Effect of Polymorphism on the Sorption Properties of a Flexible Square-Lattice Topology Coordination Network.

The stimulus-responsive behavior of coordination networks (CNs), which switch between closed (nonporous) and open (porous) phases, is of interest because of its potential utility in gas storage and separation. Herein, we report two polymorphs of a new square-lattice (sql) topology CN, X-sql-1-Cu, of formula [Cu(Imibz)2]n (HImibz = {[4-(1H-imidazol-1-yl)phenylimino]methyl}benzoic acid), isolated from the as-synthesized CN X-sql-1-Cu-(MeOH)2·2MeOH, which subsequently transformed to a narrow pore solvate, X-sql-1-Cu-A·MeOH, upon mild activation (drying in air or heating at 333 K under nitrogen). X-sql-1-Cu-A·MeOH contains MeOH in cavities, which was removed through exposure to vacuum for 2 h, yielding the nonporous (closed) phase X-sql-1-Cu-A. In contrast, a more dense polymorph, X-sql-1-Cu-B, was obtained by exposing X-sql-1-Cu-(MeOH)2·2MeOH directly to vacuum for 2 h. Gas sorption studies conducted on X-sql-1-Cu-A and X-sql-1-Cu-B revealed different switching behaviors to two open phases (X-sql-1-Cu·CO2 and X-sql-1-Cu·C2H2), with different gate-opening threshold pressures for CO2 at 195 K and C2H2 at 278 K. Coincident CO2 sorption and in situ powder X-ray diffraction studies at 195 K revealed that X-sql-1-Cu-A transformed to X-sql-1-Cu-B after the first sorption cycle and that the CO2-induced switching transformation was thereafter reversible. The results presented herein provide insights into the relationship between two polymorphs of a CN and the effect of polymorphism upon gas sorption properties. To the best of our knowledge, whereas sql networks such as X-sql-1-Cu are widely studied in terms of their structural and sorption properties, this study represents only the second example of an in-depth study of the sorption properties of polymorphic sql networks.

Metal cation substitution can tune CO2, H2O and CH4 switching pressure in transiently porous coordination networks.

Compared to rigid physisorbents, switching coordination networks that reversibly transform between closed (non-porous) and open (porous) phases offer promise for gas/vapour storage and separation owing to their improved working capacity and desirable thermal management properties. We recently introduced a coordination network, X-dmp-1-Co, which exhibits switching enabled by transient porosity. The resulting "open" phases are generated at threshold pressures even though they are conventionally non-porous. Herein, we report that X-dmp-1-Co is the parent member of a family of transiently porous coordination networks [X-dmp-1-M] (M = Co, Zn and Cd) and that each exhibits transient porosity but switching events occur at different threshold pressures for CO2 (0.8, 2.1 and 15 mbar, for Co, Zn and Cd, respectively, at 195 K), H2O (10, 70 and 75% RH, for Co, Zn and Cd, respectively, at 300 K) and CH4 (<2, 10 and 25 bar, for Co, Zn and Cd, respectively, at 298 K). Insight into the phase changes is provided through in situ SCXRD and in situ PXRD. We attribute the tuning of gate-opening pressure to differences and changes in the metal coordination spheres and how they impact dpt ligand rotation. X-dmp-1-Zn and X-dmp-1-Cd join a small number of coordination networks (<10) that exhibit reversible switching for CH4 between 5 and 35 bar, a key requirement for adsorbed natural gas storage.

Effect of Extra-Framework Anion Substitution on the Properties of a Chiral Crystalline Sponge.

Chiral metal-organic materials, CMOMs, are of interest as they can offer selective binding sites for chiral guests. Such binding sites can enable CMOMs to serve as chiral crystalline sponges (CCSs) to determine molecular structure and/or purify enantiomers. We recently reported on the chiral recognition properties of a homochiral cationic diamondoid, dia, network {[Ni(S-IDEC)(bipy)(H2O)][NO3]}n (S-IDEC = S-indoline-2-carboxylicate, bipy = 4,4'-bipyridine), CMOM-5[NO3]. The modularity of CMOM-5[NO3] means there are five feasible approaches to fine-tune structures and properties via substitution of one or more of the following components: metal cation (Ni2+); bridging ligand (S-IDEC); linker (bipy); extra-framework anion (NO3-); and terminal ligand (H2O). Herein, we report the effect of anion substitution on the CCS properties of CMOM-5[NO3] by preparing and characterizing {[Ni(S-IDEC)(bipy)(H2O)][BF4]}n, CMOM-5[BF4]. The chiral channels in CMOM-5[BF4] enabled it to function as a CCS for determination of the absolute crystal structures of both enantiomers of three chiral compounds: 1-phenyl-1-butanol (1P1B); methyl mandelate (MM); ethyl mandelate (EM). Chiral resolution experiments revealed CMOM-5[BF4] to be highly selective toward the S-isomers of MM and EM with enantiomeric excess, ee, values of 82.6 and 78.4%, respectively. The ee measured for S-EM surpasses the 64.3% exhibited by [DyNaL(H2O)4] 6H2O and far exceeds that of CMOM-5[NO3] (6.0%). Structural studies of the binding sites in CMOM-5[BF4] provide insight into their high enantioselectivity.

Water vapour and gas induced phase transformations in an 8-fold interpenetrated diamondoid metal-organic framework.

In this work, we report the synthesis, structural characterisation and sorption properties of an 8-fold interpenetrated diamondoid (dia) metal-organic framework (MOF) that is sustained by a new extended linker ligand, [Cd(Imibz)2], X-dia-2-Cd, HImibz or 2 = 4-((4-(1H-imidazol-1-yl)phenylimino)methyl)benzoic acid. X-dia-2-Cd was found to exhibit reversible single-crystal-to-single-crystal (SC-SC) transformations between four distinct phases: an as-synthesised (from N,N-dimethylformamide) wide-pore phase, X-dia-2-Cd-α; a narrow-pore phase, X-dia-2-Cd-ß, formed upon exposure to water; a narrow-pore phase obtained by activation, X-dia-2-Cd-γ; a medium-pore CO2-loaded phase X-dia-2-Cd-δ. While the space group remained constant in the four phases, the cell volumes and calculated void space ranged from 4988.7 Å3 and 47% (X-dia-2-Cd-α), respectively, to 3200.8 Å3 and 9.1% (X-dia-2-Cd-γ), respectively. X-dia-2-Cd-γ also exhibited a water vapour-induced structural transformation to the water-loaded X-dia-2-Cd-ß phase, resulting in an S-shaped sorption isotherm. The inflection point occurred at 18% RH with negligible hysteresis on the desorption profile. Water vapour temperature-humidity swing cycling (60% RH, 300 K to 0% RH, 333 K) indicated hydrolytic stability of X-dia-2-Cd and working capacity was retained after 128 cycles of sorbent regeneration. CO2 (at 195 K) was also observed to induce a structural transformation in X-dia-2-Cd-γ and in situ PXRD studies at 1 bar of CO2, 195 K revealed the formation of X-dia-2-Cd-δ, which exhibited 31% larger unit cell volume than X-dia-2-Cd-γ.

Control over Phase Transformations in a Family of Flexible Double Diamondoid Coordination Networks through Linker Ligand Substitution.

In this work, we present the first metal-organic framework (MOF) platform with a self-penetrated double diamondoid (ddi) topology that exhibits switching between closed (nonporous) and open (porous) phases induced by exposure to gases. A crystal engineering strategy, linker ligand substitution, was used to control gas sorption properties for CO2 and C3 gases. Specifically, bimbz (1,4-bis(imidazol-1-yl)benzene) in the coordination network X-ddi-1-Ni ([Ni2(bimbz)2(bdc)2(H2O)]n, H2bdc = 1,4-benzenedicarboxylic acid) was replaced by bimpz (3,6-bis(imidazol-1-yl)pyridazine) in X-ddi-2-Ni ([Ni2(bimpz)2(bdc)2(H2O)]n). In addition, the 1:1 mixed crystal X-ddi-1,2-Ni ([Ni2(bimbz)(bimpz)(bdc)2(H2O)]n) was prepared and studied. All three variants form isostructural closed (ß) phases upon activation which each exhibited different reversible properties upon exposure to CO2 at 195 K and C3 gases at 273 K. For CO2, X-ddi-1-Ni revealed incomplete gate-opening, X-ddi-2-Ni exhibited a stepped isotherm with saturation uptake of 3.92 mol·mol-1, and X-ddi-1,2-Ni achieved up to 62% more gas uptake and a distinct isotherm shape vs the parent materials. Single-crystal X-ray diffraction (SCXRD) and in situ powder X-ray diffraction (PXRD) experiments provided insight into the mechanisms of phase transformation and revealed that the ß phases are nonporous with unit cell volumes 39.9, 40.8, and 41.0% lower than the corresponding as-synthesized α phases, X-ddi-1-Ni-α, X-ddi-2-Ni-α, and X-ddi-1,2-Ni-α, respectively. The results presented herein represent the first report of reversible switching between closed and open phases in ddi topology coordination networks and further highlight how ligand substitution can profoundly impact the gas sorption properties of switching sorbents.

One Atom Can Make All the Difference: Gas-Induced Phase Transformations in Bisimidazole-Linked Diamondoid Coordination Networks.

Coordination networks (CNs) that undergo gas-induced transformation from closed (nonporous) to open (porous) structures are of potential utility in gas storage applications, but their development is hindered by limited control over their switching mechanisms and pressures. In this work, we report two CNs, [Co(bimpy)(bdc)]n (X-dia-4-Co) and [Co(bimbz)(bdc)]n (X-dia-5-Co) (H2bdc = 1,4-benzendicarboxylic acid; bimpy = 2,5-bis(1H-imidazole-1-yl)pyridine; bimbz = 1,4-bis(1H-imidazole-1-yl)benzene), that both undergo transformation from closed to isostructural open phases involving at least a 27% increase in cell volume. Although X-dia-4-Co and X-dia-5-Co only differ from one another by one atom in their N-donor linkers (bimpy = pyridine, and bimbz = benzene), this results in different pore chemistry and switching mechanisms. Specifically, X-dia-4-Co exhibited a gradual phase transformation with a steady increase in the uptake when exposed to CO2, whereas X-dia-5-Co exhibited a sharp step (type F-IV isotherm) at P/P0 ≈ 0.008 or P ≈ 3 bar (195 or 298 K, respectively). Single-crystal X-ray diffraction, in situ powder XRD, in situ IR, and modeling (density functional theory calculations, and canonical Monte Carlo simulations) studies provide insights into the nature of the switching mechanisms and enable attribution of pronounced differences in sorption properties to the changed pore chemistry.

Crystal Engineering of Two Light and Pressure Responsive Physisorbents.

An emerging strategy in the design of efficient gas storage technologies is the development of stimuli-responsive physisorbents which undergo transformations in response to a particular stimulus, such as pressure, heat or light. Herein, we report two isostructural light modulated adsorbents (LMAs) containing bis-3-thienylcyclopentene (BTCP), LMA-1 [Cd(BTCP)(DPT)2 ] (DPT=2,5-diphenylbenzene-1,4-dicarboxylate) and LMA-2 [Cd(BTCP)(FDPT)2 ] (FDPT=5-fluoro-2,diphenylbenzene-1,4-dicarboxylate). Both LMAs undergo pressure induced switching transformations from non-porous to porous via adsorption of N2 , CO2 and C2 H2 . LMA-1 exhibited multi-step adsorption while LMA-2 showed a single-step adsorption isotherm. The light responsive nature of the BTPC ligand in both frameworks was exploited with irradiation of LMA-1 resulting in a 55 % maximum reduction of CO2 uptake at 298 K. This study reports the first example of a switching sorbent (closed to open) that can be further modulated by light.

Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity.

Flexible metal-organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.

Structural Phase Transformations Induced by Guest Molecules in a Nickel-Based 2D Square Lattice Coordination Network.

Herein, we report the crystal structure and guest binding properties of a new two-dimensional (2D) square lattice (sql) topology coordination network, sql-(azpy)(pdia)-Ni, which is comprised of two linker ligands with diazene (azo) moieties, (E)-1,2-di(pyridin-4-yl)diazene(azpy) and (E)-5-(phenyldiazenyl)isophthallate(pdia). sql-(azpy)(pdia)-Ni underwent guest-induced switching between a closed (nonporous) ß phase and several open (porous) α phases, but unlike the clay-like layer expansion to distinct phases previously reported in switching sql networks, a continuum of phases was formed. In effect, sql-(azpy)(pdia)-Ni exhibited elastic-like properties induced by adaptive guest binding. Single-crystal X-ray diffraction (SCXRD) studies of the α phases revealed that the structural transformations were enabled by the pendant phenyldiazenyl moiety on the pdia2- ligand. This moiety functioned as a type of hinge to enable parallel slippage of layers and interlayer expansion for the following guests: N,N-dimethylformamide, water, dichloromethane, para-xylene, and ethylbenzene. The slippage angle (interplanar distances) ranged from 54.133° (4.442 Å) in the ß phase to 69.497° (5.492 Å) in the ethylbenzene-included phase. Insight into the accompanying phase transformations was also gained from variable temperature powder XRD studies. Dynamic water vapor sorption studies revealed a stepped isotherm with little hysteresis that was reversible for at least 100 cycles. The isotherm step occurred at ca. 50% relative humidity (RH), the optimal RH value for humidity control.

Solvent-controlled elongation and mechanochemical strain in a metal-organic framework.

Under high pressure, crystals of [Zn(m-btcp)2(bpdc)2]·2DMF·H2O, referred to as DMOF are particularly sensitive to the type of pressure-transmitting media (PTM) employed: large PTM molecules seal the pores and DMOF is compressed as a closed system, whereas small PTM molecules are pushed into the pores, thereby altering the stoichiometry of DMOF. Compression in glycerol and Daphne 7474 leads to negative linear compressibility (NLC), while a mixture of methanol : ethanol : water 'hyperfills' the pores of the chiral framework, adjusting its 3-dimensional strain and resulting in pressure-induced amorphization around 1.2 GPa. The uptake of the small-molecule PTM strongly increases the dimensions of DMOF in the direction perpendicular to that of the NLC of the crystal.

Large negative linear compressibility of a porous molecular co-crystal.

Flexible and transformable molecules, particularly those responding to external stimuli, are needed for designing sensors and porous compounds capable of storing or separating gases and liquids. Under normal conditions the photochromic compound, 1,2-bis[2-methyl-5-(pyridyl)-3thienyl]cyclopentene (BTCP) forms a porous co-crystal with 1,4-diiodotetrafluorobenzene (dItFB). It traps acetone (Ac) molecules in the pores. Owing to a unique system of pores in the polar framework, the crystal is sensitive to the humidity in the air and to the chosen liquid environment. When compressed in non-penetrating media, the crystal displays a strong negative linear compressibility (NLC) along [100].

Record-Setting Selectivity for p-Xylene by an Intrinsically Porous Zero-Dimensional Metallocycle.

In its crystalline state, a dinuclear Cu-based metallocycle discriminates between the three isomers of xylene with liquid-phase selectivity in the order p-xylene ≫ m-xylene ≫ o-xylene. This selectivity holds over a wide concentration range, with p-xylene concentrations as low as 5%. Single-crystal X-ray diffraction and gas chromatography further indicate that the metallocyclic host extracts trace amounts of p-xylene from commercially pure o-xylene (≥99%); using NMR spectroscopy, we show that the metallocycle exhibits exclusive selectivity for p-xylene. Crystallographic studies show that the selectivity is based on the size and shape of the guest in combination with the flexibility of the host.

Solvent-Mediated Synthesis of Cyclobutane Isomers in a Photoactive Cadmium(II) Porous Coordination Polymer.

Photochemical [2+2] cycloaddition of 1,4-bis[2-(4-pyridyl)ethenyl]benzene, carried out in a CdII porous coordination polymer (PCP), produces different isomeric products depending on the guest solvent present in the PCP during irradiation. The nature of the included guest influences the conformation of the ligand, and thus the outcome of the cycloaddition reaction. We demonstrate controlled production of the two isomers from the same PCP by simple exchange of solvent.

Single-Crystal to Single-Crystal Uptake of Volatile Solids and Associated Chromatic Response in a Porous Metallocycle.

Guest molecules have been absorbed into crystals of a metallocyclic host by sublimation of volatile solids at room temperature. The guest exchanges are accompanied by color changes. Since the crystals remain intact, evidence of guest inclusion could be obtained using single-crystal X-ray diffraction. The results are also supported by thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), and ultraviolet-visible spectroscopy (UV-vis).

Guest-Induced Structural Transformations in a Porous Halogen-Bonded Framework.

Structural evidence obtained from in situ X-ray diffraction shows that halogen bonding is responsible for the formation of a dynamic porous molecular solid. This material is surprisingly robust and undergoes reversible switching of its pore volume by activation or by exposure to a series of gases of different sizes and shapes. Volumetric gas sorption and pressure-gradient differential scanning calorimetry (P-DSC) data provide further mechanistic insight into the breathing behavior.

Supramolecular solvatochromism: mechanistic insight from crystallography, spectroscopy and theory.

A solvatochromic dinuclear copper(ii) metallocycle effectively traps tetrahydrofuran, diethyl ether and pentane significantly above their boiling points. X-ray crystallography, EPR and UV-visible spectroscopy were used to delineate an empirical relationship between the guest-induced structural perturbation of the metallocycle, the ligand field splitting parameter Δ (νmax), and the EPR g-values of the inclusion compounds, thereby elucidating the solvatochromic mechanism.

Threading the needle: guest transport in a versatile 0D porous molecular crystal.

Porous host crystals of the metallocycle [Cu2(1,3-bis(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene)2Cl4]·2CH3OH are permeable to a series of small organic guests despite their lack of permanent channels. It is inferred from single crystal X-ray diffraction that transport of the guest molecules is facilitated by "flapping" of the imidazolyl rings.

Inclusion of a dithiadiazolyl radical in a seemingly non-porous solid.

Inclusion of the dithiadiazolyl radical PhCNSSN˙ into the dynamically porous metallocycle [Cu2(L1)2Cl4], where L1 is the bidentate ligand 1,3-bis(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, has been achieved by gas phase diffusion. Single crystal X-ray diffraction, powder X-ray diffraction, UV-visible spectroscopy, EPR and SQUID magnetometry studies confirm inclusion of the radical into this seemingly non-porous material, and illustrate the antiferromagnetic coupling between the paramagnetic host and guest species. The radical guest is readily released by heating or by the addition of solvent (CH2Cl2).

Reversible structural switching of a metal-organic framework by photoirradiation.

A photoresponsive metal organic framework material undergoes switching of its pore volume and sorption capacity. UV irradiation of the crystals causes cyclisation within the bis-thienylcyclopentene bridging ligands, thereby altering the node positions relative to one another along the Zn-L-Zn linkages. Incorporation of conformational flexibility into the dicarboxylic acid co-ligands facilitates the change in the framework geometry enforced by photocyclisation.

1,2-Bis[(2,2':6',2''-terpyridin-4'-yl)-oxy]ethane.

The title compound, C(32)H(24)N(6)O(2), has an inversion centre located at the mid-point of the central C-C bond of the diether bridging unit. The terminal pyridine rings are canted relative to the central pyridine ring, with dihedral angles of 12.98 (6) and 26.80 (6)°. The maximum deviation from the eight-atom mean plane, defined by the two bridging O and C atoms and the central pyridine ring, is 0.0383 (10)° for the N atom.