Advanced Analysis to Distinguish between Physical Decrease and Inactivation of Viable Phages in Aerosol by Quantitating Phage-Specific Particles.

　Recent studies have investigated the efficacy of air-cleaning products against pathogens in the air. A standard method to evaluate the reduction in airborne viruses caused by an air cleaner has been established using a safe bacteriophage instead of pathogenic viruses; the reduction in airborne viruses is determined by counting the number of viable airborne phages by culture, after operating the air cleaner. The reduction in the number of viable airborne phages could be because of "physical decrease" or "inactivation". Therefore, to understand the mechanism of reduction correctly, an analysis is required to distinguish between physical decrease and inactivation. The purpose of this study was to design an analysis to distinguish between the physical decrease and inactivation of viable phi-X174 phages in aerosols. We established a suitable polymerase chain reaction (PCR) system by selecting an appropriate primer-probe set for PCR and validating the sensitivity, linearity, and specificity of the primer-probe set to robustly quantify phi-X174-specific airborne particles. Using this quantitative PCR system and culture assay, we performed a behavior analysis of the phage aerosol in a small chamber (1 m3) at different levels of humidity, as humidity is known to affect the number of viable airborne phages. The results revealed that the reduction in the number of viable airborne phages was caused not only by physical decrease but also by inactivation under particular levels of humidity. Our study could provide an advanced analysis to differentiate between the physical decrease and inactivation of viable airborne phages.

Femoral bone structure in Otsuka Long-Evans Tokushima Fatty rats.

OBJECTIVES: Type 2 diabetes mellitus (T2DM) increases fracture risk despite normal to high levels of bone mineral density. Bone quality is known to affect bone fragility in T2DM. The aim of this study was to clarify the trabecular bone microstructure and cortical bone geometry of the femur in T2DM model rats. METHODS: Five-week-old Otsuka Long-Evans Tokushima Fatty (OLETF; n = 5) and Long-Evans Tokushima Otsuka (LETO; n = 5) rats were used. At the age of 18 months, femurs were scanned with micro-computed tomography, and trabecular bone microstructure and cortical bone geometry were analyzed. RESULTS: Trabecular bone microstructure and cortical bone geometry deteriorated in the femur in OLETF rats. Compared with in LETO rats, in OLETF rats, bone volume fraction, trabecular number and connectivity density decreased, and trabecular space significantly increased. Moreover, in OLETF rats, cortical bone volume and section area decreased, and medullary volume significantly increased. CONCLUSIONS: Long-term T2DM leaded to deterioration in trabecular and cortical bone structure. Therefore, OLETF rats may serve as a useful animal model for investigating the relationship between T2DM and bone quality.

Development of a new technique using glass beads for dry dispersion of airborne fungal spores.

To evaluate the removal of airborne microbes by air cleaners, a technique for generating airborne fungal spores in the dry state in a test chamber (dry dispersion) become necessary. The Society of Indoor Environment Japan (SIEJ) published SIEJ Standard Method No. 20110001 (SIEJ standard),in which an aerial ultrasonic oscillator was used as the device for dry dispersion. However, a more versatile apparatus is also necessary from a practical point of view. Therefore, we developed a new device using glass beads for the dispersion. Glass beads and a fungal sheet containing spores of Wallemia sebi were set in a midget impinger, which was connected to a compressor and a compact test chamber (1 m(3)). Air was blown into the impinger from the compressor. The spores on the fungal sheet were released by impingement of the glass beads when the beads were induced to float by the air blown into the impinger, and the spores were introduced to the chamber by the airflow. This newly developed technique can be used in a compact chamber system and could be applicable as an improved method for generating airborne fungal spores in the dry state in the SIEJ standard.

[Distribution of Clostridium tetani in topsoil from Sagamihara, central Japan].

Despite reports of Clostridium tetani being isolated from soil in Kanazawa, Okinawa, and Tokyo, Japan, little has been studied about C. tetani distribution in other regions. We studied C. tetani in topsoil samples collected from private gardens, public road shoulders, a university campus, mountains, and fields in Sagamihara. C. tetani occurred in 8 of 35 soil samples (22.9%) and tetanus toxin in 7 of the 8 C. tetani-positive samples (87.5%). Contamination was clearly higher in soils from mountains near Tsukui-gun (Kanagawa Prefecture), Minamitsuru-gun, and Uenohara and Koshu cities (Yamanashi Prefecture) than in other regions. These findings suggest that tetanus toxin-producing strains of C. tetani tend to inhabit the topsoil of western Sagaminaha region, as a geographical feature.

[Inactivation of Cryptosporidium parvum oocysts in copper tubing].

We studied whether the infectivity of Cryptosporidium parvum oocysts for suckling mice could be inactivated by copper tubing or by other types of tubing used to construct water distribution systems, including stainless steel, rigid polyvinyl chloride (PVC), PVC-lined steel, polyethylene (PE), cross-linked PE, and polybutene (PB), using glass tubing as the control. Oocysts were incubated in each tubings for 24 hours. The extent of inactivation of infectious oocysts by copper tubing was -1.303 log, which significantly inactivated of infectivity. In contrast, other types of tubing had no significant effect on some oocyst infectivity, although PB did show a maximum inactivation of -0.313 log. 25% of oocysts showed degeneration morphologically after passing through copper tubing, while 0.3% to 1.8% showed degeneration after passing through other tubing. Significant inactivation of infectious oocysts was not caused by water in which copper tubing had been let stand for 24 hours, although it had a cupric ion (Cu2+) concentration of 2.4 mg/L. The direct contact of oocysts with copper surface resulted in a decrease in the recovery percentage of oocysts and generation of hydrogen peroxide (0.5 mg/L) after 24 h of incubation. The percentage of degenerating oocysts was 29%. Such cryptosporidicidal effects of the copper surface on oocysts were completely inhibited by overlaying the surface with a Millipore filter before adding oocysts and incubating oocysts in the presence of catalase, an antioxidant enzyme. These findings suggest that copper tubing inactivates infectious C. parvum oocysts cytotoxically which may be due to oxygen radicals generated by the interaction between Cu2+ and hydrogen peroxide on the tubing surface.

[Antimicrobial ceramic for killing Legionella pneumophila in hot spring waters].

Killing of Legionella pneumophila by an antimicrobial ceramic was evaluated during culture in nine kinds of hot spring water at 40 degrees C. After 24 hours, the efficacy against L. pneumophila varied, depended on water quality. The strongest antibacterial effect was seen in chloride hot spring water from Wakayama and in deionized water. In four hot spring water samples (sulfur and hydrogen carbonate springs from Fukushima, simple thermals from Mie, and radioactive spring from Tottori), the decrease was < -2 log cfu after 48 hours. These results suggest that the antimicrobial ceramic is able to eradicate Legionella from hot spring waters.

[Physicochemical factors influencing distribution of Legionella species in Japanese hot springs].

We examined the relationship between the distribution of Legionella bacteria and various physicochemical characteristics of hot springs in Japan. Legionella bacteria were isolated from 52 (49.5%) out of 105 water samples, particularly from outdoor hot springs (67.3%). The bacterial count in the water samples positive for Legionella (86.5%) ranged from 10(1) to < 10(3) cfu/100 mL. L. pneumophila serogroup (SG) 4 (27.8%) was predominant in the water samples, followed by SG 5 (12.2%). The pulsefield gel electrophoresis (PFGE) patterns of chromosomal DNA for L. pneumophila SG 4 isolated from different parts of a hot spring resort were identical. Isolation of Legionella species from hot spring waters did not occur at pH 1.8-3.3, SO4(2-): > 780 mg/L, and H2SiO3: > 146 mg/L. The hot water-recirculating systems were applied to 18 out of 20 (90%) hot spring facilities which were found positive for Legionella. These results indicate that Legionella species are widespread in hot springs throughout Japan, except for waters with a low pH and non-recirculating waters, and that a single strain of L. pneumophila SG 4 is predominant in a particular hot spring resort.