Cementing technique for total knee arthroplasty in cadavers using a pastry bone cement.

BACKGROUND: In cemented primary total knee arthroplasty (TKA), aseptic loosening remains a major cause for failure. Cementing techniques and characteristics of a chosen cement play a key role for good fixation and implant survival. A pastry bone cement was developed to facilitate the cement preparation and to rule out most of preparation-associated application errors. The pastry bone cement was compared to a conventional polymethyl methacrylate cement in a TKA setting. METHODS: Standardized implantations of total knee endoprostheses were performed in bilateral knee cadavers to investigate handling properties, variables of cement application, working time, and temperature development. Mechanical aspects and cementation quality were assessed by pull-out trials and microscopic interface analysis. RESULTS: Both cements expressed similar characteristics during preparation and application, only the curing time of the pastry cement was about 3 min longer and the temperature peak was lower. Fractures of the conventional cement specimens differed from the pastry cement specimens in the tibial part, while no differences were found in the femoral part. Penetration depth of the pastry cement was similar (tibia) or deeper (femur) compared to the conventional cement. CONCLUSIONS: The pastry cement facilitates the feasibility of cemented TKA. The pre-clinical tests indicate that the pastry bone cement fulfills the requirements for bone cement in the field of knee arthroplasty. A clinical trial is needed to further investigate the approach and ensure patient safety.

The influence of biomechanical stability on bone healing and fracture-related infection: the legacy of Stephan Perren.

Bone healing is a complicated process of tissue regeneration that is influenced by multiple biological and biomechanical processes. In a minority of cases, these physiological processes are complicated by issues such as nonunion and/or fracture-related infection (FRI). Based on a select few in vivo experimental animal studies, construct stability is considered an important factor influencing both prevention and treatment of FRI. Stephan Perren played a pivotal role in the evolution of our current understanding of the critical relationship between biomechanics, fracture healing and infection. Furthermore, his concept of strain theory and the process of fracture healing is familiar to several generations of surgeons and has influenced implant development and design for the past 50 years. In this review we describe the role of biomechanical stability on fracture healing, and provide a detailed analysis of the preclinical studies addressing this in the context of FRI. Furthermore, we demonstrate how Perren's concepts of stability are still applied to current surgical techniques to aid in the prevention and treatment of FRI. Finally, we highlight the key knowledge gaps in the underlying basic research literature that need to be addressed as we continue to optimize patient care.

Orthoplastics in Periprosthetic Joint Infection of the Knee: Treatment Concept for Composite Soft-tissue Defect with Extensor Apparatus Deficiency.

Introduction: Reconstruction of composite soft-tissue defects with extensor apparatus deficiency in patients with periprosthetic joint infection (PJI) of the knee is challenging. We present a single-centre multidisciplinary orthoplastic treatment concept based on a retrospective outcome analysis over 20 years. Methods and Results: One-hundred sixty patients had PJI after total knee arthroplasty. Plastic surgical reconstruction of a concomitant perigenicular soft-tissue defect was indicated in 47 patients. Of these, six presented with extensor apparatus deficiency. One patient underwent primary arthrodesis and five patients underwent reconstruction of the extensor apparatus. The principle to reconstruct missing tissue 'like with like' was thereby favoured: Two patients with a wide soft-tissue defect received a free anterolateral thigh flap with fascia lata; one patient with a smaller soft-tissue defect received a free sensate, extended lateral arm flap with triceps tendon; and two patients who did not qualify for free flap surgery received a pedicled medial sural artery perforator gastrocnemius flap. Despite good functional results 1 year later, long-term follow-up revealed that two patients had to undergo arthrodesis because of recurrent infection and one patient was lost to follow-up. Conclusion: These results show that PJI of the knee and extensor apparatus deficiency is a dreaded combination with a poor long-term outcome. Standardization of surgical techniques for a defined PJI problem and consensus on study variables may facilitate interinstitutional comparisons of outcome data, and hence, improvement of treatment concepts.

Clostridial Infection After Open Fractures of the Lower Extremity - Report of Two Cases and Discussion of Pathomechanism and Treatment.

BACKGROUND: Management of post-traumatic open fractures resulting from severe injuries of the lower extremity continues to challenge orthopedic and reconstructive surgeons. Moreover, post-traumatic osteoarticular infections due to Clostridium species are rare, with few reports in the literature. We describe possible pathomechanisms and propose treatment options for cases of delayed diagnosis of osteoarticular infections with Clostridium spp. CASE REPORTS: Two patients sustained severe osteoarticular infection due to Clostridium spp. after open epi- and metaphyseal fractures of the lower extremity. In combination with radical debridement, ankle arthrodesis and long-term antibiotic treatment, satisfactory results were achieved after a follow-up of 18 months and 24 years. CONCLUSION: Clostridium species are difficult to identify, treatment is usually delayed and most patients have unfavourable outcomes.

Long-term results of revision total hip arthroplasty with a cemented femoral component.

INTRODUCTION: In revision total hip arthroplasty (THA), the cancellous bone is normally completely removed out of the femoral canal during stem extraction. This situation is comparable to primary THA following the shape-closed concept, with some authors advocating to remove the metaphyseal cancellous bone to enhance press-fit stability ("French paradox"). The aim of this study was to investigate the long-term outcome, regarding survival and radiological results, of a cemented straight stem when used for revision THA and to compare these results to the results of the same stem in primary THA. MATERIALS AND METHODS: 178 stem revisions performed between 01/1994 and 08/2008 using the Virtec straight stem were included. The cumulative incidence for re-revision was calculated using a competing risk model. Risk factors for re-revision of the stem were analyzed using an absolute risk regression model. Radiographs analyzed for osteolysis, debonding and subsidence had a minimum follow-up of 10 years. RESULTS: The cumulative incidence for re-revision due to aseptic loosening of the stem was 5.5% (95% CI, 2.9-10.2%) at 10 years. Aseptic loosening was associated with younger age, larger defect size and larger stem size. After a minimum 10-year follow-up, osteolysis was seen in 39 of 80 revision THA. Compared to the results in primary THA, the survival in revision THA with the same implant was inferior. CONCLUSIONS: Cemented straight stems used for revision THA showed excellent long-term results regarding survivorship and radiological outcome. This stem therefore offers a valuable and cost-effective option in revision THA.

Long-term survival of the cemented Müller CDH stem: a minimum follow-up of 10 years.

INTRODUCTION: Total hip arthroplasty in patients with altered anatomy of the hip and femur, such as in congenital dysplasia of the hip, is challenging and often requires specially designed stems. Müller straight stems have shown excellent long-term results; however, long-term data on the analogous cemented Müller CDH stem are still missing. The aim of this study was to analyze long-term survival, identify potential risk factors for aseptic loosening, and analyze radiological outcome of the cemented Müller CDH stems. MATERIALS AND METHODS: Between 01/1985 and 06/2005, 95 Müller CDH stems (Zimmer, Winterthur, Switzerland) made up of 3 different materials were cemented using 2 different bone cements: 38 of stainless steel/high-viscosity cement, 31 of a cobalt-chrome-based alloy (CoCr)/low-viscosity cement, and 26 of a titanium-based alloy (Ti)/low-viscosity cement. All patients had a prospective clinical and radiological follow-up according to the standards of our institution. The cumulative incidence for revision of the stem was calculated using a competing risk model. To identify demographic and implant-related risk factors for aseptic loosening of the stem, a multivariate regression model for competing risks was performed. RESULTS: The cumulative risk of revision at 15 years was 12.5% (95% CI 6.6-20.5%) for aseptic loosening of the stem as endpoint, with marked differences for the various stem materials used: stainless steel 2.7% (0.2-12.3%), CoCr 12.9% (4.0-27.3%), and Ti 24.5% (9.6-43.1%). Regression modeling revealed that Ti stems in combination with low-viscosity cement (HR 10.2) and implantation with an axis deviation greater than 3° (HR 3.8) are risk factors for aseptic loosening. CONCLUSIONS: Long-term survival of the cemented Müller CDH stem is comparable to other Müller-type straight stems and uncemented implants. Similar to the original Ti Müller straight stem, the Ti Müller CDH stem also showed an increased risk for aseptic loosening and should, therefore, no longer be used.

Excellent long-term results of the Müller acetabular reinforcement ring in primary cup revision.

Background and purpose - The original Müller acetabular reinforcement ring (ARR) was developed to be used for acetabular revisions with small cavitary and/or segmental defects or poor acetabular bone quality. Long-term data for this device are scarce. We therefore investigated long-term survival and radiographic outcome for revision total hip arthroplasty using the ARR. Patients and methods - Between October 1984 and December 2005, 259 primary acetabular revisions using an ARR were performed in 245 patients (259 hips). The mean follow-up time was 10 (0-27) years; 8 hips were lost to follow-up. The cumulative incidence for revision was calculated using a competing risk model. Radiographic assessment was performed for 90 hips with minimum 10 years' follow-up. It included evaluation of osteolysis, migration and loosening. Results - 16 ARRs were re-revised: 8 for aseptic loosening, 6 for infection, 1 for suspected infection, and 1 due to malpositioning of the cup. The cumulative re-revision rate for aseptic loosening of the ARR at 20 years was 3.7% (95% CI 1.7-6.8%). Assuming all patients lost to follow-up were revised for aseptic loosening, the re-revision rate at 20 years was 6.9% (95% CI 4.1-11%). The overall re-revision rate of the ARR for any reason at 20 years was 7.0% (95% CI 4.1-11%). 21 (23%) of the 90 radiographically examined ARR had radiographic changes: 12 showed isolated signs of osteolysis but were not loose; 9 were determined loose on follow-up, of which 5 were revised. Interpretation - Our data suggest that the long-term survival and radiographic results of the ARR in primary acetabular revision are excellent.

Eradication of infection, survival, and radiological results of uncemented revision stems in infected total hip arthroplasties.

Background and purpose - The use of uncemented revision stems is an established option in 2-stage procedures in patients with periprosthetic joint infection (PJI) after total hip arthroplasty (THA). However, in 1-stage procedures, they are still rarely used. There are still no detailed data on radiological outcome after uncemented 1-stage revisions. We assessed (1) the clinical outcome, including reoperation due to persistent infection and any other reoperation, and (2) the radiological outcome after 1- and 2-stage revision, using an uncemented stem. Patients and methods - Between January 1993 and December 2012, an uncemented revision stem was used in 81 THAs revised for PJI. Patients were treated with 1- or 2-stage procedures according to a well-defined algorithm (1-stage: n = 28; 2-stage: n = 53). All hips had a clinical and radiological follow-up. Outcome parameters were eradication of infection, re-revision of the stem, and radiological changes. Survival was calculated using Kaplan-Meier analysis. Radiographs were analyzed for bone restoration and signs of loosening. The mean clinical follow-up time was 7 (2-15) years. Results - The 7-year infection-free survival was 96% (95% CI: 92-100), 100% for 1-stage revision and 94% for 2-stage revision (95% CI: 87-100) (p = 0.2). The 7-year survival for aseptic loosening of the stem was 97% (95% CI: 93-100), 97% for 1-stage revision (95% CI: 90-100) and 97% for 2-stage revision (95% CI: 92-100) (p = 0.3). No further infection or aseptic loosening occurred later than 7 years postoperatively. The radiographic results were similar for 1- and 2-stage procedures. Interpretation - Surgical management of PJI with stratification to 1- or 2-stage exchange according to a well-defined algorithm combined with antibiotic treatment allows the safe use of uncemented revision stems. Eradication of infection can be achieved in most cases, and medium- and long-term results appear to be comparable to those for revisions for aseptic loosening.

Excellent long-term results of the Müller acetabular reinforcement ring in primary total hip arthroplasty: A prospective study on radiology and survival of 321 hips with a mean follow-up of 11 years.

BACKGROUND AND PURPOSE: The original Müller acetabular reinforcement ring (ARR) shows favorable medium-term results for acetabular reconstruction in total hip arthroplasty, where it is used when the acetabular bone stock is deficient. However, there are no data regarding long-term survival of the device. We therefore investigated long-term survival and analyzed radiological modes of failure. PATIENTS AND METHODS: Between 1984 and 2002, 321 consecutive primary arthroplasties using an ARR were performed in 291 patients. The mean follow-up time was 11 (0-25) years, and 24 hips were lost to follow-up. For survival analysis, we investigated 321 hips and the end of the follow-up was the date of revision, date of death, or the last patient contact date with implant still in situ. Radiological assessment was performed for 160 hips with a minimum of 10 years of follow-up and with radiographs of sufficient quality. It included evaluation of osteolysis, migration, and loosening. RESULTS: 12 ARR THAs were revised: 1 isolated ARR revision for aseptic loosening, 4 revisions of the ARR and the stem for aseptic loosening, 6 for infection, and 1 for recurrent dislocation. The cumulative revision rate for all components, for any reason, at 20 years was 15% (95% CI: 10-22), while for the ARR only it was 7% (95% CI: 4-12) for any reason and 3.4% (95% CI: 1-9) for aseptic loosening. 21 (13%) of 160 ARR THAs examined had radiological changes: 7 had osteolysis but were not loose, and 14 were radiologically loose but were not painful and not revised. INTERPRETATION: Our data suggest that the long-term survival of the ARR is excellent.

Similar effect of stem geometry on radiological changes with 2 types of cemented straight stem: The Müller stem and the Virtec stem compared in 711 hips.

BACKGROUND AND PURPOSE: There are 2 basic principles in cemented stem fixation: shape-closed and force-closed. We investigated 2 shape-closed straight stems, the Müller (MSS) and the Virtec (VSS), which differ only in geometrical cross section, to determine whether the difference in stem shape would affect the radiological results or long-term survival. PATIENTS AND METHODS: We included 711 hips (in 646 patients) that were operated on between July 1996 and July 2003. Patients randomly received either an MSS (n = 356) or a VSS (n = 355) and were followed prospectively. Radiographs taken at a follow-up of > 10 years were analyzed for osteolysis. Kaplan-Meier (KM) survival analysis was performed using various endpoints. We also performed Cox regression analysis to identify risk factors for aseptic loosening and osteolysis of the stem. RESULTS: After 10 years, KM survival with "revision of any component for any reason" was 92% (95% CI: 88-95) for the MSS and 95% (CI: 92-97) for the VSS (p = 0.1). With "revision for aseptic loosening of the stem" as the endpoint, KM survival was 96% (CI: 9-98) for the MSS and 98% (CI: 97-100) for the VSS (p = 0.2). Cox regression showed that none of the risk factors analyzed were independent regarding aseptic loosening of the stem or regarding osteolysis. INTERPRETATION: The MSS and the VSS showed excellent survival for aseptic loosening after 10 years. For the 2 different stem designs, we did not find any independent risk factors for aseptic loosening or development of osteolysis.

One-stage revision of infected hip arthroplasty: outcome of 39 consecutive hips.

PURPOSE: There are various options for treating periprosthetic joint infection (PJI). Two-stage exchange has traditionally been the gold standard. However, if the appropriate surgical intervention is chosen according to a rational algorithm, the outcome is similar when using all types of interventions. In an observational cohort study, the outcome of patients with PJI after hip replacement treated with one-stage revision was analysed. METHODS: All patients fulfilling all criteria for one-stage exchange according to the Infectious Diseases Society of America (IDSA) guidelines and six without preoperative identification of a microorganism were included. Implant removal, debridement and cemented or uncemented reimplantations were performed in a single intervention. If a cemented device was implanted, commercially available gentamicin cement was used in all cases. Antibiotic treatment was administered intravenously for at least 2 weeks, followed by oral therapy for a total duration of 3 months. Patients had standardised clinical and radiological follow-up visits. RESULTS: Between 1996 and 2011, 38 patients (39 hips) were treated with a one-stage procedure and followed for at least 2 years. Coagulase-negative staphylococci were the most frequent pathogens, and polymicrobial infection was observed in five cases. In 25 hips, an uncemented revision stem was implanted, and 37 hips received an acetabular reinforcement ring. The mean follow-up was 6.6 (2.0-15.1) years. No patient had persistent, recurrent or new infection. There were four stem revisions for aseptic loosening. The mean Harris Hip Score was 81 points (26-99) at the final follow-up. CONCLUSIONS: Excellent cure rate and function seen in our study suggest that one-stage exchange is a safe procedure, even without local antibiotic treatment, provided that the patient has no sinus tract or severe soft tissue damage, no major bone grafting is required and the microorganism is susceptible to orally administered agents with high bioavailability.

Phenotypic and genotypic characterisation of Staphylococcus aureus causing musculoskeletal infections.

One of the most common pathogens causing musculoskeletal infections remains Staphylococcus aureus. The aim of this multicentre study was to perform a phenotypic and genotypic characterisation of clinical S. aureus isolates recovered from musculoskeletal infections and to investigate differences between isolates cultured from Orthopaedic Implant Related Infections (OIRI) and those from Non-Implant Related Infections (NIRI). OIRI were further differentiated in two groups: Fracture Fixation-Device Infections (FFI) and Prosthetic Joint Infections (PJI). Three-hundred and five S. aureus strains were collected from 4 different Swiss and 2 French hospitals (FFI, n=112; PJI, n=105; NIRI, n=88). NIRI cases were composed of 27 Osteomyelitis (OM), 23 Diabetic Foot Infections (DFI), 27 Soft Tissue Infections (STI) and 11 postoperative Spinal Infections (SI). All isolates were tested for their ability to form biofilm, to produce staphyloxanthin and their haemolytic activity. They were typed by agr (accessory gene regulator) group, spa type and screened by PCR for the presence of genes of the most relevant virulence factors such as MSCRAMMs, Panton Valentine Leukotoxin (PVL), enterotoxins, exotoxins and toxic shock syndrome toxin. Overall, methicillin susceptible S. aureus (MSSA) was more prevalent than methicillin resistant S. aureus (MRSA) in this collection. The OIRI group trended towards a higher incidence of MRSA, gentamicin resistance and haemolysis activity than the NIRI group. Within the OIRI group, PJI isolates were more frequently strong biofilm formers than isolates from the FFI group. A statistically significant difference was observed between OIRI and NIRI isolates for the sdrE gene, the cna gene, the clfA gene and the bbp gene. Certain spa types (t230 and t041) with a specific genetic virulence pattern were only found in isolates cultured from OIRI. In conclusion, our study highlights significant trends regarding the virulence requirements displayed by S. aureus isolates associated with implant related infections in comparison to non-implant related infections. However, future studies including whole genome sequencing will be required to further examine genomic differences among the different infection cases.

The impact of pulmonary bone component embolism: an autopsy study.

AIMS: Pulmonary bone marrow embolism (BME) and pulmonary bone fragment embolism (BFE) are two types of non-thrombotic pulmonary embolism (NTPE). While BME can be found consistently in autopsies, BFE is a rarely observed event. Both these conditions have bone lesions as source of embolism and are not considered to be causative for death. METHODS: A retrospective autopsy study was performed and lung whole tissue slides were reviewed for the presence of pulmonary embolism. Clinicopathological data were screened for osseous lesions considered as risk factors for BME and BFE. RESULTS: We reviewed 985 consecutive, unselected autopsies and identified 29 cases of BME (2.9%) and 5 cases of BFE (0.5%). Both conditions were mutually exclusive. While BME showed a significant association with costal fractures, BFE was significantly associated with osteomyelitis and previously performed femur nailing. There were between 1 and 346 bone emboli in BFE with a density ranging from 0.74 to 30.5 emboli/cm(2) with mean embolic diameter of 45.8±37.6 µm. In two patients, BFE contributed significantly to fatal outcome. CONCLUSIONS: BME was associated with costal fractures, while BFE was associated with orthopaedic procedures and osteomyelitis. BFE can result in patient death. Both conditions appeared exclusively, indicating that although they originate from osseous lesions their underlying pathogenesis may likely be different.

Influence of leg length discrepancy on clinical results after total hip arthroplasty--a prospective clinical trial.

The effect of leg length differences on early clinical outcome after total hip arthroplasty remains uncertain. We performed a prospective study on 94 patients who were evaluated preoperatively and one year after surgery for clinical leg length differences, which were then compared with radiological measurements. The effect of leg length differences on walking ability, limp, pain and patient satisfaction was studied. The mean clinical leg length difference after operation was 0.05 cm (-1.5 to 1.5, SD 0.5). Clinical and radiological measurements correlated poorly (ω =0.36 pre- and ω =0.186 postoperatively). Patients with a shorter operated leg on clinical assessment were more prone to limping (p<0.05), and patients with a longer leg had more pain compared to patients with equal leg lengths (p<0.05). Walking ability, Harris Hip Score and patient satisfaction were only marginally affected by leg length differences. Virtually equal leg length was achieved for most patients but small differences had a negative influence in relation to limping and pain. Patients should be counselled pre-operatively about possible leg length differences and associated symptoms.

Osteointegration of orthopaedic devices.

The different properties of bone must be considered in order to understand the relation between orthopaedic devices and bone. The epi-/metaphyseal areas are defined by their rigidity, their high vascularity and their quick remodelling process. In contrast, the diaphyses of bone are rather elastic and built of dense, scarcely vascularised bone presenting slow remodelling. Implants can integrate by pure mechanical contact without real affinity to bone or, alternatively, they can favour ongrowth of bone, provided that they are osteoconductive. Amongst different bone substitutes, only some of them are absorbable. Only derivates of bone may present the property of osteoinduction, which is the power to create new bone in any region of the body. Orthopaedic devices are characterised by their shape, their stiffness or elasticity and by the characteristic properties of material. They may be osteoconductive such as titanium alloys and some ceramics, allowing integration in bone. Alternatively, other materials such as steel, CoCr alloys and PMMA cements remain separated from bone by a tiny layer of collagen. The surface structure influences the quality of integration. The integration of implants depends on the mutual interaction of the material with the tissue on the implantation site. All implants undergo fatiguing which can lead to fracture of the implant. All implant-bone contacts are threatened by granulation tissue mainly formed because of wear products, infection and other reasons.

Infectiological, functional, and radiographic outcome after revision for prosthetic hip infection according to a strict algorithm.

BACKGROUND AND PURPOSE: Successful treatment of prosthetic hip joint infection (PI) means elimination of infection and restored hip function. However, functional outcome is rarely studied. We analyzed the outcome of the strict use of a treatment algorithm for PI. PATIENTS AND METHODS: The study groups included 22 hips with 1-stage exchange for PI (group 1), 22 matched hips revised for aseptic loosening (controls), and 50 hips with 2-stage exchange (group 2). Relapse of infection, Harris hip score (HHS), limping, use of crutches, reoperations, complications, and radiographic changes were compared between the groups. RESULTS: There was 1 relapse of infection, which occurred in group 2. In group 1, the mean HHS was 84; 4 of 19 patients were limping and 2 required 2 crutches, which was similar to the control results. In group 2, scores were lower and complication rates higher. The use of a Burch-Schneider ring and the presence of a deficient trochanter impaired function. There were no differences in radiographic outcome between the groups. INTERPRETATION: With the algorithm used, infection can be cured with high reliability. With a 1-stage procedure, mobility is maintained. After 2-stage procedures, function was impaired due to there being more previous surgery and more serious infection.

Accelerated healing of the rat Achilles tendon in response to autologous conditioned serum.

BACKGROUND: Despite advances in the treatment of ruptured Achilles tendon, imperfections of endogenous repair often leave patients symptomatic. Local administration of autologous conditioned serum (ACS) in patients with inflammatory, degenerative conditions has shown beneficial effects. PURPOSE: Because ACS also contains growth factors that should accelerate tendon healing, we studied the effect of ACS on the healing of transected rat Achilles tendon. STUDY DESIGN: Controlled laboratory study. METHODS: In preliminary in vitro experiments, rat tendons were incubated with ACS and the effect on the expression of Col1A1 and Col3A1 was assessed by real-time quantitative polymerase chain reaction. To test its effect in vivo, the Achilles tendons of 80 Sprague Dawley rats were transected and sutured back together. Ten rats from each group (ACS group, n = 40; control group, n = 40) were euthanized at 1, 2, 4, and 8 weeks postoperatively for biomechanical (n = 7) and histologic (n = 3) testing. Lysyl oxidase activity was assayed by a flurometric assay. The organization of repair tissue was assessed histologically with hematoxylin and eosin- and with Sirius red-stained sections, and with immunohistochemistry. RESULTS: Tendons exposed to ACS in vitro showed a greatly enhanced expression of the Col1A1 gene. The ACS-treated tendons were thicker, had more type I collagen, and an accelerated recovery of tendon stiffness and histologic maturity of the repair tissue. However, there were no differences in the maximum load to failure between groups up to week 8, perhaps because lysyl oxidase activities were unchanged. CONCLUSION AND CLINICAL RELEVANCE: Overall, our study demonstrates that treatment with ACS has the potential to improve Achilles tendon healing and should be considered as a treatment modality in man. However, as strength was not shown to be increased within the parameters of this study, the clinical importance of the observed changes in humans still needs to be defined.