Carboxymethyl chitosan dopamine conjugates: Synthesis and evaluation for intranasal anti Parkinson therapy.

With respect to the Parkinson's disease (PD), herein, we aimed at synthetizing and characterizing two novel macromolecular conjugates where dopamine (DA) was linked to N,O-carboxymethyl chitosan or O-carboxymethyl chitosan, being both conjugates obtained from an organic solvent free synthetic procedure. They were characterized by FT-IR, 1H NMR spectroscopies, whereas thermal analysis (including Differential Scanning Calorimetry and Thermal Gravimetric Analysis) revealed good stability of the two conjugates after exposure at temperatures close to 300 °C. Release studies in simulated nasal fluid elucidated that a faster release occurred since O-carboxymethyl chitosan-DA conjugate maybe due to the less steric hindrance exerted by the polymeric moiety. The CMCS-DA conjugates prepared in aqueous medium may self-assembly to form polymeric micelles and/or may form polymeric nanoparticles. TEM and Photon correlation spectroscopy lent support for polymeric nanoparticle formation. Moreover, such CMCS-DA conjugates showed antioxidant activity, as demonstrated by DPPH radical scavenging assay. Finally, cytocompatibility studies with neuroblastoma SH-SY5Y cells showed no cytotoxicity of both conjugates, whereas their uptake increased from 2.5 to 24 h and demonstrated in 40-66 % of cells.

Partial Chemicalization of Nanoscale Metals: An Intra-Material Transformative Approach for the Synthesis of Functional Colloidal Metal-Semiconductor Nanoheterostructures.

Heterostructuring colloidal nanocrystals into multicomponent modular constructs, where domains of distinct metal and semiconductor phases are interconnected through bonding interfaces, is a consolidated approach to advanced breeds of solution-processable hybrid nanomaterials capable of expressing richly tunable and even entirely novel physical-chemical properties and functionalities. To meet the challenges posed by the wet-chemical synthesis of metal-semiconductor nanoheterostructures and to overcome some intrinsic limitations of available protocols, innovative transformative routes, based on the paradigm of partial chemicalization, have recently been devised within the framework of the standard seeded-growth scheme. These techniques involve regiospecific replacement reactions on preformed nanocrystal substrates, thus holding great synthetic potential for programmable configurational diversification. This review article illustrates achievements so far made in the elaboration of metal-semiconductor nanoheterostructures with tailored arrangements of their component modules by means of conversion pathways that leverage on spatially controlled partial chemicalization of mono- and bi-metallic seeds. The advantages and limitations of these approaches are discussed within the context of the most plausible mechanisms underlying the evolution of the nanoheterostructures in liquid media. Representative physical-chemical properties and applications of chemicalization-derived metal-semiconductor nanoheterostructures are emphasized. Finally, prospects for developments in the field are outlined.

Enhanced Delivery of 5-Aminolevulinic Acid by Lecithin Invasomes in 3D Melanoma Cancer Model.

Photodynamic therapy (PDT) is a noninvasive therapeutic approach for the treatment of skin cancer and diseases. 5-Aminolevulinic acid is a prodrug clinically approved for PDT. Once internalized by cancer cells, it is rapidly metabolized to the photosensitizer protoporphyrin IX, which under the proper light irradiation, stimulates the deleterious reactive oxygen species (ROS) production and leads to cell death. The high hydrophilicity of 5-aminolevulinic acid limits its capability to cross the epidermis. Lipophilic derivatives of 5-aminolevulinic acid only partly improved skin penetration, thus making its incorporation into nanocarriers necessary. Here we have developed and characterized 5-aminolevulinic acid loaded invasomes made of egg lecithin, either 1,2-dilauroyl-sn-glycero-3-phosphocholine or 1,2-dioleoyl-sn-glycero-3-phosphocholine, and the terpene limonene. The obtained invasomes are highly thermostable and display a spherical morphology with an average size of 150 nm and an encapsulation efficiency of 80%; moreover, the ex vivo epidermis diffusion tests established that nanovesicles containing the terpene led to a much higher skin penetration (up to 80% in 3 h) compared to those without limonene and to the free fluorescent tracer (less than 50%). Finally, in vitro studies with 2D and 3D human cell models of melanoma proved the biocompatibility of invasomes, the enhanced intracellular transport of 5-aminolevulinic acid, its ability to generate ROS upon irradiation, and consequently, its antiproliferative effect. A simplified scaffold-based 3D skin model containing melanoma spheroids was also prepared. Considering the results obtained, we conclude that the lecithin invasomes loaded with 5-aminolevulinic acid have a good therapeutic potential and may represent an efficient tool that can be considered a valid alternative in the topical treatment of melanoma and other skin diseases.

Synthetic Approaches to Colloidal Nanocrystal Heterostructures Based on Metal and Metal-Oxide Materials.

Composite inorganic nanoarchitectures, based on combinations of distinct materials, represent advanced solid-state constructs, where coexistence and synergistic interactions among nonhomologous optical, magnetic, chemical, and catalytic properties lay a basis for the engineering of enhanced or even unconventional functionalities. Such systems thus hold relevance for both theoretical and applied nanotechnology-based research in diverse areas, spanning optics, electronics, energy management, (photo)catalysis, biomedicine, and environmental remediation. Wet-chemical colloidal synthetic techniques have now been refined to the point of allowing the fabrication of solution free-standing and easily processable multicomponent nanocrystals with sophisticated modular heterostructure, built upon a programmed spatial distribution of the crystal phase, composition, and anchored surface moieties. Such last-generation breeds of nanocrystals are thus composed of nanoscale domains of different materials, assembled controllably into core/shell or heteromer-type configurations through bonding epitaxial heterojunctions. This review offers a critical overview of achievements made in the design and synthetic elaboration of colloidal nanocrystal heterostructures based on diverse associations of transition metals (with emphasis on plasmonic metals) and transition-metal oxides. Synthetic strategies, all leveraging on the basic seed-mediated approach, are described and discussed with reference to the most credited mechanisms underpinning regioselective heteroepitaxial deposition. The unique properties and advanced applications allowed by such brand-new nanomaterials are also mentioned.

Monodisperse and Nanometric-Sized Calcium Carbonate Particles Synthesis Optimization.

Calcium carbonate (CaCO3) particles represent an appealing choice as a drug delivery system due to their biocompatibility, biodegradability, simplicity and cost-effectiveness of manufacturing, and stimulus-responsiveness. Despite this, the synthesis of CaCO3 particles with controlled size in the nanometer range via a scalable manufacturing method remains a major challenge. Here, by using a co-precipitation technique, we investigated the impact on the particle size of different synthesis parameters, such as the salt concentration, reaction time, stirring speed, and temperature. Among them, the salt concentration and temperature resulted in having a remarkable effect on the particle size, enabling the preparation of well-dispersed spherical nanoparticles with a size below 200 nm. Upon identification of optimized synthesis conditions, the encapsulation of the antitumoral agent resveratrol into CaCO3 nanoparticles, without significantly impacting the overall size and morphology, has been successfully achieved.

Colloidal Bismuth Chalcohalide Nanocrystals.

Here we present a colloidal approach to synthesize bismuth chalcohalide nanocrystals (BiEX NCs, in which E=S, Se and X=Cl, Br, I). Our method yields orthorhombic elongated BiEX NCs, with BiSCl crystallizing in a previously unknown polymorph. The BiEX NCs display a composition-dependent band gap spanning the visible spectral range and absorption coefficients exceeding 105  cm-1 . The BiEX NCs show chemical stability at standard laboratory conditions and form colloidal inks in different solvents. These features enable the solution processing of the NCs into robust solid films yielding stable photoelectrochemical current densities under solar-simulated irradiation. Overall, our versatile synthetic protocol may prove valuable in accessing colloidal metal chalcohalide nanomaterials at large and contributes to establish metal chalcohalides as a promising complement to metal chalcogenides and halides for applied nanotechnology.

Pulsed Laser Deposition of CsPbBr3 Films: Impact of the Composition of the Target and Mass Distribution in the Plasma Plume.

All-inorganic cesium lead bromine (CsPbBr3) perovskites have gained a tremendous potential in optoelectronics due to interesting photophysical properties and much better stability than the hybrid counterparts. Although pulsed laser deposition (PLD) is a promising alternative to solvent-based and/or thermal deposition approaches due to its versatility in depositing multi-elemental materials, deep understanding of the implications of both target composition and PLD mechanisms on the properties of CsPbBr3 films is still missing. In this paper, we deal with thermally assisted preparation of mechano-chemically synthesized CsPbBr3 ablation targets to grow CsPbBr3 films by PLD at the fluence 2 J/cm2. We study both Cs rich- and stoichiometric PbBr2-CsBr mixture-based ablation targets and point out compositional deviations of the associated films resulting from the mass distribution of the PLD-generated plasma plume. Contrary to the conventional meaning that PLD guarantees congruent elemental transfer from the target to the substrate, our study demonstrates cation off-stoichiometry of PLD-grown CsPbBr3 films depending on composition and thermal treatment of the ablation target. The implications of the observed enrichment in the heavier element (Pb) and deficiency in the lighter element (Br) of the PLD-grown films are discussed in terms of optical response and with the perspective of providing operative guidelines and future PLD-deposition strategies of inorganic perovskites.

Electrospun polyvinyl-alcohol/gum arabic nanofibers: Biomimetic platform for in vitro cell growth and cancer nanomedicine delivery.

The design of powerful in vitro cell culture platforms to support precision medicine can contribute to predict therapeutic success of cancer patients. Electrospun nanofibers applied to cell culture can mimic extracellular matrix and improve in vitro cell behavior. Here, we describe biocompatible blended polyvinyl-alcohol (PVA)/gum arabic (GA) extracellular matrix (ECM)-like nanofibers for in vitro cell cultures capable of delivering nanocomposite for desired biomedical application. Therefore, PVA/GA ECM-like electrospun nanofibers were developed and characterized. Heat treatment was used to crosslink the nanofibers and biocompatibility was evaluated, which demonstrated the ability of developed platform to provide a cell culture-friendly environment. Previous work demonstrated that GA-gold nanoparticles (GA-AuNPs) in non-cytotoxic concentrations can reduce key metastatic cellular events such as invasion and colony formation of metastatic melanoma cells. Thus, crosslinked nanofibers were functionalized with GA-AuNPs and its cellular delivery was evaluated. GA-AuNPs were efficiently adsorbed onto the PVA/GA nanofibers surface and the system effectively delivered the nanocomposites to metastatic melanoma cells. In conclusion, the described biocompatible system could be prospected as a valuable in vitro tool for precision medicine.

An Insight into Chemistry and Structure of Colloidal 2D-WS2 Nanoflakes: Combined XPS and XRD Study.

The surface and structural characterization techniques of three atom-thick bi-dimensional 2D-WS2 colloidal nanocrystals cross the limit of bulk investigation, offering the possibility of simultaneous phase identification, structural-to-morphological evaluation, and surface chemical description. In the present study, we report a rational understanding based on X-ray photoelectron spectroscopy (XPS) and structural inspection of two kinds of dimensionally controllable 2D-WS2 colloidal nanoflakes (NFLs) generated with a surfactant assisted non-hydrolytic route. The qualitative and quantitative determination of 1T' and 2H phases based on W 4f XPS signal components, together with the presence of two kinds of sulfur ions, S22- and S2-, based on S 2p signal and related to the formation of WS2 and WOxSy in a mixed oxygen-sulfur environment, are carefully reported and discussed for both nanocrystals breeds. The XPS results are used as an input for detailed X-ray Diffraction (XRD) analysis allowing for a clear discrimination of NFLs crystal habit, and an estimation of the exact number of atomic monolayers composing the 2D-WS2 nanocrystalline samples.

Investigation on the Composition of Agarose-Collagen I Blended Hydrogels as Matrices for the Growth of Spheroids from Breast Cancer Cell Lines.

Three-dimensional (3D) cell culture systems mimic the structural complexity of the tissue microenvironment and are gaining increasing importance as they resemble the extracellular matrix (ECM)-cell and cell-cell physical interactions occurring in vivo. Several scaffold-based culture systems have been already proposed as valuable tools for large-scale production of spheroids, but they often suffer of poor reproducibility or high costs of production. In this work, we present a reliable 3D culture system based on collagen I-blended agarose hydrogels and show how the variation in the agarose percentage affects the physical and mechanical properties of the resulting hydrogel. The influence of the different physical and mechanical properties of the blended hydrogels on the growth, size, morphology, and cell motility of the spheroids obtained by culturing three different breast cancer cell lines (MCF-7, MDA-MB-361, and MDA-MB-231) was also evaluated. As proof of concept, the cisplatin penetration and its cytotoxic effect on the tumor spheroids as function of the hydrogel stiffness were also investigated. Noteworthily, the possibility to recover the spheroids from the hydrogels for further processing and other biological studies has been considered. This feature, in addition to the ease of preparation, the lack of cross-linking chemistry and the high reproducibility, makes this hydrogel a reliable biomimetic matrix for the growth of 3D cell structures.

Electrochromic evaluation of airbrushed water-dispersible W18O49nanorods obtained by microwave-assisted synthesis.

Motivated by the technological relevance of tungsten oxide nanostructures as valuable materials for energy saving technology, electrochemical and electrochromic characteristics of greener processed nanostructured W18O49-based electrodes are discussed in this work. For the purpose, microwave-assisted water-dispersible W18O49nanorods have been synthesized and processed into nanostructured electrodes. An airbrushing technique has been adopted as a cost-effective large-area scalable methodology to deposit the W18O49nanorods onto conductive glass. This approach preserves the morphological and crystallographic habit of native nanorods and allows highly homogeneous transparent coating where good electronic coupling between nanowires is ensured by a mild thermal treatment (250 °C, 30 min). Morphological and structural characteristics of active material were investigated from the synthesis to the nanocrystal deposition process by transmission and scanning electron microscopy, x-ray diffraction, atomic force microscopy and Raman spectroscopy. The as-obtained nanostructured film exhibited good reversible electrochemical features through several intercalation-deintercalation cycles. The electrochromic properties were evaluated on the basis of spectro-electrochemical measurements and showed significant optical contrast in the near-infrared region and high coloration efficiency at 550 nm.

Sonication-Assisted Production of Fosetyl-Al Nanocrystals: Investigation of Human Toxicity and In Vitro Antibacterial Efficacy against Xylella Fastidiosa.

Recently, there is a growing demand in sustainable phytopathogens control research. Nanotechnology provides several tools such as new pesticides formulations, antibacterial nanomaterials and smart delivery systems. Metal nano-oxides and different biopolymers have been exploited in order to develop nanopesticides which can offer a targeted solution minimizing side effects on environment and human health. This work proposed a nanotechnological approach to obtain a new formulation of systemic fungicide fosetyl-Al employing ultrasonication assisted production of water dispersible nanocrystals. Moreover, chitosan was applicated as a coating agent aiming a synergistic antimicrobial effect between biopolymer and fungicide. Fosetyl-Al nanocrystals have been characterized by morphological and physical-chemical analysis. Nanotoxicological investigation was carried out on human keratinocytes cells through cells viability test and ultrastructural analysis. In vitro planktonic growth, biofilm production and agar dilution assays have been conducted on two Xylella fastidiosa subspecies. Fosetyl-Al nanocrystals resulted very stable over time and less toxic respect to conventional formulation. Finally, chitosan-based fosetyl-Al nanocrystals showed an interesting antibacterial activity against Xylella fastidiosa subsp. pauca and Xylella fastidiosa subsp. fastidiosa.

In-plane Aligned Colloidal 2D WS2 Nanoflakes for Solution-Processable Thin Films with High Planar Conductivity.

Two-dimensional transition-metal dichalcolgenides (2D-TMDs) are among the most intriguing materials for next-generation electronic and optoelectronic devices. Albeit still at the embryonic stage, building thin films by manipulating and stacking preformed 2D nanosheets is now emerging as a practical and cost-effective bottom-up paradigm to obtain excellent electrical properties over large areas. Herein, we exploit the ultrathin morphology and outstanding solution stability of 2D WS2 colloidal nanocrystals to make thin films of TMDs assembled on a millimetre scale by a layer-by-layer deposition approach. We found that a room-temperature surface treatment with a superacid, performed with the precise scope of removing the native insulating surfactants, promotes in-plane assembly of the colloidal WS2 nanoflakes into stacks parallel to the substrate, along with healing of sulphur vacancies in the lattice that are detrimental to electrical conductivity. The as-obtained 2D WS2 thin films, characterized by a smooth and compact morphology, feature a high planar conductivity of up to 1 µS, comparable to the values reported for epitaxially grown WS2 monolayers, and enable photocurrent generation upon light irradiation over a wide range of visible to near-infrared frequencies.

Mechanistic insight into the formation of colloidal WS2 nanoflakes in hot alkylamine media.

Developing convenient and reliable synthetic methodologies for solution processable 2D layered ultrathin nanostructures with lateral size control is one of the major challenges for practical applications. In this study, a rational understanding a long-chain amphiphilic surfactant assisted non-hydrolytic synthesis that is able to generate dimension-controllable 2D-WS2 nanocrystal flakes in a single-step protocol is proposed. The evolution of the starting soft organic-inorganic lamellar template into ultrathin few-layer 2D-WS2 nanostructures with lateral size modulation over a range between 3 and 30 nm is monitored. The initial formation of WS2 nanoseeds occurs in a self-assembled sacrificial precursor source, acting as a template, where larger two-dimensional nanostructures can grow without undergoing significant thickness variation. Overall, the chemical nature and steric hindrance of the alkylamines are essential to modulate the reactivity of such WS2 nanoclusters, which correlate with the lateral size of the resulting nanoflakes.

Room-temperature processed films of colloidal carved rod-shaped nanocrystals of reduced tungsten oxide as interlayers for perovskite solar cells.

Thanks to their high stability, good optoelectronic and extraordinary electrochromic properties, tungsten oxides are among the most valuable yet underexploited materials for energy conversion applications. Herein, colloidal one-dimensional carved nanocrystals of reduced tungsten trioxide (WO3-x) are successfully integrated, for the first time, as a hole-transporting layer (HTL) into CH3NH3PbI3 perovskite solar cells with a planar inverted device architecture. Importantly, the use of such preformed nanocrystals guarantees the facile solution-cast-only deposition of a homogeneous WO3-x thin film at room temperature, allowing achievement of the highest power conversion efficiency ever reported for perovskite solar cells incorporating raw and un-doped tungsten oxide based HTL.

Polymeric Nano-Micelles as Novel Cargo-Carriers for LY2157299 Liver Cancer Cells Delivery.

LY2157299 (LY), which is very small molecule bringing high cancer diffusion, is a pathway antagonist against TGFß. LY dosage can be diluted by blood plasma, can be captured by immune system or it might be dissolved during digestion in gastrointestinal tract. The aim of our study is to optimize a "nano-elastic" carrier to avoid acidic pH of gastrointestinal tract, colon alkaline pH, and anti-immune recognition. Polygalacturonic acid (PgA) is not degradable in the gastrointestinal tract due to its insolubility at acidic pH. To avoid PgA solubility in the colon, we have designed its conjugation with Polyacrylic acid (PAA). PgA-PAA conjugation has enhanced their potential use for oral and injected dosage. Following these pre-requisites, novel polymeric nano-micelles derived from PgA-PAA conjugation and loading LY2157299 are developed and characterized. Efficacy, uptake and targeting against a hepatocellular carcinoma cell line (HLF) have also been demonstrated.

Hybrid polymeric-protein nano-carriers (HPPNC) for targeted delivery of TGFß inhibitors to hepatocellular carcinoma cells.

TGFß1 pathway antagonists have been considered promising therapies to attenuate TGFß downstream signals in cancer cells. Inhibiting peptides, as P-17 in this study, are bound to either TGFß1 or its receptors, blocking signal transduction. However, for efficient use of these TGFß1antagonist as target therapeutic tools, improvement in their delivery is required. Here, a plasmid carrying specific shDNA (SHT-DNA), small interfering RNA (siRNA), and the peptide (P-17) were loaded separately into folic acid (FA)-functionalized nano-carriers made of Bovine Serum Albumin (BSA). The two building blocks of the carrier, (BSA and FA) were used because of the high affinity of albumin for liver and for the overexpression of folate receptors on the membrane of hepatocellular carcinoma cells. The empty and the encapsulated carriers were thoroughly investigated to characterize their structure, to evaluate the colloidal stability and the surface functionalization. The entrapment of SHT-DNA, siRNA and P-17, respectively, was demonstrated by morphological and quantitative analysis. Finally, cellular studies were performed to assess the targeting efficiency of the hybrid carriers. These vectors were used because of the high affinity of albumin for liver and for the overexpression of folate receptors on the membrane hepatocellular carcinoma cells. The empty and the encapsulated carriers were thoroughly investigated to characterize their structure, to evaluate the colloidal stability and the surface functionalization. The entrapment of SHT-DNA, siRNA and P-17, respectively, was demonstrated by morphological and quantitative analysis. A novel fabrication of Hybrid Polymeric-Protein Nano-Carriers (HPPNC) for delivering TGF ß1 inhibitors to HCC cells has been developed. SHT-DNA, siRNA and P-17 have been successfully encapsulated. TGF ß1 inhibitors-loaded HPPNC were efficiently uptaken by HLF cells.

Biocompatible multilayer capsules engineered with a graphene oxide derivative: synthesis, characterization and cellular uptake.

Graphene-based capsules have strong potential for a number of applications, including drug/gene delivery, tissue engineering, sensors, catalysis and reactors. The ability to integrate graphene into carrier systems with three-dimensional (3D) geometry may open new perspectives both for fundamental tests of graphene mechanics and for novel (bio)technological applications. However, the assembly of 3D complexes from graphene or its derivatives is challenging because of its poor stability under biological conditions. In this work, we attempted to integrate a layer of graphene oxide derivative into the shell of biodegradable capsules by exploiting a facile layer-by-layer (LbL) protocol. As a first step we optimized the LbL protocol to obtain colloidal suspensions of isolated capsules embedding the graphene oxide derivative. As a following step, we investigated in detail the morphological properties of the hybrid capsules, and how the graphene oxide derivative layer influences the porosity and the robustness of the multilayer composite shells. Finally, we verified the uptake of the capsules modified with the GO derivative by two cell lines and studied their intracellular localization and biocompatibility. As compared to pristine capsules, the graphene-modified capsules possess reduced porosity, reduced shell thickness and a higher stability against osmotic pressure. They show remarkable biocompatibility towards the tested cells and long-term colloidal stability and dispersion. By combining the excellent mechanical properties of a graphene oxide derivative with the high versatility of the LbL method, robust and flexible biocompatible polymeric capsules with novel characteristics have been fabricated.

Catalytic self-propulsion of supramolecular capsules powered by polyoxometalate cargos.

Multicompartment, spherical microcontainers were engineered through a layer-by-layer polyelectrolyte deposition around a fluorescent core while integrating a ruthenium polyoxometalate (Ru4POM), as molecular motor, vis-à-vis its oxygenic, propeller effect, fuelled upon H2O2 decomposition. The resulting chemomechanical system, with average speeds of up to 25 µm s(-1), is amenable for integration into a microfluidic set-up for mixing and displacement of liquids, whereby the propulsion force and the resulting velocity regime can be modulated upon H2O2-controlled addition.

Metallic-like stoichiometric copper sulfide nanocrystals: phase- and shape-selective synthesis, near-infrared surface plasmon resonance properties, and their modeling.

In the realm of semiconductor nanomaterials, a crystal lattice heavily doped with cation/anion vacancies or ionized atomic impurities is considered to be a general prerequisite to accommodating excess free carriers that can support localized surface plasmon resonance (LSPR). Here, we demonstrate a surfactant-assisted nonaqueous route to anisotropic copper sulfide nanocrystals, selectively trapped in the covellite phase, which can exhibit intense, size-tunable LSPR at near-infrared wavelengths despite their stoichiometric, undoped structure. Experimental extinction spectra are satisfactorily reproduced by theoretical calculations performed by the discrete dipole approximation method within the framework of the Drude-Sommerfeld model. The LSPR response of the nanocrystals and its geometry dependence are interpreted as arising from the inherent metallic-like character of covellite, allowed by a significant density of lattice-constitutional valence-band free holes. As a consequence of the unique electronic properties of the nanocrystals and of their monodispersity, coherent excitation of symmetric radial breathing modes is observed for the first time in transient absorption experiments at LSPR wavelengths.