Band gap opening of metallic single-walled carbon nanotubes via noncovalent symmetry breaking.

Covalent bonding interactions determine the energy-momentum (E-k) dispersion (band structure) of solid-state materials. Here, we show that noncovalent interactions can modulate the E-k dispersion near the Fermi level of a low-dimensional nanoscale conductor. We demonstrate that low energy band gaps may be opened in metallic carbon nanotubes through polymer wrapping of the nanotube surface at fixed helical periodicity. Electronic spectral, chiro-optic, potentiometric, electronic device, and work function data corroborate that the magnitude of band gap opening depends on the nature of the polymer electronic structure. Polymer dewrapping reverses the conducting-to-semiconducting phase transition, restoring the native metallic carbon nanotube electronic structure. These results address a long-standing challenge to develop carbon nanotube electronic structures that are not realized through disruption of π conjugation, and establish a roadmap for designing and tuning specialized semiconductors that feature band gaps on the order of a few hundred meV.

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation.

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe2 O3 on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO2 as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe2 O3 |-carbazole|TiO2 |-Ru(carbene), demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe2 O3 to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.

Excited-State Dynamics and Nonlinear Optical Properties of Hyperpolarizable Chromophores Based on Conjugated Bis(terpyridyl)Ru(II) and Palladium and Platinum Porphyrinic Components: Impact of Heavy Metals upon Supermolecular Electro-Optic Properties.

A new series of strongly coupled oscillators based upon (porphinato)Pd, (porphinato)Pt, and bis(terpyridyl)ruthenium(II) building blocks is described. These RuPPd, RuPPt, RuPPdRu, and RuPPtRu chromophores feature bis(terpyridyl)Ru(II) moieties connected to the (porphinato)metal unit via an ethyne linker that bridges the 4'-terpyridyl and porphyrin macrocycle meso-carbon positions. Pump-probe transient optical data demonstrate sub-picosecond excited singlet-to-triplet-state relaxation. The relaxed lowest-energy triplet (T1) excited states of these chromophores feature absorption manifolds that span the 800-1200 nm spectral region, microsecond triplet-state lifetimes, and large absorptive extinction coefficients [ε(T1 → Tn) > 4 × 104 M-1 cm-1]. Dynamic hyperpolarizability (ßλ) values were determined from hyper-Rayleigh light scattering (HRS) measurements carried out at several incident irradiation wavelengths over the 800-1500 nm spectral region. Relative to benchmark RuPZn and RuPZnRu chromophores which showed large ßHRS values over the 1200-1600 nm range, RuPPd, RuPPt, RuPPdRu, and RuPPtRu displayed large ßHRS values over the 850-1200 nm region. Generalized Thomas-Kuhn sum (TKS) rules and experimental hyperpolarizability values were utilized to determine excited state-to-excited state transition dipole terms from experimental electronic absorption data and thus assessed frequency-dependent ßλ values, including two- and three-level contributions for both ßzzz and ßxzx tensor components to the RuPPd, RuPPt, RuPPdRu, and RuPPtRu hyperpolarizability spectra. These analyses qualitatively rationalize how the ßzzz and ßxzx tensor elements influence the observed irradiation wavelength-dependent hyperpolarizability magnitudes. The TKS analysis suggests that supermolecules related to RuPPd, RuPPt, RuPPdRu, and RuPPtRu will likely feature intricate dependences of experimentally determined ßHRS values as a function of irradiation wavelength that derive from substantial singlet-triplet mixing, and complex interactions among multiple different ß tensor components that modulate the long wavelength regime of the nonlinear optical response.

Influence of Surface and Structural Variations in Donor-Acceptor-Donor Sensitizers on Photoelectrocatalytic Water Splitting.

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D-A-D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5'-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore-catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the -COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4'-((HO)2OPCH2)2-2,2'-bipyridine)(OH2)]2, RuCt2+, or proton reduction catalyst [Ni(P2PhN2C6H4CH2PO3H2)2]2+, NiCt2+, on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO2|TiO2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore-catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore-catalyst assemblies.

Dye-Sensitized Nonstoichiometric Strontium Titanate Core-Shell Photocathodes for Photoelectrosynthesis Applications.

A core-shell approach that utilizes a high-surface-area conducting core and an outer semiconductor shell is exploited here to prepare p-type dye-sensitized solar energy cells that operate with a minimal applied bias. Photocathodes were prepared by coating thin films of nanocrystalline indium tin oxide with a 0.8 nm Al2O3 seeding layer, followed by the chemical growth of nonstoichiometric strontium titanate. Films were annealed and sensitized with either a porphyrin chromophore or a chromophore-catalyst molecular assembly consisting of the porphyrin covalently tethered to the ruthenium complex. The sensitized photoelectrodes produced cathodic photocurrents of up to -315 µA/cm2 under simulated sunlight (AM1.5G, 100 mW/cm2) in aqueous media, pH 5. The photocurrent was increased by the addition of regenerative hole donors to the system, consistent with slow interfacial recombination kinetics, an important property of p-type dye-sensitized electrodes.

De Novo Design, Solution Characterization, and Crystallographic Structure of an Abiological Mn-Porphyrin-Binding Protein Capable of Stabilizing a Mn(V) Species.

De novo protein design offers the opportunity to test our understanding of how metalloproteins perform difficult transformations. Attaining high-resolution structural information is critical to understanding how such designs function. There have been many successes in the design of porphyrin-binding proteins; however, crystallographic characterization has been elusive, limiting what can be learned from such studies as well as the extension to new functions. Moreover, formation of highly oxidizing high-valent intermediates poses design challenges that have not been previously implemented: (1) purposeful design of substrate/oxidant access to the binding site and (2) limiting deleterious oxidation of the protein scaffold. Here we report the first crystallographically characterized porphyrin-binding protein that was programmed to not only bind a synthetic Mn-porphyrin but also maintain binding site access to form high-valent oxidation states. We explicitly designed a binding site with accessibility to dioxygen units in the open coordination site of the Mn center. In solution, the protein is capable of accessing a high-valent Mn(V)-oxo species which can transfer an O atom to a thioether substrate. The crystallographic structure is within 0.6 Å of the design and indeed contained an aquo ligand with a second water molecule stabilized by hydrogen bonding to a Gln side chain in the active site, offering a structural explanation for the observed reactivity.

Electron-Withdrawing Boron Dipyrromethene Dyes As Visible Light Absorber/Sensitizers on Semiconductor Oxide Surfaces.

The synthesis, characterization, and electrochemical and photophysical properties of the phosphonate-derivatized carbazole (CBZ) and boron dipyrromethene (BODIPY) chromophores in the dyes, BODIPY(CBZ)2PO3H2 (8) and BODIPY(Tol)2PO3H2 (7), are described. The oxide-bound dyes have been explored as light absorbers in dye-sensitized photoelectrosynthesis cell (DSPEC) applications. The BODIPY-CBZ phosphonate ester (6) features a broad, intense UV-visible absorption spectrum with absorptions at 297 and 650 nm that arise from mixed transitions at the CBZ and BODIPY units. Electrochemical measurements on BODIPY(CBZ)2Br (4) in 0.1 M [nBu4N][PF6] in dichloromethane, vs normal hydrogen electrode (NHE), reveal reversible oxidations at 1.19 and 1.41 V and a reversible reduction at -0.59 V. On indium tin oxide (ITO) and TiO2, a reversible one-electron oxidation appears for 7 at 0.86 and 0.90 V vs NHE in dichloromethane, respectively, which demonstrates the redox stability on metal oxide surfaces. The results of nanosecond transient absorption measurements on SnO2/TiO2 electrodes provide direct evidence for excited-state electron injection into the conduction band of TiO2 following 590 nm excitation. A longer lifetime for 8+ compared to 7+ is consistent with extensive intramolecular charge separation between the CBZ and BODIPY units on the surface. Photoelectrochemical studies on 8 on a SnO2/TiO2 photoanode resulted in sustained photocurrents with current maxima of ∼200 µA/cm2 with hydroquinone added as a reductant under 1 sun (AM1.5 100 mW·cm-2) illumination at pH 4.5 in 0.1 M acetate buffer and 0.4 M LiClO4. On mixed SnO2/TiO2 electrode surfaces, with the added catalyst [Ru(Mebimpy)((4,4'-(OH)2PO-CH2)2bpy)(OH2)]2+ and chromophores 7 and 8, addition of 0.1 M benzyl alcohol resulted in sustained photocurrents of 12 and 35 µA/cm2, consistent with oxidation to benzaldehyde.

Steering CO2 electroreduction toward ethanol production by a surface-bound Ru polypyridyl carbene catalyst on N-doped porous carbon.

Electrochemical reduction of CO2 to multicarbon products is a significant challenge, especially for molecular complexes. We report here CO2 reduction to multicarbon products based on a Ru(II) polypyridyl carbene complex that is immobilized on an N-doped porous carbon (RuPC/NPC) electrode. The catalyst utilizes the synergistic effects of the Ru(II) polypyridyl carbene complex and the NPC interface to steer CO2 reduction toward C2 production at low overpotentials. In 0.5 M KHCO3/CO2 aqueous solutions, Faradaic efficiencies of 31.0 to 38.4% have been obtained for C2 production at -0.87 to -1.07 V (vs. normal hydrogen electrode) with 21.0 to 27.5% for ethanol and 7.1 to 12.5% for acetate. Syngas is also produced with adjustable H2/CO mole ratios of 2.0 to 2.9. The RuPC/NPC electrocatalyst maintains its activity during 3-h CO2-reduction periods.

Excitation energy-dependent photocurrent switching in a single-molecule photodiode.

The direction of electron flow in molecular optoelectronic devices is dictated by charge transfer between a molecular excited state and an underlying conductor or semiconductor. For those devices, controlling the direction and reversibility of electron flow is a major challenge. We describe here a single-molecule photodiode. It is based on an internally conjugated, bichromophoric dyad with chemically linked (porphyrinato)zinc(II) and bis(terpyridyl)ruthenium(II) groups. On nanocrystalline, degenerately doped indium tin oxide electrodes, the dyad exhibits distinct frequency-dependent, charge-transfer characters. Variations in the light source between red-light (∼1.9 eV) and blue-light (∼2.7 eV) excitation for the integrated photodiode result in switching of photocurrents between cathodic and anodic. The origin of the excitation frequency-dependent photocurrents lies in the electronic structure of the chromophore excited states, as shown by the results of theoretical calculations, laser flash photolysis, and steady-state spectrophotometric measurements.

A Silicon-Based Heterojunction Integrated with a Molecular Excited State in a Water-Splitting Tandem Cell.

Semiconductor-based photocathodes with high light-absorption capability are of interest in the production of solar fuels, but many of them are limited by low efficiencies due to rapid interfacial back electron transfer. We demonstrate here that a nanowire-structured p-type Si (p-Si) electrode, surface-modified with a perylene-diimide derivative (PDI'), can undergo photoreduction of a surface-bound, water reduction catalyst toward efficient H2 evolution under a low applied bias. At the electrode interface, the PDI' layer converts green light into high-energy holes at its excited state for extraction of photogenerated electrons at the photoexcited p-Si. The photogenerated electrons at the reduced PDI' are subsequently transferred to the molecular H2-evolution catalyst. Involvement of the photoexcited PDI' enables effective redox separation between the electrons at the reduced catalyst and the holes at the valence band of p-Si. The heterojunction photocathode was used in a tandem cell by coupling with a dye-sensitized photoanode for solar-driven water splitting into H2 and O2.

Crossing the bridge from molecular catalysis to a heterogenous electrode in electrocatalytic water oxidation.

Significant progress has been made in designing single-site molecular Ru(II)-polypyridyl-aqua catalysts for homogenous catalytic water oxidation. Surface binding and transfer of the catalytic reactivity onto conductive substrates provides a basis for heterogeneous applications in electrolytic cells and dye-sensitized photoelectrosynthesis cells (DSPECs). Earlier efforts have focused on phosphonic acid (-PO3H2) or carboxylic acid (-CO2H) bindings on oxide surfaces. However, issues remain with limited surface stabilities, especially in aqueous solutions at higher pH under conditions that favor water oxidation by reducing the thermodynamic barrier and accelerating the catalytic rate using atom-proton transfer (APT) pathways. Here, we address the problem by combining silane surface functionalization and surface reductive electropolymerization on mesoporous, nanofilms of indium tin oxide (ITO) on fluorine-doped tin oxide (FTO) substrates (FTO|nanoITO). FTO|nanoITO electrodes were functionalized with vinyltrimethoxysilane (VTMS) to introduce vinyl groups on the electrode surfaces by silane attachment, followed by surface electropolymerization of the vinyl-derivatized complex, [RuII(Mebimpy)(dvbpy)(OH2)]2+ (12+; Mebimpy: 2,6-bis(1-methyl-1H-benzo[d]imidazol-2-yl)pyridine; dvbpy: 5,5'-divinyl-2,2'-bipyridine), in a mechanism dominated by a grafting-through method. The surface coverage of catalyst 12+ was controlled by the number of electropolymerization cycles. The combined silane attachment/cross-linked polymer network stabilized 12+ on the electrode surface under a variety of conditions especially at pH > ∼6. Surface-grafted poly12+ was stable toward redox cycling at pH ∼ 7.5 over an ∼4-h period. Sustained heterogeneous electrocatalytic water oxidation by the electrode gave steady-state currents for at least ∼6 h with a Faradaic efficiency of ∼68% for O2 production.

Stabilization of Ruthenium(II) Polypyridyl Chromophores on Mesoporous TiO2 Electrodes: Surface Reductive Electropolymerization and Silane Chemistry.

Stabilization is a critical issue in the long term operation of dye-sensitized photoelectrosynthesis cells (DSPECs) for water splitting or CO2 reduction. The cells require a stable binding of the robust molecular chromophores, catalysts, and chromophore/catalyst assemblies on metal oxide semiconductor electrodes under the corresponding (photoelectro)chemical conditions. Here, an efficient stabilization strategy is presented based on functionalization of FTO|nanoTiO2 (mesoporous, nanostructured TiO2 deposited on fluorine-doped tin oxide (FTO) glass) electrodes with a vinylsilane followed by surface reductive electropolymerization of a vinyl-derivatized Ru(II) polypyridyl chromophore. The surface electropolymerization was dominated by a grafting-through mechanism, and rapidly completed within minutes. Chromophore surface coverages were controlled up to three equivalent monolayers by the number of electropolymerization cycles. The silane immobilization and cross-linked polymer network produced highly (photo)stabilized chromophore-grafted FTO|nanoTiO2 electrodes. The electrodes showed significant improvements over structures based on atomic layer deposition and polymer dip-coating stabilization methods in a wide pH range from pH ≈ 1 to pH ≈ 12.5 under both dark and light conditions. Under illumination, with hydroquinone added as a sacrificial electron transfer donor, a photoresponse for sustained electron transfer mediation occurred for at least ∼20 h in a pH ≈ 7.5 phosphate buffer (0.1 M NaH2PO4/Na2HPO4, with 0.5 M NaClO4). The overall procedure provides an efficient way to fabricate highly stabilized molecular assemblies on electrode surfaces with potential applications for DSPECs in solar fuels.

Stable Molecular Surface Modification of Nanostructured, Mesoporous Metal Oxide Photoanodes by Silane and Click Chemistry.

Binding functional molecules to nanostructured mesoporous metal oxide surfaces provides a way to derivatize metal oxide semiconductors for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The commonly used anchoring groups, phosphonates and carboxylates, are unstable as surface links to oxide surfaces at neutral and high pH, leading to rapid desorption of appended molecules. A synthetically versatile molecular attachment strategy based on initial surface modification with a silyl azide followed by click chemistry is described here. It has been used for the stable installation of surface-bound metal complexes. The resulting surfaces are highly stabilized toward complex loss with excellent thermal, photochemical, and electrochemical stabilities. The procedure involves binding 3-azidopropyltrimethoxysilane (APTMS) to nanostructured mesoporous TiO2 or tin-doped indium oxide (ITO) electrodes by silane attachment followed by azide-terminated, Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions with an alkyne-derivatized ruthenium(II) polypyridyl complex. The chromophore-modified electrodes display enhanced photochemical and electrochemical stabilities compared to phosphonate surface binding with extended photoelectrochemical oxidation of hydroquinone for more than ∼6 h with no significant decay.

Charge Transfer from Upconverting Nanocrystals to Semiconducting Electrodes: Optimizing Thermodynamic Outputs by Electronic Energy Transfer.

Light-harvesting inorganic nanocrystals play an important role in emerging solar energy conversion and optoelectronic devices. We describe here a strategy for a new family of photoelectrodes with upconverting nanocrystal assemblies as the photosensitizer. The assemblies consist of oleic acid-capped cadmium selenide (CdSe) nanocrystals that coordinate directly onto a layer of surface-bound, carboxylic acid-derivatized anthracenes through displacement of the oleic acid capping ligands. Steady-state emission and transient absorption measurements show that the upconverting nanocrystal assemblies, selectively excited by green light, generate singlet excitons that enable efficient charge injection into both the conduction band of TiO2 at the photoanode and the valence band of NiO at the photocathode. The singlet excitons form by sensitized triplet-triplet annihilation within the compact layer of anthracenes on the electrode surfaces. Density of state analysis reveals that the electronic coupling between the anthracene singlet excited states and the oxides provides a thermodynamic basis for light-induced charge transfer. The interplay between the excited-state populations at the surface-bound molecules and the assembled nanocrystals presents new design rules that can potentially overcome the limitations of previous dye-sensitized photoelectrochemical cells for catalytic applications.

A Molecular Silane-Derivatized Ru(II) Catalyst for Photoelectrochemical Water Oxidation.

Photoanodes in dye-sensitized photoelectrosynthesis cells integrate molecular chromophore/catalyst assemblies on mesoporous n-type metal oxide electrodes for light-driven water oxidation. One limitation for sustainable photoanodes is the stability of chromophore/catalyst assembly on electrode surfaces for long periods. Progress has been made in stabilizing chromophores based on atomic layer deposition, polymer dip coating, C-C cross-coupling by electropolymerization, and silane surface binding, but little progress has been made on catalyst stabilization. We report here the silane-derivatized catalyst, Ru(bda)(L)2 (bda = 2,2'-bipyridine-6,6'-dicarboxylate, L = 4-(6-(triethoxysilyl)hexyl)pyridine), catalyst 1, which is stabilized on metal oxide electrode surfaces over an extended pH range. A surface stabilization study shows that it maintains its reactivity on the electrode surface toward electrochemical oxidation over a wide range of conditions. Its electrochemical stability on electrode surfaces has been systematically evaluated, and its role as a catalyst for water oxidation has been explored. On surfaces of mesoporous nanostructured core/shell SnO2/TiO2, with a TiO2 stabilized inner layer of the Ru(II) polypyridyl chromophore, [Ru(4,4'-(PO3H2)2bpy)(bpy)2]2+ (RuP2+; bpy = 2,2'-bipyridine), highly efficient photoelectrochemical water oxidation catalysis occurs to produce O2 with a maximum efficiency of ∼1.25 mA/cm2. Long-term loss of catalytic activity occurs with time owing to catalyst loss from the electrode surface by axial ligand dissociation in the high oxidation states of the catalyst.

Stabilized photoanodes for water oxidation by integration of organic dyes, water oxidation catalysts, and electron-transfer mediators.

Stabilized photoanodes for light-driven water oxidation have been prepared on nanoparticle core/shell electrodes with surface-stabilized donor-acceptor chromophores, a water oxidation catalyst, and an electron-transfer mediator. For the electrode, fluorine-doped tin oxide FTO|SnO2/TiO2|-Org1-|1.1 nm Al2O3|-RuP2+-WOC (water oxidation catalyst) with Org1 (1-cyano-2-(4-(diphenylamino)phenyl)vinyl)phosphonic acid), the mediator RuP2+ ([Ru(4,4-(PO3H2)2-2,2-bipyridine)(2,2-bipyridine)2]2+), and the WOC, Ru(bda)(py(CH2)(3or10)P(O3H)2)2 (bda is 2,2-bipyridine-6,6-dicarboxylate with x = 3 or 10), solar excitation resulted in photocurrents of ∼500 µA/cm2 and quantitative O2 evolution at pH 4.65. Related results were obtained for other Ru(II) polypyridyl mediators. For the organic dye PP (5-(4-(dihydroxyphosphoryl)phenyl)-10,15,20-Tris(mesityl)porphyrin), solar water oxidation occurred with a driving force near 0 V.

Controlling Vertical and Lateral Electron Migration Using a Bifunctional Chromophore Assembly in Dye-Sensitized Photoelectrosynthesis Cells.

Integration of photoresponsive chromophores that initiate multistep catalysis is essential in dye-sensitized photoelectrosynthesis cells and related devices. We describe here an approach that incorporates a chromophore assembly surface-bound to metal oxide electrodes for light absorption with an overlayer of catalysts for driving the half-reactions of water splitting. The assembly is a combination of a core-twisted perylene diimide and a ruthenium polypyridyl complex. By altering the connection sequence of the two subunits in the assembly, in their surface-binding to either TiO2 or NiO, the assembly can be tuned to convert visible light into strongly oxidizing equivalents for activation of an electrodeposited water oxidation catalyst (NiCo2O x) at the photoanode, or reducing equivalents for activation of an electrodeposited water reduction catalyst (NiMo0.05S x) at the photocathode. A key element in the design of the photoelectrodes comes from the synergistic roles of the vertical (interlayer) charge transfer and lateral (intralayer) charge hopping in determining overall cell efficiencies for photoelectrocatalysis.

Layer-by-Layer Molecular Assemblies for Dye-Sensitized Photoelectrosynthesis Cells Prepared by Atomic Layer Deposition.

In a dye sensitized photoelectrosynthesis cell (DSPEC), the relative orientation of the catalyst and chromophore plays an important role in determining the device efficiency. Here we introduce a new, robust atomic layer deposition (ALD) procedure for the preparation of molecular chromophore-catalyst assemblies on wide bandgap semiconductors. In this procedure, solution deposited, phosphonate derivatized metal complexes on metal oxide surfaces are treated with reactive metal reagents in the gas phase by ALD to form an outer metal ion bridging group, which can bind a second phosphonate containing species from solution to establish a R1-PO2-O-M-O-PO2-R2 type surface assembly. With the ALD procedure, assemblies bridged by Al(III), Sn(IV), Ti(IV), or Zr(IV) metal oxide units have been prepared. To evaluate the performance of this new type of surface assembly, intra-assembly electron transfer was investigated by transient absorption spectroscopy, and light-driven water splitting experiments under steady-state illumination were conducted. A SnO2 bridged assembly on SnO2/TiO2 core/shell electrodes undergoes light-driven water oxidation with an incident photon to current efficiency (IPCE) of 17.1% at 440 nm. Light-driven water reduction with a ruthenium trisbipyridine chromophore and molecular Ni(II) catalyst on NiO films was also used to produce H2. Compared to conventional solution-based procedures, the ALD approach offers significant advantages in scope and flexibility for the preparation of stable surface structures.

Modulating Hole Transport in Multilayered Photocathodes with Derivatized p-Type Nickel Oxide and Molecular Assemblies for Solar-Driven Water Splitting.

For solar water splitting, dye-sensitized NiO photocathodes have been a primary target. Despite marginal improvement in performance, limitations remain arising from the intrinsic disadvantages of NiO and insufficient catalysis. We report here a new approach to modifying NiO photocathodes with doped NiO bilayers and an additional layer of macro-mesoporous ITO. The trilayered electrode is functionalized with a surface-attached ruthenium polypyridyl dye and a covalently bridged nickel-based hydrogen evolution catalyst. The NiO film, containing a 2% K+-doped NiO inner layer and a 2% Cu2+-doped NiO outer layer, provides sufficient driving force for hole transport following hole injection by the molecular assembly. Upon light irradiation, the resulting photocathode generates hydrogen from water sustainably with enhanced photocurrents and a Faradaic efficiency of ∼90%. This approach highlights the value of modifying both the internal and surface structure of NiO and provides insights into a new generation of dye-sensitized photocathodes for solar-driven water splitting cells.

Fluoropolymer-Stabilized Chromophore-Catalyst Assemblies in Aqueous Buffer Solutions for Water-Oxidation Catalysis.

Here, the application of the fluorinated polymer [Dupont AF, a copolymer of 4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole and tetrafluoroethylene] is described in stabilizing phosphonate-derivatized molecular assemblies on oxide electrodes. In the procedure, the polymer was dip-coated onto the surfaces of oxide electrodes with pre-bound, phosphonate-derivatized chromophores and assemblies, including assemblies for water oxidation. The results of the experiments showed a high degree of stabilization by the added polymer and a demonstration of its use in stabilizing surface-bound assemblies for water-oxidation catalysis.