Design of Furan-Based Acceptors for Organic Photovoltaics.

We explore a series of furan-based non-fullerene acceptors and report their optoelectronic properties, solid-state packing, photodegradation mechanism and application in photovoltaic devices. Incorporating furan building blocks leads to the expected enhanced backbone planarity, reduced band gap and red-shifted absorption of these acceptors. Still, their position in the molecule is critical for stability and device performance. We found that the photodegradation of these acceptors originates from two distinct pathways: electrocyclic photoisomerization and Diels-Alder cycloaddition of singlet oxygen. These mechanisms are of general significance to most non-fullerene acceptors, and the photostability depends strongly on the molecular structure. Placement of furans next to the acceptor termini leads to better photostability, well-balanced hole/electron transport, and significantly improved device performance. Methylfuran as the linker offers the best photostability and power conversion efficiency (>14 %), outperforming all furan-based acceptors reported to date and all indacenodithiophene-based acceptors. Our findings show the possibility of photostable furan-based alternatives to the currently omnipresent thiophene-based photovoltaic materials.

Improving Environmental and Operational Stability of Polymer Field-Effect Transistors by Doping with Tetranitrofluorenone.

Operational instability of organic field-effect transistors (OFETs) is one of the key limitations for applications of printed electronics. Environmental species, especially oxygen and water, unintentionally introduced in the OFET channel, can act as either dopants or traps for charge carriers, affecting the electrical characteristics and stability of devices. Here, we report that intentional doping of the benchmark p-type semiconducting polymer (DPP-DTT) with 2,4,5,7-tetranitrofluorenone (TeNF) markedly improves the operational and environmental stability of OFETs. Electrical interrogation of DPP-DTT OFETs in various environments and at variable temperatures shows suppression of electron-induced traps and increase of hole mobility in oxygen-rich environment, while the water molecules act as traps for positive charge carrier, reducing the hole mobility and significantly shifting the threshold voltage. Doping of DPP-DTT with TeNF suppresses both effects, resulting in environmentally independent performance and superior long-term stability of unencapsulated devices for up to 4 months in ambient air. Furthermore, the doped OFETs exhibit dramatically reduced hysteresis and bias-stressed current drop. Such improvement of the environmental and operational stabilities is ascribed to the mitigation of traps induced by the injected minority carrier (electrons) and the reduction of the majority carrier (hole) traps in doped polymer films due to enhanced microstructural order.

Scalable Non-Halogenated Co-solvent System for Large-Area, Four-Layer Slot-Die-Coated Organic Photovoltaics.

Sustainable processing solvents, photoactive materials, and scalable manufacturing will play a key role in commercializing printed organic photovoltaics (OPVs). The record-breaking pioneering OPV reports have done an outstanding job in accelerating the discovery of champion photoactive materials and device engineering practices; however, these works predominantly involve health-hazardous halogenated processing solvents/additives and non-scalable thin-film coating methods. Herein, large-area slot-die-manufactured OPV cells from eco-friendly halogen-free solvents and synthetically scalable materials are showcased. All the four layers; electron transport layer (SnO2), cathode interlayer (PDIN-H), bulk-heterojunction (BHJ, PTQ-10:BTP-4F-12), and hole transport layer [poly(3,4-ethylenedioxythiophene):polystyrene sulfonate) (PEDOT:PSS] are slot-die-coated in air. A non-halogenated co-solvent mixture of toluene and 2-methyl tetrahydrofuran is presented as an optimal processing solvent to realize the high-quality thin films of PTQ10:BTP-4F-12. The unencapsulated champion solar cells characterized in ambient conditions (RH = 30%, T = 22 °C) exhibit power conversion efficiencies (PCEs) of 12.1 and 17.8% under 1 Sun (100 mW/cm2) and indoor light-emitting diode lighting (580 µW/cm2) conditions, respectively. Additionally, PEDOT:PSS is successfully slot-die-coated atop BHJ by mitigating wettability challenges with the aid of surface treatment. The all four-layer slot-die-coated OPVs exhibit a PCE of 9.55%.

A Universal Cosolvent Evaporation Strategy Enables Direct Printing of Perovskite Single Crystals for Optoelectronic Device Applications.

Solution-processed metal halide perovskite (MHP) single crystals (SCs) are in high demand for a growing number of printed electronic applications due to their superior optoelectronic properties compared to polycrystalline thin films. There is an urgent need to make SC fabrication facile, scalable, and compatible with the printed electronic manufacturing infrastructure. Here, a universal cosolvent evaporation (CSE) strategy is presented by which perovskite SCs and arrays are produced directly on substrates via printing and coating methods within minutes at room temperature from drying droplets. The CSE strategy successfully guides the supersaturation via controlled drying of droplets to suppress all crystallization pathways but one, and is shown to produce SCs of a wide variety of 3D, 2D, and mixed-cation/halide perovskites with consistency. This approach works with commonly used precursors and solvents, making it universal. Importantly, the SC consumes the precursor in the droplet, which enables the large-scale fabrication of SC arrays with minimal residue. Direct on-chip fabrication of 3D and 2D perovskite photodetector devices with outstanding performance is demonstrated. The approach shows that any MHP SC can now be manufactured on substrates using precision printing and scalable, high-throughput coating methods.

Mechanism of the Photodegradation of A-D-A Acceptors for Organic Photovoltaics*.

Herein, we elucidate the photodegradation pathway of A-D-A-type non-fullerene acceptors for organic photovoltaics. Using IT-4F as a benchmark example, we isolated the photoproducts and proved them isomers of IT-4F formed by a 6-e electrocyclic reaction between the dicyanomethylene unit and the thiophene ring, followed by a 1,5-sigmatropic hydride shift. This photoisomerization was accelerated under inert conditions, as explained by DFT calculations predicting a triplet-mediated reaction path (quenchable by oxygen). Adding controlled amounts of the photoproduct P1 to PM6:IT-4F bulk heterojunction cells led to a progressive decrease in photocurrent and fill factor attributed to its poor absorption and charge transport properties. The reaction is a general photodegradation pathway for a series of A-D-A molecules with 1,1-dicyanomethylene-3-indanone termini, and its rate varies with the structure of the donor and acceptor moiety.

Nitroaromatics as n-type organic semiconductors for field effect transistors.

The nitro group (NO2) is one of the most common electron-withdrawing groups but it has rarely been used in the design of organic semiconductors (OSCs). Herein, we report the n-type semiconducting behavior of simple fluorenone derivatives functionalized with NO2 and CN groups. While the electron mobilities measured in the thin film field-effect transistors are modest (10-6-10-4 cm2 V-1 s-1), the nitrofluorenone OSCs offer excellent air-stability and remarkable tunability of energy levels via facile modification of the substitution pattern. We study the effect of substituents on the electrochemical properties, molecular and crystal structure, and the charge transport properties of nitrofluorenones to revitalize the underestimated potential of NO2 functionalization in organic electronics.

Strong Enhancement of π-Electron Donor/Acceptor Ability by Complementary DD/AA Hydrogen Bonding.

π-Conjugated organic materials possess a wide range of tunable optoelectronic properties which are dictated by their molecular structure and supramolecular arrangement. While many efforts have been put into tuning the molecular structure to achieve the desired properties, rational supramolecular control remains a challenge. Here, we report a novel series of supramolecular materials formed by the co-assembly of weak π-electron donor (indolo[2,3-a]carbazole) and acceptor (aromatic o-quinones) molecules via complementary hydrogen bonding. The resulting polarization creates a drastic perturbation of the molecular energy levels, causing strong charge transfer in the weak donor-acceptor pairs. This leads to a significant lowering (up to 1.5 eV) of the band gaps, intense absorption in the near-IR region, very short π-stacking distances (≥3.15 Å), and strong ESR signals in the co-crystals. By varying the strength of the acceptor, the characteristics of the complexes can be tuned between intrinsic, gate-, or light-induced semiconductivity with a p-type or ambipolar transport mechanism.