A triple growth factor strategy for optimizing bone augmentation in mice.

With dental implant treatment becoming the gold standard, the need for effective bone augmentation prior to implantation has grown. This study aims to evaluate a bone augmentation strategy integrating three key growth factors: bone morphogenetic protein-2 (BMP-2), insulin-like growth factor 1 (IGF-1), and vascular endothelial growth factor (VEGF). Collagen scaffolds incorporating BMP-2, IGF-1, or VEGF were fabricated and categorized into five groups based on their content: scaffold alone; BMP-2 alone (BMP-2); BMP-2 and IGF-1 (BI); BMP-2, IGF-1, and VEGF (BIV); and BMP-2 and IGF-1 with an earlier release of VEGF (BI + V). The prepared scaffolds were surgically implanted into the calvarias of C57BL/6JJcl mice, and hard tissue formation was assessed after 10 and 28 days through histological, tomographic, and biochemical analyses. The combination of BMP-2 and IGF-1 induced a greater volume of hard tissue augmentation compared with that of BMP-2 alone, regardless of VEGF supplementation, and these groups had increased levels of cartilage compared with others. The volume of hard tissue formation was greatest in the BIV group. In contrast, the BI + V group exhibited a hard tissue volume similar to that of the BI group. While VEGF and CD31 levels were highest in the BIV group at 10 days, there was no correlation at the same time point between hard tissue formation and the quantity of M2 macrophages. In conclusion, the simultaneous release of BMP-2, IGF-1, and VEGF proved to be effective in promoting bone augmentation.

Prevalence of neurotrophic tropomyosin receptor kinase (NTRK) fusion gene positivity in patients with solid tumors in Japan.

BACKGROUND: Members of the neurotrophic tropomyosin receptor kinase (NTRK) gene family, NTRK1, NTRK2, and NTRK3 encode TRK receptor tyrosine kinases. Intra- or inter-chromosomal gene rearrangements produce NTRK gene fusions encoding fusion proteins which are oncogenic drivers in various solid tumors. METHODS: This study investigated the prevalence of NTRK fusion genes and identified fusion partners in Japanese patients with solid tumors recorded in the Center for Cancer Genomics and Advanced Therapeutics database of comprehensive genomic profiling test. RESULTS: In the analysis population (n = 46,621), NTRK fusion genes were detected in 91 patients (0.20%). The rate was higher in pediatric cases (<18 years; 1.69%) than in adults (0.16%). NTRK gene fusions were identified in 21 different solid tumor types involving 38 different partner genes including 22 (57.9%) previously unreported NTRK gene fusions. The highest frequency of NTRK gene fusions was head and neck cancer (1.31%) and thyroid cancer (1.31%), followed by soft tissue sarcoma (STS; 0.91%). A total of 97 NTRK fusion gene partners were analyzed involving mainly NTRK1 (49.5%) or NTRK3 (44.2%) gene fusions. The only fusion gene detected in head and neck cancer was ETV6::NTRK3 (n = 22); in STS, ETV6::NTRK3 (n = 7) and LMNA::NTRK1 (n = 5) were common. Statistically significant mutual exclusivity of NTRK fusions with alterations was confirmed in TP53, KRAS, and APC. NTRK gene fusion was detected from 11 STS cases: seven unclassified sarcoma, three sarcoma NOS, and one Ewing sarcoma. CONCLUSIONS: NTRK gene fusion identification in solid tumors enables accurate diagnosis and potential TRK inhibitor therapy.

Anomaly detection of retention loss in fixed partial dentures using resonance frequency analysis and machine learning: An in vitro study.

PURPOSE: This study aimed to determine the usefulness of machine learning techniques, specifically supervised and unsupervised learning, for assessing the cementation condition between a fixed partial denture (FPD) and its abutment using a resonance frequency analysis (RFA) system. METHODS: An in vitro mandibular model was used with a single crown and three-unit bridge made of a high-gold alloy. Two cementation conditions for the single crown and its abutment were set: cemented and uncemented. Four cementation conditions were set for the bridge and abutments: both crowns were firmly cemented, only the premolar crown was cemented, only the molar crown was cemented, and both crowns were uncemented. For RFA under cementation conditions, 16 impulsive forces were directly applied to the buccal side of the tested tooth at a frequency of 4 Hz using a Periotest device. Frequency responses were measured using a 3D accelerometer mounted on the occlusal surface of the tested tooth. Both supervised and unsupervised learning methods were used to analyze the datasets. RESULTS: Using supervised learning, the fully cemented condition had the highest feature importance scores at approximately 3000 Hz; the partially cemented condition had the highest scores between 1000 and 2000 Hz; and the highest scores for the uncemented condition were observed between 0 and 500 Hz. Using unsupervised learning, the uncemented and partially cemented conditions exhibited the highest anomaly scores. CONCLUSIONS: Machine learning combined with RFA exhibits good potential to assess the cementation condition of an FPD and hence facilitate the early diagnosis of FPD retention loss.

Development of triple-functionalized calcium phosphate nanoparticles as an advanced drug delivery system for bone tissue repair.

Introduction: During tissue repair or regeneration, several bioactive molecules are released and interact with each other and act as complex additives or inhibitors for tissue reconstruction. In this study, the bone-healing effects of the combination treatment with tumor necrosis factor-α (TNF-α) inhibition, vascular endothelial growth factor A (VEGF-A) and bone morphogenetic protein-7 (BMP-7) release by gene silencing, and gene transfection with calcium phosphate nanoparticles (CaP) in the rat femoral head was histologically, morphologically, and biochemically evaluated. Methods: A triple-functionalized paste of CaP carrying plasmid DNA encoding for BMP-7 and for VEGF), and siRNA against TNF-α was developed and denoted as CaP3mix. To compare the effects of 3mixCaP, CaP with plasmid DNA encoding BMP-7, VEGF, or siRNA encoding TNF-α was prepared and denoted as CaP/PEI/pBMP-7/SiO2, CaP/PEI/pVEGF/SiO2, or CaP/PEI/siRNA-TNF-α/SiO2, respectively. The bone healing in bone defects in the rat femoral head was investigated after 10 and 21 days of implantation. Results: The levels of bone formation-related markers OCN, Runx2, and SP7 increased at the protein and gene levels in 3mixCaP after 10 days, and 3mixCaP significantly accelerated bone healing compared with the other treatments after 21 days of implantation. Conclusion: The triple-functionalized CaP paste loading plasmid DNA encoding BMP-7 and VEGF and siRNA encoding TNF-α is a promising bioactive material for bone tissue repair.

Impact of implant location on load distribution of implant-assisted removable partial dentures: a review of in vitro model and finite-element analysis studies.

BACKGROUND: Appropriate load distribution among the supporting elements is essential for the long-term success of implant-assisted removable partial dentures; however, there is little information available on load distribution. PURPOSE: This study aimed to evaluate the effect of implant location on load distribution in implant-assisted removable partial dentures by reviewing in vitro models and finite-element analysis studies. MATERIALS AND METHODS: English-language studies which examined the load distribution of implant-assisted removable partial dentures and were published between January 2001 and October 2022 were extracted from PubMed, ScienceDirect, and Scopus online databases, and manual searching. Two reviewers selected the articles based on the predetermined inclusion and exclusion criteria, followed by data extraction and analysis. RESULTS: Forty-seven studies were selected after evaluating the titles and abstracts of 264 articles; two were identified manually. After screening the text, 12 studies were included: six in vitro model experiments and six finite-element analysis studies. All included studies used a mandibular free-end missing model (Kennedy Class I or II). The influence of implant location on load distribution to the abutment tooth, implant, and mucosa under the denture base was summarized in three cases: implant at the premolar, first molar, and second molar region. Due to differences in the measurement method of load distribution and loading condition to the denture, the results differed among the studies. CONCLUSIONS: The implant location in implant-assisted removable partial dentures can affect load distribution to the supporting elements, such as the abutment tooth, implant, and mucosa under the denture base.

Difference in the Electromyographic Behavior of the Masticatory and Swallowing Muscles During Cued Versus Spontaneous Swallowing.

The risk of dysphagia and/or aspiration is determined using screening tests, such as the repeated saliva swallowing test and modified water swallowing test, which evaluate cued swallowing. However, humans masticate and swallow foods with various consistencies, forms, and amounts, without conscious awareness. Therefore, this study aimed to examine the difference in the behavior of masticatory and swallowing muscles during spontaneous versus cued swallowing through a series of mastication and swallowing processes by evaluating surface electromyogram (sEMG) signals. The effect of the consistency and amount of food on the behavior of these muscles was also investigated. The sEMG recordings of the masseter muscles and anterior belly of the digastric muscle for 12 subjects, and genioglossus muscle for 5 subjects were obtained. The genioglossus activity was recorded using custom-made ball electrodes. The test foods were cookies and tofu, in amounts of 2 g and 4 g. The normalized muscle activity (integrated EMG), duration of the muscle activity, initial activation timepoint of each muscle, and total duration of swallowing were compared among four conditions. The activity of each muscle was significantly higher during the swallowing of cookies than tofu, for 4 g vs 2 g, and for cued versus spontaneous swallowing. The duration of each muscle activity, initial activation timepoint, and total duration of swallowing were significantly longer for cookies versus tofu, for 4 g vs 2 g, and for spontaneous versus cued swallowing. These results suggest that the behavior of the masticatory and swallowing muscles is affected by cued swallowing and by the consistency and amount of food.

Effectiveness of exercise therapy on pain relief and jaw mobility in patients with pain-related temporomandibular disorders: a systematic review.

Background: Orofacial pain conditions are complex disorders that involve biological, social, and psychological factors. Temporomandibular Disorders (TMDs) are one of the most common orofacial pain conditions, and our previous literature review indicated that exercise therapy has shown promise in reducing TMD-related pain. However, more evidence is needed to firmly establish its effectiveness. Objectives: This systematic review aims to investigate the effectiveness of exercise therapy on pain relief and jaw mobility in patients with pain-related TMDs. Methods: To include randomized controlled trials (RCTs) written in English, a literature search was performed using PubMed, Scopus, Web of Science, Cochrane Library, Ovid, EBM reviews, and Academic Search Complete initially from 4th November 2020 until March 2022. A PICOS for this review was as follows; P: Patients with TMD myalgia or arthralgia, I: Excursion exercise, Stretch exercises, Resistance exercise, or Coordination exercise, C: No treatment or education only. O: Pain intensity and Range of Motion (ROM), S: RCTs. After title screening, a full-text assessment was done to extract data. According to Risk of Bias (RoB) 2.0, risk of bias was assessed in each included paper by 2 reviewers independently. Results: A total of 3,388 titles were identified from the electronic database search. After the screening and full-text evaluation, only 5 studies (145 participants) were eligible to be included. Among the exercise modalities, coordination exercise showed a significant effect on pain relief and improvement of joint mobility. Discussion: Due to the heterogeneity and small sample size of the included studies, a meta-analysis was not feasible. However, this systematic review suggested that exercise therapy, especially coordinate exercise, can be effective in managing painful TMD conditions. Further research is needed to establish optimal parameters for this patient population, as well as standardization and consistency in terminology and treatment structure.

Impact of post-freeze annealing on shrinkage of sucrose and trehalose lyophilisates.

Freeze-drying of pharmaceuticals produces lyophilisates with properties that depend on both the formulation and the process. Characterisation of the lyophilisate in terms of appearance is necessary not only to produce a visually appealing product, but also to gain insight into the freeze-drying process. The present study investigates the impact of post-freeze annealing on the volume of lyophilisates. For this purpose, sucrose and trehalose solutions were freeze-dried with different annealing conditions and the resulting lyophilisates were analysed with a 3D structured light scanner. The external structure of the lyophilisates was found to be dependent on the bulk materials as well as the choice of vials, while the volume was influenced by the annealing time and temperature. Additionally, differential scanning calorimetry was used to determine glass transition temperatures of frozen samples. As a novelty, the volumes of the lyophilisates and their corresponding glass transition temperatures were compared. This resulted in a correlation supporting the theory that the shrinkage of lyophilisates depends on the amount of residual water in the freeze-concentrated amorphous phase before drying. Understanding the volume change of lyophilisates, in combination with material properties such as glass transition temperature, forms the basis for relating physicochemical properties to process parameters in lyophilisation.

Introduction of tenomodulin by gene transfection vectors for rat bone tissue regeneration.

Introduction: Periodontal ligament is regenerated in association with hard tissue regeneration. Tenomodulin (Tnmd) expression has been confirmed in periodontal ligament and it reportedly inhibits angiogenesis or is involved in collagen fibril maturation. The introduction of Tnmd by gene transfection in bone tissue regeneration therapy might inhibit topical hard tissue formation and induce the formation of dense fibrous tissue. Therefore, the effect of Tnmd introduction by gene transfection technique in vitro and in vivo was investigated in this study. Methods: Osteogenesis- and chondrogenesis-related gene expression levels in osteoblastic cells (MC3T3E1) and rat bone marrow derived cells were detected using qPCR three days after gene transfection with plasmid DNA (Tnmd) using non-viral gene transfection vectors: a calcium phosphate-based gene transfection vector (CaP(Tnmd)) or a cationic polymer-based reagent (JetPEI (Tnmd)). Next, an atelocollagen scaffold with or without CaP (Tnmd) or JetPEI (Tnmd) was implanted into a rat calvaria bone defect, and the remaining bone defect volume and the tissue reaction at 28 days after surgery were evaluated. Results: Runx 2 and SP7 mRNA was reduced by JetPEI (Tnmd) in both cells, but not in CaP(Tnmd). The volume of expressed Tnmd was at 9 ng/mL in both gene transfection vector. The remaining bone defect volume of JetPEI (Tnmd) was significantly bigger than that of the other groups and CaP (EGFP), and that of CaP (Tnmd) was significantly bigger than that of CaP (EGFP). Conclusions: Tnmd introduction treatment inhibits bone formation in artificial bone defect, however, the effect of that was dependent on non-viral gene transfection vector.

Budget impact analysis of next-generation sequencing versus sequential single-gene testing in Japanese patients with advanced non-small-cell lung cancer.

BACKGROUND: Identification of genomic alterations (e.g., EGFR, ALK, ROS1, BRAF, NTRK, and MET) is essential for initiating targeted therapy in patients with advanced non-small-cell lung cancer (aNSCLC). This study estimated the budget impact of using the sequential single-gene (SSG) test, which tests for each mutation one at a time, versus next-generation sequencing (NGS), which tests for all mutations at the same time, among newly diagnosed patients with aNSCLC from a Japanese healthcare payer's perspective. METHODS: A budget impact model (BIM) was used to determine the expected budget impact associated with NGS for newly diagnosed aNSCLC in Japan over a 3-year period. The BIM compared the total costs (biopsy, testing, and treatment) and average turnaround time of "future NGS" and "current NGS" versus SSG testing. RESULTS: The adoption of current NGS over SSG testing had a budget impact of -0.24%, but adoption of future NGS over SSG testing had a budget impact of +4.33% across a 3-year time horizon on the Japanese budget for aNSCLC treatment. The adoption of current or future NGS over SSG testing would shorten the average turnaround time for testing. CONCLUSIONS: The adoption of current NGS over SSG testing would slightly decrease the yearly costs. However, the adoption of future or current NGS over SSG testing would shorten the average turnaround time, enabling faster identification of genomic alterations and earlier initiation of treatment for aNSCLC patients in Japan.

Sensory neuromuscular electrical stimulation for dysphagia rehabilitation: A literature review.

BACKGROUND: Dysphagia is a common disorder following a cerebrovascular accident. It can cause detrimental effects on patient's quality of life and nutrition intake, especially in older adults. Neuromuscular electrical stimulation has been one of the management strategies for acceleration of the recovery. This review summarises the current evidence on sensory threshold stimulation of the procedure. METHOD: This review compiled data from the Internet database PubMed, Cochrane Library and Scopus using combination of MeSH thesaurus: 'Sensory threshold', 'electrical stimulation', 'neuromuscular stimulation', 'Deglutition', 'Dysphagia'. Eleven studies were intergraded into the review. RESULTS: Most of the studies show significant improvement to the outcomes of sensory neuromuscular electrical stimulation treatment. In many cases, the results of the treatment are comparable or superior to motor threshold stimulation and conventional therapy. However, the study design and parameters of the procedure varied greatly without conclusive standardised guidelines. CONCLUSION: The sensory neuromuscular electrical stimulation (SNMES) is a viable treatment option for treating oropharyngeal dysphagia. The most suggested application parameters are an intensity at sensory threshold, a frequency of 80 Hz, an impulse time of 700 µs, a combined total duration of 20 h of stimulation in a 2-week period, and placing the electrodes in the submental area of the neck. However, further research is necessary to construct a definitive guideline for clinicians.

Impact of number of functional teeth on independence of Japanese older adults.

AIM: To examine the relationship between the number of present and functional teeth at baseline and future incidence of loss of independence. METHODS: Participants were community-dwelling older individuals who participated in a comprehensive geriatric health examination conducted in Kusatsu town, Japan, between 2009 and 2015. The primary endpoint was the incidence of loss of independence among participants, defined as the first certification of long-term care insurance in Japan. The numbers of present and functional teeth at baseline were determined via an oral examination. Demographics, clinical variables (e.g., history of chronic diseases and psychosocial factors), blood nutritional markers, physical functions, and perceived masticatory function were assessed. RESULTS: This study included 1121 individuals, and 205 individuals suffered from loss of independence during the follow-up period. Kaplan-Meier estimates of loss of independence for participants with smaller numbers of present and functional teeth were significantly greater than for those with larger numbers of teeth. Cox proportional hazard analyses indicated that a smaller number of present teeth was not a significant risk factor after adjusting for demographic characteristics. However, the number of functional teeth was a significant risk factor after the adjustment (hazard ratio: 1.975 [1.168-3.340]). Additionally, higher hazard ratios were observed in other adjusted models, but they were not statistically significant. CONCLUSIONS: The number of functional teeth may be more closely related to the future incidence of loss of independence than the number of present teeth. This novel finding suggests that prosthodontic rehabilitation for tooth loss possibly prevents the future incidence of this life-event. Geriatr Gerontol Int 2022; 22: 1032-1039.

Quantitative Analysis of Glassy State Relaxation and Ostwald Ripening during Annealing Using Freeze-Drying Microscopy.

Supercooling during the freezing of pharmaceutical solutions often leads to suboptimal freeze-drying results, such as long primary drying times or a collapse in the cake structure. Thermal treatment of the frozen solution, known as annealing, can improve those issues by influencing properties such as the pore size and collapse temperature of the lyophilisate. In this study we aimed to show that annealing causes a rearrangement of water molecules between ice crystals, as well as between the freeze-concentrated amorphous matrix and the crystalline ice phase in a frozen binary aqueous solution. Ice crystal sizes, as well as volume fractions of the crystalline and amorphous phases of 10% (w/w) sucrose and trehalose solutions, were quantified after annealing using freeze-drying microscopy and image labelling. Depending on the annealing time and temperature, the amorphous phase was shown to decrease its volume due to the crystallisation of vitreous water (i.e., glassy state relaxation) while the crystalline phase was undergoing coarsening (i.e., Ostwald ripening). These results allow, for the first time, a quantitative comparison of the two phenomena. It was demonstrated that glassy state relaxation and Ostwald ripening, although occurring simultaneously, are distinct processes that follow different kinetics.

Resonance frequency analysis for evaluation of the connecting condition between fixed prostheses and their abutment teeth: An in vitro and finite element analysis study.

STATEMENT OF PROBLEM: Loss of retention is a clinical complication for fixed partial dentures (FPDs). However, a method sensitive enough to measure the early retention loss of FPDs is lacking. PURPOSE: The purpose of this in vitro and finite element analysis (FEA) study was to determine whether resonance frequency analysis (RFA) with a newly developed system can detect lack of FPD retention caused by cement loss. MATERIALS AND METHODS: Two evaluation methods were used: RFA of an in vitro model of a 3-unit FPD from the second premolar to the second molar and FEA by using a simplified model. The in vitro model was used to evaluate 4 connecting conditions: both crowns cemented, only the premolar crown cemented, only the molar crown cemented, and both crowns uncemented. Tapping stimulation (16 impulsive forces, 4 Hz) was directly applied to the buccal side of the second molar or the second premolar, and an attached 3D accelerometer sensor was used to record the resonance frequency (RF) of the tapped tooth. The amplitude, frequency, Q-value, and total area under the curve (AUC) of the RF values in the buccolingual direction were compared between connecting conditions. The FEA was done by using a simplified model of a 3-unit FPD with similar connecting conditions as the in vitro model study, and the RF amplitude and frequency of each tooth were calculated. Statistical evaluation included 1-way analysis of variance and the Tukey HSD test to compare the differences among each connecting condition under each parameter for measurement sites on the molar and the premolar, respectively (α=.05). RESULTS: For both the molar and premolar measurements in both the in vitro and FEA models, when the measurement site was on the uncemented tooth, the amplitude of RF-1 increased, the Q-value of RF-2 decreased, and the area under the curve increased (P<.05). CONCLUSIONS: The same 3 trends found between the measurement sites of the in vitro study and FEA indicated that RFA may be useful for detecting an FPD with loosening caused by cement loss, even partial cement loss.

Application of Diffusion Tensor Imaging Fiber Tractography for Human Masseter Muscle.

Diffusion tensor imaging (DTI) has been used to indicate the direction of nerve and muscle fibers by using the characteristics that water molecules preferentially diffuse along the fibrous structure. However, DTI fiber tractography for multipennate muscles, such as the masseter muscle, is challenging due to a lack of data regarding the imaging parameters. This study aimed to determine the optimal DTI parameters for masseter muscle fiber tractography. A 27-year-old healthy man voluntarily underwent DTI and T1-weighted magnetic resonance imaging of the right masseter muscle. Four imaging parameter settings were created by combining the following parameters that particularly affect the signal-to-noise ratio: b-value, number of excitations (NEX), and number of motion probing gradient (MPG) directions. DTI fiber tractography was performed using specific software for each parameter setting. The length and orientation of the muscle fibers in each layer were calculated. As a result, the masseter muscle fibers of each layer were identified on DTI. Although the detected fiber length was affected significantly by the imaging parameters, the fiber orientation was insignificantly affected. The appropriate combination of the b-value, NEX, and the number of MPG directions for masseter muscle fiber tractography could be determined based on previously reported anatomical data of the masseter muscle fibers. DTI may enable the non-invasive evaluation of masseter muscle fiber length and orientation. Elucidation of the details of masseter muscle fiber orientation is useful in evaluating stomatognathic biomechanics and muscle disorders.

Morphological comparison of masseter muscle fibres in the mandibular rest and open positions using diffusion tensor imaging.

BACKGROUND: The masseter muscle has a complicated multipennate internal structure and exhibits functional differentiation when performing various stomatognathic functions. It is important to understand the internal structural changes of the muscle during functioning to elucidate characteristic muscle disorders such as local myalgia. Diffusion tensor imaging (DTI) may be useful for investigating the internal structural features of muscle. OBJECTIVES: To evaluate the features of masseter muscle fibres in human participants using DTI fibre tractography, and to elucidate the structural differences in the masseter muscle between the mandibular rest and open positions. METHODS: Five healthy men (age 31 ± 7 years) underwent DTI and T1-weighted MRI of the right masseter muscle in the mandibular rest and open positions. MR images were used as a reference for muscle layer segmentation (superficial, intermediate, and deep). DTI fibre tractography of the masseter muscle was performed and the orientation of the DTI fibres was analysed in each layer using coordinates based on the Frankfurt horizontal plane. RESULTS: The DTI fibre orientation of the deep layer significantly changed between the mandibular rest and open positions in the frontal plane (p < 0.05, Wilcoxon rank sum test). However, no significant change was found in the superficial and intermediate layers. CONCLUSION: DTI fibre tractography confirmed regional differences in the orientation change of the masseter muscle fibres between different mandibular positions. The results may support the existence of functional partitioning inside the masseter muscle and suggest that DTI may be useful for the evaluation of muscle fibres in multipennate muscles.

Development of a method for preparing cyclic nigerosylnigerose syrup and investigation of its value as a dietary fiber.

Cyclic nigerosylnigerose (CNN) syrup, containing 76% water-soluble dietary fiber, was prepared from starch on an industrial scale, using isoamylase, 6-α-glucosyltransferase, 3-α-isomaltosyltransferase, and cyclodextrin glucanotransferase. CNN syrup has a unique linkage pattern, consisting mainly of α-1,3 and α-1,6 glucoside linkages, and is characterized by its low weight average molecular weight (807) and moderate sweetness (relative sweetness = 25), unlike in well-known dietary fiber materials. The glass transition temperature of CNN is higher than that of the straight chain structures, maltotetraose and maltosyltrehalose. Even when 40% of normally added sucrose was replaced with CNN syrup, sponge cake puffed up sufficiently. The no observed adverse effect level for a single dose of CNN syrup was 0.88 and 0.89 g dry solid/kg body weight for men and women, respectively. The increase in blood glucose and insulin concentrations during consumption of CNN syrup was lower than that of glucose.

Effectiveness of the socket shield technique in dental implant: A systematic review.

PURPOSE: Dental implant therapy is a common clinical treatment for missing teeth. However, the esthetic result is not as satisfactory as expected in some cases, especially in the anterior maxillary area. Poor esthetic results are caused by inadequate preparation of the hard and soft tissues in this area before treatment. The socket shield technique may be an alternative for a desirable esthetic outcome in dental implant treatments. STUDY SELECTION: In the present systematic review, PubMed-Medline, Google Scholar, and ScienceDirect were searched for clinical studies published from January 2000 to December 2018. RESULTS: Twenty studies were included, comprising one randomized controlled trial, two cohort studies, 14 clinical human case reports, and three retrospective case series. In total, 288 patients treated with the socket shield technique with immediate implant placement and follow-up between 3-60 months after placement were included. A quality assessment showed that 12 of the 20 included studies were of good quality. Twenty-six of the 274 (9.5%) cases developed complications or adverse effects related to the socket shield technique. Most studies reported implant survival without the complications (90.5%); most of the cases that were followed up for more than 12 months after implant placement achieved a good esthetic appearance. The failure rate was low without the complications, although there were some failures due to failed implant osseointegration, socket shield mobility and infection, socket shield exposure, socket shield migration, and apical root resorption. CONCLUSIONS: The socket shield technique can be used in dental implant treatment, but it remains difficult to predict the long-term success of this technique until high-quality evidence becomes available.

Osteogenic effect of low-intensity pulsed ultrasound and whole-body vibration on peri-implant bone. An experimental in vivo study.

OBJECTIVES: The aims of this study were (i) to compare the osteogenic impact of low-intensity pulsed ultrasound (LIPUS) and low-magnitude high-frequency (LMHF) loading achieved with whole-body vibration (WBV) on peri-implant bone healing and implant osseointegration in rat tibiae, and (ii) to examine their combined effect on these processes. MATERIAL AND METHODS: Titanium implants were inserted in the bilateral tibiae of 28 Wistar rats. Rats were randomly divided into four groups: LIPUS + WBV, LIPUS, WBV, and control. LIPUS was applied to the implant placement site for 20 min/day on 5 days/week (1.5 MHz and 30 mW/cm2 ). WBV was applied for 15 min/day on 5 days/week (50 Hz and 0.5 g). In the LIPUS + WBV group, both stimuli were applied under the same stimulation conditions as in the LIPUS and WBV groups. After 4 weeks of treatment, peri-implant bone healing and implant osseointegration were assessed using removal torque (RT) tests, micro-CT analyses of relative gray (RG) value, and histomorphometrical analyses of bone-to-implant contact (BIC) and peri-implant bone formation (BV/TV). RESULTS: The LIPUS + WBV group had significantly greater BIC than the WBV and control groups. Although there were no significant intergroup differences in RT, RG value, and BV/TV, these variables tended to be greater in the LIPUS + WBV group than the other groups. CONCLUSIONS: The combination of LIPUS and LMHF loading may promote osteogenic activity around the implant. However, further study of the stimulation conditions of LIPUS and LMHF loading is necessary to better understand the osteogenic effects and the relationship between the two stimuli.