Biomechanical Research of Three Parallel Cannulated Compression Screws in Oblique Triangle Configuration for Fixation of Femoral Neck Unstable Fractures.

OBJECTIVE: Surgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle-aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross-section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application. METHODS: Twenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test. RESULTS: In the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p < 0.05), respectively. Comparison between the femoral head displacement after 10,000 cycles of 700N cyclic loading and total displacement after 20,000 cycles of 700-1400N cyclic loading showed the OTC group was less than the IETC group (p < 0.05). A comparison of femoral head displacement after 10,000 cycles of 1400N and 2100N cycles and total displacement after 30,000 cycles of 700-2100N cycles showed the OTC group was less than another group, but the difference was not significant (p > 0.05). CONCLUSION: When three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight-bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.

[Hemilateral bone longitudinal transport technique for the treatment of hemilateral defects of long bones of lower limbs].

OBJECTIVE: To explore clinical efficacy of Ilizarov hemilateral bone longitudinal transport technique in treating hemilateral bone defects associated with chronic osteomyelitis of lower extremity long bones. METHODS: Clinical data of 13 patients with hemilateral bone defects caused by chronic osteomyelitis of lower extremity long bones and treated by Ilizarov hemilateral bone longitudinal transport technique were retrospective analyzed, including 10 males and 3 female, aged from 14 to 55 years old;4 patients occurred femoral and 9 patients occurred tibial;10 patients were diagnosed as traumatic osteomyelitis and 3 patients as hematogenous osteomyelitis. The anatomical classification of Cierny-Mader in 13 patients was type Ⅲ. Bone and wound healing, postopertaive complication, and bony and functional results were observed by Paley evaluation standard. RESULTS: After removing external fixator, all patients were followed up from 6 to 70 months. Transporting time ranged from 54 to 158 d. And the time in external fixation ranged from 6.8 to 19.5 months. External fixation index (EFI) ranged from 1.23 to 1.6 months/cm. According to Paley's evaluation criteria, bony results were excellent in 13 patients;functional results showed excellent in 12 patients and good in 1 patient. Two patients occurred poor union on the docking sites and healed with autogenous iliac bone graft. The callus at the extended area was poorly mineralized and improved significantly when treated with low-intensity pulsed ultrasound in one patient. All patients had good wound healing without recurrence of osteomyelitis and refracture. There was no vascular and nerve injury and axial deviation in all patients and they were satisfied with the appearance and function of lower limbs. The range of motion of knee and ankle joint before operation was 120 ° to 150 ° and 35 °to 80 ° respectively, and at the latest follow-up was 110 ° to 140 ° and 30 ° to 75 ° . CONCLUSION: Ilizarov hemilateral bone longitudinal transport technique is effective in treating infective hemilateral bone defects of lower extremity long bones, which could not only simplify architecture of external fixation, but also reduce the number of fixation pins, shorten the time in external fixator and decrease the incidence of pin tract infection. However, this technique is highly demanding, and the growth of callus in extended region and healing of bone apposition should be noticed.

[Comparative study of monolateral and circular fixator in the treatment of infectious tibial nonunion].

OBJECTIVE: To compare treatment effect of monolateral and circular external fixator in infectious tibial nonunion and to explore external fixation structure with better osteogenic ability and fewer complications. METHODS: A retrospective analysis was performed on 150 patients with infectious tibial nonunion admitted from January 2010 to December 2014. Patients who met the inclusion and exclusion criteria were divided into monolateral fixator group and circular fixator group according to the type of external fixation. Demographic and perioperative data of the two groups were collected. New bone quality was assessed by pixels ratio, treatment effect was assessed by complications. Notes for treatment was explored by case analysis. RESULTS: A total of 64 patients with infectious mid-tibial nonunion were included, 26 in monolateral fixator group and 38 in circular fixator group. There was no difference in demographic data between two groups. The pixel ratio of new bone between two groups was from 0.91 to 0.97 with an average of (0.94±0.03), and from 0.93 to 0.97 with an average of(0.95±0.02), respectively, with no statistical significance (P>0.05). The external fixation index was from 34.1 to 50.6 with an average of (42.3±8.3) days /cm in monolateral fixator group and from 44.5 to 56.1 with an average of (45.8±10.3) days/cm in the circular fixator group, and the difference was not statistically significant (P>0.05). There were 7 cases (26.9%) of complications in monolateral fixator group and 5 cases (13.2%) in circular fixator group, the difference was not statistically significant (P>0.05), but 5 cases of foot ptosis in monolateral fixator group and none in circular fixator group. The time of weight bearing in monolateral fixator group was later than that in circular fixator group, and the difference was statistically significant (P<0.05). CONCLUSION: Monolateral and circular fixators can achieve equivalent bone formation in the treatment of infected tibial nonunion. Circular fixator is recommended for patients with severe osteoporosis or concomitant medical diseases requiring early weight bearing. Hydroxyapatite coated screws are recommended if a monolateral external fixator is selected when the expected enlarged length is long and the fixation time is long and close monitoring of the ankle movement is required to avoid foot droop.

[Biomechanical study on the treatment of intertrochanteric fracture of A3.3 type with medial sustainable nail and proximal femoral anti-rotation nail].

OBJECTIVE: A3 intertrochanteric fracture is an extremely unstable fracture, which is often treated with intramedullary nail, but the implant failure is common due to the posterior medial fragment cannot be reconstructed. A new medial sustainable nail (MSN-Ⅱ) which can reconstruct the femoral medial support by sustainable screw was introduced in this study. The mechanical effect was verified by biomechanical experiment. METHODS: The loss medial support model of intertrochanteric fracture (A3) was made by artificial Sawbones model, fixed with MSN-Ⅱ and PFNA-Ⅱ, underwent axial loading and axial failure tests. The axial stiffness, yield load, displacement of head-neck fragment and torsional angle of fracture site of these nails were recorded and compared for biomechanical differences. The effect of early reconstruction of medial support with MSN-Ⅱ was determined. RESULTS: The axial stiffness, yield load, the displacement of head and neck fragment when the axial load was 1 800 N and torsional angle of the fracture site after the axial failure test of MSN-Ⅱ were (222.76 ±62.46) N /mm, (4 241.71 ±847.42) N, (11.51 ±0.62) mm, (1.71 ±0.10)° respectively, while the PFNA -Ⅱ was (184.58±40.59) N /mm, (3 058.76±379.63) N, (16.15±1.36) mm, (2.52±0.26)°respectively. The difference between the two groups was statistically significant. CONCLUSION: The axial stiffness of MSN-Ⅱ is better than that of PFNA-Ⅱ. The MSN-Ⅱ can bear more loads when fixed A3.3 intertrochanteric fracture and has greater axial and rotational stability. It is an effective means to reconstruct the medial support of A3 intertrochanteric fracture.

Medial support nail and proximal femoral nail antirotation in the treatment of reverse obliquity inter-trochanteric fractures (Arbeitsgemeinschaft fur Osteosynthesfrogen/Orthopedic Trauma Association 31-A3.1): a finite-element analysis.

BACKGROUND: The reverse obliquity inter-trochanteric fracture is a distinct fracture pattern that is mechanically different from most inter-trochanteric fractures and the optional treatment of it is still controversial. The purpose of this study was to compare differences in the efficacy of a novel nail (medial support nail [MSN-II]) and proximal femoral nail anti-rotation (PFNA-II) in the treatment of reverse obliquity inter-trochanteric fractures (Arbeitsgemeinschaft fur Osteosynthesfrogen/Orthopedic Trauma Association [AO/OTA] 31-A3.1) using finite-element analysis. METHODS: Modeling software was used to establish a three-dimensional model of MSN-II and PFNA-II and an A3.1 inter-trochanteric fracture model. Abaqus software was used to implement different force loads to compare finite-element biomechanical parameters such as the maximum stress in implant and the displacement of fracture site. RESULTS: The femoral stress, implant stress and fracture site displacement of MSN-II was less than that of PFNA-II. The results indicated that the maximal femoral stress was 581 MPa for PFNA-II and 443 MPa for the MSN-II. The maximum stress values in the PFNA-II and MSN-II models were 291 and 241 MPa, respectively. The maximal displacements of the fracture site were 1.47 and 1.16 mm in the PFNA-II and MSN-II models, respectively. CONCLUSION: Compared with PFNA-II for inter-trochanteric fracture (AO/OTA 31-A3.1), MSN-II which was designed with a triangular stability structure can provide better biomechanical stability. The MSN-II may be a feasible option for the treatment of reverse obliquity inter-trochanteric fracture.

Dynamic Alterations in Microarchitecture, Mineralization and Mechanical Property of Subchondral Bone in Rat Medial Meniscal Tear Model of Osteoarthritis.

BACKGROUND: The properties of subchondral bone influence the integrity of articular cartilage in the pathogenesis of osteoarthritis (OA). However, the characteristics of subchondral bone alterations remain unresolved. The present study aimed to observe the dynamic alterations in the microarchitecture, mineralization, and mechanical properties of subchondral bone during the progression of OA. METHODS: A medial meniscal tear (MMT) operation was performed in 128 adult Sprague Dawley rats to induce OA. At 2, 4, 8, and 12 weeks following the MMT operation, cartilage degeneration was evaluated using toluidine blue O staining, whereas changes in the microarchitecture indices and tissue mineral density (TMD), mineral-to-collagen ratio, and intrinsic mechanical properties of subchondral bone plates (BPs) and trabecular bones (Tbs) were measured using micro-computed tomography scanning, confocal Raman microspectroscopy and nanoindentation testing, respectively. RESULTS: Cartilage degeneration occurred and worsened progressively from 2 to 12 weeks after OA induction. Microarchitecture analysis revealed that the subchondral bone shifted from bone resorption early (reduced trabecular BV/TV, trabecular number, connectivity density and trabecular thickness [Tb.Th], and increased trabecular spacing (Tb.Sp) at 2 and 4 weeks) to bone accretion late (increased BV/TV, Tb.Th and thickness of subchondral bone plate, and reduced Tb.Sp at 8 and 12 weeks). The TMD of both the BP and Tb displayed no significant changes at 2 and 4 weeks but decreased at 8 and 12 weeks. The mineral-to-collagen ratio showed a significant decrease from 4 weeks for the Tb and from 8 weeks for the BP after OA induction. Both the elastic modulus and hardness of the Tb showed a significant decrease from 4 weeks after OA induction. The BP showed a significant decrease in its elastic modulus from 8 weeks and its hardness from 4 weeks. CONCLUSION: The microarchitecture, mineralization and mechanical properties of subchondral bone changed in a time-dependent manner as OA progressed.

Strontium ranelate reduces cartilage degeneration and subchondral bone remodeling in rat osteoarthritis model.

AIM: To investigate whether strontium ranelate (SR), a new antiosteoporotic agent, could attenuate cartilage degeneration and subchondral bone remodeling in osteoarthritis (OA). METHODS: Medial meniscal tear (MMT) operation was performed in adult SD rats to induce OA. SR (625 or 1800 mg·kg(-1)·d(-1)) was administered via gavage for 3 or 6 weeks. After the animals were sacrificed, articular cartilage degeneration was evaluated using toluidine blue O staining, SOX9 immunohistochemistry and TUNEL assay. The changes in microarchitecture indices and tissue mineral density (TMD), chemical composition (mineral-to-collagen ratio), and intrinsic mechanical properties of the subchondral bones were measured using micro-CT scanning, confocal Raman microspectroscopy and nanoindentation testing, respectively. RESULTS: The high-dose SR significantly attenuated cartilage matrix and chondrocyte loss at 6 weeks, and decreased chondrocyte apoptosis, improved the expression of SOX9, a critical transcription factor responsible for the expression of anabolic genes type II collagen and aggrecan, at both 3 and 6 weeks. Meanwhile, the high-dose SR also significantly attenuated the subchondral bone remodeling at both 3 and 6 weeks, as shown by the improved microarchitecture indices, TMD, mineral-to-collagen ratio and intrinsic mechanical properties. In contrast, the low-dose SR did not significantly change all the detection indices of cartilage and bone at both 3 and 6 weeks. CONCLUSION: The high-dose SR treatment can reduce articular cartilage degeneration and subchondral bone remodeling in the rat MMT model of OA.

Efficacy of zoledronic acid in treatment of teoarthritis is dependent on the disease progression stage in rat medial meniscal tear model.

AIM: To investigate whether the stage of osteoarthritis (OA) progression influenced the efficacy of the third-generation bisphosphonate zoledronic acid in a rat medial meniscal tear model. METHODS: Medial meniscal tear (MMT) was surgically induced in adult male Sprague Dawley rats. Zoledronic acid (ZOL, 100 µg/kg, sc, twice a week) was administered starting immediately, early (from 4 weeks) or late (from 8 weeks) after OA induction. The degeneration of articular cartilage was evaluated with toluidine blue O staining. Subchondral bone remodeling was evaluated with X-ray micro-CT scanning. Joint pain was measured with respect to weight-bearing asymmetry. Calcitonin gene-related peptide (CGRP) expression in dorsal root ganglia (DRGs) was examined using immunofluorescence analysis. The afferent neurons in DRGs innervating the joint were identified by retrograde labeling with fluorogold. RESULTS: Progressive cartilage loss was observed during 12 weeks after OA induction. Subchondral bone remodeling manifested as increased bone resorption at early stage (4 weeks), but as increased bone accretion at advanced stages (8 weeks). Immediately and early ZOL administration significantly improved subchondral microstructural parameters, attenuated cartilage degeneration, reduced weight-bearing asymmetry and CGRP expression, whereas the late ZOL administration had no significant effects. CONCLUSION: The stage of OA progression influences the efficacy of ZOL in treating joint degeneration and pain. To obtain the maximum efficacy, bisphosphonate treatment should be initiated in rat with early stages of OA pathogenesis.