Minimum 15-Year Survival of a Biconvex Inlay Patellar Component in Primary Total Knee Arthroplasty: An Analysis of 2,530 Total Knee Arthroplasties From a Single Institution.

BACKGROUND: Routine patellar resurfacing during primary total knee arthroplasty (TKA) remains controversial. To our knowledge, there are no studies reporting the long-term performance of a cemented biconvex all-polyethylene inlay component implanted at the time of primary TKA. The purpose of this study was to examine the 15-year survivorship and long-term clinical outcomes of this biconvex inlay patella used at our institution. METHODS: We retrospectively reviewed our prospectively collected institutional database and identified 2,530 patients who underwent cemented TKA with a single prosthetic design (from 1996 to 2007) where the patella was resurfaced using this cemented biconvex inlay patella. The mean age at surgery was 68 years (range, 29 to 93). The mean body mass index was 33.0 (range, 16.4 to 76.3), with 61.9% women. At the time of analysis, the mean time from surgery was 20.4 years (range, 15 to 26). We used Kaplan-Meier analysis to calculate survivorship at 15 years. We analyzed clinical outcomes using 3 patient-reported outcome measures collected prospectively. RESULTS: The 15-year survivorship with revision surgery for all causes as the end point was 97.1% (95% confidence interval 96.1 to 98.1%). The 15-year survivorship with revision surgery for a patella-related complication as the end point was 99.7% (95% confidence interval 99.4 to 1.0). At the final follow-up, patients showed significant improvement in scores for the Knee Society Clinical Rating System (P < .001), Western Ontario and McMaster University Osteoarthritis Index (P < .001), and Veterans Rand 12-Item Health Survey physical component (P < .001). CONCLUSIONS: Routine patellar resurfacing using a biconvex inlay patellar component has excellent survivorship and a low rate of complications at 15 years post-TKA.

Effect of Surgical Technique, Implant Design, and Time of Examination on Contact Kinematics: A Study of Bicruciate-Stabilized and Posterior-Stabilized Total Knee Arthroplasty.

BACKGROUND: Bicruciate-stabilized (BCS) total knee arthroplasty (TKA) designs attempt to approximate natural knee mechanics. Multiple surgical techniques, including gap balancing (GB) and measured resection (MR), have been developed to provide optimal implant positioning and soft-tissue balance. The goal of this study was to determine the effect of surgical technique on BCS TKA contact kinematics. Secondary goals included investigating the change of kinematics over time and comparing BCS TKA kinematics to a posterior-stabilized (PS) design. METHODS: The study included the BCS-GB, BCS-MR, and PS-MR groups. The BCS-GB and BCS-MR groups underwent weight-bearing radiostereometric analysis for multiple knee flexion angles at 3 months and 1 year postoperatively, whereas the PS-MR group was imaged at 1 year postoperatively. The medial and lateral contact kinematics were determined from implant poses. RESULTS: There were no differences in BCS TKA kinematics between the GB and MR techniques. There were differences in the mid-flexion ranges when comparing the 3-month and 1-year kinematics of the BCS design; however, they were less than 1.5 mm. Differences existed between the kinematics of the BCS and PS designs at all flexion angles for the medial condyle (P < .0006) and at 0° of flexion on the lateral condyle (P < .0001). CONCLUSIONS: Contact kinematics for a BCS design were similar for both surgical techniques, suggesting both are appropriate for this design. Small, likely clinically insignificant differences were found between 3-month and 1-year kinematics. The BCS TKA kinematics differed from the PS design; however, it is unclear whether these differences improve clinical outcomes.

Minimum 2-Year Outcomes of a Modern Monoblock Titanium Fluted Tapered Revision Stem for Complex Primary and Revision Total Hip Arthroplasty.

BACKGROUND: Modular titanium fluted tapered (TFT) stems have demonstrated excellent clinical success for femoral revision total hip arthroplasty (THA) surgery. This study reports the short-term outcomes of a novel modern monoblock TFT stem used for revision and complex primary THA with a minimum of 2 years of follow-up. METHODS: We identified 126 patients who received a single monoblock TFT stem: 26 patients for complex THA (failed fracture fixation) and 100 patients for revision THA. The reasons for revision THA included 40 for previous periprosthetic joint infection, 42 for aseptic loosening, 9 for trunnionosis, and 9 for periprosthetic fractures. The Paprosky grading for femoral bone loss at the time of surgery and the measured subsidence of femoral stems at 3-month follow-up were determined. We evaluated the number and indications for reoperations. RESULTS: The mean time from surgery was 3.9 years (range, 2.0 to 6.9). A paired t-test analysis showed significant improvement from preoperative versus postoperative clinical outcome scores (P < .001) for Harris Hip Score (38.76 ± 15.24 versus 83.42 ± 15.38), Western Ontario and McMaster Universities Arthritis Index (45.6 ± 19.0 versus 69.9 ± 21.3), Veterans RAND 12 Item Health Survey Physical component (31.7 ± 8.1 versus 37.8 ± 11.3), and Veterans RAND 12 Item Health Survey Mental component (48.2 ± 12.2 versus 51.6 ± 12.5). The Paprosky grading for femoral bone loss was Grade 1 (3.9%), Grade 2 (35.7%), Grade 3A (47.6%), Grade 3B (11.1%), and Grade 4 (1.6%) cases. There were 18 reoperations (14.7%), with 13 for periprosthetic joint infection (7 treated with implant retention and 6 treated with a 2-stage revision), 4 for instability, and 1 for acetabular aseptic loosening. There were no aseptic failures of the stem. CONCLUSIONS: This novel modern monoblock TFT stem provided reliable femoral fixation and has increasingly supplanted the use of modular TFT stems for complex primary and revision surgery in our institution.

Predictors of Undergoing Revision Within 5 Years of Total Knee Arthroplasty: A Population-Based Study.

BACKGROUND: The objective of this study was to identify the rate and risk factors for revision total knee arthroplasty (TKA) within the first 5 years postoperative. Our secondary objective was to identify the rate of additional surgical procedures and death. METHODS: We conducted a retrospective cohort study among patients in Ontario, Canada who underwent an elective, primary TKA between April 1, 2007, and March 31, 2014, for osteoarthritis. We excluded patients under 40 years and who had undergone a TKA within the previous 15 years. Our final study cohort included 94,193 patients. We reported the proportion of the study cohort who experienced revision surgery within 2 and 5 years of the primary TKA; secondary surgery within 5 years. We conducted Cochran-Armitage tests for trends to assess changes in the proportion of patients who experienced each of the study outcomes, and multivariable logistic regressions to evaluate predictors of a revision TKA. RESULTS: There were 3,112 (3.3%) patients who had a revision within 5 years, and 1,866 (2.0%) within 2 years of their primary TKA. 3,316 (3.5%) had a secondary surgery (0.6% patellar resurfacing; 1.6% manipulation; 1.3% synovectomy; 0.5% washout; 0.9% debridement). Lower age, men, lower income, higher comorbidity score, depression, previous arthroscopy, lower surgeon volume, and general anesthesia were all significant positive predictors of revision. CONCLUSIONS: In our study cohort, 2.0% of patients had a revision TKA within 2 years, and 3.3% within 5 years of their primary TKA. Preoperative identification of risk factors may reduce the future prevalence of revision TKAs.

Minimum 5-Year Clinical Outcomes and Survivorship for a Single Revision Total Knee Arthroplasty System Using Hybrid Fixation and Press-Fit Stems.

BACKGROUND: Hybrid fixation, utilizing diaphyseal press-fit stems and cement fixation in the tibial and femoral metaphyseal areas, has long been a strategy for revision total knee arthroplasty (rTKA). The purpose of this study was to evaluate the clinical outcomes and survivorships of hybrid fixation using a single rTKA revision system with a minimum of 5 years follow-up. METHODS: We reviewed our prospectively collected database to identify 281 patients who underwent rTKA using a single revision system with hybrid fixation and press-fit stems between July 2006 and August 2016. We reviewed the clinical outcome scores, including the Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis index, and Veterans RAND 12 Item Health Survey. We also evaluated the 5 and 10-year survivorships and the indications for reoperations. The cohort had a mean age of 70 years (range, 45.2 to 92.0) and a mean body mass index of 33.4 (range, 17.3 to 55.8). The mean time from rTKA surgery was 11.1 years (range, 5.3 to 15.5). RESULTS: Paired t-test analyses showed significant improvements from preoperative versus postoperative clinical outcome scores (P < .001) for Knee Society Score, Western Ontario and McMaster Universities Osteoarthritis, and Veterans RAND 12 Item Health Survey Physical component. Prosthetic joint infections after index rTKA were the most common failure mode with 29 patients requiring reoperations. Rerevision due to aseptic loosening was uncommon (6 patients) with a cumulative survival rate of 95.2% at 5 years and 94.2% at 10 years. CONCLUSION: The use of this single rTKA system utilizing press fit stems combined with hybrid fixation provided significant improvements in the clinical outcomes and excellent survivorships at 5 and 10 years.

No Difference in Subsidence Between Modern Monoblock and Modular Titanium Fluted Tapered Femoral Stems.

BACKGROUND: Subsidence remains a concern when utilizing tapered fluted titanium (TFT) femoral stems and may lead to leg length discrepancy, impingement, instability, and failure to obtain osseointegration. This study aims to compare stem subsidence across 3 modern TFT stems. Our secondary aim was to investigate the influence of bicortical contact or "scratch fit" on subsidence, as well as the role of intraoperative imaging in maximizing bicortical contact and preventing stem subsidence. METHODS: A retrospective review of 271 hip arthroplasties utilizing modern TFT stems at a single institution was performed. Three stem designs were included in the analysis: 1 monoblock TFT stem (n = 91) and 2 modular TFT stems (n = 90; n = 90). Patient demographics, Paprosky femoral bone loss classification, bicortical contact, utilization of intraoperative imaging, and stem subsidence (comparison of initial postoperative radiograph to the latest follow-up radiograph-minimum 3 months) were recorded. RESULTS: There was no statistically significant difference in overall subsidence (P = .191) or the incidence of subsidence >5 millimeters between stems (P = .126). Subgroup analysis based on femoral bone loss grading showed no difference in subsidence between stems. Increased bicortical contact was associated with reduced subsidence (P = .004). Intraoperative imaging was used in 46.5% (126 of 271) of cases; this was not correlated with bicortical contact (P = .673) or subsidence (P = .521). CONCLUSION: All 3 modern TFT stems were highly successful and associated with low rates of subsidence, regardless of modular or monoblock design. Surgeons should select the stem that they feel is most clinically appropriate.

Correlating Contact Kinematics to Tibial Component Migration Following Cemented Bicruciate Stabilized Total Knee Arthroplasty.

BACKGROUND: Contact kinematics in total knee arthroplasty (TKA) has been shown to affect tibial component migration. However, previous studies correlating kinematic variables to implant migration were completed with older TKA designs. The goal of this study was to determine if there are associations between contact kinematics and tibial component migration for a cemented, bicruciate stabilized (BCS) TKA system. METHODS: A total of 54 knees implanted with a BCS TKA system were analyzed using radiostereometric analysis (RSA). Patients underwent RSA exams at 2 weeks, 6 weeks, 3 months, 6 months, 1 year, and 2 years post operation to measure tibial component migration. At 1 year, contact kinematics was evaluated during a quasi-static deep knee bend. Linear regression analyses were performed between kinematic variables and migration values. RESULTS: Significant correlations were found between contact kinematics and tibial component migration. Excursion on the lateral condyle was the most consistent variable correlating with implant migration. Six patients had > 0.2 mm migrations from 1 to 2 years post operation indicating continuously migrating tibial components, and most had atypical contact kinematics. CONCLUSION: Kinematics was shown to influence tibial component migration. Reduced lateral excursion, suggesting a more constrained lateral condyle, resulted in greater implant migration. The 6 patients who had continuously migrating tibial components had demographic factors that may limit the ability to endure unintended force transmissions caused by abnormal kinematics. These results highlight the importance of restoring knee kinematics with this BCS TKA design to minimize improper force transmissions and resultant increased implant migrations.

Patient and Implant Performance of Satisfied and Dissatisfied Total Knee Arthroplasty Patients.

BACKGROUND: Implant migration and altered kinematics have been thought to impact patient-reported outcome measures (PROMs) and postoperative patient satisfaction. In this study comparing satisfied and dissatisfied total knee arthroplasty (TKA) patients, we hypothesized that dissatisfied patients will have greater continuous implant migration and that there will be differences in joint kinematics, objective functional measurements, and PROMs between satisfied and dissatisfied patients. METHODS: The Knee Society Score Satisfaction Subsection questions regarding satisfaction with function were used at least 6 months postoperation to split 50 patients into satisfied and dissatisfied groups. Patients underwent radiostereometric analysis to evaluate migration and kinematics. A wearable sensor system obtained objective measurements of patient function during timed up and go tests. PROMs were recorded preoperation and postoperation. RESULTS: No statistically significant differences were found in migration between satisfied and dissatisfied groups. Statistical kinematic differences existed in lateral anteroposterior contact location at 20° and 40° of flexion at 1 year, where the dissatisfied group had more anteriorly located lateral contact. No statistically significant differences were present in objective functional measurements. Satisfied and dissatisfied groups had differing PROMs at 4 timepoints or greater for each questionnaire. CONCLUSIONS: No differences were found in tibial component migration or objectively measured function between satisfied and dissatisfied patients. Functionally dissatisfied patients had more anteriorly positioned contact on the lateral condyle in early flexion and reported more pain and unmet expectations. These findings suggest that improving the functional satisfaction of TKA requires restoration of kinematics in early flexion and management of patient's pain and expectations.

The Prevalence and Outcomes of Unexpected Positive Intraoperative Cultures in Presumed Aseptic Revision Knee Arthroplasty.

BACKGROUND: The prevalence and outcomes of unexpected positive intraoperative cultures (UPC) in presumed aseptic revision total knee arthroplasty (TKA) are unclear. The purpose of this study was to determine the prevalence of UPC and infection-free implant survival in this patient population. Secondly, we aimed to compare the infection-free implant survival between cohorts based on number of UPCs and antibiotic treatment. METHODS: We reviewed our institutional database from 2006 to 2019 for all TKA revisions (n = 1795) to identify all presumed aseptic TKA revisions with intraoperative culture(s). After exclusions, 775 revisions were eligible and those with UPC were included in the Kaplan-Meier analysis to determine infection-free implant survival for the cohorts. RESULTS: The prevalence of UPC was 9.8%. The 2- and 5-year infection-free survival was 97.4% and 95.3%, respectively. The 5-year infection-free survival from the same microorganism as the UPC was 98.7%. Infection-free survival was similar for the 1 versus ≥2 UPC cohorts (P = .416), however was poorer for the cohort treated with antibiotics (P = .021). Only one of 3 subsequent PJI-related implant failures was caused by the same microorganism (polymicrobial) as the UPC. There were no subsequent infections in patients with a single UPC not treated with antibiotics. CONCLUSIONS: The prevalence of UPC was 9.8% and the infection-free implant survival is excellent. Infection-free survivorship from PJI caused by the same UPC microorganism is outstanding. Comparisons between cohorts must be interpreted with caution due to study limitations. A single UPC in patents without other signs of infection does not require antibiotic treatment. LEVEL OF EVIDENCE: IV.

Unit Sales Trends of Hip Arthroplasty Procedures Performed in Ontario in 2020.

BACKGROUND: In March 2020, an emergency was declared in the province of Ontario owing to the COVID-19 pandemic. From March 19 to May 26, all elective total hip arthroplasty (THA) and total knee arthroplasty (TKA) procedures were deferred. The purpose of this study was to review the unit sales data of THA and TKA procedures in Ontario over this time period to identify any trends in surgical activity. METHODS: Unit sales data for all THA and TKA procedures performed in Ontario between January 2019 and December 2020 were reviewed. All orthopedic companies contributed to the data set. Femoral stems were considered an indicator of THA procedures, while primary femurs were considered an indicator of TKA procedures. Data were analyzed to determine trends in THA and TKA procedures during the deferral period and the relative change in THA and TKA activity following resumption. RESULTS: There was a 53% reduction in THA activity between March and May of 2020 when compared to the same interval in 2019. From June to September of 2019, THA sales activity was 87.3% that of TKA. From June to September of 2020, THA sales activity was 122.8% that of TKA. CONCLUSION: Provincial directives aimed at controlling the outbreak of COVID-19 contributed to a substantial reduction in THA and TKA activity in 2020. Compared to 2019, there was a disproportionate increase in THA compared to TKA activity in 2020 following resumption of surgical services. These data have implications in recovery planning for the surgical backlog of THA in Ontario.

Migration and Inducible Displacement of the Bicruciate-Stabilized Total Knee Arthroplasty: A Randomized Controlled Trial of Gap Balancing and Measured Resection Techniques.

BACKGROUND: The goal of this study is to investigate the migration and inducible displacement of a bicruciate-stabilized (BCS) total knee arthroplasty implanted using gap balancing (GB) or measured resection (MR) surgical techniques. We hypothesized equal migration and displacement between the techniques. METHODS: The study is a single-blinded, prospective, randomized controlled trial, with allocation of 71 patients to either GB or MR groups. Fifteen patients were withdrawn, resulting in 31 patients in the GB group and 25 in the MR group. Patients received the JOURNEY II™ BCS implant. Migration and inducible displacement were evaluated using radiostereometric analysis and patient examinations were performed at a 2-week baseline, and at 6 weeks, 3 months, 6 months, 1 year, and 2 years postoperation. RESULTS: No differences (P > .05) existed between GB and MR groups for any measurement of tibial or femoral migration. Both groups had tibial migrations below 0.5 mm from baseline to 6 months, and below 0.2 mm from both 6 months to 1 year and 1-2 years postoperation. No differences (P > .05) were found between GB and MR groups for inducible displacement. CONCLUSION: No differences were found in implant migration or inducible displacement between GB and MR groups. The BCS implant can be expected to have migration risks on par with industry standards and both surgical techniques are safe and effective options for implantation of this implant design.

Contact kinematics of patient-specific instrumentation versus conventional instrumentation for total knee arthroplasty.

BACKGROUND: The goal was to evaluate the joint contact kinematics of total knee arthroplasties implanted using patient-specific instrumentation (PSI) compared to conventional instrumentation (CI). We hypothesized that use of PSI would not significantly alter contact kinematics. METHODS: The study was a prospective randomized controlled trial, with equal allocation of fifty patients to PSI and CI groups. At two years post-operation, patients underwent weight-bearing stereo X-ray examinations at 0°, 20°, 40°, 60°, 80°, and 100° of flexion. The shortest tibiofemoral distance on each condyle determined the contact location. Magnitude of the shortest distance was measured and condylar separation was analyzed using thresholds of 0.5 and 0.75 mm. Kinematic measurements derived from the shortest distance included anteroposterior (AP) translation, excursion, axial rotation, and paradoxical anterior motion. Pivot position and cam/post contact were also investigated. RESULTS: There were no differences (p > 0.05) in medial and lateral AP contact locations, excursions, and magnitude of anterior motion, or in axial rotation, pivot patterns, frequency of cam/post engagement, frequency of medial anterior motion, and condylar separation at a 0.75 mm threshold. Significant differences were found in frequency of lateral anterior motion (p = 0.048) and condylar separation at a 0.5 mm threshold (p = 0.010). Both groups displayed typical kinematics for a fixed-bearing posterior-stabilized implant. CONCLUSIONS: We found no major differences in knee kinematics between PSI and CI groups, which suggest that PSI does not provide a significant kinematic advantage over conventional instruments.

Three Femoral Stem Designs Without Corrosion: A Review of 2095 Stems.

INTRODUCTION: Corrosion at the head-neck interface of modular components in total hip arthroplasty (THA) has been reported as a cause of failure of modern total hip replacement implants. While this method of failure has been well described, it remains poorly understood. The purpose of this study is to review the three most commonly used uncemented femoral stems at our institution over the last fifteen years and to correlate any established risk factors with rates of revision, particularly corrosion. METHODS: We reviewed 2095 patients from March 2000 to September 2015 who underwent total hip arthroplasty with one of three uncemented femoral stem designs. All stems were made of a Ti6Al4V alloy with a 12/14 taper design. We included only those stems coupled with a CoCr head and a highly crosslinked polyethylene liner. We evaluated age, gender, body mass index (BMI), femoral head size, head length, neck angle and offset and correlated these to the incidence of all cause revision, as well as revision excluding infection. RESULTS: There were no recognized corrosion-related revisions identified. There was no association between age, BMI, gender, head length, neck angle and offset to all cause revision or revision with infection excluded (p>0.05). Femoral head size less than 32mm was associated with higher all cause revision rates (OR 4.60 (95% CI 1.8, 11.8)) and when excluding infection as a reason for revision (OR 4.94 (95% CI 1.7, 14.41)). CONCLUSION: Over the last fifteen years, we have not identified any cases of corrosion with the three most commonly used femoral stems used at out institution. While we acknowledge that no femoral stem is immune to corrosion, certain femoral stem designs may be uniquely resistant to this mode of failure. LEVEL OF EVIDENCE: III.

Image-based design and 3D-metal printing of a rat hip implant for use in a clinically representative model of joint replacement.

The aim of this study was to obtain micro-computed tomography derived measurements of the rat proximal femur, to create parameterized rat hip implants that could be surgically installed in a clinically representative small animal model of joint replacement. The proximal femoral anatomy of N = 25 rats (male, Sprague-Dawley, 390-605 g) was quantified. Key measurements were used to parameterize computer-aided design models of monoblock rat femoral implants. Linear regression analysis was used to determine if rat hip dimensions could be predicted from animal weight. A correlation analysis was used to determine how implants could be scaled to create a range of sizes. Additive manufacturing (3D printing) was used to create implants in medical-grade metal alloys. Linear regressions comparing rat weight to femoral head diameter and neck-head axis length revealed a significant nonzero slope (P < .05). Pearson's correlation analysis revealed five significant correlations between key measurements in the rat femur (P < .05). Implants were installed into both cadaveric and live animals; iterative design modifications were made to prototypes based on these surgical findings. Animals were able to tolerate the installation of implants and were observed ambulating on their affected limbs postoperatively. Clinical significance: We have developed a preclinical rat hip hemiarthroplasty model using image-based and iterative design techniques to create 3D-metal printed implants in medical-grade metal alloys. Our findings support further development of this model for use as a low-cost translational test platform for preclinical orthopaedic research into areas such as osseointegration, metal-on-cartilage wear, and periprosthetic joint infection.

The role of isolated polyethylene exchange in total knee arthroplasty.

The use of modular total knee arthroplasty (TKA) implants allows surgeons to perform isolated tibial polyethylene insert exchange (IPE) while retaining well-fixed and stable components.The purported advantages of IPE include preservation of bone stock, shorter operating time, less blood loss, faster rehabilitation and lower cost. However, the indications for IPE are limited.IPE for wear and osteolysis has moderate success in the medium term but should be avoided in cases of accelerated wear. In selected cases, debridement and IPE for early infection can result in low morbidity with high success rates in the short term. IPE for arthrofibrosis has poor results.IPE should be undertaken with caution and an institutional algorithm should be followed. Cite this article: EFORT Open Rev 2017;2:66-71 DOI: 10.1302/2058-5241.2.160049.

Is There a Role for Preoperative Iron Supplementation in Patients Preparing for a Total Hip or Total Knee Arthroplasty?

BACKGROUND: Several treatment modalities exist for the treatment of perioperative anemia. We determined the effect of oral iron supplementation on preoperative anemia, and the use of blood-conserving interventions before total hip arthroplasty (THA) and total knee arthroplasty (TKA). METHODS: A total of 3435 total joint arthroplasties (1461 THAs and 1974 TKAs) were analyzed during 2 phases of a blood conservation program. The first phase used erythropoietin alfa (EPO) or intravenous (IV) iron for patients at risk for perioperative anemia. The second phase included these interventions, as well as preoperative iron supplementation. The effect on preoperative hemoglobin (Hb) and serum ferritin, as well as EPO and IV iron utilization, was determined. RESULTS: Oral iron therapy increased preoperative Hb level by 6 g/L (P < .001) and 7 g/L (P < .001) in the hip and knee cohorts, respectively. Serum ferritin level rose by 80 µg/L (P < .001) and 52 µg/L (P < .001) in the hip and knee cohorts, respectively. The number of patients with an Hb level <130 g/L was significantly reduced (P < .001 for both cohorts), as were patients with serum ferritin levels <35 µg/L (P = .002 for hip and P < .001 for knee cohorts). Utilization of EPO reduced from 16% to 6% (P < .001) and 18% to 6% (P < .001) in the hip and knee cohorts, respectively. Utilization of IV iron reduced from 4% to 2% (P = .05) and 5% to 2% (P < .001) in the hip and knee cohorts, respectively. CONCLUSION: Oral iron therapy reduced the burden of perioperative anemia and reduced utilization of other blood-conserving therapies before THA and TKA. Future research should delineate the cost-effectiveness of oral iron therapy.

The Impact of Coronal Plane Alignment on Polyethylene Wear and Damage in Total Knee Arthroplasty: A Retrieval Study.

BACKGROUND: Coronal plane alignment is one of the contributing factors to polyethylene wear in total knee arthroplasty. METHODS: Based on 95 retrieved polyethylene inserts, wear and damage patterns were analyzed in relationship to the overall mechanical alignment and to the position of the tibial component. RESULTS: A progression of wear was observed with progressively mechanical varus alignment. However, there was significantly more damage in the lateral compartment in the mild and moderate varus group compared to the valgus group. No difference in damage was seen between all groups for tibial component positioning in valgus or varus. CONCLUSION: Progressive wear was observed with progressively varus alignment with more damage at the lateral side. This observation is unique and might be explained by lateral condylar lift-off inducing impact and shear loading in the varus group.

Clinical Impact of Trunnion Wear After Total Hip Arthroplasty.

Trunnionosis, characterized by corrosion and fretting of the taper, is a well-known entity commonly demonstrated in retrieval specimens. While there have been a number of recent reports regarding the potential for adverse local tissue reactions related to trunnionosis, it remains a relatively infrequent cause for failure of total hip replacement implants. A number of factors, including both biomechanical and bioelectrochemical factors, have a known impact on the development and severity of trunnionosis. Furthermore, specific implant design and material-related factors have been shown to influence the risk of trunnionosis leading to adverse local tissue reactions. Retention of a well-fixed femoral stem, in spite of corrosion of the male taper junction, is acceptable in the majority of cases. A ceramic head, often in combination with a titanium adaptor sleeve, is the most common replacement reported in the current literature to treat trunnionosis. In patients with modular-neck total hip replacements, revision of the femoral stem is likely required if corrosion at the modular neck-stem junction is encountered.

Mid-term survivorship and clinical outcomes of cobalt-chrome and oxidized zirconium on highly crosslinked polyethylene.

BACKGROUND: The choice of bearing articulation for total hip arthroplasty in younger patients is amenable to debate. We compared mid-term patient-reported outcomes and survivorship across 2 different bearing articulations in a young patient cohort. METHODS: We reviewed patients with cobalt-chrome or oxidized zirconium on highly crosslinked polyethylene who were followed prospectively between 2004 and 2012. Kaplan-Meier analysis was used to determine predicted cumulative survivorship at 5 years with all-cause and aseptic revisions as the outcome. We compared patient-reported outcomes, including the Harris hip score (HHS), Western Ontario and McMaster University Osteoarthritis Index (WOMAC) and Short-form 12 (SF-12) scores. RESULTS: A total of 622 patients were followed during the study period. Mean follow-up was 8.2 (range 2.0-10.6) years for cobalt-chrome and 7.8 (range 2.1-10.7) years for oxidized zirconium. Mean age was 54.9 ± 10.6 years for cobalt-chrome and 54.8 ± 10.7 years for oxidized zirconium. Implant survivorship was 96.0% (95% confidence interval [CI] 94.9%-97.1%) for cobalt-chrome and 98.7% (95% CI 98.0%-99.4%) for oxidized zirconium on highly crosslinked polyethylene for all-cause revisions, and 97.2% (95% CI 96.2%-98.2%) for cobalt-chrome and 99.0% (95% CI 98.4%-99.6%) for oxidized zirconium for aseptic revisions. An age-, sex- and diagnosis-matched comparison of the HHS, WOMAC and SF-12 scores demonstrated no significant changes in clinical outcomes across the groups. CONCLUSION: Both bearing surface couples demonstrated excellent mid-term survivorship and outcomes in young patient cohorts. Future analyses on wear and costs are warranted to elicit differences between the groups at long-term follow-up.

CONTEXTE: Le choix de la surface d'appui à utiliser dans une arthroplastie totale de la hanche chez de jeunes patients ne fait pas l'unanimité. Nous avons comparé les résultats déclarés par les patients et la survie à moyen terme associés à 2 surfaces d'appui différentes dans une cohorte de jeunes patients. MÉTHODES: Nous avons étudié les cas de patients ayant reçu une prothèse de chrome-cobalt ou de zirconium oxydé couplé au polyéthylène hautement réticulé suivis de façon prospective entre 2004 et 2012. La méthode de Kaplan­Meier a été employée pour déterminer la survie cumulative estimée après 5 ans dans les cas où le résultat est soit la reprise toutes causes confondues, soit la reprise aseptique. Nous avons comparé les résultats déclarés par les patients, notamment au moyen du score de Harris (HHS), de l'indice WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index) et des scores issus de la version courte du questionnaire d'évaluation de l'état de santé général SF-12. RÉSULTATS: Au total, 622 patients ont été suivis durant la période de l'étude. En moyenne, le suivi a duré 8,2 ans (plage de 2,0 à 10,6 ans) pour le chrome-cobalt et 7,8 ans (plage de 2,1 à 10,7 ans) pour le zirconium oxydé. L'âge moyen des patients était de 54,9 ± 10,6 ans pour le chrome-cobalt et de 54,8 ± 10,7 ans pour le zirconium oxydé. Le taux de survie de la prothèse était de 96,0 % (IC à 95 % 94,9­97,1 %) pour le chrome-cobalt et 98,7 % (IC à 95 % 98,0­99,4 %) pour le zirconium oxydé couplé au polyéthylène hautement réticulé dans les cas de reprises toutes causes confondues, et de 97,2 % (IC à 95 % 96,2­98,2 %) pour le chrome-cobalt et 99,0 % (IC à 95 % 98,4­99,6 %) pour le zirconium oxydé dans les cas de reprises aseptiques. Une comparaison appariée fondée sur l'âge, le sexe et le diagnostic réalisée entre le HHS, l'indice WOMAC et les scores au questionnaire SF-12 n'a démontré aucun changement significatif entre les groupes quant aux résultats cliniques. CONCLUSION: Les 2 types de surface d'appui ont produit un taux de survie à moyen terme très élevé et d'excellents résultats dans des cohortes de jeunes patients. Il y a lieu de réaliser des analyses sur l'usure et les coûts afin de mettre en évidence les différences entre les groupes suivis à long terme.