Influence of the Template Layer on the Structure and Ferroelectric Properties of PbZr0.52Ti0.48O3 Films.

The microstructure of the PbZr0.52Ti0.48O3 (PZT) films is known to influence the ferroelectric properties, but so far mainly the effect of the deposition conditions of the PZT has been investigated. To our knowledge, the influence of the underlying electrode layer and the mechanisms leading to changes in the PZT microstructure have not been explored. Using LaNiO3 (LNO) as the bottom electrode material, we investigated the evolution of the PZT microstructure and ferroelectric properties for changing LNO pulsed-laser deposition conditions. The explored deposition conditions were the O2 pressure, total pressure, and thickness of the electrode layer. Increasing both the O2 pressure and the thickness of the electrode layer changes the growth of PZT from a smooth, dense film to a rough, columnar film. We explain the origin of the change in PZT microstructure as the increased roughness of the electrode layer in relaxing the misfit strain. The strain relaxation mechanism is evidenced by the increase in the crystal phase with bulk LNO unit cell dimensions in comparison to the crystal phase with substrate-clamped unit cell dimensions. We explain the change from a dense to a columnar microstructure as a result of the change in the growth mode from Frank-van der Merwe to Stranski-Krastanov. The ferroelectric properties of the columnar films are improved compared to those of the smooth, dense films. The ability to tune the ferroelectric properties with the microstructure is primarily relevant for ferroelectric applications such as actuators and systems for energy harvesting and storage.

Fourier transform and grating-based spectroscopy with a mid-infrared supercontinuum source for trace gas detection in fruit quality monitoring.

We present a multi-species trace gas sensor based on a fast, compact home-built Fourier transform spectrometer (FTS) combined with a broadband mid-infrared supercontinuum (SC) source. The spectrometer covers the spectral bandwidth of the SC source (2 - 4 µm) and provides a best spectral resolution of 1 GHz in 6 seconds. It has a detection sensitivity of a few hundred of ppbv Hz-1/2 for different gas species. We study the performance of the developed spectrometer in terms of precision, linearity, long-term stability, and multi-species detection. We use the spectrometer for measuring fruit-produced volatiles under different atmospheric conditions and compare the performance with a previously developed scanning grating-based spectrometer.

Broadband Time-Resolved Absorption and Dispersion Spectroscopy of Methane and Ethane in a Plasma Using a Mid-Infrared Dual-Comb Spectrometer.

Conventional mechanical Fourier Transform Spectrometers (FTS) can simultaneously measure absorption and dispersion spectra of gas-phase samples. However, they usually need very long measurement times to achieve time-resolved spectra with a good spectral and temporal resolution. Here, we present a mid-infrared dual-comb-based FTS in an asymmetric configuration, providing broadband absorption and dispersion spectra with a spectral resolution of 5 GHz (0.18 nm at a wavelength of 3333 nm), a temporal resolution of 20 µs, a total wavelength coverage over 300 cm-1 and a total measurement time of ~70 s. We used the dual-comb spectrometer to monitor the reaction dynamics of methane and ethane in an electrical plasma discharge. We observed ethane/methane formation as a recombination reaction of hydrocarbon radicals in the discharge in various static and dynamic conditions. The results demonstrate a new analytical approach for measuring fast molecular absorption and dispersion changes and monitoring the fast dynamics of chemical reactions over a broad wavelength range, which can be interesting for chemical kinetic research, particularly for the combustion and plasma analysis community.

Sensitive multi-species trace gas sensor based on a high repetition rate mid-infrared supercontinuum source.

We present a multi-species trace gas sensor based on a high-repetition-rate mid-infrared supercontinuum source, in combination with a 30 m multipass absorption cell, and a scanning grating spectrometer. The output of the spectrometer is demodulated by a digital lock-in amplifier, referenced to the repetition rate of the supercontinuum source. This improved the detection sensitivity of the system by a factor 5, as compared to direct baseband operation. The spectrometer provides a spectral coverage of 950 cm-1 (between 2.85-3.90 µm) with a resolution of 2.5 cm-1 in 100 ms. It can achieve noise equivalent detection limits in the order of 100 ppbv Hz-1/2 for various hydrocarbons, alcohols, and aldehydes.

Additively Manufactured NiTi and NiTiHf Alloys: Estimating Service Life in High-Temperature Oxidation.

In this study, the effect of the addition of Hf on the oxidation behavior of NiTi alloy, which was processed using additive manufacturing and casting, is studied. Thermogravimetric analyses (TGA) were performed at the temperature of 500, 800, and 900 °C to assess the isothermal and dynamic oxidation behavior of the Ni50.4Ti29.6Hf20 at.% alloys for 75 h in dry air. After oxidation, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to analyze the oxide scale formed on the surface of the samples during the high-temperature oxidation. Two stages of oxidation were observed for the NiTiHf samples, an increasing oxidation rate during the early stage of oxidation followed by a lower oxidation rate after approximately 10 h. The isothermal oxidation curves were well matched with a logarithmic rate law in the initial stage and then by parabolic rate law for the next stage. The formation of multi-layered oxide was observed for NiTiHf, which consists of Ti oxide, Hf oxide, and NiTiO3. For the binary alloys, results show that by increasing the temperature, the oxidation rate increased significantly and fitted with parabolic rate law. Activation energy of 175.25 kJ/mol for additively manufactured (AM) NiTi and 60.634 kJ/mol for AM NiTiHf was obtained.

Nanoscale piezoelectric surface modulation for adaptive extreme ultraviolet and soft x-ray optics.

Extreme ultraviolet and soft x-ray wavelengths have ever-increasing applications in photolithography, imaging, and spectroscopy. Adaptive schemes for wavefront correction at such a short wavelength range have recently gained much attention. In this Letter we report, to the best of our knowledge, the first demonstration of a functional actuator based on piezoelectric thin films. We introduce a new approach that allows producing a gradually varying surface deformation. White light interferometery is used to show the level of control in generating arbitrary surface profiles at the nanoscale.

Application of NiTi in Assistive and Rehabilitation Devices: A Review.

Shape memory alloys (SMAs) have found widespread applications as biomedical devices. Biocompatibility, corrosion resistance, and ductility make these alloys attractive for medical devices such as stents and filters. For these implants, the superelastic property is the primary function of SMAs. Additionally, these alloys, such as NiTi as the prime example, can be used for actuation. Several modes of actuation such as displacement control, force control, and compliance control have been used as harnesses with SMA devices. These two unique properties have opened another application in the form of neurosurgery and robot-assisted surgery devices, as well as controlled assistive and rehabilitation devices. This paper reviews the state of the art of application of SMAs in the latter category where control is applied to harness innovative medical devices. To this end, two major subsets of these devices: prosthesis and orthosis which take the advantage of SMAs in assistive and rehabilitation devices are studied. These devices are further categorized to hand prosthetics, elbow, knee and ankle orthotics. In most of these designs, SMA wires act as artificial muscles to mimic the motion of limbs in the target joints. The evolution of each category is explained, and the specific results of them are reported. The paper also reviews the SMA applications for neurological and neuromuscular rehabilitation. To this end, different categories of rehabilitation devices as a passive and aided exercise for the ankle, knee, and elbow are highlighted. The SMA actuator in these devices can be EMG-controlled to improved patient outcome. In addition to providing a comprehensive overview of the biomedical devices, this paper identifies several possible future directions of SMA related research in the area of assistive and rehabilitation devices.

The role of anterior cruciate ligament in the control of posture; possible neural contribution.

The anterior cruciate ligament (ACL) is not only a mechanical structure for knee joint stability but is also a source of sensory information which could be used in the control of standing posture. It has been shown that the center of pressure (COP) time series during normal standing may be decomposed into two components which are hypothetically governed by different neural mechanisms, namely rambling and trembling. The aim of the present study was to investigate to what extent an injury to the ACL structure would affect these two control mechanisms. In this study the balance of a group of ACL deficient (ACLD) patients during double and single leg standing was examined and compared with that of a group of healthy individuals. We not only calculated the traditional measures of COP, but also decomposed this complex signal to investigate if ACL deficiency would affect the rambling and trembling components differently. The results showed that rambling was not significantly different between the two groups; however the trembling component was significantly greater for the ACLD group in both the single leg and the double leg condition. Further, there was also a component (rambling/trembling) by direction (anterior-posterior/mediolateral) interaction for both groups, indicating that the rambling component exhibited differences between directions of sway whereas the trembling component did not. This study provided evidence that the two components of postural control are differently affected by ACL deficiency, and that the rambling component is influenced by direction of sway.

Inter-Segmental Coordination Pattern in Patients with Anterior Cruciate Ligament Deficiency during a Single-Step Descent.

Anterior cruciate ligament injury is a debilitating pathology which may alter lower limb coordination pattern in both intact and affected lower extremities during activities of daily living. Emerging evidence supports the notion that kinematic variables may not be a good indicator to differentiate patients with anterior cruciate ligament deficiency during step descent task. The aim of the present study was to examine alterations in kinematics as well as coordination patterns and coordination variability of both limbs of these patients during a single step descent task. Continuous relative phase technique was used to measure coordination pattern and coordination variability between a group of anterior cruciate ligament deficient (n = 23) and a healthy control group (n = 23). A third order polynomial Curve fitting was utilized to provide a curve that best fitted to the data points of coordination pattern and coordination variability of the healthy control group. This was considered as a reference to compare to that of patient group using nonlinear regression analysis. The results of the present study demonstrated an altered coordination pattern of the supporting shank-thigh and the stepping foot-shank couplings in anterior cruciate ligament deficient subjects. It was further noticed that there was an increased coordination variability in foot-shank and shank-thigh couplings of both supporting and stepping legs. There was no significant difference in the hip, knee and ankle joints kinematics in either side of these patients. Anterior cruciate ligament deficient individuals showed altered strategies in both intact and affected legs, with increased coordination variability. Kinematic data did not indicate any significant difference between the two groups. It could be concluded that more sophisticated dynamic approach such as continuous relative phase would uncover discrepancies between the healthy and anterior cruciate ligament deficient individuals.