RESUMO
Bottlebrush (BB) elastomers with water-soluble side chains and tissue-mimetic mechanical properties are promising for biomedical applications like tissue implants and drug depots. This work investigates the microstructure and phase transitions of BB elastomers with crystallizable polyethylene oxide (PEO) side chains by real-time synchrotron X-ray scattering. In the melt, the elastomers exhibit the characteristic BB peak corresponding to the backbone-to-backbone correlation. This peak is a distinct feature of BB systems and is observable in small- or medium-angle X-ray scattering curves. In the systems studied, the position of the BB peak ranges from 3.6 to 4.8 nm in BB elastomers. This variation is associated with the degree of polymerization of the polyethylene oxide (PEO) side chains, which ranges from 19 to 40. Upon crystallization of the side chains, the intensity of the peak decays linearly with crystallinity and eventually vanishes due to BB packing disordering within intercrystalline amorphous gaps. This behavior of the bottlebrush peak differs from an earlier study of BBs with poly(ε-caprolactone) side chains, explained by stronger backbone confinement in the case of PEO, a high-crystallinity polymer. Microstructural models based on 1D SAXS correlation function analysis suggest crystalline lamellae of PEO side chains separated by amorphous gaps of monolayer-like BB backbones.
RESUMO
Our lives cannot be imagined without polymer networks, which range widely, from synthetic rubber to biological tissues. Their properties-elasticity, strain-stiffening and stretchability-are controlled by a convolution of chemical composition, strand conformation and network topology. Yet, since the discovery of rubber vulcanization by Charles Goodyear in 1839, the internal organization of networks has remained a sealed 'black box'. While many studies show how network properties respond to topology variation, no method currently exists that would allow the decoding of the network structure from its properties. We address this problem by analysing networks' nonlinear responses to deformation to quantify their crosslink density, strand flexibility and fraction of stress-supporting strands. The decoded structural information enables the quality control of network synthesis, comparison of targeted to actual architecture and network classification according to the effectiveness of stress distribution. The developed forensic approach is a vital step in future implementation of artificial intelligence principles for soft matter design.
RESUMO
Hot-melt pressure-sensitive adhesives (HMPSAs) are used in applications from office supplies to biomedical adhesives. The major component in HMPSA formulations is thermoplastic elastomers, such as styrene-based block copolymers, that provide both mechanical integrity and moldability. Since neat polymer networks are unable to establish an adhesive bond, large quantities of plasticizers and tackifiers are added. These additives enhance the adhesive performance but complicate the phase behavior and property stability of the pressure-sensitive adhesive. Herein, we introduce an alternative additive-free approach to HMPSA design based on self-assembly of bottlebrush graft-copolymers, where side chains behave as softness, strength, and viscoelasticity mediators. These systems maintain moldability of conventional thermoplastic elastomers, while architecturally disentangled bottlebrush network strands empower several benefits such as extreme softness for substrate wetting, low melt viscosity for molding and 3D-printing, and a broad frequency range of viscoelastic responses for adhesion regulation within almost four orders of magnitude. The brush graft-copolymers implement five independently controlled architectural parameters to regulate the Rouse time, work of adhesion, and debonding mechanisms.
RESUMO
Pressure sensitive adhesives (PSAs) are ubiquitous materials within a spectrum that span from office supplies to biomedical devices. Currently, the ability of PSAs to meet the needs of these diverse applications relies on trial-and-error mixing of assorted chemicals and polymers, which inherently entails property imprecision and variance over time due to component migration and leaching. Herein, we develop a precise additive-free PSA design platform that predictably leverages polymer network architecture to empower comprehensive control over adhesive performance. Utilizing the chemical universality of brush-like elastomers, we encode work of adhesion ranging 5 orders of magnitude with a single polymer chemistry by coordinating brush architectural parameters-side chain length and grafting density. Lessons from this design-by-architecture approach are essential for future implementation of AI machinery in molecular engineering of both cured and thermoplastic PSAs incorporated into everyday use.
RESUMO
Polymeric networks are commonly used for various biomedical applications, from reconstructive surgery to wearable electronics. Some materials may be soft, firm, strong, or damping however, implementing all four properties into a single material to replicate the mechanical properties of tissue has been inaccessible. Herein, we present the A-g-B brush-like graft copolymer platform as a framework for fabrication of materials with independently tunable softness and firmness, capable of reaching a strength of â¼10 MPa on par with stress-supporting tissues such as blood vessel, muscle, and skin. These properties are maintained by architectural control, therefore diverse mechanical phenotypes are attainable for a variety of different chemistries. Utilizing this attribute, we demonstrate the capability of the A-g-B platform to enhance specific characteristics such as tackiness, damping, and moldability.
Assuntos
Elastômeros , Polímeros , EletrônicaRESUMO
Brush-like elastomers with crystallizable side chains hold promise for biomedical applications requiring the presence of two distinct mechanical states below and above body temperature: hard and supersoft. The hard semicrystalline state facilitates piercing of the body whereupon the material softens to match the mechanics of surrounding soft tissue. To understand the transition between the two states, the crystallization process was studied with synchrotron X-ray scattering for a series of brush elastomers with poly(ε-caprolactone) side chains bearing from 7 to 13 repeat units. The so-called bottlebrush correlation peak was used to monitor configuration of bottlebrush backbones in the amorphous regions during the crystallization process. In the course of crystallization, the backbones are expelled into the interlamellar amorphous gaps, which is accompanied by their conformational changes and leads to partitioning to unconfined (melt) and confined (semicrystalline) (conformational) states. The crystallization process starts by consumption of the unconfined macromolecules by the growing crystals followed by reconfiguration of macromolecules within the already grown spherulites.
Assuntos
Elastômeros , Polímeros , Cristalização , Conformação Molecular , Polímeros/química , TemperaturaRESUMO
Novel hybrid materials of the PB-b-P(o-Bn-L-Tyr) and PI-b-P(o-Bn-L-Tyr) type (where PB: 1,4/1,2-poly(butadiene), PI: 3,4/1,2/1,4-poly(isoprene) and P(o-Bn-L-Tyr): poly(ortho-benzyl-L-tyrosine)) were synthesized through anionic and ring-opening polymerization under high-vacuum techniques. All final materials were molecularly characterized through infrared spectroscopy (IR) and proton and carbon nuclear magnetic resonance (1H-NMR, 13C-NMR) in order to confirm the successful synthesis and the polydiene microstructure content. The stereochemical behavior of secondary structures (α-helices and ß-sheets) of the polypeptide segments combined with the different polydiene microstructures was also studied. The influence of the α-helices and ß-sheets, as well as the polydiene chain conformations on the thermal properties (glass transition temperatures, thermal stability, α- and ß-relaxation) of the present biobased hybrid copolymers, was investigated through differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dielectric spectroscopy (DS). The obtained morphologies in thin films for all the synthesized materials via atomic force microscopy (AFM) indicated the formation of polypeptide fibrils in the polydiene matrix.
RESUMO
A novel approach to obtaining nanocomposite materials using anionic sequential polymerization and post-synthetic esterification reactions with chemically modified graphene sheets (CMGs) is reported. The anionically synthesized diblock copolymer precursors of the PS-b-PI-OH type were grafted to the chemically modified -COOH groups of the CMGs, giving rise to the final composite materials, namely polystyrene-b-poly(isoprene)-g-CMGs, which exhibited enhanced physicochemical properties. The successful synthesis was determined through multiple molecular characterization techniques together with thermogravimetric analysis for the verification of increased thermal stability, and the structure/properties relationship was justified through transmission electron microscopy. Furthermore, the arrangement of CMGs utilizing lamellar and cylindrical morphologies was studied in order to determine the effect of the loaded CMGs in the adopted topologies.