RNA Foci in Two bi-Allelic RFC1 Expansion Carriers.

Cerebellar ataxia, neuropathy, vestibular areflexia syndrome (CANVAS) is a late-onset, autosomal recessive neurodegenerative disorder caused by biallelic AAGGG/ACAGG repeat expansion (AAGGG-exp/ACAGG-exp) in RFC1. The recent identification of patients with CANVAS exhibiting compound heterozygosity for AAGGG-exp and truncating variants supports the loss-of-function of RFC1 in CANVAS patients. We investigated the pathological changes in 2 autopsied patients with CANVAS harboring biallelic ACAGG-exp and AAGGG-exp. RNA fluorescence in situ hybridization of the 2 patients revealed CCTGT- and CCCTT-containing RNA foci, respectively, in neuronal nuclei of tissues with neuronal loss. Our findings suggest that RNA toxicity may be involved in the pathogenesis of CANVAS. ANN NEUROL 2024;95:607-613.

Rapid and comprehensive diagnostic method for repeat expansion diseases using nanopore sequencing.

We developed a diagnostic method for repeat expansion diseases using a long-read sequencer to improve currently available, low throughput diagnostic methods. We employed the real-time target enrichment system of the nanopore GridION sequencer using the adaptive sampling option, in which software-based target assignment is available without prior sample enrichment, and built an analysis pipeline that prioritized the disease-causing loci. Twenty-two patients with various neurological and neuromuscular diseases, including 12 with genetically diagnosed repeat expansion diseases and 10 manifesting cerebellar ataxia, but without genetic diagnosis, were analyzed. We first sequenced the 12 molecularly diagnosed patients and accurately confirmed expanded repeats in all with uniform depth of coverage across the loci. Next, we applied our method and a conventional method to 10 molecularly undiagnosed patients. Our method corrected inaccurate diagnoses of two patients by the conventional method. Our method is superior to conventional diagnostic methods in terms of speed, accuracy, and comprehensiveness.

Patients with biallelic GGC repeat expansions in NOTCH2NLC exhibiting a typical neuronal intranuclear inclusion disease phenotype.

We report two patients with autosomal dominant neuronal intranuclear inclusion disease (NIID) harboring the biallelic GGC repeat expansion in NOTCH2NLC to uncover the impact of repeat expansion zygosity on the clinical phenotype. The zygosity of the entire NOTCH2NLC GGC repeat expansion and DNA methylation were comprehensively evaluated using fluorescent amplicon length PCR (AL-PCR), Southern blotting and targeted long-read sequencing, and detailed genetic/epigenetic and clinical features were described. In AL-PCR, we could not recognize the wild-type allele in both patients. Targeted long-read sequencing revealed that one patient harbored a homozygous repeat expansion. The other patient harbored compound heterozygous repeat expansions. The GGC repeats and the nearest CpG island were hypomethylated in all expanded alleles in both patients. Both patients harboring the biallelic GGC repeat expansion showed a typical dementia-dominant NIID phenotype. In conclusion, the biallelic GGC repeat expansion in two typical NIID patients indicated that NOTCH2NLC-related diseases could be completely dominant.

Repeat conformation heterogeneity in cerebellar ataxia, neuropathy, vestibular areflexia syndrome.

Cerebellar ataxia, neuropathy, vestibular areflexia syndrome (CANVAS) is a late-onset, slow-progressing multisystem neurodegenerative disorder. Biallelic AAGGG repeat expansion in RFC1 has been identified as causative of this disease, and repeat conformation heterogeneity (ACAGG repeat) was also recently implied. To molecularly characterize this disease in Japanese patients with adult-onset ataxia, we accumulated and screened 212 candidate families by an integrated approach consisting of flanking PCR, repeat-primed PCR, Southern blotting and long-read sequencing using Sequel II, GridION or PromethION. We identified 16 patients from 11 families, of whom seven had ACAGG expansions [(ACAGG)exp/(ACAGG)exp] (ACAGG homozygotes), two had ACAGG and AAGGG expansions [(ACAGG)exp/(AAGGG)exp] (ACAGG/AAGGG compound heterozygotes) and seven had AAGGG expansions [(AAGGG)exp/(AAGGG)exp] (AAGGG homozygotes). The overall detection rate was 5.2% (11/212 families including one family having two expansion genotypes). Long-read sequencers revealed the entire sequence of both AAGGG and ACAGG repeat expansions at the nucleotide level of resolution. Clinical assessment and neuropathology results suggested that patients with ACAGG expansions have similar clinical features to previously reported patients with homozygous AAGGG expansions, although motor neuron involvement was more notable in patients with ACAGG expansions (even if one allele was involved). Furthermore, a later age of onset and slower clinical progression were implied in patients with ACAGG/AAGGG compound heterozygous expansions compared with either ACAGG or AAGGG homozygotes in our very limited cohort. Our study clearly shows the occurrence of repeat conformation heterogeneity, with possible different impacts on the affected nervous systems. The difference in disease onset and progression between compound heterozygotes and homozygotes might also be suspected but with very limited certainty due to the small sample number of cases in our study. Studies of additional patients are needed to confirm this.

De novo CACNA1G variants in developmental delay and early-onset epileptic encephalopathies.

INTRODUCTION: Variants of CACNA1G, which encodes CaV3.1, have been reported to be associated with various neurological disorders. METHODS: Whole-exome sequencing of genomic DNA from 348 Japanese patients with neurodevelopmental disorders and their parents was conducted, and de novo variants of CACNA1G were extracted. The electrophysiological properties of each mutant channel were investigated by voltage-clamp and current-clamp analyses of HEK293T cells overexpressing these channels. RESULTS: Two patients diagnosed with Rett syndrome and West syndrome were found to have known pathological CACNA1G mutations reported in cerebellar ataxia cohorts: c.2881G > A, p.Ala961Thr and c.4591A > G, p.Met1531Val, respectively. One patient with Lennox-Gastaut syndrome was revealed to harbor a previously unreported heterozygous variant: c.3817A > T, p.Ile1273Phe. Clinical symptoms of the two patients with known mutations included severe developmental delay without acquisition of the ability to walk independently. The patient with a potentially novel mutation showed developmental delay, intractable seizures, and mild cerebral atrophy on MRI, but the severity of symptoms was milder than in the former two cases. Electrophysiological study using HEK293T cells demonstrated significant changes of T-type Ca2+ currents by p.Ala961Thr and p.Met1531Val SNVs, which were likely to enhance oscillation of membrane potential at low frequencies. In contrast, p.Ile1273Phe showed no significant effects in our electrophysiological evaluations, with its pathogenesis remaining undetermined. CONCLUSION: De novo variants of CACNA1G explain some neurodevelopmental disorders. Our study further provides information to understand the genotype-phenotype correlations of patients with CACNA1G mutations.

GGC Repeat Expansion of NOTCH2NLC in Adult Patients with Leukoencephalopathy.

Leukoencephalopathies comprise a broad spectrum of disorders, but the genetic background of adult leukoencephalopathies has rarely been assessed. In this study, we analyzed 101 Japanese patients with genetically unresolved adult leukoencephalopathy using whole-exome sequencing and repeat-primed polymerase chain reaction for detecting GGC expansion in NOTCH2NLC. NOTCH2NLC was recently identified as the cause of neuronal intranuclear inclusion disease. We found 12 patients with GGC expansion in NOTCH2NLC as the most frequent cause of adult leukoencephalopathy followed by NOTCH3 variants in our cohort. Furthermore, we found 1 case with de novo GGC expansion, which might explain the underlying pathogenesis of sporadic cases. ANN NEUROL 2019;86:962-968.

Ataxic phenotype with altered CaV3.1 channel property in a mouse model for spinocerebellar ataxia 42.

Spinocerebellar ataxia 42 (SCA42) is a neurodegenerative disorder recently shown to be caused by c.5144G > A (p.Arg1715His) mutation in CACNA1G, which encodes the T-type voltage-gated calcium channel CaV3.1. Here, we describe a large Japanese family with SCA42. Postmortem pathological examination revealed severe cerebellar degeneration with prominent Purkinje cell loss without ubiquitin accumulation in an SCA42 patient. To determine whether this mutation causes ataxic symptoms and neurodegeneration, we generated knock-in mice harboring c.5168G > A (p.Arg1723His) mutation in Cacna1g, corresponding to the mutation identified in the SCA42 family. Both heterozygous and homozygous mutants developed an ataxic phenotype from the age of 11-20 weeks and showed Purkinje cell loss at 50 weeks old. Degenerative change of Purkinje cells and atrophic thinning of the molecular layer were conspicuous in homozygous knock-in mice. Electrophysiological analysis of Purkinje cells using acute cerebellar slices from young mice showed that the point mutation altered the voltage dependence of CaV3.1 channel activation and reduced the rebound action potentials after hyperpolarization, although it did not significantly affect the basic properties of synaptic transmission onto Purkinje cells. Finally, we revealed that the resonance of membrane potential of neurons in the inferior olivary nucleus was decreased in knock-in mice, which indicates that p.Arg1723His CaV3.1 mutation affects climbing fiber signaling to Purkinje cells. Altogether, our study shows not only that a point mutation in CACNA1G causes an ataxic phenotype and Purkinje cell degeneration in a mouse model, but also that the electrophysiological abnormalities at an early stage of SCA42 precede Purkinje cell loss.

Chemical anchoring of lauryl methacrylate-based reversed phase monolith to 1/16″ o.d. polyetheretherketone tubing.

In this paper, we describe a method for the preparation of easy-to-use reversed-phase monolithic microbore columns. Polyetheretherketone (PEEK) tubing with an outer diameter of 1/16″ and an inner diameter of 1.0 mm was used as a column housing (empty column), and in it lauryl methacrylate (LMA) was copolymerized with ethylene dimethacrylate (EDMA). In order to chemically anchor the polymer monolith to the tube wall, the inner wall surface was pretreated by the following two-step procedure. (1) 50% sulfuric acid was filled into the PEEK tubing and left to stand for 6 h to generate sulfonate groups on the surface. (2) After washing with Milli-Q water, the sulfonated PEEK surface was brought into contact with 1 M glycidyl methacrylate in dichloromethane (or acetone) at 40°C for 4 h to introduce methacryloyl groups via the reaction of sulfonate groups and epoxy groups. Mechanical strength and column efficiency of the resulting monoliths were evaluated through the separation of a series of alkylbenzenes in acetonitrile-water (50:50, v/v) eluent over the flow rate range of 50-750 µL/min (corresponding to 1.7-25.5 mm/s). The poly(LMA-co-EDMA) monolith provided acceptable column efficiency of 2000 theoretical plates/10 cm (HETP value of 50 µm) for amylbenzene (separation factor k=40) and low flow resistance of 0.5 MPa/10 cm at a normal flow rate of 50 µL/min. The methacryloylated PEEK tubing tightly held the monolith, and the monolithic column exhibited good pressure resistance up to 15 MPa, allowing rapid separation at a 15-20 fold higher flow rate than normal.

Validation of the blurring of a small object on CT images calculated on the basis of three-dimensional spatial resolution.

We determine three-dimensional (3D) blurring of a small object on computed tomography (CT) images calculated on the basis of 3D spatial resolution. The images were characterized by point spread function (PSF), line spread function (LSF) and slice sensitivity profile (SSP). In advance, we systematically arranged expressions in the model for the imaging system to calculate 3D images under various conditions of spatial resolution. As a small object, we made a blood vessel phantom in which the direction of the vessel was not parallel to either the xy scan-plane or the z-axis perpendicular to the scan-plane. Therefore, when scanning the phantom, non-sharpness must be induced in all axes of the image. To predict the image blurring of the phantom, 3D spatial resolution is essential. The LSF and SSP were measured on our scanner, and two-dimensional (2D) PSF in the scan-plane was derived from the LSF by solving an integral equation. We obtained 3D images by convoluting the 3D object-function of the phantom with both 2D PSF and SSP, corresponding to the 3D convolution. Calculated images showed good agreement with scanned images. Our technique of determining 3D blurring offers an accuracy advantage in 3D shape (size) and density measurements of small objects.