Efficient reverse water gas shift reaction at low temperatures over an iron supported catalyst under an electric field.

The development of high-performance Fe-based catalysts is attractive because Fe is a cost-effective and earth-abundant element. Application of an external electric field and an appropriate catalytic support to an Fe-based catalyst enabled the reverse water-gas shift reaction to proceed with high activity, selectivity, and durability even at the low temperature of 423 K. The Fe-supported catalyst showed superior CO selectivity (≈ 100%) compared to the Co- or Ni-supported catalyst. The apparent activation energy (5.9 kJ mol-1) over the Fe/Ce0.4Al0.1Zr0.5O2 catalyst under an electric field was much lower than that without an electric field (61.4 kJ mol-1).

Factors governing the protonation of Keggin-type polyoxometalates: influence of the core structure in clusters.

Atomic substitution is a promising approach for controlling structures and properties for developing clusters with desired responses. Although many possible coordination candidates could be deduced for substitution, not all can be prepared. Therefore, predicting the correlation between structures and physical properties is important prior to synthesis. In this study, regarding Keggin-type polyoxometalates (POMs) as a model cluster, the dominant factors affecting the protonation were investigated by atomic substitutions and geometry changes. The valence of Keggin-type POMs and the constituent elements of the cluster shell structure affect the charge and potential distribution, which change the protonation sites. Furthermore, the valence of Keggin-type POMs and the bond length between the core and shell structure determine the protonation energy. These factors also affect the HOMO-LUMO gap, which governs photochemical and redox reactions. These governing factors derived from actual parameters of the α-isomer of Keggin-type POMs enabled us to deduce the protonation energy of the ß-isomer, which is more difficult to prepare and isolate than the α-isomer.

Vanadium-Containing Keggin-Type Polyoxometalates, [VM12O40]3- and [VVM11O40]4- (M = Mo, W): Structural Characterization and Voltammetric, NMR, and EPR Studies Related to Electrochemical Reduction at Framework and Central Vanadium Sites.

Vanadium is accommodated in both the framework (VoutV) and central positions (VinV) in the Keggin-type polyoxometalates (POMs) [VinVVoutVM11O40]4- (M = Mo, W; VinVVoutVM11) and in the central position in [VinVM12O40]3- (VinVM12). The structures of the VinVVoutVM11 class have been determined by X-ray crystallography and compared to those of VinVM12 reported previously. A major feature of interest with POMs is their capacity for very extensive reduction, particularly when protonation accompanies the electron transfer step. With VinVVoutVM11 and VinVM12 POMs, knowledge as to whether reduction occurs at V or M sites and the concomitant dependence on acidity has been obtained. Frozen solution EPR spectra obtained following bulk electrolysis showed that the one-electron reduction of VinVMo12 occurs at the molybdenum framework site to give VinVMoVMo11. In contrast, EPR spectra of one-electron reduced VinVW12 at <30 K are consistent with the electron being accommodated on the central V atom in a tetrahedral environment to give VinIVW12. In the case of VinVVoutVM11, the initial reduction occurs at the framework VoutV site to give VinVVoutIVM11. The second electron is delocalized over the Mo framework in two-electron reduced VinVVoutIVMoVMo10, whereas it is accommodated on the central V site in VinIVVoutIVW11. The distance between VinIV and VoutIV in VinIVVoutIVW11 estimated as 3.5 ± 0.2 Å from analysis of the EPR spectrum is consistent with that obtained in VinVVoutVW11 from crystallographic data. Simulations of the cyclic voltammograms as a function of CF3SO3H acid concentration for the initial reduction processes provide excellent agreement with experimental data obtained in acetonitrile (0.10 M [n-Bu4N][PF6]) and allowed acid association constants to be estimated and compared with the literature values available for [XVoutVM11O40]n- (X = S (n = 3), P and As (n= 4); M = Mo, W). The interpretation of the voltammetric data is supported by 51V NMR measurements on the oxidized VV forms of the POMs.

Elucidation of the reaction mechanism on dry reforming of methane in an electric field by in situ DRIFTs.

With increasing expectations for carbon neutrality, dry reforming is anticipated for direct conversion of methane and carbon dioxide: the main components of biogas. We have found that dry reforming of methane in an electric field using a Pt/CeO2 catalyst proceeds with sufficient rapidity even at a low temperature of about 473 K. The effect of the electric field (EF) on dry reforming was investigated using kinetic analysis, in situ DRIFTs, XPS, and DFT calculation. In situ DRIFTs and XPS measurements indicated that the amount of carbonate, which is an adsorbed species of CO2, increased with the application of EF. XPS measurements also confirmed the reduction of CeO2 by the reaction of surface oxygen and CH4. The reaction between CH4 molecules and surface oxygen was promoted at the interface between Pt and CeO2.

Electrochemical antioxidant capacity measurement: a downsized system and its application to agricultural crops.

An on-site electrochemical antioxidant capacity measurement system was developed using a screen print electrode (SPE) and circuit tester. The antioxidant capacities of eight antioxidants were evaluated with the handheld electrochemical antioxidant capacity measurement system to compare with those measured with spectroscopic methods, namely, oxygen radical absorbance capacity (ORAC) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging assays, as well as the reported electrochemical method with three conventional electrodes (a glassy carbon electrode, Ag/AgCl electrode and platinum wire electrode) and a potentiostat. Additionally, the potential shifts were proportional to the logarithm of the antioxidant concentration, which obeyed the Nernstian equation. Moreover, the antioxidant capacities of extracts from vegetables (green pepper, ginger and eggplant) were measured with a handheld electrochemical system. Each measurement was finished in only ca. 3 min. The electrochemically obtained antioxidant data were comparable to those from DPPH free-radical scavenging assays and superoxide anion scavenging activity (SOSA) assays, as well as the total phenolic compound content.

Polyoxometalates in Imidazolim-based Ionic Liquids: Acceptor Number and Polarity Estimated from Their Voltammetric Behaviour.

The selection of an appropriate solvent is essential for achieving high yields and selectivity in chemical reactions. The chemical and physical parameters of organic solvents have been classified into several groups, and solvents can be compared with each other with respect to these properties. The acceptor number (AN), donor number (DN) and polarity (ETN) have been widely accepted and used for theoretically and quantitatively evaluating the properties of organic solvents. In a similar manner, the AN, DN and ETN of room temperature ionic liquids (RTILs) have been estimated from spectral changes in solvatochromic compounds. In this paper, the AN and ETN of eight types of imidazolium-based RTILs were estimated from the relationship between the AN and ETN values and the first redox potential obtained from the voltammograms of polyoxometalates (POMs) in various organic solvents. The obtained parameters were compared with those estimated by spectrophotometric methods reported previously by several groups. This new method for estimating the AN and ETN of RTILs using the voltammetric behaviour of POMs with low charge density and high symmetry could provide the other path to obtain more reliable AN and ETN of RTILs.

Impact of the Lithium Cation on the Voltammetry and Spectroscopy of [XVM11O40]n- (X = P, As (n = 4), S (n = 3); M = Mo, W): Influence of Charge and Addenda and Hetero Atoms.

Polyoxometalates (POMs) have been proposed as electromaterials for lithium-based batteries because they provide access to multiple electron transfer reactions coupled to fast lithium ion transport processes and high stability over many redox cycles. Consequently, knowledge of reversible potentials and Li+ cation-POM anion interactions provides a strategic basis for their further development. In this study, detailed cyclic voltammetric studies of a series of [XVVM11O40]n- (XVM11n-) POMs (where X (heteroatom) = P (n = 4), As (n = 4), and S (n = 3) and M (addenda atom) = Mo, W) have been undertaken in CH3CN in the presence of LiClO4, with n-Bu4NPF6 also present when required to keep the ionic strength close to constant value of 0.1 M. An analysis of the data has allowed the impact of the POM charge, and addenda and hetero atoms on the reversible potentials and the interaction between Li+ and the oxidized XVVM11n- and reduced XVIVM11(n+1)- forms of the VV/IV redox couple to be determined. The SVV/IVM113-/4- process is independent of the Li+ concentration, implying the absence of the association of this cation with either SVVM113- or SVIVM114- redox levels. However, lithium-ion association constants for both VV and VIV redox levels were obtained from a comparison of simulated and experimental cyclic voltammograms for the reduction of the more negatively charged XVVM114- (X = P, As; M = Mo, W), since the Li+ interaction with these more negatively charged POMs is much stronger. The interaction between Li+ and the oxidized, XVVM11n-, and reduced, XVIVM11(n+1)-, forms was also investigated by 51V NMR and EPR spectroscopy, respectively, and it was confirmed that, due to their lower charge density, SVVM113- and SVIVM114- interact significantly less strongly with the lithium ion than XVVM114- and XVIVM115- (X = P, As). The lithium-POM association constants are substantially smaller than the corresponding proton association constants reported previously, which is attributed to a smaller surface charge density. The much stronger impact of Li+ on the WVI/V- and MoVI/V-based reductions that occur at more negative potentials than the VV/IV process also has been qualitatively evaluated.

Agglomeration Suppression of a Fe-Supported Catalyst and its Utilization for Low-Temperature Ammonia Synthesis in an Electric Field.

Fe-supported heterogeneous catalysts are used for various reactions, including ammonia synthesis, Fischer-Tropsch synthesis, and exhaust gas cleaning. For the practical use of Fe-supported catalysts, suppression of Fe particle agglomeration is the most important issue to be resolved. As described herein, we found that Al doping in an oxide support suppresses agglomeration of the supported Fe particle. Experimental and computational studies revealed two tradeoff Al doping effects: the Fe particle size decreased and remained without agglomeration by virtue of the anchoring effect of doped Al. Also, some Fe atoms anchored by Al cannot function as an active site because of bonding with oxygen atoms. Using an appropriate amount of Al doping is effective for increasing the number of active Fe sites and catalytic activity. This optimized catalyst showed high practical activity and stability for low-temperature ammonia synthesis in an electric field. The optimized catalyst of 12.5 wt % Fe/Ce0.4Al0.1Zr0.5O2-δ showed the highest ammonia synthesis rate (2.3 mmol g-1 h-1) achieved to date under mild conditions (464 K, 0.9 MPa) in an electric field among the Fe catalysts reported.

Key factor for the anti-Arrhenius low-temperature heterogeneous catalysis induced by H+ migration: H+ coverage over support.

Low-temperature heterogeneous catalytic reaction in an electric field is anticipated as a novel approach for on-demand and small-scale catalytic processes. This report quantitatively reveals the important role of proton coverage on the catalyst support for catalytic ammonia synthesis in an electric field, which shows an anti-Arrhenius behaviour.

First observation of surface protonics on SrZrO3 perovskite under a H2 atmosphere.

This is the first direct observation that surface proton hopping occurs on SrZrO3 perovskite even under a H2 (i.e. dry) atmosphere. Understanding proton conduction mechanisms on ceramic surfaces under a H2 atmosphere is necessary to investigate the role of proton hopping on the surface of heterogeneous catalysts in an electric field. In this work, surface protonics was investigated using electrochemical impedance spectroscopy (EIS). To extract the surface proton conduction, two pellets of different relative densities were prepared: a porous sample (R.D. = 60%) and a dense sample (R.D. = 90%). Comparison of conductivities with and without H2 revealed that only the porous sample showed a decrease in the apparent activation energy of conductivity by supplying H2. H/D isotope exchange tests revealed that the surface proton is the dominant conductive species over the porous sample with H2 supply. Such identification of a dominant conductive carrier facilitates consideration of the role of surface protonics in chemical reactions.

Heteroatom doping effects on interaction of H2O and CeO2 (111) surfaces studied using density functional theory: Key roles of ionic radius and dispersion.

Understanding heteroatom doping effects on the interaction between H2O and cerium oxide (ceria, CeO2) surfaces is crucially important for elucidating heterogeneous catalytic reactions of CeO2-based oxides. Surfaces of CeO2 (111) doped with quadrivalent (Ti, Zr), trivalent (Al, Ga, Sc, Y, La), or divalent (Ca, Sr, Ba) cations are investigated using density functional theory (DFT) calculations modified for onsite Coulomb interactions (DFT + U). Trivalent (except for Al) and divalent cation doping induces the formation of intrinsic oxygen vacancy (Ovac), which is backfilled easily by H2O. Partially OH-terminated surfaces are formed. Furthermore, dissociative adsorption of H2O is simulated on the OH terminated surfaces (for trivalent or divalent cation doped models) and pure surfaces (for Al and quadrivalent cation doped surfaces). The ionic radius is crucially important. In fact, H2O dissociates spontaneously on the small cations. Although a slight change is induced by doping as for the H2O adsorption energy at Ce sites, the H2O dissociative adsorption at Ce sites is well-assisted by dopants with a smaller ionic radius. In terms of the amount of promoted Ce sites, the arrangement of dopant sites is also fundamentally important.

Effects of metal cation doping in CeO2 support on catalytic methane steam reforming at low temperature in an electric field.

Catalytic methane steam reforming was conducted at low temperature using a Pd catalyst supported on Ce1-x M x O2 (x = 0 or 0.1, M = Ca, Ba, La, Y or Al) oxides with or without an electric field (EF). The effects of the catalyst support on catalytic activity and surface proton hopping were investigated. Results show that Pd/Al-CeO2 (Pd/Ce0.9Al0.1O2) showed higher activity than Pd/CeO2 with EF, although their activity was identical without EF. Thermogravimetry revealed a larger amount of H2O adsorbed onto Pd/Al-CeO2 than onto Pd/CeO2, so Al doping to CeO2 contributes to greater H2O adsorption. Furthermore, electrochemical conduction measurements of Pd/Al-CeO2 revealed a larger contribution of surface proton hopping than that for Pd/CeO2. This promotes the surface proton conductivity and catalytic activity during EF application.

Support effects on catalysis of low temperature methane steam reforming.

Low temperature (<500 K) methane steam reforming in an electric field was investigated over various catalysts. To elucidate the factors governing catalytic activity, activity tests and various characterization methods were conducted over various oxides including CeO2, Nb2O5, and Ta2O5 as supports. Activities of Pd catalysts loaded on these oxides showed the order of CeO2 > Nb2O5 > Ta2O5. Surface proton conductivity has a key role for the activation of methane in an electric field. Proton hopping ability on the oxide surface was estimated using electrochemical impedance measurements. Proton transport ability on the oxide surface at 473 K was in the order of CeO2 > Nb2O5 > Ta2O5. The OH group amounts on the oxide surface were evaluated by measuring pyridine adsorption with and without H2O pretreatment. Results indicate that the surface OH group concentrations on the oxide surface were in the order of CeO2 > Nb2O5 > Ta2O5. These results demonstrate that the surface concentrations of OH groups are related to the proton hopping ability on the oxide surface. The concentrations reflect the catalytic activity of low-temperature methane steam reforming in the electric field.

Fast oxygen ion migration in Cu-In-oxide bulk and its utilization for effective CO2 conversion at lower temperature.

Efficient activation of CO2 at low temperature was achieved by reverse water-gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu-In structured oxide, even at lower temperatures. Results show that a novel Cu-In2O3 structured oxide can show a remarkably higher CO2 splitting rate than ever reported. Various analyses revealed that RWGS-CL on Cu-In2O3 is derived from redox between Cu-In2O3 and Cu-In alloy. Key factors for high CO2 splitting rate were fast migration of oxide ions in the alloy and the preferential oxidation of the interface of alloy-In2O3 in the bulk of the particles. The findings reported herein can open up new avenues to achieve effective CO2 conversion at lower temperatures.

Electric Field and Mobile Oxygen Promote Low-Temperature Oxidative Coupling of Methane over La1-x Ca x AlO3-δ Perovskite Catalysts.

Oxidative coupling of methane (OCM) over La1-x M x AlO3-δ (M = Ca, Sr, Ba; x = 0, 0.1, 0.2, 0.3) in an electric field at low temperature (423 K) was investigated. Among the tested catalysts, the La0.7Ca0.3AlO3-δ catalyst showed the highest performance in terms of C2H6 + C2H4 yield (11.1%). Surface mobile oxygen species (O2 2- or O-), which were considered as active oxygen species for the OCM reaction, increased with increasing Ca doping amount, and thereby the La0.7Ca0.3AlO3-δ catalyst showed the best catalytic activity.

Enhanced methane activation on diluted metal-metal ensembles under an electric field: breakthrough in alloy catalysis.

Methane activation on diluted metal ensembles is a challenging task in the field of alloy chemistry. This report describes that synergy between an electric field and Pd-Zn alloy allows improved catalytic activities in the steam reforming of methane. Because of surface protonics, Pd-Pd ensembles are no longer needed. Ligand effects facilitate methane conversion.

Ambient-temperature oxidative coupling of methane in an electric field by a cerium phosphate nanorod catalyst.

CePO4 nanorods with uniform surface Ce sites could work as a durable catalyst and showed the highest C2 yield of 18% in an electric field without the need for external heating, which was comparable to that reported for high-performance catalysts at high temperature (>900 K).

Irreversible catalytic methylcyclohexane dehydrogenation by surface protonics at low temperature.

Liquid organic hydrides are regarded as promising for use as hydrogen carriers via the methylcyclohexane (MCH)-toluene-hydrogen cycle. Because of the endothermic nature of MCH dehydrogenation, the reaction is usually conducted at temperatures higher than 623 K. In this work, low-temperature catalytic MCH dehydrogenation was demonstrated over 3 wt% Pt/CeO2 catalyst by application of electric field across a fixed-bed flow reactor. Results show that a high conversion of MCH beyond thermodynamic equilibrium was achieved even at 423 K. Kinetic analyses exhibited a positive correlation of hydrogen to the reaction rates and an "inverse" kinetic isotope effect (KIE), suggesting that accelerated proton hopping with the H atoms of MCH promotes the reaction. Operando analyses and DFT calculation proved that the reverse reaction (i.e. toluene hydrogenation) was suppressed by the facilitation of toluene desorption in the electric field. The electric field promoted MCH dehydrogenation by surface proton hopping, even at low temperatures with an irreversible pathway.

Perovskite lattice oxygen contributes to low-temperature catalysis for exhaust gas cleaning.

A Pd catalyst supported on Ba-substituted LaAlO3 perovskite (Pd/La0.9Ba0.1AlO3-δ ) was investigated for NO reduction at low temperature by propylene, which revealed that Pd/La0.9Ba0.1AlO3-δ has remarkably higher activity than other Pd catalysts at low temperatures (≤573 K) for NO reduction by propylene. To elucidate the surface reaction pathway, transient response tests were conducted using 18O2. Also, X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements were conducted. Comparison with a Ba-impregnated catalyst (Pd/Ba/LaAlO3) demonstrated that Pd/La0.9Ba0.1AlO3-δ shows higher activity for the formation of oxygenated species (C x H y O z ) as an intermediate for NO reduction because the surface lattice oxygen has improved mobility via Ba2+ substitution in LaAlO3. Therefore, Pd/La0.9Ba0.1AlO3-δ have high activity for NO reduction, even at low temperatures in a humid condition.

Low-temperature selective catalytic dehydrogenation of methylcyclohexane by surface protonics.

The methylcyclohexane (MCH)-toluene cycle is a promising liquid organic hydride system as a hydrogen carrier. Generally, MCH dehydrogenation has been conducted over Pt-supported catalysts, for which it requires temperatures higher than 623 K because of its endothermic nature. For this study, an electric field was applied to Pt/TiO2 catalyst to promote MCH dehydrogenation at low temperatures. Selective dehydrogenation was achieved with the electric field application exceeding thermodynamic equilibrium, even at 423 K. With the electric field, "inverse" kinetic isotope effect (KIE) was observed by accelerated proton collision with MCH on the Pt/TiO2 catalyst. Moreover, Pt/TiO2 catalyst showed no methane by-production and less coke formation during MCH dehydrogenation. DRIFTS and XPS measurements revealed that electron donation from TiO2 to Pt weakened the interaction between catalyst surface and π-coordination of toluene. Results show that the electric field facilitated MCH dehydrogenation without methane and coke by-production over Pt/TiO2 catalyst.