Preparation of Solifenacin Succinate Functional Particles Embedded in a Gelling-Swelling Layer (PEGS) and Their Formulation in Orally Disintegrating Tablets.

The purpose of this research was firstly to prepare solifenacin succinate functional particles embedded in a gelling-swelling layer (PEGS) so as to achieve both taste-masking of the unpleasant taste of the drug and rapid drug elution, and secondly to incorporate these PEGS into orally disintegrating tablets (ODTs). In in vitro dissolution tests, initial drug release from the prepared PEGS could be suppressed to less than 1% after 2 min and increased to more than 85% after 30 min by adjusting the composition of the PEGS, in particular the thickness of the outer water-penetration control layer which contains a water-insoluble polymer. For the preparation of ODTs containing PEGS, a semi-direct compression method was adopted in order to prevent damage to the PEGS by processes such as granulation or compaction. The use of a fibre-shaped microcrystalline cellulose with poor fluidity improved the content uniformity of the ODTs, as the crystal fibres became entangled with the PEGS and other additives. The use of spherical mannitol with a hollow structure produced by spray drying imparted relatively high hardness and rapid disintegration properties to the final ODTs containing PEGS, which were tableted using a low compression force. There was no significant difference in the drug-release profiles of the optimally formulated ODTs containing PEGS tableted at different compression forces. The ODTs containing PEGS maintained a drug-release lag time sufficient for taste-masking of solifenacin succinate.

Preparation of Novel Functional Drug Particles Embedded in a Gelling-Swelling Layer (PEGS) for Taste Masking and Subsequent Rapid Drug Release.

The purpose of this research was to develop novel functional drug particles embedded in a gelling-swelling layer (PEGS) which are capable of achieving both taste-masking of unpalatable drugs and rapid drug elution. The functional particles had a three-layer structure consisting of a core drug layer, a gelling-swelling layer and an outer water-penetration control layer containing a water-insoluble polymer. The concept of formulation design was as follows: when water reaches the gelling-swelling layer, pulverized fine gelling-swelling particles gellate and swell from water absorption to form a rigid layer, thereby preventing drug release. After a defined lag time, the increased volume of the gelling-swelling layer breaks down the outer water-penetration control layer, leading to rapid drug release. In order to adapt this system for use in orally disintegrating tablets, PEGS were prepared at a size of about 250 µm using a fine particle-coating method. Ambroxol hydrochloride was used as a model drug for bitterness and the effects of different gelling-swelling agents and water-insoluble polymers on drug release characteristics from PEGS were examined. In in vitro dissolution tests, it was shown that the drug dissolution rate from PEGS could be suppressed to about 5% after 2 min and increased to more than 85% after 30 min by adjusting the composition and thickness of the outer layer. The PEGS expanded about 1.5-fold and the outer layer was ruptured after 5 min in water.

Formulation design for orally disintegrating tablets containing enteric-coated particles.

The purpose of this study was to investigate the applicability of our newly developed technology (RACTAB® technology) for preparing orally disintegrating tablets (ODTs) containing enteric-coated particles. Tamsulosin hydrochloride (TAM) was used as a model drug contained in the enteric-coated particles. Enteric-coated particles containing TAM (ECP-T) were prepared by spray coating a mixture of TAM with controlled-release materials. ECP-T was then mixed with rapidly disintegrating granules (RDGs), which were prepared using the suspension spray-coating method, and was tableted to form ODTs (ODTRAC). ODTRAC was evaluated for its hardness, thickness, internal structure (X-ray-CT scanning), functional properties (controlled-release profile), and in vivo disintegration time. Since RDGs with micronized ethylcellulose (MEC) increased tablet hardness by increasing the contact frequency between granules, ODTRAC containing ECP-T exhibited high hardness (>50 N) and low friability (<0.5%) with a relatively low compression force. After tableting, the structure of ECP-T in ODTRAC remained intact and no damage was observed on the surface. ECP-T recovered from ODTRAC showed the same dissolution profile of TAM in Japanese Pharmacopoeia (JP) 1st and JP 2nd media as that of intact ECP-T, which indicated that the tableting process did not affect the acid-resistibility of the particle. In addition, ODTRAC rapidly disintegrated in vivo (< 30 s), even at a high compression force (at 9 kN). These findings clearly suggest that RACTAB® technology is a useful approach to prepare ODTs containing enteric-coated particles.

Further improvement of orally disintegrating tablets using micronized ethylcellulose.

The aim of this study is to design a new orally disintegrating tablet (ODT) containing micronized ethylcellulose (MEC). The new ODT was prepared by physical mixing of rapidly disintegrating granules (RDGs) with MEC. To obtain RDGs, mannitol was spray-coated with a suspension of corn starch and crospovidone (9:1, w/w ratio) using a fluidized-bed granulator (suspension spray-coating method). The new ODTs were evaluated for their hardness, friability, thickness, internal structure (X-ray-CT scanning), in vivo disintegration time, and water absorption rate. Since MEC increases tablet hardness by increasing the contact frequency between the granules, the new ODTs could obtain high hardness (>50 N) and low friability (<0.5 %) with relatively low compression force. In addition, fine capillary channels formed in ODTs facilitated the wicking action and enabled rapid disintegration in vivo (<30 s). On the other hand, since MEC has low hygroscopicity, the tablet hardness of ODTs containing MEC remained high for 1 month in high-humidity conditions. In conclusion, the new ODTs containing MEC developed in this study possessed superior properties for clinical use and are expected to be applied for a wide range of functionally released drugs for bitter taste masking, sustained release, and controlled release (pH-dependent film coating, matrix, and microcapsule).

Development of novel sustained-release system, disintegration-controlled matrix tablet (DCMT) with solid dispersion granules of nilvadipine (II): in vivo evaluation.

A novel sustained-release (SR) system, disintegration-controlled matrix tablet (DCMT), was developed for poorly water-soluble drugs. DCMT, consisting of wax and solid dispersion (SD) granules containing a disintegrant, could control the release of nilvadipine (NiD), a model compound, by its disintegration. In the present study, two DCMTs (DCMT-1 and DCMT-2) with different release rates of NiD were orally administered to beagle dogs, and in vivo absorption of NiD from DCMTs was compared with that from immediate-release (IR) tablets. DCMTs successfully sustained the absorption of NiD longer than IR tablets, while they did not decrease the bioavailability of NiD. DCMT-2, providing the slower release of NiD than DCMT-1, prolonged the absorption longer than DCMT-1. In vivo absorption profiles of NiD from DCMTs were significantly correlated with in vitro release profiles, suggesting that the release property from DCMTs would maintain regardless of the change in physiological condition through the gastrointestinal tract. Furthermore, the food intake did not affect the absorption of NiD after oral administration of DCMT-2. The present results strongly indicate that the DCMT system would be a promising SR system, which could improve the solubility and sustain the absorption of poorly water-soluble drugs.

Development of novel sustained-release system, disintegration-controlled matrix tablet (DCMT) with solid dispersion granules of nilvadipine.

The goal of this study is to develop a novel sustained-release (SR) system for poorly water-soluble drugs by applying solid dispersion (SD) technique for improving the solubility. The developed SR system, disintegration-controlled matrix tablet (DCMT), consists of hydrogenated soybean oil (HSO) as wax and SD granules containing low-substituted hydroxypropylcellulose (L-HPC) as a disintegrant. In this study, nilvadipine (NiD) was chosen as a model compound. Sustained-release profiles of NiD from DCMT were identically controlled in several dissolution mediums in spite of varying pH and agitation speed. The release of NiD from DCMT was sustained more effectively by increasing the amount of wax or by decreasing the amount of disintegrant, and supersaturation of NiD was achieved without any re-crystallization in dissolution medium. The release rate of NiD from DCMT was controlled by the disintegration rate of tablet. The release profile of NiD was described by the Hixson-Crowell's model better than zero-order kinetics, first-order kinetics and Higuchi's model, which supports that the release of NiD from DCMT is regulated by the disintegration of the tablet. From this study, it was clarified that DCMT was one of the promising SR systems applying SD for the poorly water-soluble drugs.

Applicability of (SBE)7m-beta-CD in controlled-porosity osmotic pump tablets (OPTs).

The purpose of this study was to investigate the general application of a controlled-porosity osmotic pump tablet (OPT) utilizing (SBE)7m-beta-CD as both a solubilizer and an osmotic agent for drugs with varying physical properties. OPTs utilizing (SBE)7m-beta-CD were prepared for five poorly soluble and two highly water-soluble drugs. The Japanese Pharmacopoeia dissolution method was used to study the drug and (SBE)7m-beta-CD release from the OPTs. The drug concentration in the OPT core after the OPT was placed in the release medium for two hours was assayed gravimetrically and by HPLC. An appropriate composition ratio (ACR) of (SBE)7m-beta-CD to drug at which drug release from the OPT was complete and pH-independent within the physiological pH range of the GI tract was determined for each drug. The ACR values correlate to the drug concentration in the OPT core when the OPTs were placed in the release medium for two hours. The release profiles of prednisolone (a poorly water-soluble drug) and sodium chloride (a water-soluble compound) from the OPTs were almost the same as that of (SBE)7m-beta-CD. Also, the release rate of each drug per unit membrane surface area from the OPTs was similar, regardless of the differences in drug solubility. The present results confirmed that (SBE)7m-beta-CD serves as both a solubility modulator and as an osmotic pumping agent for OPTs, from which the release rate of both water-soluble and poorly water-soluble drugs can be controlled.

Establishment of new preparation method for solid dispersion formulation of tacrolimus.

The aim of this study was to establish a new preparation method for solid dispersion formulation (SDF) of tacrolimus, a poorly water-soluble drug, without dichloromethane, because no use of dichloromethane is recommended by ICH harmonized tripartite guideline. To select the appropriate carrier, three different SDFs with polyethylene glycol 6000 (PEG 6000), polyvinylpyrrolidone (PVP) and hydroxypropylmethylcellulose (HPMC) were prepared by the conventional solvent method, in which tacrolimus and the carrier were completely dissolved in the mixture of dichloromethane and ethanol. Powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC) patterns indicated that tacrolimus exists in an amorphous state in all three SDFs. The supersaturated dissolution profiles of tacrolimus were observed in all SDFs, and the highest level of supersaturation for tacrolimus was obtained and maintained for 24h from SDF with HPMC. On the other hand, the supersaturated level from SDF with PEG 6000 or PVP decreased rapidly. The in vivo oral absorption study in dogs showed that bioavailability of tacrolimus from SDF with HPMC was remarkably improved compared with the crystalline powder. It was clarified that HPMC is the most appropriate carrier for SDF of tacrolimus. Then, SDF of tacrolimus was prepared by the new method, which allows us to make SDF of tacrolimus by swelling HPMC with ethanol, in which tacrolimus was completely dissolved. This new method does not need dichloromethane. The physicochemical properties of SDF with HPMC prepared by the new method were the same as those of SDF prepared by the conventional solvent method. Furthermore, SDF with HPMC prepared by the new method was still stable after stored at 40 degrees C for 3 months. The pharmacokinetic parameters after oral administration in monkeys showed no significant difference (P>0.01) between SDFs with HPMC prepared by the two methods. In conclusion, we have established the new preparation method for SDF of tacrolimus with HPMC and the new method makes it possible to prepare SDF of tacroliumus without dichloromethane.