Nonclassical Crystal Growth of Supramolecular Polymers in Aqueous Medium.

A mechanistic understanding of the principles governing the hierarchical organization of supramolecular polymers offers a paradigm for tailoring synthetic molecular architectures at the nano to micrometric scales. Herein, the unconventional crystal growth mechanism of a supramolecular polymer of superbenzene(coronene)-diphenylalanine conjugate (Cr-FFOEt ) is demonstrated. 3D electron diffraction (3D ED), a technique underexplored in supramolecular chemistry, is effectively utilized to gain a molecular-level understanding of the gradual growth of the initially formed poorly crystalline hairy, fibril-like supramolecular polymers into the ribbon-like crystallites. The further evolution of these nanosized flat ribbons into microcrystals by oriented attachment and lateral fusion is probed by time-resolved microscopy and electron diffraction. The gradual morphological and structural changes reveal the nonclassical crystal growth pathway, where the balance of strong and weak intermolecular interactions led to a structure beyond the nanoscale. The role of distinct π-stacking and H-bonding interactions that drive the nonclassical crystallization process of Cr-FFOEt supramolecular polymers is analyzed in comparison to analogous molecules, Py-FFOEt and Cr-FF forming helical and twisted fibers, respectively. Furthermore, the Cr-FFOEt crystals formed through nonclassical crystallization are found to improve the functional properties.

Thermodynamics of the swelling work of wood and non-ionic polysaccharides: A revisit.

Polysaccharides, even non-ionic ones, swell in water with potentially huge pressure, which can be sources of intended actuation or a cause of structural damage. The swelling pressure has been investigated since the 19th century, and thermodynamic considerations developed at the beginning of the 20th century. Such treatment is revisited with currently available data showing the swelling to be mostly enthalpy driven. The molecular origin of the heat of swelling is discussed, considering the specificity of polysaccharides or biopolymers with relatively stiff chain conformation that contradicts the compact packing of enthalpy stabilization. Part of the heat of swelling, and thus the potential work of swelling, would originate from the elastic energy stored in the rigid structure. This vision can be tested in the conception of actuation or control of swelling.

Residual Strain and Nanostructural Effects during Drying of Nanocellulose/Clay Nanosheet Hybrids: Synchrotron X-ray Scattering Results.

Cellulose nanofibrils (CNF) with 2D silicate nanoplatelet reinforcement readily form multifunctional composites by vacuum-assisted self-assembly from hydrocolloidal mixtures. The final nanostructure is formed during drying. The crystalline nature of CNF and montmorillonite (MTM) made it possible to use synchrotron X-ray scattering (WAXS, SAXS) to monitor structural development during drying from water and from ethanol. Nanostructural changes in the CNF and MTM crystals were investigated. Changes in the out-of-plane orientation of CNF and MTM were determined. Residual drying strains previously predicted from theory were confirmed in both cellulose and MTM platelets due to capillary forces. The formation of tactoid platelet stacks could be followed. We propose that after filtration, the constituent nanoparticles in the swollen, solid gel already have a "fixed" location, although self-assembly and ordering processes take place during drying.

Processing strategy for reduced energy demand of nanostructured CNF/clay composites with tailored interfaces.

Nacre-mimicking nanocomposites based on colloidal cellulose nanofibrils (CNFs) and clay nanoparticles show excellent mechanical properties, yet processing typically involves preparation of two colloids followed by a mixing step, which is time- and energy-consuming. In this study, a facile preparation method using low energy kitchen blenders is reported in which CNF disintegration, clay exfoliation and mixing carried out in one step. Compared to composites made from the conventional method, the energy demand is reduced by about 97 %; the composites also show higher strength and work to fracture. Colloidal stability, CNF/clay nanostructure, and CNF/clay orientation are well characterized. The results suggest favorable effects from hemicellulose-rich, negatively charged pulp fibers and corresponding CNFs. CNF disintegration and colloidal stability are facilitated with substantial CNF/clay interfacial interaction. The results show a more sustainable and industrially relevant processing concept for strong CNF/clay nanocomposites.

Structural Anisotropy Governs the Kink Formation in Cellulose Nanocrystals.

Understanding the defect structure is fundamental to correlating the structure and properties of materials. However, little is known about the defects of soft matter at the nanoscale beyond their external morphology. We report here on the molecular-level structural details of kink defects of cellulose nanocrystals (CNCs) based on a combination of experimental and theoretical methods. Low-dose scanning nanobeam electron diffraction analysis allowed for correlation of the local crystallographic information and nanoscale morphology and revealed that the structural anisotropy governed the kink formation of CNCs. We identified two bending modes along different crystallographic directions with distinct disordered structures at kink points. The drying strongly affected the external morphology of the kinks, resulting in underestimating the kink population in the standard dry observation conditions. These detailed defect analyses improve our understanding of the structural heterogeneity of nanocelluloses and contribute to the future exploitation of soft matter defects.

The thermodynamics of enhanced dope stability of cellulose solution in NaOH solution by urea.

The addition of urea in pre-cooled alkali aqueous solution is known to improve the dope stability of cellulose solution. However, its thermodynamic mechanism at a molecular level is not fully understood yet. By using molecular dynamics simulation of an aqueous NaOH/urea/cellulose system using an empirical force field, we found that urea was concentrated in the first solvation shell of the cellulose chain stabilized mainly by dispersion interaction. When adding a glucan chain into the solution, the total solvent entropy reduction is smaller if urea is present. Each urea molecule expelled an average of 2.3 water molecules away from the cellulose surface, releasing water entropy that over-compensates the entropy loss of urea and thus maximizing the total entropy. Scaling the Lennard-Jones parameter and atomistic partial charge of urea revealed that direct urea/cellulose interaction was also driven by dispersion energy. The mixing of urea solution and cellulose solution in the presence or absence of NaOH are both exothermic even after correcting for the contribution from dilution.

Untangling the threads of cellulose mercerization.

Naturally occurring plant cellulose, our most abundant renewable resource, consists of fibers of long polymer chains that are tightly packed in parallel arrays in either of two crystal phases collectively referred to as cellulose I. During mercerization, a process that involves treatment with sodium hydroxide, cellulose goes through a conversion to another crystal form called cellulose II, within which every other chain has remarkably changed direction. We designed a neutron diffraction experiment with deuterium labelling in order to understand how this change of cellulose chain direction is possible. Here we show that during mercerization of bacterial cellulose, chains fold back on themselves in a zigzag pattern to form crystalline anti-parallel domains. This result provides a molecular level understanding of one of the most widely used industrial processes for improving cellulosic materials.

Edge-On (Cellulose II) and Face-On (Cellulose I) Adsorption of Cellulose Nanocrystals at the Oil-Water Interface: A Combined Entropic and Enthalpic Process.

Nanocelluloses can be used to stabilize oil-water surfaces, forming so-called Pickering emulsions. In this work, we compare the organization of native and mercerized cellulose nanocrystals (CNC-I and CNC-II) adsorbed on the surface of hexadecane droplets dispersed in water at different CNC concentrations. Both types of CNCs have an elongated particle morphology and form a layer strongly adsorbed at the interface. However, while the layer thickness formed with CNC-I is independent of the concentration at 7 nm, CNC-II forms a layer ranging from 9 to 14 nm thick with increasing concentration, as determined using small-angle neutron scattering with contrast-matched experiments. Molecular dynamics (MD) simulations showed a preferred interacting crystallographic plane for both crystalline allomorphs that exposes the CH groups (100 and 010) and is therefore considered hydrophobic. Furthermore, this study suggests that whatever the allomorph, the migration of CNCs to the oil-water interface is spontaneous and irreversible and is driven by both enthalpic and entropic processes.

Crystallography of polysaccharides: Current state and challenges.

Polysaccharides are the most abundant class of biopolymers, holding an important place in biological systems and sustainable material development. Their spatial organization and intra- and intermolecular interactions are thus of great interest. However, conventional single crystal crystallography is not applicable since polysaccharides crystallize only into tiny crystals. Several crystallographic methods have been developed to extract atomic-resolution structural information from polysaccharide crystals. Small-probe single crystal diffractometry, high-resolution fiber diffraction and powder diffraction combined with molecular modeling brought new insights from various types of polysaccharide crystals, and led to many high-resolution crystal structures over the past two decades. Current challenges lie in the analysis of disorder and defects by further integrating molecular modeling methods for low-resolution diffraction data.

Quantifying the Contribution of the Dispersion Interaction and Hydrogen Bonding to the Anisotropic Elastic Properties of Chitin and Chitosan.

The elastic tensors of chitin and chitosan allomorphs were calculated using density functional theory (DFT) with and without the dispersion correction and compared with experimental values. The longitudinal Young's moduli were 114.9 or 126.9 GPa for α-chitin depending on the hydrogen bond pattern: 129.0 GPa for ß-chitin and 191.5 GPa for chitosan. Furthermore, the moduli were found to vary between 17.0 and 52.8 GPa in the transverse directions and between 2.2 and 15.2 GPa in shear. Switching off the dispersion correction led to a decrease in modulus by up to 63%, depending on the direction. The transverse Young's moduli of α-chitin strongly depended on the hydroxylmethyl group conformation coupled with the dispersion correction, suggesting a synergy between hydrogen bonding and dispersion interactions. The calculated longitudinal Young's moduli were, in general, higher than experimental values obtained in static conditions, and the Poisson's ratios were lower than experimental values obtained in static conditions.

Recyclable nanocomposites of well-dispersed 2D layered silicates in cellulose nanofibril (CNF) matrix.

Nanocomposites based on components from nature, which can be recycled are of great interest in new materials for sustainable development. The range of properties of nacre-inspired hybrids of 1D cellulose and 2D clay platelets are investigated in nanocomposites with improved nanoparticle dispersion in the starting hydrocolloid mixture. Films with a wide range of compositions are prepared by capillary force assisted physical assembly (vacuum-assisted filtration) of TEMPO-oxidized cellulose nanofibers (TOCN) reinforced by exfoliated nanoclays of three different aspect ratios: saponite, montmorillonite and mica. X-ray diffraction and transmission electron micrographs show almost monolayer dispersion of saponite and montmorillonite and high orientation parallel to the film surface. Films exhibit ultimate strength up to 573 MPa. Young's modulus exceeds 38 GPa even at high MTM contents (40-80 vol%). Optical transmittance, UV-shielding, thermal shielding and fire-retardant properties are measured, found to be very good and are sensitive to the 2D nanoplatelet dispersion.

Combining computational and experimental studies for a better understanding of cellulose and its analogs.

Over the last decade, the structural refinement of cellulose allomorphs and their analogs has been advanced using high-resolution fiber diffraction. This also includes structures of crystals complexed with small molecules, which can inherently involve disorders. Computational methods, including density functional theory, in combination with molecular modeling are leading to improved structural analyses. Spectroscopic techniques such as vibrational spectroscopy give quantitative and robust data directly related to structural insights on cellulose. These data will benefit from improved molecular modeling's capacity for interpretation and will also serve as a gauge to measure the capacity of molecular modeling as an aid in structural determinations. Improvement in the capacity to directly simulate experimental data such as that from scattering, diffraction, and spectra will be the key for further integration of modeling and experimental approaches.

Direct Evidence for Aligned Binding of Cellulase Enzymes to Cellulose Surfaces.

The conversion of biomass into green fuels and chemicals is of great societal interest. Engineers have been designing new cellulase enzymes for the breakdown of otherwise insoluble cellulose materials. A barrier to the rational design of new enzymes has been our lack of a molecular picture of how cellulase binding occurs. A critical factor is the attachment via the enzyme's carbohydrate binding module (CBM). To elucidate the structural and mechanistic details of cellulase adsorption, we have combined experimental data from sum frequency generation spectroscopy with molecular dynamics simulations to probe the equilibrium structure and surface alignment of a 14-residue peptide mimicking the CBM. The data show that binding is driven by hydrogen bonding and that tyrosine side chains within the CBM align the cellulase with the registry of the cellulose surface. Such an alignment is favorable for the translocation and effective cellulose breakdown and is therefore likely an important parameter for the design of novel enzymes.

Solvent-Assisted Fractionation of Oligomeric Cellulose and Reversible Transformation of Cellulose II and IV.

Oligomeric cellulose with an average degree of polymerization of 7.68 and a polydispersity of 1.04 has been fractionated using solution processes. Three fractions have been obtained through initial dissolution, subsequent crystallization, and solvent precipitation, respectively. The resulting oligocellulose fraction has an average degree of polymerization of 7.70 and a polydispersity of 1.01, respectively. Cellulose IV2 crystals form in the oligocellulose fraction, and reversibly transform to II and back to IV using simple solvents.

Time-Dependent Elastic Tensor of Cellulose Nanocrystal Probed by Hydrostatic Pressure and Uniaxial Stretching.

The elastic properties of crystals are fundamental for structural material. However, in the absence of macroscopic single crystals, the experimental determination of the elastic tensor is challenging because the measurement depends on the transmission of stress inside the material. To avoid arbitrary hypotheses about stress transfer, we combine hydrostatic pressure and uniaxial-stretching experiments to investigate the elastic properties of cellulose Iß. Three orthogonal compressibilities are 50.0, 6.6, and 1.71 TPa-1. Combining Poisson's ratios from a uniaxial stretching experiment directly gives the Young's modulus along the chain direction (E33). However, Poisson's ratio depends on the deformation rate leading to apparent modulus E33 = 113 GPa using a slow cycle (hours) and 161 GPa using a fast cycle (minutes). The lattice deformation along the chain is not time-dependent, so the off-diagonal elements are time-dependent on the scale of minutes to hours.

Crystal and molecular structure of V-amylose complexed with ibuprofen.

Rectangular V-amylose single crystals were prepared by adding racemic ibuprofen to hot dilute aqueous solutions of native and enzymatically-synthesized amylose. The lamellar thickness increased with increasing degree of polymerization of amylose and reached a plateau at about 7 nm, consistent with a chain-folding mechanism. The CP/MAS NMR spectrum as well as base-plane electron and powder X-ray diffraction patterns recorded from hydrated specimens were similar to those of V-amylose complexed with propan-2-ol. Amylose was crystallized in an orthorhombic unit cell with parameters a = 2.824 ± 0.001 nm, b = 2.966 ± 0.001 nm, and c = 0.800 ± 0.001 nm. A molecular model was proposed based on structural analogies with the Vpropan-2-ol complex and on assumptions on the stoichiometry of ibuprofen. The unit cell would contain four antiparallel 7-fold amylose single helices with ibuprofen molecules distributed inside and between the helices.

Small Angle Neutron Scattering Shows Nanoscale PMMA Distribution in Transparent Wood Biocomposites.

Transparent wood biocomposites based on PMMA combine high optical transmittance with excellent mechanical properties. One hypothesis is that despite poor miscibility the polymer is distributed at the nanoscale inside the cell wall. Small-angle neutron scattering (SANS) experiments are performed to test this hypothesis, using biocomposites based on deuterated PMMA and "contrast-matched" PMMA. The wood cell wall nanostructure soaked in heavy water is quantified in terms of the correlation distance d between the center of elementary cellulose fibrils. For wood/deuterated PMMA, this distance d is very similar as for wood/heavy water (correlation peaks at q ≈ 0.1 Å-1). The peak disappears when contrast-matched PMMA is used, indeed proving nanoscale polymer distribution in the cell wall. The specific processing method used for transparent wood explains the nanocomposite nature of the wood cell wall and can serve as a nanotechnology for cell wall impregnation of polymers in large wood biocomposite structures.

Bottom-up Construction of Xylan Nanocrystals in Dimethyl Sulfoxide.

A new type of polysaccharide (hemicellulose) nanocrystal, bearing the shape of an anisotropic nanoflake, emerged from a dimethyl sulfoxide (DMSO) dispersion of wood-based xylan through heat-induced crystallization. The dimensions of these xylan nanocrystals were controlled by the crystallization conditions. Sharp signals in solid-state NMR indicated a well-ordered crystal structure. The unit cell is constituted of two asymmetric xylose residues, and DMSO molecules resided in a host-guest type of arrangement with more than one local environment. This corroborates with the identical 1H NMR relaxation time between DMSO and xylan, indicative of intimate mixing of the two at the tens of nanometer length scale. X-ray and electron diffraction indicated a 2-fold helical helix along the chain in a monoclinic unit cell with an antiparallel arrangement, with chains placed on the 2-fold helix axes: at the corner and at the center. The 2-fold helical structure is unique for xylan for which only a 3-fold helical form has been reported. The DMSO molecules participated in the crystallization, and they were shown to be vital in stabilizing the crystalline structure. The manipulation of temperature, concentration, and incubation time of the xylan/DMSO dispersion provided pathways for the crystallization to form size-adjustable nanocrystals. As 20-30% of biomass consists of hemicelluloses, this work will serve as a starting point to understand the controlled assembly of hemicelluloses to discover their full application potential.

Supramolecular Assembly and Chirality of Synthetic Carbohydrate Materials.

Hierarchical carbohydrate architectures serve multiple roles in nature. Hardly any correlations between the carbohydrate chemical structures and the material properties are available due to the lack of standards and suitable analytic techniques. Therefore, designer carbohydrate materials remain highly unexplored, as compared to peptides and nucleic acids. A synthetic D-glucose disaccharide, DD, was chosen as a model to explore carbohydrate materials. Microcrystal electron diffraction (MicroED), optimized for oligosaccharides, revealed that DD assembled into highly crystalline left-handed helical fibers. The supramolecular architecture was correlated to the local crystal organization, allowing for the design of the enantiomeric right-handed fibers, based on the L-glucose disaccharide, LL, or flat lamellae, based on the racemic mixture. Tunable morphologies and mechanical properties suggest the potential of carbohydrate materials for nanotechnology applications.

Distinguishing Mesoscale Polar Order (Unidirectional vs Bidirectional) of Cellulose Microfibrils in Plant Cell Walls Using Sum Frequency Generation Spectroscopy.

Cellulose in plant cell walls are synthesized as crystalline microfibrils with diameters of 3-4 nm and lengths of around 1-10 µm. These microfibrils are known to be the backbone of cell walls, and their multiscale three-dimensional organization plays a critical role in cell wall functions including plant growth and recalcitrance to degradation. The mesoscale organization of microfibrils over a 1-100 nm range in cell walls is challenging to resolve because most characterization techniques investigating this length scale suffer from low spatial resolution, sample preparation artifacts, or inaccessibility of specific cell types. Here, we report a sum frequency generation (SFG) study determining the mesoscale polarity of cellulose microfibrils in intact plant cell walls. SFG is a nonlinear optical spectroscopy technique sensitive to the molecular-to-mesoscale order of noncentrosymmetric domains in amorphous matrices. However, the quantitative theoretical model to unravel the effect of polarity in packing of noncentrosymmetric domains on SFG spectral features has remained unresolved. In this work, we show how the phase synchronization principle of the SFG process is used to predict the relative intensities of vibrational modes with different polar angles from the noncentrosymmetric domain axis. Applying this model calculation for the first time and employing SFG microscopy, we found that cellulose microfibrils in certain xylem cell walls are deposited unidirectionally (or biased in one direction) instead of the bidirectional polarity which was believed to be dominant in plant cell walls from volume-averaged characterizations of macroscopic samples. With this advancement in SFG analysis, one can now determine the relative polarity of noncentrosymmetric domains such as crystalline biopolymers interspersed in amorphous polymer matrices, which will open opportunities to study new questions that have not been conceived in the past.