RESUMO
INTRODUCTION: In Down syndrome (DS), white matter hyperintensities (WMHs) are highly prevalent, yet their topography and association with sociodemographic data and Alzheimer's disease (AD) biomarkers remain largely unexplored. METHODS: In 261 DS adults and 131 euploid controls, fluid-attenuated inversion recovery magnetic resonance imaging scans were segmented and WMHs were extracted in concentric white matter layers and lobar regions. We tested associations with AD clinical stages, sociodemographic data, cerebrospinal fluid (CSF) AD biomarkers, and gray matter (GM) volume. RESULTS: In DS, total WMHs arose at age 43 and showed stronger associations with age than in controls. WMH volume increased along the AD continuum, particularly in periventricular regions, and frontal, parietal, and occipital lobes. Associations were found with CSF biomarkers and temporo-parietal GM volumes. DISCUSSION: WMHs increase 10 years before AD symptom onset in DS and are closely linked with AD biomarkers and neurodegeneration. This suggests a direct connection to AD pathophysiology, independent of vascular risks. HIGHLIGHTS: White matter hyperintensities (WMHs) increased 10 years before Alzheimer's disease symptom onset in Down syndrome (DS). WMHs were strongly associated in DS with the neurofilament light chain biomarker. WMHs were more associated in DS with gray matter volume in parieto-temporal areas.
RESUMO
BACKGROUND AND OBJECTIVES: Cerebral hemorrhages are an exclusion criterion and potential adverse effect of antiamyloid agents. It is, therefore, critical to characterize the natural history of cerebral microbleeds in populations genetically predisposed to Alzheimer disease (AD), such as Down syndrome (DS). We aimed to assess microbleed emergence in adults with DS across the AD spectrum, defining their topography and associations with clinical variables, cognitive outcomes, and fluid and neuroimaging biomarkers. METHODS: This cross-sectional study included participants aged 18 years or older from the Down-Alzheimer Barcelona Neuroimaging Initiative and Sant Pau Initiative on Neurodegeneration with T1-weighted and susceptibility-weighted images. Participants underwent comprehensive assessments, including apolipoprotein E (APOE) genotyping; fluid and plasma determinations of beta-amyloid, tau, and neurofilament light; cognitive outcomes (Cambridge Cognitive Examination and modified Cued Recall Test); and vascular risk factors (hypertension, diabetes mellitus, and dyslipidemia). We manually segmented microbleeds and characterized their topography. Associations between microbleed severity and AD biomarkers were explored using between-group comparisons (none vs 1 vs 2+) and multivariate linear models. RESULTS: We included 276 individuals with DS and 158 healthy euploid controls (mean age = 47.8 years, 50.92% female). Individuals with DS were more likely to have microbleeds than controls (20% vs 8.9%, p < 0.001), with more severe presentation (12% with 2+ vs 1.9%). Microbleeds increased with age (12% 20-30 years vs 60% > 60 years) and AD clinical stage (12.42% asymptomatic, 27.9% prodromal, 35.09% dementia) were more common in APOEε4 carriers (26% vs 18.3% noncarriers, p = 0.008), but not associated with vascular risk factors (p > 0.05). Microbleeds were predominantly posterior (cerebellum 33.66%; occipital 14.85%; temporal 21.29%) in participants with DS. Associations with microbleed severity were found for neuroimaging and fluid AD biomarkers, but only hippocampal volumes (standardized ß = -0.18 [-0.31, -0.06], p < 0.005) and CSF p-tau-181 concentrations (ß = 0.26 [0.12, 0.41], p < 0.005) survived regression controlling for age and disease stage, respectively. Microbleeds had limited effect on cognitive outcomes. DISCUSSION: In participants with DS, microbleeds present with a posterior, lobar predominance, are associated with disease severity, but do not affect cognitive performance. These results suggest an interplay between AD pathology and vascular lesions, implicating microbleeds as a risk factor limiting the use of antiamyloid agents in this population.
Assuntos
Doença de Alzheimer , Peptídeos beta-Amiloides , Biomarcadores , Hemorragia Cerebral , Síndrome de Down , Proteínas tau , Humanos , Síndrome de Down/líquido cefalorraquidiano , Síndrome de Down/complicações , Síndrome de Down/diagnóstico por imagem , Feminino , Masculino , Pessoa de Meia-Idade , Estudos Transversais , Biomarcadores/líquido cefalorraquidiano , Biomarcadores/sangue , Hemorragia Cerebral/diagnóstico por imagem , Hemorragia Cerebral/líquido cefalorraquidiano , Doença de Alzheimer/líquido cefalorraquidiano , Doença de Alzheimer/diagnóstico por imagem , Peptídeos beta-Amiloides/líquido cefalorraquidiano , Proteínas tau/líquido cefalorraquidiano , Adulto , Imageamento por Ressonância Magnética , Idoso , Apolipoproteínas E/genética , Proteínas de Neurofilamentos/líquido cefalorraquidiano , Proteínas de Neurofilamentos/sangueRESUMO
Abstract Objective: The purpose of this paper is to analyze the differences in the perception of ethical decision making, organizational ethical climate, and organizational performance, before and during the COVID-19 pandemic by some health professionals in public and private hospitals in urban areas in Mexico. Materials and Method: 68 health professionals answered a survey using the snowball sampling technique. This digital structured survey evaluated the demographic characteristics of respondents and 3 dimensions (constructs) divided in 53 items: ethical decision making, organizational ethical climate, and organizational performance, before the COVID-19 pandemic (year 2019) and during the pandemic (year 2020-2021). To compare the differences of the dimensions before and during COVID-19, the t-test was carried out for dependent samples. Results: In the ethical decision making and organizational ethical climate dimensions, there were no statistically significant differences in the averages before and during the pandemic. In relation to the organizational performance there is a statistically significant difference in the averages before and during the pandemic, with a decrease in performance. Conclusions: This research contributes to literature on healthcare service management suggesting to acknowledge that, in an adverse environment, the decision making process based on ethics and an ethical climate should be maintained in the organizations to avoid a more dramatic fall in performance.
Resumen Objetivo: El propósito de este artículo es analizar las diferencias en la percepción de la toma de decisiones éticas, clima ético organizacional y desempeño organizacional, antes y durante la pandemia por COVID-19, en algunos profesionales de la salud de hospitales públicos y privados del área urbana de México. Materiales y Métodos: 68 profesionales de la salud respondieron una encuesta utilizando la técnica de muestreo de bola de nieve. Esta encuesta estructurada digital evaluó las características demográficas de los encuestados y 3 dimensiones (constructos) divididas en 53 ítems: toma de decisiones éticas, clima ético organizacional y desempeño organizacional, antes de la pandemia de COVID-19 (año 2019) y durante la pandemia (año 2020-2021). Para comparar las diferencias de las dimensiones antes y durante el COVID-19, se realizó la prueba t para muestras dependientes. Resultados: En las dimensiones toma de decisiones éticas y clima ético organizacional, no se presentaron diferencias estadísticamente significativas en los promedios antes y durante la pandemia. En relación al desempeño organizacional existe una diferencia estadísticamente significativa en los promedios antes y durante la pandemia, con una disminución en el desempeño. Conclusiones: Esta investigación contribuye a la literatura acerca de la gestión de servicios de salud sugiriendo que, en un entorno adverso, la toma de decisiones basada en la ética y un clima ético deben mantenerse en las organizaciones para evitar una caída más dramática en el desempeño.
RESUMO
BACKGROUND: Neurogenic detrusor overactivity (NDO) can damage the upper urinary tract leading to chronic renal impairment. Antimuscarinic therapy is used to improve urinary incontinence and protect the upper urinary tract in patients with NDO. OBJECTIVE: This study investigated safety and efficacy of fesoterodine, a muscarinic receptor antagonist, in 6â<18-year-old patients with NDO (NCT01557244). STUDY DESIGN: This open-label phase 3 study included 2 pediatric cohorts. Patients in Cohort 1 (bodyweight >25 kg) were randomized to fesoterodine 4 or 8 mg extended-release tablets or oxybutynin XL tablets administered over the 12-week active comparator-controlled phase. The safety extension phase evaluated fesoterodine 4 and 8 mg for a further 12 weeks, with patients in the oxybutynin arm allocated to fesoterodine 4 or 8 mg. Patients in Cohort 2 (bodyweight ≤25 kg) were randomized to fesoterodine 2 or 4 mg extended-release beads-in-capsule (BIC) administered over a 12-week efficacy phase and 12-week safety extension phase. Patients with stable neurologic disease and clinically or urodynamically proven NDO were included. The primary endpoint was change from baseline to Week 12 in maximum cystometric bladder capacity (MCC). Secondary efficacy endpoints included detrusor pressure at maximum bladder capacity, bladder volume at first involuntary detrusor contraction, bladder compliance, and incontinence episodes. Safety endpoints included adverse event incidence, and specific assessments of cognition, behavior and vision. The pharmacokinetics of 5-hydroxymethyl tolterodine (5-HMT; fesoterodine's active metabolite) was determined using population-pharmacokinetic analysis. RESULTS: In Cohort 1 (n = 124), fesoterodine 4 and 8 mg treatment resulted in significant increases from baseline in the primary endpoint of MCC at Week 12. In Cohort 2 (n = 57), fesoterodine 2 and 4 mg BIC treatment resulted in improvements in MCC from baseline. Fesoterodine 4 and 8 mg and fesoterodine 4 mg BIC led to improvements in some secondary efficacy endpoints. The most common treatment-related adverse reactions were gastrointestinal effects, such as dry mouth, which occurred more frequently with oxybutynin than fesoterodine. No detrimental effects on visual accommodation or acuity, or on cognitive function or behavior were observed. DISCUSSION: These safety and efficacy results are consistent with limited published data on fesoterodine treatment in pediatric populations with overactive bladder or NDO. Study limitations include the lack of placebo control and the small sample size, which limits the ability to make formal efficacy comparisons and detect rare adverse reactions. CONCLUSION: Fesoterodine has a favorable benefit-risk profile in 6â<18-year-old patients with NDO and may represent an additional option for pediatric NDO treatment.
Assuntos
Bexiga Urinaria Neurogênica , Bexiga Urinária Hiperativa , Incontinência Urinária , Humanos , Criança , Adolescente , Bexiga Urinária Hiperativa/complicações , Resultado do Tratamento , Ácidos Mandélicos/farmacologia , Ácidos Mandélicos/uso terapêutico , Incontinência Urinária/tratamento farmacológico , Antagonistas Muscarínicos/uso terapêutico , Urodinâmica/fisiologiaRESUMO
Different nematodes affect canines, however Acanthocheilonema reconditum was considered mostly a non-pathogenic parasite. Climate change, animal migration, and other factors transformed the dynamics of vector-borne diseases, including filariasis. Since 2016, a sudden increase in the number of dogs with microfilaremia was reported by different veterinary centers in Cali, southwest Colombia. The objective of this study was to molecularly identify the etiologic agent of this filariasis outbreak detected in this city, using PCR−RFLP and evaluating dogs' clinical signs. From 2018−2019, canine filariasis cases were prospectively evaluated after a microscopic test, recruiting 82 cases and 43 healthy controls from 2971 samples. Acanthocheilonema reconditum (Nematoda, Onchocercidae) was identified in 61.3% of the cases (49/82) by PCR−RFLP. Sanger sequencing of the 5.8S ribosomal RNA gene and internal transcribed spacer-2 fragment was additionally performed on seven cases, confirming A. reconditum in all of them. The filariasis cases are statistically associated with male dogs who have clinical signs of anemia, low levels of hemoglobin and hematocrit (p < 0.0001), and high levels of plasma proteins (p < 0.001). This emerging canine disease constitutes an important public health concern among veterinarians and active surveillance is advised to explore its zoonotic potential.
RESUMO
Frozen-state storage and cold-chain transport are key operations in the development and commercialization of biopharmaceuticals. Today, several marketed drug products are stored (and/or shipped) under frozen conditions to ensure sufficient stability, particularly for live viral vaccines. When these products are stored in glass vials with stoppers, the elastomer of the stopper needs to be flexible enough to seal the vial at the target's lowest temperature to ensure container closure integrity and thus both sterility and safety of the drug product. The container closure integrity assessment in the frozen state (e.g., -20°C, -80°C) should include container closure integrity (CCI) of the container closure system (CCS) itself, impact of processing (e.g., capping process on CCI), and impact of shipment and movement on CCI in the frozen state. The objective of this work was to evaluate the impact of processing and shipment on CCI of a CCS in the frozen state. The impact on other quality attributes was not investigated. In this light, the ThermCCI method was applied to evaluate the impact of shipping stress and variable capping force on CCI of frozen vials and to evaluate the temperature limits of rubber stoppers. In conclusion, retaining CCI during cold storage is mostly a function of vial-stopper combination, and temperatures below -40°C may pose a risk to the CCI of a frozen drug product. Variable capping force may have an influence on the CCI of a frozen drug product if not appropriately assessed. Regarding the impact of shipment on the CCI of glass vials, no indication was given at room temperature, -20°C, or -75°C when compared with static storage at such temperatures.LAY ABSTRACT: Today, several marketed products are stored (and/or shipped) under frozen conditions to ensure sufficient stability. When these products are stored in glass vials with stoppers, the elastomer of the stopper needs to be flexible enough to seal the vial and ensure container closure integrity and thus both sterility and safety of the drug product. The impact of processing and shipment on the container closure integrity (CCI) of a container closure system (vial, stopper, and flip-off cap) in the frozen state is assessed. A helium-leakage test at low temperature (ThermCCI) was used to evaluate the impact of shipping stress and variable capping force on CCI of frozen vials as well as the temperature limits of rubber stoppers. In conclusion, it was found that retaining CCI during cold storage is mostly a function of vial-stopper combination and that temperatures below -40°C may pose a risk to the CCI of a frozen drug product. Variable capping force may have an influence on the CCI of a frozen drug product if not appropriately assessed. Additionally, it was observed that the shipment of the frozen glass vials did not affect the CCI.
Assuntos
Embalagem de Medicamentos/normas , Armazenamento de Medicamentos/métodos , Tecnologia Farmacêutica/métodos , Embalagem de Medicamentos/instrumentação , Elastômeros/análise , Congelamento , Refrigeração , Borracha/análise , Temperatura , Meios de Transporte/métodosRESUMO
PURPOSE: The proper understanding of glass delamination is important to glass manufacturers, pharmaceutical companies, and health authorities to mitigate the occurrence of glass flakes from the vial when in contact with specific drug product solutions. The surface of glass vials is altered during glass cane- and vial forming processes and is exposed to different stress conditions during drug product processing before coming in contact with the drug product solution. In this study, the impact of vial washing and depyrogenation including an evaluation of various residual water volumes on surface properties of glass vials was investigated for a defined set of vials. METHODS: 3D laser scanning microscopy was established as a new method for topographic analysis of curved surfaces of glass vials operating in high-throughput mode. A subset of vials was subsequently exposed to delamination stress testing and both the stressed solution and inner vial surface were analyzed by a panel of conventional and advanced analytical techniques including 3D laser scanning microscopy. RESULTS: The data showed that vial washing and depyrogenation strongly influenced surface properties, in particular those of uncoated vials. Surface characteristics such as pits increased depending on the process conditions, which especially applies to Expansion 33 vials. Even low residual water volumes of 50 µL after vial washing were sufficient to change the surface properties of the glass and weaken the surface in those positions prone to glass delamination. An increase in pits was related to a greater risk for glass delamination. CONCLUSIONS: Vial processing conditions need to be assessed when aiming at minimizing the glass delamination risk during parenteral product storage.
Assuntos
Descontaminação/métodos , Embalagem de Medicamentos , Vidro/química , Descontaminação/normas , Embalagem de Medicamentos/normas , Vidro/análise , Imageamento Tridimensional/métodos , Imageamento Tridimensional/normas , Microscopia Confocal/métodos , Microscopia Confocal/normas , Propriedades de SuperfícieRESUMO
There has been a growing interest in recent years in the assessment of suitable vial/stopper combinations for storage and shipment of frozen drug products. Considering that the glass transition temperature (Tg) of butyl rubber stoppers used in container closure systems (CCSs) is between -55 °C to -65 °C, a storage or shipment temperature of a frozen product below the Tg of the rubber stopper may require special attention because below the Tg the rubber becomes more plastic like and loses its elastic (sealing) characteristics. Thus, they risk not maintaining container closure integrity (CCI). Given that the rubber regains its elastic properties and reseals after rewarming to ambient temperature, leaks during frozen temperature storage and transportation are transient and the CCI methods used at room temperature conditions are unable to confirm CCI in the frozen state. Hence, several experimental methods have been developed in recent years in order to evaluate CCI at low temperatures. Finite element (FE) simulations were applied in order to investigate the sealing behaviour of rubber stoppers for the drug product CCS under frozen storage conditions. FE analysis can help in reducing the experimental design space and thus the number of measurements needed, as they can be used as an add-on to experimental testing. Several scenarios have been simulated including the effect of thermal history, rubber type, storage time, worst-case CCS geometric tolerances, and capping pressure. The results of these calculations have been validated with experimental data derived from laboratory experiments (CCI at low temperatures), and a concept for tightness has been developed. It has been concluded that FE simulations have the potential to become a powerful predictive tool toward a better understanding of the influence of cold storage on the rubber sealing properties (and hence on CCI) when dealing with frozen drug products.LAY ABSTRACT: The growing interest in the assessment of suitable vial/stopper combinations for storage and shipment of frozen drug products has led to the development of a number of experimental methods to evaluate container closure integrity at low temperatures. The application of finite element simulations could aid in the investigation of the sealing behaviour of rubber stoppers for drug product container closure systems under frozen storage conditions by simplifying the experimental design space and the number of experimental measurements needed. In this work several scenarios have been simulated including the effect of thermal history, rubber type, storage time, worst-case container closure system geometric tolerances, and capping pressure. The results have been further validated with experimental data derived from laboratory experiments and a concept for tightness was developed. In conclusion, finite element simulations have shown the potential to become a powerful predictive tool toward a better understanding of the influence of cold storage on the rubber sealing properties (and hence on container closure integrity) when dealing with frozen drug products.
Assuntos
Embalagem de Medicamentos , Armazenamento de Medicamentos , Borracha/química , Tecnologia Farmacêutica/métodos , Temperatura Baixa , Análise de Elementos Finitos , Congelamento , Teste de Materiais , TemperaturaRESUMO
The appropriate selection of adequate primary packaging, such as the glass vial, rubber stopper, and crimp cap for parenteral products is of high importance to ensure product stability, microbiological quality (integrity) during storage as well as patient safety. A number of issues can arise when inadequate vial material is chosen, and sole compliance to hydrolytic class I is sometimes not sufficient when choosing a glass vial. Using an appropriate pre-treatment, such as surface modification or coating of the inner vial surface after the vial forming process the glass container quality is often improved and interactions of the formulation with the surface of glass may be minimized. This study aimed to characterize the inner surface of different type I glass vials (Exp33, Exp51, Siliconized, TopLyo™ and Type I plus®) at the nanoscale level. All vials were investigated topographically by colorimetric staining and Scanning Electron Microscopy (SEM). Glass composition of the surface was studied by Time-of-Flight - Secondary Ion Mass Spectrometry (ToF-SIMS) and X-ray Photoelectron Spectroscopy (XPS), and hydrophobicity/hydrophilicity of the inner surface was assessed by dye tests and surface energy measurements. All containers were studied unprocessed, as received from the vendor, i.e. in unwashed and non-depyrogenized condition. Clear differences were found between the different vial types studied. Especially glass vials without further surface modifications, like Exp33 and Exp51 vials, showed significant (I) vial-to-vial variations within one vial lot as well as (II) variations along the vertical axis of a single vial when studying topography and chemical composition. In addition, differences and heterogeneity in surface energy were found within a given tranche (circumferential direction) of Exp51 as well as Type I plus® vials. Most consistent quality was achieved with TopLyo™ vials. The present comprehensive characterization of surface properties of the different vial types may serve as basis to further guide the selection of adequate primary packaging based on the desired quality target product profile and to support studies of glass surface interactions with formulations. The proposed analytical method panel can be used for characterization of future glass vials either before delivery to the manufacturer or drug product manufacturing.
Assuntos
Embalagem de Medicamentos/métodos , Vidro/química , Soluções de Nutrição Parenteral/química , Preparações Farmacêuticas/química , Embalagem de Medicamentos/normas , Vidro/normas , Soluções de Nutrição Parenteral/normas , Preparações Farmacêuticas/normas , Propriedades de SuperfícieRESUMO
Glass delamination is characterized by the dissociation of glass flakes from the glass surface. Since glass delamination is time dependent, 5 vial types were investigated to assess delamination under accelerated stress conditions published as quick tests in literature and compared to stress testing recommended per United States Pharmacopoeia <1660>. A broad panel of analytical techniques was employed to test the solution for visible/subvisible particles and leachables and characterize topography and composition of the surface. The vial types showed significant differences in surface durability when applying the same stress conditions. An increase in glass leachables and change in topography were shown for uncoated vials. An indication for an elevated delamination risk was confirmed for Expansion 33 vials only by the compiled analytical data set including particle assessment and change in elemental composition of the near glass surface investigated by dynamic secondary ion mass spectrometry. The delamination test protocols differ in test solution, handling, and time. Before choosing the most appropriate protocol to predict delamination propensity and mimic real-time conditions, long-term storage data are needed. A combination of analytical techniques to study the risk for long-term corrosion of glass is highly recommended covering the 3 aspects: visible/subvisible particle assessment, solution analysis, and surface characterization.
Assuntos
Vidro/química , Embalagem de Medicamentos/métodos , Espectrometria de Massas/métodos , Preparações Farmacêuticas/análise , Preparações Farmacêuticas/química , RiscoRESUMO
The assurance of sterility of a parenteral drug product, prior to any human use, is a regulatory requirement. Hence, all strategies related to container closure integrity (CCI) must demonstrate absence of microbial contamination through leaks as part of the container closure system (CCS) qualification, during manufacturing, for quality control purposes and to ensure microbiological integrity (sterility) during storage and shipment up to the end of product shelf life. Current regulatory guidances, which differ between countries and regions, provide limited detail on how to assess CCI. The new revision of USP <1207> aims to provide extensive and detailed guidance for CCI assessments for sterile products. However, practical questions and considerations are yet to be addressed by the pharmaceutical industry. These may include: (1) choice of method, for example whether a deterministic CCI method (e.g., helium leak) is preferable over the probabilistic CCI method (e.g., microbial ingress), (2) the type of primary packaging (e.g., vial, syringe, device), (3) dosage form (e.g., liquid versus lyophilisate), (4) suitable acceptance criteria, (5) appropriate sample size, (6) the most appropriate way to introduce artificial leaks into the CCS, (7) ensuring suitable assurance of CCI during drug product manufacturing, and (8) evaluating CCI under intended shipment and storage conditions (e.g., in the frozen state).A group of European industry peers have met to discuss these and other related questions in order to provide their viewpoint and best practice on practical approaches to CCI. Their perspective is provided in this white paper. Through these discussions, it became clear that there is currently no gold standard for CCI test methods or for the generation of artificial leaks; therefore flexibility toward CCI approaches is required. Although there should be flexibility, any CCI approach must consider the intended use (e.g., CCS qualification, routine manufacturing, or quality control) and product design (e.g., primary packaging, liquid versus dried product).LAY ABSTRACT: The assurance of sterility of a parenteral drug product prior to any human use is a regulatory requirement. Hence, all strategies related to container closure integrity (CCI) must demonstrate absence of microbial contamination through leaks as part of the container closure system (CCS) qualification, during manufacturing, for quality control purposes and to ensure microbiological integrity (sterility) during storage and shipment up to the end of shelf life. Current regulatory guidances, which differ between countries and regions, provide limited detail on how to assess CCI. The new revision of USP <1207> aims to provide extensive and detailed guidance for CCI assessments for sterile products. However, practical questions and considerations are yet to be addressed by the pharmaceutical industry.A group of European industry peers have met to discuss these and other related questions in order to provide their viewpoint and best practice on practical approaches to CCI. Their perspective is provided in this white paper. Through these discussions, it became clear that there is currently no gold standard for CCI test methods or for the generation of artificial leaks; therefore flexibility toward CCI approaches is required. Although there should be flexibility, any CCI approach must consider the intended use (e.g., CCS qualification, routine manufacturing, or quality control) and product design (e.g., primary packaging, liquid versus dried product).
Assuntos
Contaminação de Medicamentos/prevenção & controle , Embalagem de Medicamentos/normas , Modelos Teóricos , Controle de Qualidade , Embalagem de Medicamentos/instrumentação , Embalagem de Medicamentos/métodos , Armazenamento de Medicamentos , Teste de MateriaisRESUMO
Container closure integrity (CCI) testing is required by different regulatory authorities in order to provide assurance of tightness of the container closure system against possible contamination, for example, by microorganisms. Microbial ingress CCI testing is performed by incubation of the container closure system with microorganisms under specified testing conditions. Physical CCI uses surrogate endpoints, such as coloration by dye solution ingress or gas flow (helium leakage testing). In order to correlate microbial CCI and physical CCI test methods and to evaluate the methods' capability to detect a given leak, artificial leaks are being introduced into the container closure system in a variety of different ways. In our study, artificial leaks were generated using inserted copper wires between the glass vial opening and rubber stopper. However, the insertion of copper wires introduces leaks of unknown size and shape. With nonlinear finite element simulations, the aperture size between the rubber stopper and the glass vial was calculated, depending on wire diameter and capping force. The dependency of the aperture size on the copper wire diameter was quadratic. With the data obtained, we were able to calculate the leak size and model leak shape. Our results suggest that the size as well as the shape of the artificial leaks should be taken into account when evaluating critical leak sizes, as flow rate does not, independently, correlate to hole size. Capping force also affected leak size. An increase in the capping force from 30 to 70 N resulted in a reduction of the aperture (leak size) by approximately 50% for all wire diameters. From 30 to 50 N, the reduction was approximately 33%. LAY ABSTRACT: Container closure integrity (CCI) testing is required by different regulatory authorities in order to provide assurance of tightness of the container closure system against contamination, for example, by microorganisms. Microbial ingress CCI testing is performed by incubation of the container closure system with microorganisms under specified testing conditions. Physical CCI uses surrogate endpoints, such as coloration by dye solution ingress or gas flow. In order to correlate microbial ingress CCI and physical CCI test methods and to evaluate the methods' capability to detect a given leak, artificially created defects (artificial leaks) are being introduced into the container closure system in a variety of different ways. In our study, artificial leaks were generated using inserted copper wires between the glass vial opening and rubber stopper. Up to date, the insertion of copper wires introduced leaks of unknown size and shape. With nonlinear finite element simulations, the effective aperture size between the rubber stopper and the glass vial was calculated, depending on wire diameter and capping force, and the leak shape was modelled. Our results suggest that the size as well as the shape of the artificial leaks should be taken into account when evaluating critical leak sizes, as flow rate does not, independently, correlate to the hole size.
Assuntos
Cobre , Embalagem de Medicamentos/métodos , Análise de Elementos Finitos , Vidro , Dinâmica não Linear , Borracha , Cobre/normas , Contaminação de Medicamentos/prevenção & controle , Embalagem de Medicamentos/instrumentação , Embalagem de Medicamentos/normas , Vidro/normas , Humanos , Borracha/normas , Tecnologia Farmacêutica/instrumentação , Tecnologia Farmacêutica/métodos , Tecnologia Farmacêutica/normasRESUMO
The majority of parenteral drug products are manufactured in glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. Different critical capping process parameters can affect rubber stopper defects, rubber stopper compression, container closure integrity, and also crimp cap quality. A sufficiently high force to remove the flip-off button prior to usage is required to ensure quality of the drug product unit by the flip-off button during storage, transportation, and until opening and use. Therefore, the final product is 100% visually inspected for lose or defective crimp caps, which is subjective as well as time- and labor-intensive. In this study, we sealed several container closure system configurations with different capping equipment settings (with corresponding residual seal force values) to investigate the torque moment required to turn the crimp cap. A correlation between torque moment and residual seal force has been established. The torque moment was found to be influenced by several parameters, including diameter of the vial head, type of rubber stopper (serum or lyophilized) and type of crimp cap (West(®) or Datwyler(®)). In addition, we measured the force required to remove the flip-off button of a sealed container closure system. The capping process had no influence on measured forces; however, it was possible to detect partially crimped vials. In conclusion, a controlled capping process with a defined target residual seal force range leads to a tight crimp cap on a sealed container closure system and can ensure product quality. LAY ABSTRACT: The majority of parenteral drug products are manufactured in a glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. An adequate force to remove the flip-off button prior to usage is required to ensure product quality during storage and transportation until use. In addition, the complete crimp cap needs to be fixed in a tight position on the vial. In this study, we investigated the torque moment required to turn the crimp cap and the force required to remove the flip-off button of container closure system sealed with different capping equipment process parameters (having different residual seal force values).
Assuntos
Embalagem de Medicamentos/métodos , Vidro/normas , Borracha/normas , Tecnologia Farmacêutica/métodos , Torque , Embalagem de Medicamentos/instrumentação , Soluções de Nutrição Parenteral/normas , Tecnologia Farmacêutica/instrumentaçãoRESUMO
Sometimes, drug product for parenteral administration is stored in a frozen state (e.g., -20 °C or -80 °C), particularly during early stages of development of some biotech molecules in order to provide sufficient stability. Shipment of frozen product could potentially be performed in the frozen state, yet possibly at different temperatures, for example, using dry ice (-80 °C). Container closure systems of drug products usually consist of a glass vial, rubber stopper, and an aluminum crimped cap. In the frozen state, the glass transition temperature (Tg) of commonly used rubber stoppers is between -55 and -65 °C. Below their Tg, rubber stoppers are known to lose their elastic properties and become brittle, and thus potentially fail to maintain container closure integrity in the frozen state. Leaks during frozen temperature storage and transportation are likely to be transient, yet, can possibly risk container closure integrity and lead to microbial contamination. After thawing, the rubber stopper is supposed to re-seal the container closure system. Given the transient nature of the possible impact on container closure integrity in the frozen state, typical container closure integrity testing methods (used at room temperature conditions) are unable to evaluate and thus confirm container closure integrity in the frozen state. Here we present the development of a novel method (thermal physical container closure integrity) for direct assessment of container closure integrity by a physical method (physical container closure integrity) at frozen conditions, using a modified He leakage test. In this study, different container closure systems were evaluated with regard to physical container closure integrity in the frozen state to assess the suitability of vial/stopper combinations and were compared to a gas headspace method. In summary, the thermal physical container closure integrity He leakage method was more sensitive in detecting physical container closure integrity impact than gas headspace and aided identification of an unsuitable container closure system. LAY ABSTRACT: Sometimes, drug product for parenteral administration is stored in a frozen state (e.g., -20 °C or -80 °C), particularly during early stages of development of some biotech molecules in order to provide sufficient stability. Container closure systems for drug products usually consist of a glass vial, rubber stopper, and an aluminum crimped cap. In the frozen state, the glass transition temperature (Tg) of commonly used rubber stoppers is between -55 and -65 °C. Leaks during frozen temperature storage and transportation are likely to be transient, yet they can possibly risk container closure integrity and lead to microbial contamination and sterility breach. After thawing, the rubber stopper is expected to re-seal the container closure system. Given the transient nature of the possible impact on container closure integrity in the frozen state, typical container closure integrity testing methods (used at room temperature conditions) are unable to evaluate and thus confirm container closure integrity in the frozen state. Here we present the development of a novel method (thermal container closure integrity) for direct measurement of container closure integrity by a physical method (physical container closure integrity) at frozen conditions, using a modified He leakage test. In this study, we found that the thermal container closure integrity He leakage method was more sensitive in detecting physical container closure integrity impact than gas headspace and aided identification of an unsuitable container closure system.
Assuntos
Embalagem de Medicamentos/normas , Congelamento , Preparações Farmacêuticas/normas , Microtomografia por Raio-X/normas , Contaminação de Medicamentos/prevenção & controle , Embalagem de Medicamentos/métodos , Armazenamento de Medicamentos/métodos , Armazenamento de Medicamentos/normas , Vidro , Microtomografia por Raio-X/métodosRESUMO
El presente artículo de revisión, expone los resultados de una investigación bibliográfica sobre la relación existente entre las creencias irracionales, la adicción al trabajo y el síndrome de Burnout en el contexto de las organizaciones. Con esta finalidad, se contemplaron aspectos como la conceptualización de los constructos, su origen y sus interrelaciones, las características de las personas que lo presentan, los perjuicios en la salud física y estrategias de intervención. Entre las principales conclusiones señalamos que se deben fortalecer los estudios que tengan en cuenta los niveles individuales, organizacionales y grupales en la institución, para profundizar en la complejidad sistémica de la condición; además, se observa la necesidad de construir un modelo que permita la transformación de los contextos laborales no saludables
This article exposes the outcomes of a bibliographic research about the relation between irrational beliefs, workaholism and burnout. For this purpose, we contemplated aspects like definition, origin and connection between these three phenomena, characteristics of workaholics and people with burnout syndrome and the impact on health and intervention. We concluded it is required new researches that take into account individual, organizational and group levels in the organization to deepen the study of the systemic complexity of these phenomena; there is also necessary to build a model that allows the transformation of unhealthy work environments
RESUMO
Many chorioretinal diseases are chronic and need sustained drug delivery systems to keep therapeutic drug level at the disease site. Many intravitreal drug delivery systems under developing do not have mechanism incorporated for a non-invasive monitoring of drug release. The current study prepared rugate porous silicon (pSi) particles by electrochemical etching with the current frequency (K value) of 2.17 and 2.45. Two model drugs (rapamycin and dexamethasone) and two drug-loading strategies were tested for the feasibility to monitor drug release from the pSi particles through a color fundus camera. The pSi particles (k=2.45) with infiltration loading of rapamycin demonstrated progressively more violet color reflection which was negatively associated with the rapamycin released into the vitreous (r=-0.4, p<0.001, pairwise). In contrast, pSi with K value of 2.17 demonstrated progressive color change toward green and a weak association between rapamycin released into vitreous and green color abundance was identified (r=-0.23, p=0.002, pairwise). Dexamethasone was covalently loaded on to the fully oxidized pSi particles that appeared in vitreous as yellow color and fading over time. The yellow color decrease over time was strongly associated with the dexamethasone detected from the vitreous samples (r=0.7, p<0.0001, pairwise). These results suggest that engineered porous silicon particles may be used as a self-reporting drug delivery system for a non-invasive real time remote monitoring. STATEMENT OF SIGNIFICANCE: The current study, for the first time, demonstrated proof of concept that engineered porous silicon photonic crystal may deliver therapeutics in a controlled fashion while at the same time might offer a noninvasive remote monitoring of its payload release in a living eye. Porous silicon photonic crystal changes color which is in association with its payload release into vitreous. With further optimization, the color change may be harnessed to inform eye care professionals of real time drug concentration in the eye and allow them to make informed decision to re-dose the patients.
Assuntos
Dexametasona , Sistemas de Liberação de Medicamentos , Monitoramento de Medicamentos , Doenças Retinianas/tratamento farmacológico , Sirolimo , Animais , Dexametasona/farmacocinética , Dexametasona/farmacologia , Sistemas de Liberação de Medicamentos/instrumentação , Sistemas de Liberação de Medicamentos/métodos , Monitoramento de Medicamentos/instrumentação , Monitoramento de Medicamentos/métodos , Coelhos , Sirolimo/farmacocinética , Sirolimo/farmacologia , Gravação em VídeoRESUMO
PURPOSE: To understand the relationship between rapamycin loading/release and surface chemistries of porous silicon (pSi) to optimize pSi-based intravitreal delivery system. METHODS: Three types of surface chemical modifications were studied: (1) pSi-COOH, containing 10-carbon aliphatic chains with terminal carboxyl groups grafted via hydrosilylation of undecylenic acid; (2) pSi-C12, containing 12-carbon aliphatic chains grafted via hydrosilylation of 1-dodecene; and (3) pSiO2-C8, prepared by mild oxidation of the pSi particles followed by grafting of 8-hydrocarbon chains to the resulting porous silica surface via a silanization. RESULTS: The efficiency of rapamycin loading follows the order (micrograms of drug/milligrams of carrier): pSiO2-C8 (105 ± 18) > pSi-COOH (68 ± 8) > pSi-C12 (36 ± 6). Powder X-ray diffraction data showed that loaded rapamycin was amorphous and dynamic drug-release study showed that the availability of the free drug was increased by 6-fold (compared with crystalline rapamycin) by using pSiO2-C8 formulation (P = 0.0039). Of the three formulations in this study, pSiO2-C8-RAP showed optimal performance in terms of simultaneous release of the active drug and carrier degradation, and drug-loading capacity. Released rapamycin was confirmed with the fingerprints of the mass spectrometry and biologically functional as the control of commercial crystalline rapamycin. Single intravitreal injections of 2.9 ± 0.37 mg pSiO2-C8-RAP into rabbit eyes resulted in more than 8 weeks of residence in the vitreous while maintaining clear optical media and normal histology of the retina in comparison to the controls. CONCLUSIONS: Porous silicon-based rapamycin delivery system using the pSiO2-C8 formulation demonstrated good ocular compatibility and may provide sustained drug release for retina.
Assuntos
Sistemas de Liberação de Medicamentos/instrumentação , Degeneração Macular/tratamento farmacológico , Silício , Sirolimo/administração & dosagem , Animais , Células Cultivadas , Preparações de Ação Retardada , Modelos Animais de Doenças , Seguimentos , Humanos , Imunossupressores/administração & dosagem , Injeções Intravítreas , Degeneração Macular/patologia , Tamanho da Partícula , Porosidade , Coelhos , Propriedades de SuperfícieRESUMO
BACKGROUND: Multiple sclerosis (MS) is a complex immune-mediated disease. It has been suggested that genetic factors could explain differences in the prevalence among ethnic groups. To know whether genetic ancestry is a potential risk factor for MS in Mexican patients and to identify candidate genes for the susceptibility to the disease we conducted an initial trial of genome-wide analysis. METHODS: 29 patients with diagnosis of definitive MS and 132 unrelated healthy controls were genotyped using the Affymetrix human 6.0 array. After QC procedures, ancestry determination and a preliminary case-control association study were performed. RESULTS: We identified significant differences in the European ancestry proportion between MS cases and controls (33.1 vs. 25.56, respectively; p=0.0045). Imputation analysis in the MHC region on chromosome 6 showed a signal with a significant level (p<0.00005) on the HLA-DRB region. Additionally, a preliminary association analysis highlighted the ASF1B as novel candidate gene participating in MS. CONCLUSION: Our data suggest that European ancestry is a risk factor to develop MS in Mexican Mestizo population. Conversely, indigenous ancestry of Asian origin seems to confer protection. Further studies with more MS cases are needed to confirm these findings.
Assuntos
Frequência do Gene/genética , Predisposição Genética para Doença , Esclerose Múltipla/genética , Polimorfismo de Nucleotídeo Único/genética , Adolescente , Adulto , População Negra , Feminino , Estudo de Associação Genômica Ampla , Genótipo , Humanos , Masculino , México , Pessoa de Meia-Idade , População Branca/genética , Adulto JovemRESUMO
We report the monitoring of porous silicon (pSi) degradation in aqueous solutions using a consumer-grade digital camera. To facilitate optical monitoring, the pSi samples were prepared as one-dimensional photonic crystals (rugate filters) by electrochemical etching of highly doped p-type Si wafers using a periodic etch waveform. Two pSi formulations, representing chemistries relevant for self-reporting drug delivery applications, were tested: freshly etched pSi (fpSi) and fpSi coated with the biodegradable polymer chitosan (pSi-ch). Accelerated degradation of the samples in an ethanol-containing pH 10 aqueous basic buffer was monitored in situ by digital imaging with a consumer-grade digital camera with simultaneous optical reflectance spectrophotometric point measurements. As the nanostructured porous silicon matrix dissolved, a hypsochromic shift in the wavelength of the rugate reflectance peak resulted in visible color changes from red to green. While the H coordinate in the hue, saturation, and value (HSV) color space calculated using the as-acquired photographs was a good monitor of degradation at short times (t < 100 min), it was not a useful monitor of sample degradation at longer times since it was influenced by reflections of the broad spectral output of the lamp as well as from the narrow rugate reflectance band. A monotonic relationship was observed between the wavelength of the rugate reflectance peak and an H parameter value calculated from the average red-green-blue (RGB) values of each image by first independently normalizing each channel (R, G, and B) using their maximum and minimum value over the time course of the degradation process. Spectrophotometric measurements and digital image analysis using this H parameter gave consistent relative stabilities of the samples as fpSi > pSi-ch.
RESUMO
Daunorubicin (DNR) is an effective inhibitor of an array of proteins involved in neovascularization, including VEGF and PDGF. These growth factors are directly related to retina scar formation in many devastating retinal diseases. Due to the short vitreous half-life and narrow therapeutic window, ocular application of DNR is limited. It has been shown that a porous silicon (pSi) based delivery system can extend DNR vitreous residence from a few days to 3months. In this study we investigated the feasibility of altering the pore size of the silicon particles to regulate the payload release. Modulation of the etching parameters allowed control of the nano-pore size from 15nm to 95nm. In vitro studies showed that degradation of pSiO2 increased with increasing pore size and the degradation of pSiO2 was approximately constant for a given particle type. The degradation of pSiO2 with 43nm pores was significantly greater than the other two particles with smaller pores, judged by observed and normalized mean Si concentration of the dissolution samples (44.2±8.9 vs 25.7±5.6 or 21.2±4.2µg/mL, p<0.0001). In vitro dynamic DNR release revealed that pSiO2-CO2H:DNR (porous silicon dioxide with covalent loading of daunorubicin) with large pores (43nm) yielded a significantly higher DNR level than particles with 15 or 26nm pores (13.5±6.9ng/mL vs. 2.3±1.6ng/mL and 1.1±0.9ng/mL, p<0.0001). After two months of in vitro dynamic release, 54% of the pSiO2-CO2H:DNR particles still remained in the dissolution chamber by weight. In vivo drug release study demonstrated that free DNR in the vitreous at post-injection day 14 was 66.52ng/mL for 95nm pore size pSiO2-CO2H:DNR, 10.76ng/mL for 43nm pSiO2-CO2H:DNR, and only 1.05ng/mL for 15nm pSiO2-CO2H:DNR. Pore expansion from 15nm to 95nm led to a 63 fold increase of DNR release (p<0.0001) and a direct correlation between the pore size and the drug levels in the living eye vitreous was confirmed. The present study demonstrates the feasibility of regulating DNR release from pSiO2 covalently loaded with DNR by engineering the nano-pore size of pSi.