Osmoregulation by choline-based deep eutectic solvent induces electroactivity in Bacillus subtilis biofilms.

Gram-positive Bacillus subtilis is a model organism for the biotechnology industry and has recently been characterized as weakly electroactive in both planktonic cultures and biofilms. Increasing the extracellular electron transfer (EET) rate in B. subtilis biofilms will help to develop an efficient microbial electrochemical technology (MET) and improve the bioproduction of high-value metabolites under electrofermentative conditions. In our previous work, we have shown that the addition of compatible solute precursors such as choline chloride (ChCl) to the growth medium formulation increases current output and biofilm formation in B. subtilis. In this work, we utilized a low-carbon tryptone yeast extract medium with added salts to further expose B. subtilis to salt stress and observe the osmoregulatory and/or nutritional effects of a D-sorbitol/choline chloride (ChCl) (1:1 mol mol-1) deep eutectic solvents (DESs) on the electroactivity of the formed biofilm. The results show that ChCl and D-sorbitol alleviate the osmotic stress induced by the addition of NaH2PO4 and KH2PO4 salts and boost biofilm production. This is probably due to the osmoprotective effect of ChCl, a precursor of the osmoprotectant glycine betaine, and the induction of electroactive exopolymeric substances within the B. subtilis biofilm. Since high ionic strength media are commonly used in microbial biotechnology, the combination of ChCl-containing DESs and salt stress could enhance biofilm-based electrofermentation processes that bring significant benefits for biotechnological applications.

Electrofermentation increases concentration of poly γ-glutamic acid in Bacillus subtilis biofilms.

Fluctuations in redox conditions in bioprocesses can alter the end-products, reduce their concentration, and lengthen the process time. Electrofermentation enables rapid metabolic modulation of biosynthesis and allows control of redox imbalances in biofilm-based fermentation processes. In this study, electrofermentation is used to boost the production of the bacterial biopolymer poly-γ-glutamic acid (γ-PGA) from Bacillus subtilis ATCC 6051. When compared to control experiments (3.3 ± 0.99 g L-1 ), the application of an electrode potential E = 0.4 V versus Ag/AgCl results in a more than two-fold increase in the production of γ-PGA (9.13 ± 1.4 g L-1 ). Using an engineered B. subtilis strain, in which γ-PGA production is driven by isopropyl ß-d-1-thiogalactopyranoside, electrofermentation improves polymer concentrations from 15.4 ± 1.5 to 23.1 ± 1.6 versus g L-1 . These results confirm that electrofermentation conditions can be adopted to increase the concentration of γ-PGA and perhaps other extracellular biopolymers in industrial strains.

Molybdenum oxide nanotube caps decorated with ultrafine Ag nanoparticles: Synthesis and antimicrobial activity.

In the contemporary era, microorganisms, spanning bacteria and viruses, are increasingly acknowledged as emerging contaminants in the environment, presenting significant risks to public health. Nevertheless, conventional methods for disinfecting these microorganisms are often ineffective. Additionally, they come with disadvantages such as high energy usage, negative environmental consequences, increased expenses, and the generation of harmful byproducts. The development of next-generation antifungal and antibacterial agents is dependent on newly synthesized nanomaterials with inherent antimicrobial behavior. In this study, we report an arc-discharge method to synthesize MoOx nanosheets and microbelts, followed by decorating them with ultrafine Ag nanoparticles (NPs). Scanning and transmission electron microscopies show that Ag NPs formation on the Molybdenum oxide nanostructures rolls them into nanotube caps (NTCs), revealing inner and outer diameters of approximately 19.8 nm and 105.5 nm, respectively. Additionally, the Ag NPs are ultrafine, with sizes in the range of 5-8 nm. Results show that the prepared NTCs exhibit dose-dependent sensitivity to both planktonic and biofilm cells of Escherichia coli and Candida albicans. The anti-biofilm activity in terms of biofilm inhibition ranged from 19.7 to 77.2% and 11.3-82.3%, while removal of more than 70% and 90% of preformed biofilms was achieved for E. coli and C. albicans, respectively, showing good potential for antimicrobial coating. Initial MoOx exhibits positive potential, while Ag-decorated Molybdenum oxide NTCs show dual potential effects (positive for Molybdenum oxide NTCs and negative for Ag NPs. Molybdenum oxide NTCs, with their strong positive potential, efficiently attract microbes due to their negatively charged cell surfaces, facilitating the antimicrobial effect of Ag NPs, leading to cell damage and death. These findings suggest that the synthesized NPs could serve as a suitable coating for biomedical applications.

Biochemical and electrochemical characterization of biofilms formed on everolimus-eluting coronary stents.

Drug-eluting stents (DES) are mostly used in percutaneous coronary intervention, which is the main treatment for coronary artery occlusion. This procedure aims to restore the natural lumen, while minimizing the risk of restenosis. However, stent insertion increases the risk for infections, due to contamination of the device or insertion hub with normal skin flora. While coronary stent infection is a rare complication, it can be fatal. Currently, there is little information on biofilm formation on everolimus-eluting stents. Although everolimus is not designed as an antimicrobial agent, its antimicrobial activity should be investigated. In this study, biofilm formation on everolimus-eluting and bare metal stents (BMS) is characterized through biochemical and electrochemical methods. DES and BMS are inoculated with Pseudomonas aeruginosa and Staphylococcus epidermidis, both independently and in co-culture. Biofilms formed on DES were 49.6 %, 12.9 % and 47.5 % higher than on BMS for P. aeruginosa, S. epidermidis and their co-culture, respectively. Further, the charge output for DES was 18.9 % and 59.7 % higher than BMS for P. aeruginosa and its co-culture with S. epidermidis, respectively. This observation is most likely due to higher surface roughness of DES, which favors biofilm formation. This work shows that bioelectrochemical methods can be used for rapid detection of biofilms on drug-eluting and bare metal stents, which may find application in quality assessment of stents and in characterization of stents removed after polymicrobial infections.

Assessment of physiological and electrochemical effects of a repurposed zinc dithiocarbamate complex on Acinetobacter baumannii biofilms.

Acinetobacter baumannii is an infectious agent of global proportion and concern, partly due to its proficiency in development of antibiotic resistance phenotypes and biofilm formation. Dithiocarbamates (DTC) have been identified as possible alternatives to the current antimicrobials. We report here the evaluation of several DTC-metal complexes against A. baumannii planktonic cells and biofilms. Among the DTC-metal complexes and DTCs tested, ZnL1 (N-methyl-1-phenyldithiocarbamato-S,S' Zn(II)), originally designed as an antitumor agent, is effective against biofilm forming A. baumannii. A MIC value of 12.5 µM, comparable to that of Gentamicin (5 µM) was measured for planktonic cells in tryptic soy broth. Spectroscopy, microscopy and biochemical analyses reveal cell membrane degradation and leakage after treatment with ZnL1. Bioelectrochemical analyses show that ZnL1 reduces biofilm formation and decreases extracellular respiration of pre-formed biofilms, as corroborated by microscopic analyses. Due to the affinity of Zn to cells and the metal chelating nature of L1 ligand, we hypothesize ZnL1 could alter metalloprotein functions in the membranes of A. baumannii cells, leading to altered redox balance. Results indicate that the DTC-Zn metal complex is an effective antimicrobial agent against early A. baumannii biofilms under laboratory conditions.

Electroactivity of weak electricigen Bacillus subtilis biofilms in solution containing deep eutectic solvent components.

Bacillus subtilis is a Gram-positive, spore-forming bacterium with a versatile and adaptable metabolism, which makes it a viable cell factory for microbial production. Electroactivity has recently been identified as a cellular characteristic linked with the metabolic activity of B. subtilis. The enhancement of B. subtilis electroactivity can positively enhance bioproduction of high-added value metabolites under electrofermentative conditions. Here, we explored the use of deep eutectic solvents (DESs) and DES components as biocompatible nutrient additives for enhancing electroactivity of B. subtilis. The strongest electroactivity was obtained in an aqueous choline chloride: glycerol (1:2 mol mol-1) eutectic mixture. At low concentration (50-500 mM), this mixture induced a pseudo-diauxic increase in planktonic growth and increased biofilm formation, likely due to a nutritional and osmoprotectant effect. Similarities in electroactivity enhancements of choline chloride-based eutectic mixtures and quinone redox metabolism in B. subtilis were detected using high performance liquid chromatography and differential pulse voltammetry. Results show that choline chloride-based aqueous eutectic mixtures can enhance biomass and productivity in biofilm-based electrofermentation. However, the specific mechanism needs to be fully elucidated.

Dinuclear silver(i) complexes with a pyridine-based macrocyclic type of ligand as antimicrobial agents against clinically relevant species: the influence of the counteranion on the structure diversification of the complexes.

New dinuclear silver(i) complexes with N,N',N'',N'''-tetrakis(2-pyridylmethyl)-1,4,8,11-tetraazacyclotetradecane (tpmc), [Ag2(NO3)(tpmc)]NO3·1.7H2O (1), [Ag2(CF3SO3)2(tpmc)] (2), and [Ag2(tpmc)](BF4)2 (3) were synthesized and characterized by NMR (1H and 13C), IR and UV-Vis spectroscopy, cyclic voltammetry and molar conductivity measurements. The molecular structures of the complexes were determined by single-crystal X-ray diffraction analysis. The spectroscopic and crystallographic data showed that the structure of the complexes strongly depends on the nature of the counteranion of silver(i) salt used for their synthesis. The antimicrobial activity of complexes 1-3 was examined against Gram-positive and Gram-negative bacteria and different species of unicellular fungus Candida spp. The ability of these complexes to inhibit the formation of Candida biofilms and to eradicate the already formed biofilms was tested in the standard microtiter plate-based assay. In addition, a bioelectrochemical testing of the antimicrobial activity of complex 1 against early biofilm was also performed. The obtained results indicated that complexes 1-3 showed increased activity toward Gram-negative bacteria and Candida spp. and could inhibit the formation of biofilms. In most cases, these complexes had positive selectivity indices and showed similar or even better activity with respect to the clinically used silver(i) sulfadiazine (AgSD). The values of the binding constants for complexes 1-3 to bovine serum albumin (BSA) were found to be high enough to indicate their binding to this biomolecule, but not so high as to prevent their release upon arrival at the target site. Moreover, the positive values of partition coefficients for these complexes indicated their ability to be transported through the cell membrane. Once inside the cell, complexes 1-3 could induce the formation of the reactive oxygen species (ROS) in C. albicans cells and/or interact with DNA. Taken together, silver(i) complexes with the tpmc ligand could be considered as novel antimicrobial compounds with favourable pharmacological properties, being safer than AgSD.