planning for the surgical backlog of THA in Ontario.

A Ten-Year Radiostereometric Analysis of Polyethylene Wear Between Oxidized Zirconium and Cobalt Chrome Articulations in Total Hip Arthroplasty.

BACKGROUND: Oxidized zirconium (OxZi) femoral heads combine the decreased abrasive properties of ceramics with the toughness of metal alloys to lower wear and increase the durability of total hip arthroplasty. The purpose of this study was to compare the 10-year polyethylene wear rates between OxZi/XLPE and cobalt chrome (CoCr)/XLPE articulations. METHODS: A radiostereometric analysis (RSA) was performed on two cohorts of 23 patients who underwent total hip arthroplasty using either OxZi/XLPE or CoCr/XLPE at a minimum of 10-year follow-up. Cohorts were matched for age, gender, body mass index (BMI), and diagnosis. Polyethylene wear was measured using RSA to determine total and steady-state wear rates for both cohorts. Preoperative and postoperative patient-reported outcome measures (SF12, HHS, and Western Ontario and McMaster Universities Arthritis Index scores) were compared. RESULTS: The mean total head penetration rate was found to be statistically different between the entire cohorts (OxZi 0.048 ± 0.021 mm/y, CoCr 0.035 ± 0.017 mm/y, P = .02) but not when 28-mm heads only (OxZi 0.045 ± 0.016 mm/y, CoCr 0.034 ± 0.017 mm/y, P = .066) were directly compared. The mean steady-state wear rate was not significantly different between the entire cohorts (OxZi 0.031 ± 0.021 mm/y, CoCr 0.024 ± 0.019 mm/y, P = .24) or 28-mm head cohorts (OxZi 0.028 ± 0.019 mm/y, CoCr 0.024 ± 0.019 mm/y, P = .574). Outcome measures showed no statistical difference except for the Harris Hip Score where the OxZi cohort demonstrated higher median scores. CONCLUSION: Using RSA to evaluate the 10-year in-vivo head penetration, there was no statistically significant difference in steady-state wear rates between OxZi and CoCr articulations. Both bearing combinations demonstrated wear rates well below the threshold for osteolysis.

Survivorship of Metaphyseal Cones and Sleeves in Revision Total Knee Arthroplasty.

BACKGROUND: Bone loss remains an anticipated challenge in revision total knee arthroplasty (rTKA). Recent efforts to enhance rTKA fixation and stability have focused on metaphyseal implants, namely cones and sleeves. We sought to compare cone and sleeve implant survivorship in rTKA. METHODS: One hundred eighty patients who underwent rTKA with metaphyseal implants from 2005 to 2018 were retrospectively reviewed. A total of 83 cones (22 femoral, 62 tibial) and 121 sleeves (58 femoral, 63 tibial) were identified. The mean age at the time of surgery was 72 years (range 43-97). Intraoperative Anderson Orthopaedic Research Institute bone loss classifications included the following: type 2A (25), type 2B (98), and type 3 (81). Mean follow-up was 41 months. RESULTS: Revision-free survival for cones was 91.3% vs 92.2% for sleeves (P = .29). Twelve knees (4 cones, 8 sleeves) underwent irrigation, debridement, and polyethylene exchange with metaphyseal implant retention for acute postoperative periprosthetic joint infection (PJI). Development of chronic PJI warranted removal of 7 cones (8.4%), 6 of which were initially placed as part of a 2-stage revision TKA. Eight sleeves (6.6%) were removed for PJI, with all initially placed during a second stage reimplantation. In the absence of infection, survival was 100% and 99.1% for cones and sleeves, respectively. One sleeve was revised for periprosthetic fracture. CONCLUSION: Metaphyseal cones and sleeves offer equally durable survivorship in revision TKA. PJI was the most common mode of implant failure in this series. Importantly, no cases of cone or sleeve aseptic loosening were observed.

Static vs Articulating Spacers for Two-Stage Revision Total Knee Arthroplasty: Minimum Five-Year Review.

BACKGROUND: The gold standard treatment for infected total knee arthroplasty (TKA) is two-stage revision. The first stage involves a temporary antibiotic spacer, which can be static or articulating; it remains unclear which is best. We aimed to compare 5-year outcomes between static and dynamic spacers. METHODS: One hundred and seventy-six patients with infected TKA requiring two-stage revision were enrolled. Patients were organized based on the type of spacer used during the first-stage revision. One hundred and four patients received articulating spacers, and 72 received static spacers. At 5 years, postoperative range of motion (ROM), Short Form 12 (SF-12), Knee Society Score (KSS), and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores were recorded. Reinfection and revisions were also tracked. RESULTS: Eradication of infection was similar in both groups, with 83.7% in the articulating group and 86.1% in the nonarticulating spacer group (P = .234). Articulating spacers resulted in significantly improved ROM (111 vs 82 degrees, P < .001), SF-12 physical component score (35.2 vs 31.0, P = .01), KSS (145.2 vs 113.7, P < .001), and WOMAC function scores (60.1 vs 51.1, P = .03) as compared to the static spacer group. CONCLUSIONS: Treatment with an articulating spacer as opposed to a static spacer resulted in improved ROM, SF-12 physical component score, KSS, and WOMAC function scores at the final follow-up visit. There was no significant difference in reinfection rates. Patients requiring staged revision for infected TKA may benefit from an articulating spacer.

Migration and Inducible Displacement of the Bicruciate-Stabilized Total Knee Arthroplasty: A Randomized Controlled Trial of Gap Balancing and Measured Resection Techniques.

BACKGROUND: The goal of this study is to investigate the migration and inducible displacement of a bicruciate-stabilized (BCS) total knee arthroplasty implanted using gap balancing (GB) or measured resection (MR) surgical techniques. We hypothesized equal migration and displacement between the techniques. METHODS: The study is a single-blinded, prospective, randomized controlled trial, with allocation of 71 patients to either GB or MR groups. Fifteen patients were withdrawn, resulting in 31 patients in the GB group and 25 in the MR group. Patients received the JOURNEY II™ BCS implant. Migration and inducible displacement were evaluated using radiostereometric analysis and patient examinations were performed at a 2-week baseline, and at 6 weeks, 3 months, 6 months, 1 year, and 2 years postoperation. RESULTS: No differences (P > .05) existed between GB and MR groups for any measurement of tibial or femoral migration. Both groups had tibial migrations below 0.5 mm from baseline to 6 months, and below 0.2 mm from both 6 months to 1 year and 1-2 years postoperation. No differences (P > .05) were found between GB and MR groups for inducible displacement. CONCLUSION: No differences were found in implant migration or inducible displacement between GB and MR groups. The BCS implant can be expected to have migration risks on par with industry standards and both surgical techniques are safe and effective options for implantation of this implant design.

Comparison of long-term kinematics and wear of total knee arthroplasty implant designs.

We sought to evaluate wear and kinematics in well-established implants of posterior stabilized (PS) and cruciate retaining (CR) designs. Ninety-one knees implanted for at least five years were examined. The implants were Genesis II PS (Smith & Nephew, Memphis, TN), Sigma PS (DePuy Synthes, Warsaw, IN), or Sigma CR. Radiostereometric analysis (RSA) images were acquired at multiple flexion angles and the 3D positions of the implant components were determined using model-based RSA software. The location of the center of the contact area between the femoral and polyethylene components was used to obtain contact kinematics, and the magnitude of the virtual intersection between the components indicated linear wear. All three groups had paradoxical anterior motion on both condyles, experienced similar net external rotation, and exhibited instances of internal rotation during flexion. The maximum observed wear rate was significantly greater for the Sigma PS than the Genesis II PS on the medial condyle (mean difference = 0.032 mm/year, p = 0.044), but not the lateral condyle, while there was no difference between the Sigma PS and Sigma CR for either condyle. Knees with lateral condylar separation had greater maximum wear rates on the medial condyle (mean difference = 0.033 mm/year, p = 0.001), while those with medial condylar separation had greater maximum wear rates on the lateral condyle (mean difference = 0.044 mm/year, p = 0.014). At long term follow-up in patients with well-functioning implants, there were differences in kinematics and wear resistance between implants. These results suggest that implant design affects long-term kinematics and wear in well-functioning implants and that condylar separation should be avoided to minimize wear.

Outcomes of Stemmed versus Un-Stemmed Varus-Valgus Constrained Components in Primary Total Knee Arthroplasty.

PURPOSE: The necessity of stemmed components when performing a varus-valgus constrained (VVC) primary total knee arthroplasty (TKA) is unclear. The purpose of this study is to compare the outcomes of primary VVC TKA with and without stems at a minimum of two years. METHODS: Patients in our prospectively collected database with primary VVC TKAs were identified. Patient demographics, prosthesis data, time in vivo, characteristics of revision, and radiographs and PROMs were compared between the stemmed and un-stemmed cohorts. RESULTS: Sixty-five patients with 69 primary VVC TKAs were identified; 17 were implanted with stems and 52 without stems. Five of the stemmed TKAs (5/17) required revision at 15.1 years, while only one of the un-stemmed TKA (1/52) required a revision at 21.6 years (p=0.003) for aseptic loosening. Of the 5 stemmed TKAs requiring revision, 3 were for aseptic loosening and 2 were for PPJI. The un-stemmed cohort had a significantly higher final total KSS (p=0.048). CONCLUSION: There was no increase in aseptic loosening or revision surgery in patients with non-stemmed primary VVC TKA compared to those with stemmed VVC TKA at mid-term follow-up. Utilizing non-stemmed TKA with VVC in appropriate cases is safe and may reduce cost, shorten operative time, and preserve bone-stock.

Iliopsoas Release: A Systematic Review of Clinical Efficacy and Associated Complications.

OBJECTIVE: To perform a systematic review of the findings of iliopsoas release as it relates to resolution of snapping, improvement of groin pain, and associated complications. DESIGN: Systematic review. DATA SOURCES: Four electronic databases PubMed/MEDLINE, EMBASE, CINAHL, and Web of Science were searched, identifying all literature pertaining to surgical treatment of a snapping hip/coxa saltans, iliopsoas impingement, or iliopsoas tendinitis. A total of 818 studies were identified. Two reviewers independently screened the titles, abstracts, and full-text articles for eligibility. ELIGIBILITY CRITERIA: All studies published in English that reported on iliopsoas release for snapping hip/coxa saltans, iliopsoas impingement, or iliopsoas tendinitis reporting outcomes or associated complications were eligible. RESULTS: A total of 48 articles were included in this review. Three surgical indications were identified for iliopsoas release, internal snapping hip, labral tear secondary to iliopsoas impingement, and iliopsoas tendinopathy after total hip arthroplasty. Arthroscopic techniques seemed to be superior to open techniques with regards to reoccurrence of snapping (5.1% vs 21.7%) and groin pain relief (89.1% vs 85.6%) with fewer complications (4.2% vs 21.1%) overall. CONCLUSIONS: Both open and arthroscopic iliopsoas releases have been shown to be successful treatment options regardless of the surgical indications identified in this review. Arthroscopic release demonstrated a decreased failure rate, fewer complications, and improved outcomes when compared with open procedures.

Midterm outcomes of total hip arthroplasty with a modular Birmingham head.

INTRODUCTION: Birmingham Hip Resurfacing (BHR) implants may be combined with a conventional femoral stem to create a modular metal-on-metal total hip arthroplasty (BHR MoM THA). There is little outcome data regarding this construct. This study examines midterm outcomes of BHR MoM THA compared to oxidised zirconium total hip arthroplasty (THA). METHODS: A retrospective institutional review identified all patients receiving BHR MoM THA between April 2005 and February 2011 and a matched control cohort of zirconium THA patients. Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Harris Hip Score (HHS), and SF-12 Health status scores were obtained. Revisions and complications were collected from clinical records. Radiographs were assessed for evidence of component malposition, loosening, osteolysis, or heterotopic ossification. RESULTS: 63 modular BHR MoM THA were identified in 61 patients (36 with BHR cups, 27 with R3 cups) and 63 zirconium THA in 58 matched controls. Mean follow-up was 58 months. 14 BHR MoM THA hips (22.2%) were revised (4 infections, 1 dislocation, 9 soft tissue reactions) compared to 3 (4.8%) zirconium THA (all infections). At latest follow-up, 18.4% of surviving BHR MoM THA hips were painful compared to 0.5% of zirconium THA controls (p < 0.001). WOMAC, HHS, and SF-12 did not differ significantly between surviving members of the 2 groups. DISCUSSION: BHR MoM THA demonstrated a high revision rate, largely for adverse local soft tissue reaction and pain. Among those not revised, many reported some residual pain despite similar quality of life measures to those who received zirconium THA.