RESUMO
Biomining using microalgae has emerged as a sustainable option to extract rare earth elements (REEs). This study aims to (i) explore the capability of REEs recovery from bauxite by microalgae, (ii) assess the change of biochemical function affected by bauxite, and (iii) investigate the effects of operating conditions (i.e., aeration rate, pH, hydraulic retention time) to REEs recovery. The results showed that increasing bauxite in microalgae culture increases REEs recovery in biomass and production of biochemical compounds (e.g., pigments and Ca-Mg ATPase enzyme) up to 10 %. The optimum pulp ratio of bauxite in the microalgae culture ranges from 0.2 % to 0.6 %. Chlorella vulgaris was the most promising, with two times higher in REEs recovery in biomass than the other species. REEs accumulated in microalgae biomass decreased with increasing pH in the culture. This study establishes a platform to make the scaling up of REEs biomining by microalgae plausible.
Assuntos
Óxido de Alumínio , Biomassa , Metais Terras Raras , Microalgas , Metais Terras Raras/metabolismo , Microalgas/metabolismo , Concentração de Íons de Hidrogênio , Chlorella vulgaris/metabolismoRESUMO
Biogas slurry from anaerobic digestion is rich in nutrients but has not been fully utilized due to a high content of suspended solids (SS) causing clogging during agricultural irrigation. This study aimed to evaluate the performance of a novel chitosan and polyferric sulfate (CTS-PFS) composite coagulant for simultaneous flocculation and floatation to enhance SS removal while preserving nutrients in biogas slurry. Orthogonal method was used for experimental design to determine the optimal synthesis and operational conditions of CTS-PFS. Results show that CTS-PFS outperformed individual CTS and PFS coagulant in terms of SS removal and nutrient (nitrogen, phosphorus, and potassium) preservation. Compared to individual CTS and PFS coagulation, the combination of CTS and PFS at the mass ratio of 1:6 showed significantly higher performance by 41.5 % increase in SS removal and 5.2 % reduction in nutrient loss. The improved performance of CTS-PFS was attributed to its formation of polynuclear hydroxyl complexes with ferric oxide groups (e.g. Fe-OH, Fe-O-Fe, Fe-OH-Fe and COO-Fe) to strengthen charge neutralization and adsorption bridging. Data from this study further confirm that CTS-PFS enhanced the removal of small suspended particles and dissolved organic matter in the molecular weight range of 0.4-2.0 kDa and preserved ammonia and potassium better in biogas slurry. Bubbles were generated as hydrogen ions from coagulant hydrolysis interacted with bicarbonate and carbonate in biogas slurry for removing the produced flocs by floatation. Floc flotation was more effective in CTS-PFS coagulation due to the significant production of uniform bubbles, evidenced by the reduction in the viscosity of biogas slurry.
Assuntos
Biocombustíveis , Quitosana , Floculação , Quitosana/química , Compostos Férricos/química , Eliminação de Resíduos Líquidos/métodos , Fósforo/química , Nitrogênio/químicaRESUMO
This study evaluates the repurposing of expired isopropanol (IPA) COVID-19 disinfectant (64% w/w) to pretreat algal biomass for enhancing methane (CH4) yield. The impact of harvesting methods (centrifugation and polymer flocculation) and microwave pretreatment on CH4 production from Scenedesmus sp. microalgal biomass were also investigated. Results show minimal impact of harvesting methods on the CH4 yield, with wet centrifuged and polymer-harvested biomass exhibiting comparable and low CH4 production at 66 and 74 L/kgvolatile solid, respectively. However, microalgae drying significantly increased CH4 yield compared to wet biomass, attributed to cell shrinkage and enhanced digestibility. Consequently, microwave and IPA pretreatment significantly enhanced CH4 production when applied to dried microalgae, yielding a 135% and 212% increase, respectively, compared to non-pretreated wet biomass. These findings underscore the advantage of using dried Scenedesmus sp. over wet biomass and highlight the synergistic effect of combining oven drying with IPA treatment to boost CH4 production whilst reducing COVID-19 waste.
Assuntos
Biomassa , COVID-19 , Desinfetantes , Metano , Scenedesmus , Scenedesmus/efeitos dos fármacos , Desinfetantes/farmacologia , Metano/metabolismo , COVID-19/prevenção & controle , Microalgas/efeitos dos fármacos , Polímeros/química , Polímeros/farmacologia , 2-Propanol/farmacologia , 2-Propanol/química , SARS-CoV-2/efeitos dos fármacosRESUMO
Building a heterojunction is a fascinating option to guarantee sufficient carrier separation and transfer efficiency, but the mechanism of charge migration at the heterojunction interface has not been thoroughly studied. Herein, MIL-53(Fe)/Bi4O5I2 photocatalyst with a Z-scheme heterojunction structure is constructed, which achieves efficient photocatalytic decontamination under solar light. Driven by the newly-built internal electric field (IEF), the formation of Fe-O-Bi electron migration channel allows for rapid separation and transfer of charge carriers at the heterojunction interface, confirmed by the material characterization and density functional theory (DFT) calculation. The narrower band gap and improved visible light response also contribute to the enhanced photocatalytic activity of composite materials. With levofloxacin as the target pollutant, the optimal MIL-53(Fe)/Bi4O5I2 achieves complete removal of pollutant within 150 min, the photocatalysis rate of which is ca. 4.4 and 26.0 times that of pure Bi4O5I2 and MIL-53(Fe), respectively. Simultaneously, the optimal composite material exhibits satisfactory photodegradation of seven fluoroquinolones, and the photocatalysis rates are as follows: lomefloxacin > ciprofloxacin > enrofloxacin > norfloxacin > pefloxacin > levofloxacin > marbofloxacin. DFT calculations reveal a positive relationship between degradation rate and Fukui index (ƒ0) of main carbon atoms in seven fluoroquinolones. This study sheds light on the existence of electron migration channels at Z-scheme heterojunction interface to ensure sufficient photoinduced carrier transfer, and reveals the influence of pollutant structure on photolysis rate.
RESUMO
Composting is widely used for organic waste management and is also a major source of nitrous oxide (N2O) emission. New insight into microbial sources and sinks is essential for process regulation to reduce N2O emission from composting. This study used genome-resolved metagenomics to decipher the genomic structures and physiological behaviors of individual bacteria for N2O sources and sinks during composting. Results showed that several nosZ-lacking denitrifiers in feedstocks drove N2O emission at the beginning of the composting. Such emission became negligible at the thermophilic stage, as high temperatures inhibited all denitrifiers for N2O production except for those containing nirK. The nosZ-lacking denitrifiers were notably enriched to increase N2O production at the cooling stage. Nevertheless, organic biodegradation limited energy availability for chemotaxis and flagellar assembly to restrain nirKS-containing denitrifiers for nitrate reduction toward N2O sources but insignificantly interrupt norBC- and nosZ-containing bacteria (particularly nosZ-containing nondenitrifiers) for N2O sinks by capturing N2O and nitric oxide (NO) for energy production, thereby reducing N2O emission at the mature stage. Furthermore, nosZII-type bacteria included all nosZ-containing nondenitrifiers and dominated N2O sinks. Thus, targeted strategies can be developed to restrict the physiological behaviors of nirKS-containing denitrifiers and expand the taxonomic distribution of nosZ for effective N2O mitigation in composting.
Assuntos
Compostagem , Óxido Nitroso , Óxido Nitroso/metabolismo , Bactérias/metabolismoRESUMO
Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Esgotos/química , Biossólidos , Solo , Água , Fluorocarbonos/análise , Poluentes Químicos da Água/análiseRESUMO
Atmospheric water harvesting (AWH) is considered one of the promising technologies to alleviate the uneven-distribution of water resources and water scarcity in arid regions of the world. Hydrogel-based AWH materials are currently attracting increasing attention due to their low cost, high energy efficiency and simple preparation. However, there is a knowledge gap in the screening of hydrogel-based AWH materials in terms of structure-property relationships, which may increase the cost of trial and error in research and fabrication. In this study, we synthesised a variety of hydrogel-based AWH materials, characterized their physochemcial properties visualized the electrostatic potential of polymer chains, and ultimately established the structure-property-application relationships of polymeric AWH materials. Poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) hydrogel is able to achieve an excellent water adsorption capacity of 0.62â g g-1 and a high water desorption efficiency of more than 90 % in relatively low-moderate humidity environments, which is regarded as one of the polymer materials with potential for future AWH applications.
RESUMO
This study reports a facile technique to synthesize and tune the cationic polymer, poly(3-acrylamidopropyl)trimethylammonium chloride (PAPTAC), in terms of molecular weight and surface change for harvesting three microalgae species (Scenedesmus sp., P.purpureum, and C. vulgaris). The PAPTAC polymer was synthesised by UV-induced free-radical polymerisation. Polymer tuning was demonstrated by regulating the monomer concentration (60 to 360 mg/mL) and UV power (36 and 60 W) for polymerisation. The obtained PAPTAC polymer was evaluated for harvesting three different microalgae species and compared to a commercially available polymer. The highest flocculation efficiency for Scenedesmus sp. and P. purpureum was observed at a dosage of 25 mg-polymer/g of dry biomass by using PAPTAC-90, resulting in higher flocculation efficiency than the commercial polymer. Results in this study show evidence of effective neutralisation of the negative charge surface of microalgae cells by the produced cationic PAPTAC polymer and polymer bridging for effective flocculation. The obtained PAPTAC polymer was less effective for harvesting C. vulgaris, possibly due to other factors such as cell morphology and composition of extracellular polymeric substances of at the cell membrane that may also influence harvesting performance.
Assuntos
Microalgas , Scenedesmus , Polímeros/metabolismo , Cátions/metabolismo , Floculação , BiomassaRESUMO
The interplay between CO2 input and light intensity is investigated to provide new insight to optimise microalgae growth rate in photobioreactors for environmental remediation, carbon capture, and biomass production. Little is known about the combined effect of carbon metabolism and light intensity on microalgae growth. In this study, carbonated water was transferred to the microalgae culture at different rates and under different light intensities for observing the carbon composition and growth rate. Results from this study reveal opposing effects from CO2 input and light intensity on the culture solution pH and ultimately microalgae growth rate. Excessive CO2 concentration can inhibit microalgae growth due to acidification caused by CO2 dissolution. While increasing light intensity can increase pH because the carboxylation process consumes photons and transfers hydrogen ions into the cell. This reaction is catalysed by the enzyme RuBisCO, which functions optimally within a specific pH range. By balancing CO2 input and light intensity, high microalgae growth rate and carbon capture could be achieved. Under the intermittent CO2 transfer mode, at the optimal condition of 850 mg/L CO2 input and 1089 µmol/m2/s light intensity, leading to the highest microalgae growth rate and carbon fixation of 4.2 g/L as observed in this study.
RESUMO
This study aims to reveal the underlying mechanisms of mature compost addition for improving organic waste composting. Composting experiments and metagenomic analysis were conducted to elucidate the role of mature compost addition to regulate microbial metabolisms and physiological behaviors for composting amelioration. Mature compost with or without inactivation pretreatment was added to the composting of kitchen and garden wastes at 0%, 5%, 10%, 15%, and 20% (by wet weight) for comparison. Results show that mature compost promoted pyruvate metabolism, tricarboxylic acid (TCA) cycle, and oxidative phosphorylation to produce heat and energy to accelerate temperature increase for composting initiation and biological contaminant removal (>78%) for pasteurization. Energy requirement drives bacterial chemotactic motility towards nutrient-rich regions to sustain organic biodegradation. Nevertheless, when NADH formation exceeded NAD+ regeneration in oxidative phosphorylation, TCA cycle was restrained to limit continuous temperature increase and recover high intracellular NAD+/NADH ratio to secure stable oxidation reactions.
Assuntos
Compostagem , NAD , Ciclo do Ácido Cítrico , Biodegradação Ambiental , Oxirredução , SoloRESUMO
This study tracked the fate of nine detected heavy metals in an industrial swine farm with integrated waste treatment, including anoxic stabilization, fixed-film anaerobic digestion, anoxic-oxic (A/O), and composting. Results show that heavy metals exhibited different transformation behaviors in the treatment streamline with Fe, Zn, Cu and Mn as the most abundant ones in raw swine waste. The overall removal of water-soluble heavy metals averaged at 30 %, 24 % and 42 % by anoxic stabilization, anaerobic digestion and A/O unit, respectively. In particular, anoxic stabilization could effectively remove Cu, Mn and Ni; while A/O unit was highly effective for Fe, Cr and Zn elimination from water-soluble states. As such, the environmental risk of liquid products for agricultural irrigation decreased gradually to the safe pollution level in swine waste treatment. Furthermore, heavy metals in the solid (slurry) phase of these bioprocesses could be immobilized with the passivation rate in the range of 42-70 %. Nevertheless, heavy metals preferably transformed from liquid to biosolids to remain their environmental risks when biosolids were used as organic fertilizer in agriculture, thereby requiring effective strategies to advance their passivation in all bioprocesses, particularly composting as the last treatment unit.
Assuntos
Metais Pesados , Animais , Suínos , Biossólidos , Metais Pesados/análise , Poluição Ambiental , Irrigação Agrícola , Monitoramento Ambiental/métodosRESUMO
This study mapped the fate of antibiotics in a swine farm with integrated waste treatment including anoxic stabilization, fixed-film anaerobic digestion, anoxic-oxic (A/O), and composting. Results show the prevalent and consistent occurrence of 12 antibiotics in swine waste. Mass balance of these antibiotics was calculated to track their flow and evaluate their removal by different treatment units. The integrated treatment train could effectively reduce antibiotic loading to the environment by 90% (measured as combined mass of all antibiotic residues). Within the treatment train, anoxic stabilization as the initial treatment step, accounted for the highest contribution (43%) to overall antibiotic elimination. Results also show that aerobic was more effective than anaerobic regarding antibiotic degradation. Composting accounted for an additional of 31% removal of antibiotics while anaerobic digestion contributed to 15%. After treatment, antibiotic residues in the treated effluent and composted materials were 2 and 8% of the initial antibiotic loading in raw swine waste, respectively. Ecological risk assessment showed negligible or low risk quotient associated with most individual antibiotics released into the aquatic environment or soil from swine farming. Nevertheless, antibiotic residues in treated water and composted materials together showed significant ecological risk to water and soil organisms. Thus, further work to improve treatment performance or develop new technologies is necessary to reduce the impact of antibiotics from swine farming.
Assuntos
Antibacterianos , Compostagem , Animais , Suínos , Agricultura , Fazendas , SoloRESUMO
This study reports a biocatalytic system of immobilized laccase and 3D printed open-structure biopolymer scaffoldings. The scaffoldings were computer-designed and 3D printed using polylactide (PLA) filament. The immobilization of laccase onto the 3D printed PLA scaffolds were optimized with regard to pH, enzyme concentration, and immobilization time. Laccase immobilization resulted in a small reduction in reactivity (in terms of Michaelis constant and maximum reaction rate) but led to significant improvement in chemical and thermal stability. After 20 days of storage, the immobilized and free laccase showed 80% and 35% retention of the initial enzymatic activity, respectively. The immobilized laccase on 3D printed PLA scaffolds achieved 10% improvement in the removal of estrogens from real wastewater as compared to free laccase and showed the significant reusability potential. Results here are promising but also highlight the need for further study to improve enzymatic activity and reusability.
Assuntos
Enzimas Imobilizadas , Águas Residuárias , Estabilidade Enzimática , Enzimas Imobilizadas/metabolismo , Lacase/metabolismo , Poliésteres , Impressão Tridimensional , Concentração de Íons de HidrogênioRESUMO
A novel tertiary magnetic ZnFe2O4/BiOBr/rGO visible light-driven photocatalytic system was successfully synthesized from graphite, bismuth nitrate pentahydrate, iron (III) nitrate, and zinc nitrate precursors. The produced materials were characterized regarding micro-structure, chemical composition and functional groups, surface charge properties, photocatalytic characteristics such as band gap energy (Eg), recombination rate of charge carriers, and magnetic properties. ZnFe2O4/BiOBr/rGO heterojunction photocatalyst exhibited a saturation magnetization of 7.5 emu/g, and a visible light response (Eg = 2.08 eV). Thus, under visible light, these materials could generate effective charge carriers responsible for forming free hydroxyl radicals (HOâ¢) for degrading organic pollutants. ZnFe2O4/BiOBr/rGO also exhibited the lowest charge carriers recombination rate compared to all individual components. The construction of ZnFe2O4/BiOBr/rGO system resulted in 1.35 to 2.55 times higher in photocatalytic degradation of DB 71 compared to individual components. At the optimal conditions (0.5 g/L catalyst load and pH 7.0), the ZnFe2O4/BiOBr/rGO system could completely degrade 30 mg/L DB 71 after 100 min. DB 71 degradation process was best described by the pseudo-first-order model, with the coefficient of determination within the range of 0.9043-0.9946 for all conditions. HO⢠radicals were mainly responsible for degrading the pollutant. The photocatalytic system could be effortlessly regenerated, very stable, which showed an efficiency of >80.0 % after 5 repetitive runs regarding the DB 71 photodegradation. The photocatalyst was easily recovered by a magnet. This research provides a novel approach for producing an effective and practical photocatalyst that can be applied in real organic pollutants-containing waste water treatment systems.
RESUMO
The surface reactivity of biochar derived from waste biomass has not been well understood due to its complex composition and heterogeneity. Therefore, this study synthesized a series of biochar-like hyper-crosslinked polymers (HCPs) with different amounts of phenolic hydroxyl groups on the surface as an indicative tool to investigate the roles of key surface properties of biochar on transforming pollutants being adsorbed. Characterization of HCPs suggested that electron donating capacity (EDC) of different HCPs was positively correlated with increasing amounts of phenol hydroxyl groups, whereas specific surface area, degree of aromatization and graphitization were negatively correlated. It was found that greater amounts of hydroxyl radicals were produced with increasing amounts of hydroxyl groups on the synthesized HCPs. Batch degradation experiments with trichlorophenols (TCPs) suggested that all HCPs could decompose TCP molecules upon contact. The degree of TCP degradation (~45 %) was highest for HCP made from benzene monomer with the lowest amounts of hydroxyl groups, which was likely driven by its greater specific surface area and reactive sites for TCP degradation. Conversely, the degree of TCP degradation (~25 %) by HCPs with the highest hydroxyl group abundance was the lowest, probably because the lower surface area of HCPs had limited TCP adsorption, which led to lower interaction between HCP surface and TCP molecules. The results concluded from the contact of HCPs and TCP suggested both EDC and adsorption capacity of biochar played critical roles in transforming organic pollutants.
Assuntos
Clorofenóis , Poluentes Ambientais , Biomassa , Polímeros , Carvão Vegetal/química , Fenóis , AdsorçãoRESUMO
Nitrofurans are broad-spectrum bactericidal agents used in a large quantity for veterinary and human therapy. This study reports the long-term impact of two nitrofuran representatives, nitrofurantoin (NFT) and furaltadone (FTD) on the bacterial strains Sphingobacterium siyangense FTD2, Achromobacter pulmonis NFZ2, and Stenotrophomonas maltophilia FZD2, isolated from a full-scale wastewater treatment plant. Bacterial whole genome sequencing was used for preliminary strains characterization. The metabolomic, electrochemical, and culture methods were applied to understand changes in the bacterial strains after 12-month exposure to nitrofurans. The most significantly altered metabolic pathways were observed in amino acid and sugar metabolism, and aminoacyl-tRNA biosynthesis. Disrupted protein biosynthesis was measured in all strains treated with antibiotics. Prolonged exposure to NFT and FTD also triggered mutagenic effects, affected metabolic activity, and facilitated oxidative stress within the cells. Nitrofuran-induced oxidative stress was evidenced from an elevated activity of catalase and glutathione S-transferases. NFT and FTD elicited similar but not identical responses in all analyzed strains. The results obtained in this study provide new insights into the potential risks of the prolonged presence of antimicrobial compounds in the environment and contribute to a better understanding of the possible impacts of nitrofuran antibiotics on the bacterial cells.
Assuntos
Demência Frontotemporal , Nitrofuranos , Humanos , Águas Residuárias , Nitrofuranos/análise , Nitrofuranos/metabolismo , Nitrofuranos/farmacologia , Antibacterianos/metabolismo , Bactérias/metabolismoRESUMO
Progress in heterogeneous advanced oxidation processes (AOPs) is hampered by several issues including mass transfer limitation, limited diffusion of short-lived reactive oxygen species (ROS), aggregation of nanocatalysts, and loss of nanocatalysts to treated water. These issues have been addressed in recent studies by executing the heterogeneous AOPs in confinement, especially in the nanopores of catalytic membranes. Under nanoconfinement (preferably at the length of less than 25 nm), the oxidant-nanocatalyst interaction, ROS-micropollutant interaction and diffusion of ROS have been observed to significantly improve, which results in enhanced ROS yield and mass transfer, improved reaction kinetics and reduced matrix effect as compared to conventional heterogenous AOP configuration. Given the significance of nanoconfinement effect, this study presents a critical review of the current status of membrane-based nanoconfined heterogeneous catalysis system for the first time. A succinct overview of the nanoconfinement concept in the context of membrane-based nanofluidic platforms is provided to elucidate the theoretical and experimental findings related to reaction kinetics, reaction mechanisms and molecule transport in membrane-based nanoconfined AOPs vs. conventional AOPs. In addition, strategies to construct membrane-based nanoconfined catalytic systems are explained along with conflicting arguments/opinions, which provides critical information on the viability of these strategies and future research directions. To show the desirability and applicability of membrane-based nanoconfined catalysis systems, performance governing factors including operating conditions and water matrix effect are particularly focused. Finally, this review presents a systematic account of the opportunities and technological constraints in the development of membrane-based nanoconfined catalytic platform to realize effective micropollutant elimination in water treatment.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Espécies Reativas de Oxigênio , Purificação da Água/métodos , Oxirredução , CatáliseRESUMO
Co-culture of microalgae-activated sludge has the potential to purify wastewater while reduce energy demand from aeration. In this work, a mechanically stirred membrane photobioreactor (stirred-MPBR) was used to evaluate the impact of the biomass retention time (BRT) on the treatment performance and membrane fouling. Results showed that stirred-MPBR was affected by BRT during treating domestic wastewater at a flux of 16.5 L m-2 h-1. The highest productivity was attained at BRT 7d (102 mg L-1 d-1), followed by BRT 10d (86 mg L-1 d-1), BRT 5d (85 mg L-1 d-1), and BRT 3d (83 mg L-1 d-1). Statistical analysis results showed that BRT 7d had a higher COD removal rate than BRT 10d, however, there is no difference in total nitrogen removal rate. The highest TP removal occurred when the biomass operated at BRT as short as 3d. Reduced BRTs caused a change in the microalgae-activated sludge biomass fraction that encouraged nitrification activity while simultaneously contributing to a higher fouling rate. The bound protein concentrations dropped from 31.35 mg L-1 (BRT 10d) to 10.67 mg L-1 (BRT 3d), while soluble polysaccharides increased from 0.99 to 1.82 mg L-1, respectively. The concentrations of extracellular polymeric substance fractions were significantly altered, which decreased the mean floc size and contributed to the escalating fouling propensity. At the optimum BRT of 7d, the stirred-MPBR showed sufficient access to light and nutrients exchange for mutualistic interactions between the microalgae and activated sludge.
Assuntos
Microalgas , Águas Residuárias , Fotobiorreatores , Esgotos , Biomassa , Matriz Extracelular de Substâncias Poliméricas/química , Microalgas/metabolismo , Nitrogênio/análiseRESUMO
A novel carbon quantum dots decorated C-doped α-Bi2O3 photocatalyst (CBO/CQDs) was synthesized by solvothermal method. The synergistic effect of adsorption and photocatalysis highly improved contaminants removal efficiencies. The ceftriaxone sodium degradation rate constant (k) of CBO/CQDs was 11.4 and 3.2 times that of pure α-Bi2O3 and C-doped α-Bi2O3, respectively. The interstitial carbon doping generated localized states above the valence band, which enhanced the utilization of visible light and facilitated the separation of photogenerated electrons and holes; the loading of CQDs improved the charge carrier separation and extended the visible light response; the reduced particle size of CBO/CQDs accelerated the migration of photogenerated carriers. The â¢O2 - and h+ were identified as the dominant reactive species in ceftriaxone sodium degradation, and the key role of â¢O2 - was further investigated by NBT transformation experiments. The Fukui index was applied to ascertain the molecular bonds of ceftriaxone sodium susceptible to radical attack, and intermediates analysis was conducted to explore the possible degradation pathways. The toxicity evaluation revealed that some degradation intermediates possessed high toxicity, thus the contaminants require sufficient mineralization to ensure safe discharge. The present study makes new insights into synchronous carbon dopping and CQDs decoration on modification of α-Bi2O3, which provides references for future studies.
RESUMO
Pharmaceutical compounds in aquatic environments have been considered as emerging contaminants due to their potential risks to living organisms. Microalgae-based technology showed the feasibility of removing pharmaceutical contaminants. This review summarizes the occurrence, classification, possible emission sources, and environmental risk of frequently detected pharmaceutical compounds in aqueous environments. The efficiency, mechanisms, and influencing factors for the removal of pharmaceutical compounds through microalgae-based technology are further discussed. Pharmaceutical compounds frequently detected in aqueous environments include antibiotics, hormones, analgesic and non-steroidal anti-inflammatory drugs (NSAIDs), cardiovascular agents, central nervous system drugs (CNS), antipsychotics, and antidepressants, with a concentration ranging from ng/L to µg/L. Microalgae-based technology majorly remove the pharmaceutical compounds through bioadsorption, bioaccumulation, biodegradation, photodegradation, and co-metabolism. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the occurrence and fate of pharmaceutical contaminants in aqueous environments, highlighting the potential of microalgae-based technology for pharmaceutical contaminants removal.