RESUMO
Micro- and nanoplastics have emerged as critical pollutants in various ecosystems, posing potential environmental and human health risks. Washing of polyester textiles has been identified as one of the sources of nanoplastics. However, other stages of the textile life cycle may also release nanoparticles. This study aimed to examine nanoparticle release during UV degradation of polyester textiles under controlled and real-world conditions. Fleece polyester textiles were weathered under simulated sunlight for up to two months, either in air or submerged in water. We conducted bi-weekly SEM image analyses and quantified released nanoparticles using nanoparticle tracking analysis (NTA). At week 0, the fiber surface appeared smooth after prewashing. In the air group, nanoparticles appeared on the fiber surface after UV-exposure. In the group of textiles submerged in water, the surfaces developed more pits over time. The cumulative nanoparticle emission from the weathered textiles ranged from 1.4 × 1011 to 4.0 × 1011 particles per gram of fabric in the air group and from 1.6 × 1011 to 4.4 × 1011 particles per gram of fabric in the water group over two months. The predominant particle size fell into the 100 to 200 nm range. The estimated mass of the released nanoparticles was 0.06-0.26 g per gram of fabric, which is lower than the amount released during the washing of new textiles. Additionally, Scanning Transmission X-ray Microscopy (STXM) images indicated that the weathered nanoparticles underwent oxidation. Overall, the research offers valuable insights into nanoparticle formation and release from polyester textiles during UV degradation.
RESUMO
Macroplastic fate and transport in the freshwater environment are of great concern due to the potentially harmful effects of macroplastic on plants, animals, and humans. Here, we present a modeling approach to simulate macroplastic fate and transport at the country scale based on an existing plastic release model. The fate model was parametrized through available monitoring data and results from field experiments and applied to Swiss rivers and lakes. We found that almost all (98%) macroplastic emissions into freshwater remain within Switzerland. After exploring the influences of weirs, retention in rivers, and retention in lakes through a sensitivity analysis, we found a high retention variability across different catchments and within rivers. In all 22 analyzed scenarios for continuous retention along each river bank (i.e., beaching), we found that at least 70% of input emissions into the water bodies would be retained long-term in the catchments (about 200 g per river km and year). Across all catchments, we found a dominance of "continuous retention" through beaching along the entire river length compared with "point retention" at weirs or lakes. Thus, by modeling macroplastic fate and transport on a country level for the first time, we were able to confirm the concept of "rivers as plastic reservoirs" through modeling.
RESUMO
Secondary microplastics are a product of the fragmentation of plastic debris. Despite concerns regarding the omnipresence of microplastics in the environment, knowledge about the mechanics of their actual formation is still limited. Fragmentation is usually linked to weathering, which alters the properties of the plastic and allows fragmentation to occur. Therefore, in this study, polyethylene terephthalate (PET) samples were exposed to artificial UV light or a combination of UV light and water for a total of three months to simulate natural weathering. The samples included three forms of PET with different production histories: pellets, yarns, and films. The surface alterations to the samples during weathering were characterized using scanning electron microscopy and Raman spectroscopy. Results indicated that the three different types of PET developed markedly different surface defects and also exhibited signs of weathering within different time frames. Differences were also found between samples exposed only to UV and those exposed to UV and submerged in water. In water, the first surface changes were spotted within 30 days of initial submersion and later developed into an organized crack network. Upon the introduction of mild mechanical forces, pieces of the weathered surface started to delaminate. The fragments from films had an elongated shape with a median size of 16.1 × 2.1 × 1.8 µm, resembling a fibre. If the weathered surface of a film were to detach completely, it could create 1.4-7.9 million microplastic fragments/cm2. For pellets, this number would range between 0.4 and 2.2 million microplastics/cm2. In addition to particle formation by surface delamination, particles also emerged on the weathered surfaces of all studied samples, presenting another possible source of micro-sized particles during weathering. Overall, the results of this work show that the weathering of plastics and the formation of microplastics are heavily influenced not only by the weathering mechanism but also by the type and production history of the polymers.
Assuntos
Microplásticos , Poluentes Químicos da Água , Microplásticos/química , Plásticos/química , Polietilenotereftalatos , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Água , Polietileno/químicaRESUMO
There have been major advances in the science to predict the likely environmental concentrations of nanomaterials, which is a key component of exposure and subsequent risk assessment. Considerable progress has been since the first Material Flow Analyses (MFAs) in 2008, which were based on very limited information, to more refined current tools that take into account engineered nanoparticle (ENP) size distribution, form, dynamic release, and better-informed release factors. These MFAs provide input for all environmental fate models (EFMs), that generate estimates of particle flows and concentrations in various environmental compartments. While MFA models provide valuable information on the magnitude of ENP release, they do not account for fate processes, such as homo- and heteroaggregation, transformations, dissolution, or corona formation. EFMs account for these processes in differing degrees. EFMs can be divided into multimedia compartment models (e.g., atmosphere, waterbodies and their sediments, soils in various landuses), of which there are currently a handful with varying degrees of complexity and process representation, and spatially-resolved watershed models which focus on the water and sediment compartments. Multimedia models have particular applications for considering predicted environmental concentrations (PECs) in particular regions, or for developing generic "fate factors" (i.e., overall persistence in a given compartment) for life-cycle assessment. Watershed models can track transport and eventual fate of emissions into a flowing river, from multiple sources along the waterway course, providing spatially and temporally resolved PECs. Both types of EFMs can be run with either continuous sources of emissions and environmental conditions, or with dynamic emissions (e.g., temporally varying for example as a new nanomaterial is introduced to the market, or with seasonal applications), to better understand the situations that may lead to peak PECs that are more likely to result in exceedance of a toxicological threshold. In addition, bioaccumulation models have been developed to predict the internal concentrations that may accumulate in exposed organisms, based on the PECs from EFMs. The main challenge for MFA and EFMs is a full validation against observed data. To date there have been no field studies that can provide the kind of dataset(s) needed for a true validation of the PECs. While EFMs have been evaluated against a few observations in a small number of locations, with results that indicate they are in the right order of magnitude, there is a great need for field data. Another major challenge is the input data for the MFAs, which depend on market data to estimate the production of ENPs. The current information has major gaps and large uncertainties. There is also a lack of robust analytical techniques for quantifying ENP properties in complex matrices; machine learning may be able to fill this gap. Nevertheless, there has been major progress in the tools for generating PECs. With the emergence of nano- and microplastics as a leading environmental concern, some EFMs have been adapted to these materials. However, caution is needed, since most nano- and microplastics are not engineered, therefore their characteristics are difficult to generalize, and there are new fate and transport processes to consider.
Assuntos
Microplásticos , Nanoestruturas , Plásticos , Modelos Teóricos , Medição de RiscoRESUMO
With the introduction of the European Commission's "Safe and Sustainable-by-Design" (SSbD) framework, the interest in understanding the implications of safety and sustainability assessments of chemicals, materials, and processes at early-innovation stages has skyrocketed. Our study focuses on the "Safe-by-Design" (SbD) approach from the nanomaterials sector, which predates the SSbD framework. In this assessment, SbD studies have been compiled and categorized into reviews, case studies, and frameworks. Reviews of SbD tools have been further classified as quantitative, qualitative, or toolboxes and repositories. We assessed the SbD case studies and classified them into three categories: safe(r)-by-modeling, safe(r)-by-selection, or safe(r)-by-redesign. This classification enabled us to understand past SbD work and subsequently use it to define future SSbD work so as to avoid confusion and possibilities of "SSbD-washing" (similar to greenwashing). Finally, the preexisting SbD frameworks have been studied and contextualized against the SSbD framework. Several key recommendations for SSbD based on our analysis can be made. Knowledge gained from existing approaches such as SbD, green and sustainable chemistry, and benign-by-design approaches needs to be preserved and effectively transferred to SSbD. Better incorporation of chemical and material functionality into the SSbD framework is required. The concept of lifecycle thinking and the stage-gate innovation model need to be reconciled for SSbD. The development of high-throughput screening models is critical for the operationalization of SSbD. We conclude that the rapid pace of both SbD and SSbD development necessitates a regular mapping of the newly published literature that is relevant to this field.
Assuntos
Nanoestruturas , Desenvolvimento Sustentável , Previsões , Projetos de PesquisaRESUMO
The environmental hazards of microplastics have raised concerns about their potential ecological risks. However, our understanding of the true risks may be limited because most laboratory studies used pristine microplastics. Here, we analyzed the available literature about ecotoxicological effects of microplastics, including weathered microplastics in particular, on freshwater biota and performed probabilistic species sensitivity distributions. The predicted no-effect concentrations for pristine microplastics were lower than those for weathered microplastics, both in mass concentration (6.1 and 4.8 × 102 µg/L) and number concentration (2.6 × 104 and 2.0 × 106 part/m3). In addition, the toxicological studies on microplastics contains often inconsistent and inconclusive information due to the complexity of the microplastics and the employed exposure conditions. The available data for Daphnia magna and Danio rerio was analyzed in detail to understand the effects of microplastic size, shape and polymer type on their ecotoxicity. Microplastic size was the biggest driving factor, followed by shape and polymer type. There was a tendency for increasing toxicity with smaller size, however, a high variability of effect data was observed for small microplastics. This study provided further insights into the effect thresholds for ecological risk assessment of microplastics and the effects of microplastic characteristics on toxicity.
Assuntos
Microplásticos , Poluentes Químicos da Água , Animais , Microplásticos/toxicidade , Plásticos/toxicidade , Plásticos/análise , Poluentes Químicos da Água/análise , Daphnia , Peixe-Zebra , Água Doce , Monitoramento AmbientalRESUMO
Synthetic textiles are considered a prime source of microplastics fibers which are a prevalent shape of microplastic pollution. Whilst the release mechanisms and formation of such microplastic fibers have been so far mainly studied in connection with laundry washing, there are some studies emerging that describe also other release pathways for microplastic fibers such as abrasion during wearing. The aim of this study was to consider weathering as another process contributing to the formation of microplastic fibers and their presence in the environment. Four types of polyester fabrics were selected and exposed to artificial weathering by UV-light for two months. The fabrics were extracted every 15 days to quantify and characterize the formed microplastics. Microplastic fibers with the diameter matching the size of the fibers in the textiles were observed. However, additional microplastic fibers of different shapes were also formed. These included partially broken fibers, thin fibers with a diameter below the size of the fiber in the fabrics, fibers flattened into a ribbon, and non-fibrous microplastics. The released microplastics evinced physical alterations on their surface in the form of pits and cracks. The released microplastics exhibited a steep increase in number with progressing weathering; from hundreds of fibers per gram of textile from unaged fabrics, to hundred thousands fibers (150,000-450,000 MPF/g) after 2 months of weathering. Additional 10,000-52,000 unfibrous microplastics/g were released from the weathered fabrics. While plain fabrics showed higher releases than interlock and fleece, further research is needed to evaluate the importance of the textile architecture on the weathering process in comparison with the production history of the fabrics. Based on a comparison with washing studies with the same textiles, we can estimate that the potential of weathered fabrics to be a source of microplastic fibers can be 20-40 times larger than washing only.
Assuntos
Poliésteres , Poluentes Químicos da Água , Plásticos , Microplásticos , Têxteis , Tempo (Meteorologia) , Poluentes Químicos da Água/análiseRESUMO
Microplastic fibers (MPFs) released from synthetic textiles have been found to be a major source of microplastic in the environment. There is increasing evidence available that MPFs released during washing were likely formed during the manufacturing stage. However, real-life use of textiles is often associated with textile-on-textile abrasion, and the first evidence is available that MPFs and finer microplastic fiber fragments (fibrils) are formed during abrasion. In this study, we characterized the formation of MPFs and fibrils from a representative set of 12 polyester textiles after abrasion tests conducted with a Martindale tester. We also investigated the influence of rub intensity and the extractability of MPFs and fibrils from the abraded fabrics. For all textiles, the MPFs extracted after abrasion showed the same diameter as the fibers in non-abraded textiles (10-20 µm), while the extracted fibrils were much thinner (3-5 µm). The variability in the structure of the different polyester textiles led to a broad range of MPF and fibrils extracted during the first wash after 5000 rubs. One gram of textile released between 4900 and 640,000 MPFs and between 0 and 350,000 fibrils with an average fibril/MPF ratio of 0.8. The total number of MPFs and fibrils formed during abrasion was positively correlated with the increase in the number of rubs up to 10,000 times. Visible pilling on the textile surface was an important indicator for the formation of MPFs and fibrils. Our study revealed that textile abrasion is a critical, realistic, and overlooked mechanism for the formation of MPFs and fibrils, as abraded textiles (after 5000 times rubs) can release more than ten times the number of MPFs and fibrils compared to washing only.
Assuntos
Plásticos , Poliésteres , Poliésteres/química , Microplásticos , TêxteisRESUMO
As industrial demand for graphene-based materials (GBMs) grows, more attention falls on potential environmental risks. The present article describes a first assessment of the environmental releases of GBMs using dynamic probabilistic material flow analysis. The model considered all current or expected uses of GBMs from 2004 to 2030, during which time there have already been significant changes in how the graphene mass produced is distributed to different product categories. Although the volume of GBM production is expected to grow exponentially in the coming years, outflow from the consumption of products containing GBMs shows only a slightly positive trend due to their long lifetimes and the large in-use stock of some applications (e.g., GBM composites used in wind turbine blades). From consumption and end-of-life phase GBM mass flows in 2030, estimates suggest that more than 50% will be incinerated and oxidized in waste plants, 16% will be landfilled, 12% will be exported out of Europe, and 1.4% of the annual production will flow to the environment. Predicted release concentrations for 2030 are 1.4 ng/L in surface water and 20 µg/kg in sludge-treated soil. This study's results could be used for prospective environmental risk assessments and as input for environmental fate models.
Assuntos
Grafite , Esgotos , Europa (Continente) , Estudos Prospectivos , Solo , ÁguaRESUMO
Since the start of the current COVID-19 pandemic, for the first time a significant fraction of the world's population cover their respiratory system for an extended period with mostly medical facemasks and textile masks. This new situation raises questions about the extent of mask related debris (fibers and particles) being released and inhaled and possible adverse effects on human health. This study aimed to quantify the debris release from a textile-based facemask in comparison to a surgical mask and a reference cotton textile using both liquid and air extraction. Under liquid extractions, cotton-based textiles released up to 29'452 ± 1'996 fibers g-1 textile while synthetic textiles released up to 1'030 ± 115 fibers g-1 textile. However, when the masks were subjected to air-based extraction scenarios, only a fraction (0.1-1.1%) of this fiber amount was released. Several metals including copper (up to 40.8 ± 0.9 µg g-1) and iron (up to 7.0 ± 0.3 µg g-1) were detected in acid dissolved textiles. Additionally the acute in vitro toxicity of size-fractionated liquid extracts (below and above 0.4 µm) were assessed on human alveolar basal epithelial cells. The current study shows no acute cytotoxicity response for all the analyzed facemasks.
Assuntos
COVID-19 , Humanos , Pandemias , TêxteisRESUMO
Grass-based suckling beef-derived foods occasionally exceed regulatory levels for polychlorinated biphenyls (PCBs) and dibenzo-p-dioxins/dibenzofurans (PCDD/Fs). Ensuring chemical safety requires understanding the cow-calf transgenerational PCB and PCDD/F fate. The current focus was on dairy cows, omitting transgenerational fate and suckling beef-related physiological effects. This study aimed to investigate PCB and PCDD/F absorption, distribution, metabolism, and excretion within 12 Simmental cows (six primiparous/six multiparous) and 12 calves fed with the milk of their respective mothers for 109 days prepartum until 288 days in milk (DIM), i.e., slaughter time. Eight cows were exposed to a grass silage-soil mixture. Four were decontaminated after DIM164 by receiving uncontaminated grass silage, which four control cows received. An input-output balance during gestation and lactation was computed from PCB, PCDD/F, and lipid inputs (solid feed/milk intakes), outputs (fecal/milk excretions), and body storage (initial/final burdens). At slaughter, PCB and PCDD/F tissue distribution, and lipid allometry were linked. Apparent PCB and PCDD/F absorption rates and metabolized fractions decreased with increasing chlorination. In calves, PCB absorption showed no effect due to chlorination (steady range: 71-87%). High-chlorinated PCB and PCDD/F absorption rates decreased when provided through soil. Cows excreted PCBs and PCDD/Fs via feces (50% relative to input) and milk (9%) and accumulated only 5% in their body, whereas calves accumulated the largest fraction of the total input in their bodies (44%). Cow physiology affected accumulation and excretion, as in primiparous cows, net body burden and milk assimilation efficiencies were higher and lower, respectively, than in multiparous. Liver-specific enrichment was observed in cows and calves (7.0- and 3.2-fold iPCB and dlPCB + PCDD/F TEQ, compared to empty body-based lipid concentrations), whereas iPCBs were also enriched in kidneys (3.1-fold) and muscles (1.5-fold). Consequently, adipose concentrations did not perfectly represent most edible beef tissues. This highlights the essence of integrating the interplay between physicochemical pollutant properties and animal physiology in transgenerational transfer assessments of PCBs and PCDD/Fs.
Assuntos
Benzofuranos , Dioxinas , Poluentes Ambientais , Bifenilos Policlorados , Dibenzodioxinas Policloradas , Animais , Benzofuranos/análise , Bovinos , Dibenzofuranos , Dibenzofuranos Policlorados , Dioxinas/análise , Feminino , Contaminação de Alimentos/análise , Lipídeos , Poaceae , Bifenilos Policlorados/análise , Dibenzodioxinas Policloradas/análise , Silagem , Solo , Distribuição TecidualRESUMO
Today's scarcity of animal toxicological data for nanomaterials could be lifted by substituting in vivo data with in vitro data to calculate nanomaterials' effect factors (EF) for Life Cycle Assessment (LCA). Here, we present a step-by-step procedure to calculate in vitro-to-in vivo extrapolation factors to estimate human Benchmark Doses and subsequently in vitro-based EFs for several inhaled nonsoluble nanomaterials. Based on mouse data, the in vitro-based EF of TiO2 is between 2.76 · 10-4 and 1.10 · 10-3 cases/(m2/g·kg intake), depending on the aerodynamic size of the particle, which is in good agreement with in vivo-based EFs (1.51 · 10-4-5.6 · 10-2 cases/(m2/g·kg intake)). The EF for amorphous silica is in a similar range as for TiO2, but the result is less robust due to only few in vivo data available. The results based on rat data are very different, confirming the importance of selecting animal species representative of human responses. The discrepancy between in vivo and in vitro animal data in terms of availability and quality limits the coverage of further nanomaterials. Systematic testing on human and animal cells is needed to reduce the variability in toxicological response determined by the differences in experimental conditions, thus helping improve the predictivity of in vitro-to-in vivo extrapolation factors.
Assuntos
Nanoestruturas , Dióxido de Silício , Animais , Humanos , Estágios do Ciclo de Vida , Camundongos , Tamanho da Partícula , Ratos , Solubilidade , Titânio/toxicidadeRESUMO
Evaluating the potential risks of nanomaterials on human health is fundamental to assure their safety. To do so, Human Health Risk Assessment (HHRA) relies mostly on animal studies to provide information about nanomaterials toxicity. The scarcity of such data, due to the shift of the nanotoxicology field away from a phenomenological, animal-based approach and towards a mechanistic understanding based on in vitro studies, represents a challenge for HHRA. Implementing in vitro data in the HHRA methodology requires an extrapolation strategy; combining in vitro dosimetry and lung dosimetry can be an option to estimate the toxic effects on lung cells caused by inhaled nanomaterials. Since the two dosimetry models have rarely been used together, we developed a combined dosimetry model (CoDo) that estimates the air concentrations corresponding to the in vitro doses, extrapolating in this way in vitro doses to human doses. Applying the model to a data set of in vitro and in vivo toxicity data about titanium dioxide, we demonstrated CoDo's multiple applications. First, we confirmed that most in vitro doses are much higher than realistic human exposures, considering the Swiss Occupational Exposure Limit as benchmark. The comparison of the Benchmark Doses (BMD) extrapolated from in vitro and in vivo data, using the surface area dose metric, showed that despite both types of data had a quite wide range, animal data were overall more precise. The high variability of the results may be due both to the dis-homogeneity of the original data (different cell lines, particle properties, etc.) and to the high level of uncertainty in the extrapolation procedure caused by both model assumptions and experimental conditions. Moreover, while the surface area BMDs from studies on rodents and rodent cells were comparable, human co-cultures showed less susceptibility and had higher BMDs regardless of the titanium dioxide type. Last, a Support Vector Machine classification model built on the in vitro data set was able to predict the BMD-derived human exposure level range for viability effects based on the particle properties and experimental conditions with an accuracy of 85%, while for cytokine release in vitro and neutrophil influx in vivo the model had a lower performance.
Assuntos
Dosimetria in Vivo , Exposição Ocupacional , Animais , Humanos , Pulmão , Exposição Ocupacional/efeitos adversos , Titânio/toxicidadeRESUMO
Tire wear particle (TWP) emissions are gaining more attention since they are considered to contribute a major share to the overall microplastic emissions and are suspected to be harmful to flora, fauna and humans. Hence, recent studies derived country-based TWP emissions to better understand the significance of the problem using either tire emission factors (EF) or a material flow analysis (MFA) of tires. However, all 14 country-based TWP emission studies found and published since the year 2000 base their calculation on other studies rather than own measurements. Therefore, we started to search for the actual TWP measurements which the 14 studies would rely on. As a result, we found a network of 63 studies which were used to derive TWP emissions in different countries and regions. Only in few cases (12%) TWP emission studies reference directly to a measurement study to derive TWP emissions, but mostly (63%) they rely on reviews or summarizing studies. Additionally, we could not obtain 25 studies in the analysed network. In total we found nine studies which actually measured TWP emissions. Out of these four studies originate from the 1970s, one analysed only light vehicles and one only considered buses. Thus, only three non peer-reviewed studies were considered to show trustful results which were cited a maximum of three times in the network. The obtained 14 country-based studies suggest TWP emissions of about 1.3 kg capita-1 year-1 for the EF approach and 2.0 kg capita-1 year-1 for the MFA approach (overall range: 0.9-2.5 kg capita-1 year-1). Consequently, we call for an urgent need to minimize uncertainties of TWP emission estimates to better understand the contribution of TWP to the overall microplastic pollution of the environment. A better understanding about quantities could also help to better address the risk of environmental pollution by TWP.
Assuntos
Poluentes Atmosféricos , Microplásticos , Monitoramento Ambiental , Humanos , Veículos Automotores , Plásticos , Emissões de Veículos/análiseRESUMO
Polychlorinated biphenyls (PCBs) and dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) are bioaccumulative pollutants that endanger bovine food safety. Bioaccumulation depends, among others, on the physiological dynamics of the cow's reproductive cycle. However, recent studies have focused only on near steady-state situations. Thus, the effects of animal physiology on PCB + PCDD/F transfer from grass silage and soil to cows' blood, adipose tissue, and milk and subsequently to suckling calves during gestation and lactation were investigated. In the exposed group, nine cows ate a grass silage/contaminated soil mixture (6.6 ± 0.8 µg iPCBs and 2.6 ± 0.4 ng dlPCB + PCDD/F TEQ kgDM-1) for 109 days prepartum until 288 days in milk (DIM). Four of these cows underwent decontamination after DIM164, receiving the same clean grass silage as the four control cows during the experiment. Calves were fed the milk of their respective mothers. In the exposed group, transgenerational bioaccumulation occurred until DIM164, with calf blood and adipose tissue PCB + PCDD/F concentrations reaching levels twice as high as those in their respective mothers. Transfer rates from oral intake to milk ranged from 0.1 up to 42%, depending on pollutant congener, dietary treatment, and reproductive parity of the cow. Congener and parity also influenced the decontamination half-lives of milk. In decontaminated calves, declines in adipose tissue PCB + PCDD/F concentrations coincided with increases in body fat mass. Therefore, it is essential to know the physiological characteristics of cattle, exposure dose and duration, and physicochemical compound properties to perform reliable transfer assessments.
Assuntos
Benzofuranos , Poluentes Ambientais , Bifenilos Policlorados , Dibenzodioxinas Policloradas , Animais , Benzofuranos/análise , Bovinos , Descontaminação , Dibenzofuranos , Dibenzofuranos Policlorados , Poluentes Ambientais/análise , Feminino , Cinética , Poaceae , Bifenilos Policlorados/análise , Dibenzodioxinas Policloradas/análise , Gravidez , Silagem , SoloRESUMO
Understanding the bioaccumulation of engineered nanomaterials (ENMs) is essential for making regulatory decisions on potential environmental risks. Research in the field of ENM bioaccumulation has increased in recent years, but the compilation and statistical analysis of the available experimental data have not been updated. We therefore performed a meta-analysis of the existing literature on the bioaccumulation of eight types of nondissolvable ENMs (titanium dioxide [TiO2 ], aluminum oxide [Al2 O3 ], gold [Au], fullerene [C60 ], carbon nanotubes, iron oxide [FeOx ], graphene, and polystyrene) in nonmammalian freshwater aquatic organisms across three trophic levels including phytoplankton, zooplankton, and fish. Three typical endpoints were used to assess the bioaccumulation potential: the bioconcentration factor (BCF), the bioaccumulation factor (BAF), and the biomagnification factor (BMF). Our results suggest that zooplankton has greater mean logarithmic BCF and BAF values than phytoplankton (3.31 vs. 1.42) and fish (2.04). The ENMs are biomagnified in zooplankton, with a mean BMF of 17.4, whereas trophic transfer from primary consumers (zooplankton) to secondary consumers (fish) was not observed (mean BMF of 0.13). No clear dependency was identified between the physicochemical characteristics of ENMs (e.g., primary particle size, zeta potential, or shape) and bioaccumulation, except for coated versus uncoated particles accumulated in phytoplankton. Carbonaceous ENMs were found to be more bioaccumulated than the other ENMs we considered, except for TiO2 . A meta-analysis of bioaccumulation data can (1) deepen the understanding of bioconcentration, bioaccumulation, and biomagnification of ENMs, (2) be used to support grouping strategies as a basis for a safer-by-design approach for ENMs, (3) be integrated into comprehensive hazard and risk assessments, (4) promote the standardization of testing guidelines, and (5) enhance future kinetic bioaccumulation modeling. Environ Toxicol Chem 2022;41:1202-1214. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Assuntos
Nanoestruturas , Nanotubos de Carbono , Poluentes Químicos da Água , Animais , Organismos Aquáticos , Bioacumulação , Peixes , Água Doce/química , Nanoestruturas/química , Fitoplâncton , Poluentes Químicos da Água/análise , ZooplânctonRESUMO
Fragrance encapsulates (FEs) are designed to deliver fragrance components, notably in laundry care products. They are made of thermoset polymeric shells surrounding the fragrance content. These materials enter the environment mainly during laundry washing, but little is known about their distribution in and impact on the environment. The aim of the present study was to estimate the environmental concentrations of FE shells in freshwater, sediment, and soil compartments for 34 selected countries and to compare them with ecotoxicological effects. Probabilistic material flow analysis was used to estimate worst-case predicted environmental concentrations (PECs). The lowest freshwater PEC was predicted for Finland (0.00011 µg/L) and the highest for Belgium (0.13 µg/L). Accumulation of FE shells between 2010 and 2019 was considered for sediments and sludge-treated soils. The PECs in sediments ranged from 3.0 µg/kg (Finland) to 3400 µg/kg (Belgium). For sludge-treated soil, the concentration was estimated to be between 0 (Malta and Switzerland) and 3600 µg/kg (Vietnam). Ecotoxicological tests showed no effects for FE shells at any tested concentration (up to 2700 µg/L freshwater, 5400 µg/kg sediment, and 9100 µg/kg soil), thus not allowing derivation of a predicted-no-effect concentration (PNEC). Therefore, to characterize the environmental risks, the PEC values were compared with highest-observed-no-effect concentrations (HONECs) derived from ecotoxicological tests. The PEC/HONEC ratios were 9.3 × 10-6 , 0.13, and 0.04 for surface waters, sediments, and sludge-treated soils, respectively, which are much below 1, suggesting no environmental risk. Because the PEC values constitute an upper boundary (no fate considered) and the HONEC values represent a lower boundary (actual PNEC values based on NOECs will be higher), the current risk estimation can be considered a precautionary worst-case assessment. Environ Toxicol Chem 2022;41:905-916. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.