RESUMO
The lack of oxygen (O2) causes changes in the cell functioning. Modeling hypoxic conditions in vitro is challenging given that different cell types exhibit different sensitivities to tissue O2 levels. We present an effective in vivo platform for assessing various tissue and organ parameters in Danio rerio larvae under acute hypoxic conditions. Our system allows simultaneous positioning of multiple individuals within a chamber where O2 level in the water can be precisely and promptly regulated, all while conducting microscopy. We applied this approach in combination with a genetically encoded pH-biosensor SypHer3s and a highly H2O2-sensitive Hyper7 biosensor. Hypoxia causes H2O2 production in areas of brain, heart and skeletal muscles, exclusively in the mitochondrial matrix; it is noteworthy that H2O2 does not penetrate into the cytosol and is neutralized in the matrix upon reoxygenation. Hypoxia causes pronounced tissue acidosis, expressed by a decrease in pH by 0.4-0.6 units everywhere. Using imaging photoplethysmography, we measured in D.rerio fry real-time heart rate decrease under conditions of hypoxia and subsequent reoxygenation. Our observations in this experimental system lead to the hypothesis that mitochondria are the only source of H2O2 in cells of D.rerio under hypoxia.
RESUMO
Maxillofacial defects, arising from trauma, oncological disease or congenital abnormalities, detrimentally affect daily life. Prosthetic repair offers the aesthetic and functional reconstruction with the help of materials mimicking natural tissues. 3D polymer printing enables the design of patient-specific prostheses with high structural complexity, as well as rapid and low-cost fabrication on-demand. However, 3D printing for prosthetics is still in the early stage of development and faces various challenges for widespread use. This is because the most suitable polymers for maxillofacial restoration are soft materials that do not have the required printability, mechanical strength of the printed parts, as well as functionality. This review focuses on the challenges and opportunities of 3D printing techniques for production of polymer maxillofacial prostheses using computer-aided design and modeling software. Review discusses the widely used polymers, as well as their blends and composites, which meet the most important assessment criteria, such as the physicochemical, biological, aesthetic properties and processability in 3D printing. In addition, strategies for improving the polymer properties, such as their printability, mechanical strength, and their ability to print multimaterial and architectural structures are highlighted. The current state of the prosthetic retention system is presented with a focus on actively used polymer adhesives and the recently implemented prosthesis-supporting osseointegrated implants, with an emphasis on their creation from 3D-printed polymers. The successful prosthetics is discussed in terms of the specificity of polymer materials at the restoration site. The approaches and technological prospects are also explored through the examples of the nasal, auricle and ocular prostheses, ranging from prototypes to end-use products.
Assuntos
Prótese Maxilofacial , Polímeros , Impressão Tridimensional , Humanos , Polímeros/química , Desenho de Prótese , Desenho Assistido por Computador , Animais , Retenção da Prótese/métodosRESUMO
BACKGROUND: Owing to improvement of the molecular diagnostic methods using purified preparations of nucleic acids (NAs), the development of effective methods providing the isolation of DNA is still relevant. The sorption properties of magnetic multi-walled carbon nanotubes (MWCNTs), oxidized MWCNTs and MWCNTs (pristine and oxidized) modified with polydiallyldimethylammonium chloride (pDADMAC) with respect to double strained DNA have been studied. RESULTS: It was shown that in the presence of MWCNTs/pDADMAC particles the DNA molecules were reversibly retained by the particle's surface. The optimal conditions for each step of DNA extraction from model solutions using the obtained material were selected. A comparative evaluation of the effectiveness of the proposed method for DNA isolation based on the results of spectrophotometry and real-time PCR was carried out. It was shown that the desorbed DNA was efficiently amplified in PCR, inhibition of polymerase did not occurred. Probable mechanisms of DNA retention due to the influence of residual impurities of catalysts in the MWCNT composition, as well as the surface charge of nanotubes are proposed. CONCLUSION: Sequentially oxidized and coated with pDADMAC magnetically susceptible CNTs are seemed to be a promising material for development of low-cost systems proving an easy isolation, storage, and subsequent use of dsDNA in molecular diagnostics. The sorption properties of such systems are determined with highly developed specific surface area and their chemical composition.
Assuntos
Nanotubos de Carbono , Polietilenos , Compostos de Amônio Quaternário , Nanotubos de Carbono/química , Adsorção , DNA , Fenômenos MagnéticosRESUMO
Biomolecular corona is the major obstacle to the clinical translation of nanomedicines. Since corona formation is governed by molecular interactions at the nano-bio interface, nanoparticle surface properties such as topography, charge and surface chemistry can be tuned to manipulate biomolecular corona formation. To this end, as the first step towards a deep understanding of the processes of corona formation, it is necessary to develop nanoparticles employing various biocompatible materials and characterize their surface structure and dynamics at the molecular level. In this work, we applied molecular dynamics simulation to study the surface structure of organic core-shell nanoparticles formed by the self-assembly of synthetic molecules composed of a DOPE lipid, a carboxymethylglycine spacer and biotin. Lipid moieties form the hydrophobic core, spacer motifs serve as a hydrophilic shell and biotin residues function as a targeting ligand. By mixing such function-spacer-lipid, spacer-lipid and lipid-only constructs at various molar ratios, densities of the ligand and spacer on the nanoparticle surface were modified. For convenient analysis of the structure and dynamics of all regions of the nanoparticle surface, we compiled topography maps based on atomic coordinates. It was shown that an increase in the density of the shell does not reduce exposure of the core, but increases shell average thickness. Biotin, due to its alkyl valeric acid chain and spacer flexibility, is localized primarily near the hydrophobic core and its partial presentation on the surface occurs only in nanoparticles with higher ligand densities. However, an increase in biotin density leads to its clustering. In turn, ligand clustering diminishes the stealth properties of the shell and targeting efficiency. Based on nanoparticle surface structures, we determined the optimal density of biotin. Experimental studies reported in the literature confirm these conclusions. We also suggest design tips to achieve the preferred biotin presentation. Simulation results are consistent with the synchrotron SAXS profile. We believe that such studies will contribute to a better understanding of nano-bio interactions towards the rational design of efficient drug delivery systems.
Assuntos
Biotina , Nanopartículas , Ligantes , Espalhamento a Baixo Ângulo , Difração de Raios X , Nanopartículas/química , LipídeosRESUMO
It is generally accepted that oxidative stress plays a key role in the development of ischemia-reperfusion injury in ischemic heart disease. However, the mechanisms how reactive oxygen species trigger cellular damage are not fully understood. Our study investigates redox state and highly reactive substances within neonatal and adult cardiomyocytes under hypoxia conditions. We have found that hypoxia induced an increase in H2O2 production in adult cardiomyocytes, while neonatal cardiomyocytes experienced a decrease in H2O2 levels. This finding correlates with our observation of the difference between the electron transport chain (ETC) properties and mitochondria amount in adult and neonatal cells. We demonstrated that in adult cardiomyocytes hypoxia caused the significant increase in the ETC loading with electrons compared to normoxia. On the contrary, in neonatal cardiomyocytes ETC loading with electrons was similar under both normoxic and hypoxic conditions that could be due to ETC non-functional state and the absence of the electrons transfer to O2 under normoxia. In addition to the variations in H2O2 production, we also noted consistent pH dynamics under hypoxic conditions. Notably, the pH levels exhibited a similar decrease in both cell types, thus, acidosis is a more universal cellular response to hypoxia. We also demonstrated that the amount of mitochondria and the levels of cardiac isoforms of troponin I, troponin T, myoglobin and GAPDH were significantly higher in adult cardiomyocytes compared to neonatal ones. Remarkably, we found out that under hypoxia, the levels of cardiac isoforms of troponin T, myoglobin, and GAPDH were elevated in adult cardiomyocytes, while their level in neonatal cells remained unchanged. Obtained data contribute to the understanding of the mechanisms of neonatal cardiomyocytes' resistance to hypoxia and the ability to maintain the metabolic homeostasis in contrast to adult ones.
Assuntos
Peróxido de Hidrogênio , Miócitos Cardíacos , Ratos , Animais , Miócitos Cardíacos/metabolismo , Peróxido de Hidrogênio/metabolismo , Mioglobina , Troponina T/metabolismo , Hipóxia Celular , Hipóxia/metabolismo , Oxirredução , Isoformas de Proteínas/metabolismoRESUMO
Diabetes is one of the significant risk factors for ischemic stroke. Hyperglycemia exacerbates the pathogenesis of stroke, leading to more extensive cerebral damage and, as a result, to more severe consequences. However, the mechanism whereby the hyperglycemic status in diabetes affects biochemical processes during the development of ischemic injury is still not fully understood. In the present work, we record for the first time the real-time dynamics of H2O2 in the matrix of neuronal mitochondria in vitro in culture and in vivo in the brain tissues of rats during development of ischemic stroke under conditions of hyperglycemia and normal glucose levels. To accomplish this, we used a highly sensitive HyPer7 biosensor and a fiber-optic interface technology. We demonstrated that a high glycemic status does not affect the generation of H2O2 in the tissues of the ischemic core, while significantly exacerbating the consequences of pathogenesis. For the first time using Raman microspectroscopy approach, we have shown how a sharp increase in the blood glucose level increases the relative amount of reduced cytochromes in the mitochondrial electron transport chain in neurons under normal conditions in awake mice.
Assuntos
Isquemia Encefálica , Diabetes Mellitus , Hiperglicemia , AVC Isquêmico , Acidente Vascular Cerebral , Ratos , Camundongos , Animais , Peróxido de Hidrogênio , Acidente Vascular Cerebral/patologia , Hiperglicemia/patologia , Isquemia Encefálica/patologiaRESUMO
The emission of nanoscale particles from the surfaces of dental implants leads to the cumulative effect of particle complexes in the bone bed and surrounding soft tissues. Aspects of particle migration with the possibility of their involvement in the development of pathological processes of systemic nature remain unexplored. The aim of this work was to study protein production during the interaction of immunocompetent cells with nanoscale metal particles obtained from the surfaces of dental implants in the supernatants. The ability to migrate nanoscale metal particles with possible involvement in the formation of pathological structures, in particular in the formation of gallstones, was also investigated. The following methods were used: microbiological studies, X-ray microtomography, X-ray fluorescence analysis, flow cytometry, electron microscopy, dynamic light scattering, and multiplex immunofluorescence analysis. For the first time, titanium nanoparticles in gallstones were identified by X-ray fluorescence analysis and electron microscopy with elemental mapping. The multiplex analysis method revealed that the physiological response of the immune system cells, in particular neutrophils, to nanosized metal particles significantly reduced TNF-a production both through direct interaction and through double lipopolysaccharide-induced signaling. For the first time, a significant decrease in TNF-a production was demonstrated when supernatants containing nanoscale metal particles were co-cultured with proinflammatory peritoneal exudate obtained from the peritoneum of the C57Bl/6J inbred mice line for one day.
Assuntos
Implantes Dentários , Cálculos Biliares , Nanopartículas , Camundongos , Animais , Propriedades de Superfície , Osseointegração , Titânio/química , Microscopia Eletrônica de VarreduraRESUMO
The role of metallic nano- and microparticles in the development of inflammation has not yet been investigated. Soft tissue biopsy specimens of the bone bed taken during surgical revisions, as well as supernatants obtained from the surface of the orthopedic structures and dental implants (control), were examined. Investigations were performed using X-ray microtomography, X-ray fluorescence analysis, and scanning electron microscopy. Histological studies of the bone bed tissues were performed. Nanoscale and microscale metallic particles were identified as participants in the inflammatory process in tissues. Supernatants containing nanoscale particles were obtained from the surfaces of 20 units of new dental implants. Early and late apoptosis and necrosis of immunocompetent cells after co-culture and induction by lipopolysaccharide and human venous blood serum were studied in an experiment with staging on the THP-1 (human monocytic) cell line using visualizing cytometry. As a result, it was found that nano- and microparticles emitted from the surface of the oxide layer of medical devices impregnated soft tissue biopsy specimens. By using different methods to analyze the cell-molecule interactions of nano- and microparticles both from a clinical perspective and an experimental research perspective, the possibility of forming a chronic immunopathological endogenous inflammatory process with an autoimmune component in the tissues was revealed.
Assuntos
Implantes Dentários , Humanos , Microscopia Eletrônica de Varredura , Monócitos , Linhagem Celular , Titânio/análise , Propriedades de SuperfícieRESUMO
Acinetobacter baumannii is an antibiotic-resistant opportunistic pathogen, one of the main causes of hospital infections. There is an urgent need for the development of therapy strategies which are not based on antibiotics. Hybridoma technology was used to obtain monoclonal antibodies. The antibodies were characterized by enzyme immunoassay and fluorescence microscopy according to their ability to opsonize A. baumannii and to protect model animals from infection upon intraperitoneal and pulmonary injection. Monoclonal antibodies (MAbs), IgG, against the K9 capsular polysaccharide (CPS) of A. baumannii were prepared using a glycoconjugate, synthesized by squaric-acid chemistry, consisting of two CPS K9 monomer units and a carrier protein. The MAbs were highly specific, stained the bacterial surface, allowed detection of A. baumannii in infected lung tissue, effectively opsonized the bacteria at nanogram concentrations (up to 1.5 ng/mL for CPS-407), and demonstrated a high ability to protect an organism against bacterial infection upon intraperitoneal and lung injection. In intraperitoneal infection of a mouse model with A. baumannii K9, the CPS-407 antibody protected at a dose of 25 µg/mouse. When bacteria were injected into the lung, MAb therapy prevented infection of the body and led to a significant reduction of the bacterial load in infected tissues. IMPORTANCE MAbs detected A. baumannii in infected lung tissue, effectively opsonized bacteria, and protected model animals from infection.
Assuntos
Acinetobacter baumannii , Sepse , Camundongos , Animais , Anticorpos Monoclonais , Antibacterianos/farmacologia , Polissacarídeos/metabolismo , Sepse/microbiologiaRESUMO
The purpose of this study was to provide an immuno-mediated substantiation of the etiopathogenesis of mucositis and peri-implantitis based on the results of experimental, laboratory and clinical studies. The biopsy material was studied to identify impregnated nanoscale and microscale particles in the structure of pathological tissues by using X-ray microtomography and X-ray fluorescence analyses. Electron microscopy with energy-dispersive analysis identified the composition of supernatants containing nanoscale metal particles obtained from the surfaces of dental implants. The parameters of the nanoscale particles were determined by dynamic light scattering. Flow cytometry was used to study the effect of nanoscale particles on the ability to induce the activation and apoptosis of immunocompetent cells depending on the particles' concentrations during cultivation with the monocytic cell line THP-1 with the addition of inductors. An analysis of the laboratory results suggested the presence of dose-dependent activation, as well as early and late apoptosis of the immunocompetent cells. Activation and early and late apoptosis of a monocytic cell line when THP-1 was co-cultured with nanoscale metal particles in supernatants were shown for the first time. When human venous blood plasma was added, both activation and early and late apoptosis had a dose-dependent effect and differed from those of the control groups.
Assuntos
Implantes Dentários , Mucosite , Peri-Implantite , Humanos , Peri-Implantite/metabolismo , InflamaçãoRESUMO
Today, fluorescent diagnostics and photodynamic therapy are promising methods for diagnosing and treating oncological diseases. The development of new photosensitizers (PS) is one of the most important tasks to improve the efficiency of both laser-induced diagnostics and therapy. In our study, we conjugated PS with AIS/ZnS triple quantum dots (QDs) to obtain non-aggregated complexes. It was shown that the conjugation of PS with QDs does not change the PS fluorescence lifetime, which is a marker of the preservation of PS photophysical properties. In particular, efficient resonant Förster energy transfer (FRET), from QDs to PS molecules in the conjugate, increases the PS luminescence response. The FRET from QD to PS molecules with different ratios of donor and acceptors are shown. It has been demonstrated that the average efficiency of FRET depends on the ratio of PS and QD and reaches a maximum value of 80% at a ratio of 6 PS molecules per 1 QD molecule. Thus, these studies could help to contribute to the development of new complexes based on QD and PS to improve the efficiency of phototheranostics.
RESUMO
Staphylococcus aureus is a common human and animal pathogen. These bacteria have various pathogenicity factors, including enterotoxin-like proteins. SElP (staphylococcal enterotoxin-like protein P) has potential zinc ion-binding sites and is able to interact with major histocompatibility complex class II (MHCII) and T-cell receptor (TCR). A method for the expression and isolation of the enterotoxin-like protein of Staphylococcus aureus (SElP) was developed. The expression was carried out in E. coli cells, and the protein was isolated by affinity chromatography on a NiNTA column. The endotoxins were separated by affinity chromatography on Affi-Prep® polymyxin. It was shown by gel filtration that the resulting protein had a monomeric form. The protein in zinc-bound and zinc-free forms was characterized by protein melting using fluorescence method and it was shown that zinc stabilizes the spatial structure of SElP. The functional activity of SElP was investigated by the ability to interact with the histocompatibility antigen class II receptor (MHC-II) exposed on the B cell line Raji by flow cytofluorometry. The zinc-bound and zinc-free forms were shown to differ in their interaction with MHC-II. The localization of the zinc-binding site was confirmed by the introduction of the H225 and D227 mutations. The mutant protein was characterized by melting, and its propensity to form aggregates was shown.
Assuntos
Enterotoxinas , Superantígenos , Sequência de Aminoácidos , Animais , Sítios de Ligação , Enterotoxinas/genética , Escherichia coli/genética , Escherichia coli/metabolismo , Antígenos de Histocompatibilidade Classe II/química , Íons , Receptores de Antígenos de Linfócitos T , Staphylococcus aureus/metabolismo , Superantígenos/genética , Superantígenos/metabolismo , Zinco/químicaRESUMO
OBJECTIVES: To study the oxide layer stability of certified dental implants of system "P", made based on TiO2 alloy with carbon coating. To perform a comparative statistical analysis of the obtained data with the available data for the dental implants of systems "A" and "B". METHODS: X-ray microtomography and X-ray fluorescence analysis were used to study soft tissue biopsy specimens. Supernatants were studied by dynamic light scattering and transmission electron microscopy when simulating free emission of nanoscale metal oxide particles from the surface of dental implants as well as when simulating physical loading. A comparative analysis of three parameters of nanoscale particles was performed by statistical data analysis. The surface of the "P" system dental implant with surface treatment was analyzed by scanning electron microscopy. RESULTS: Both free emission of nanoscale oxide layer particles and yield of nano- and microscale particles during simulation of physical load were confirmed. Statistically significant differences were noted in a comparative analysis of the size and frequency of occurrence of these particles in the supernatants obtained from the surfaces of three dental implant systems. The elemental composition of the particles and the composition and structure of the "P" system dental implants themselves were analyzed. SIGNIFICANCE: The developed method of dynamic light scattering can be used to compare the stability of the oxide layer of standardized medical products manufactured on the basis of the TiO2 alloy.
Assuntos
Implantes Dentários , Ligas , Microscopia Eletrônica de Varredura , Óxidos , Propriedades de Superfície , Titânio/químicaRESUMO
Multiple studies have demonstrated that various nanoparticles (NPs) stimulate osteogenic differentiation of mesenchymal stem cells (MSCs) and inhibit adipogenic ones. The mechanisms of these effects are not determined. The aim of this paper was to estimate Wharton's Jelly MSCs phenotype and humoral factor production during tri-lineage differentiation per se and in the presence of silicon-gold NPs. Silicon (SiNPs), gold (AuNPs), and 10% Au-doped Si nanoparticles (SiAuNPs) were synthesized by laser ablation, characterized, and studied in MSC cultures before and during differentiation. Humoral factor production (n = 41) was analyzed by Luminex technology. NPs were nontoxic, did not induce ROS production, and stimulated G-CSF, GM-CSF, VEGF, CXCL1 (GRO) production in four day MSC cultures. During MSC differentiation, all NPs stimulated CD13 and CD90 expression in osteogenic cultures. MSC differentiation resulted in a decrease in multiple humoral factor production to day 14 of incubation. NPs did not significantly affect the production in chondrogenic cultures and stimulated it in both osteogenic and adipogenic ones. The major difference in the protein production between osteogenic and adipogenic MSC cultures in the presence of NPs was VEGF level, which was unaffected in osteogenic cells and 4-9 times increased in adipogenic ones. The effects of NPs decreased in a row AuNPs > SiAuNPs > SiNPs. Taken collectively, high expression of CD13 and CD90 by MSCs and critical level of VEGF production can, at least, partially explain the stimulatory effect of NPs on MSC osteogenic differentiation.
Assuntos
Diferenciação Celular/efeitos dos fármacos , Ouro/farmacologia , Nanopartículas Metálicas/administração & dosagem , Secretoma/efeitos dos fármacos , Silício/farmacologia , Geleia de Wharton/efeitos dos fármacos , Adipogenia/efeitos dos fármacos , Animais , Antígenos CD13/metabolismo , Condrogênese/efeitos dos fármacos , Feminino , Humanos , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/metabolismo , Fenótipo , Secretoma/metabolismo , Antígenos Thy-1/metabolismo , Fator A de Crescimento do Endotélio Vascular/metabolismo , Geleia de Wharton/metabolismoRESUMO
Titania nanoparticle/CdSe quantum dot hybrid structures are a promising bactericidal coating that exhibits a pronounced effect against light-sensitive bacteria. Here, we report the results of a comprehensive study of the photophysical properties and bactericidal functionality of these hybrid structures on various bacterial strains. We found that our structures provide the efficient generation of superoxide anions under the action of visible light due to electron transfer from QDs to titania nanoparticles with ~60% efficiency. We also tested the antibacterial activity of hybrid structures on five strains of bacteria. The formed structures combined with visible light irradiation effectively inhibit the growth of Escherichia coli, Bacillus subtilis, and Mycobacterium smegmatis bacteria, the last of which is a photosensitive causative agent model of tuberculosis.
RESUMO
One-dimensional (1D) necklace-like assembly of inorganic nanoparticles exhibits unique collective properties, which are critical to open up new and remarkable opportunities in the field of nanotechnology. This review focuses on the recent advances in the production of these types of assemblies employing two strategies: colloidal synthesis and self-assembly procedures. After a brief description of the forces guiding nanoparticles towards the assembly, the main features of both strategies are discussed. Examples of approaches, typically involved in colloidal synthesis, are highlighted. The peculiar properties of 1D nanostructures are strictly associated with the nanoparticle arrangement in the form of highly ordered assemblies, which are attained during the synthesis both in the solution and using a template, as well as under the action of an external force. The various 1D necklace-like structures, created through nanoparticle self-assembly, demonstrate aligned, oriented nanoparticle organization. Diverse nature, size and shape of preformed particles as building blocks, along with utilizing different linkers, templates or external field lead to fabrication of 1D chain nanostructures with properties responsible for their wide applications. The unique structure-property relationship, both in colloidal synthesis, and self-assembly, offers broad spectrum of 1D necklace-like nanostructure implementations, illustrated by their use in photonics, electronics, electrocatalysis, magnetics.
RESUMO
Nanoparticles based on the biocompatible amphiphilic poly(N-vinylpyrrolidone) (Amph-PVP) derivatives are promising for drug delivery. Amph-PVPs self-aggregate in aqueous solutions with the formation of micellar nanoscaled structures. Amph-PVP nanoparticles are able to immobilize therapeutic molecules under mild conditions. As is well known, many efforts have been made to exploit the DR5-dependent apoptosis induction for cancer treatment. The aim of the study was to fabricate Amph-PVP-based nanoparticles covalently conjugated with antitumor DR5-specific TRAIL (Tumor necrosis factor-related apoptosis-inducing ligand) variant DR5-B and to evaluate their in vitro cytotoxicity in 3D tumor spheroids. The Amph-PVP nanoparticles were obtained from a 1:1 mixture of unmodified and maleimide-modified polymeric chains, while DR5-B protein was modified by cysteine residue at the N-end for covalent conjugation with Amph-PVP. The nanoparticles were found to enhance cytotoxicity effects compared to those of free DR5-B in both 2D (monolayer culture) and 3D (tumor spheroids) in vitro models. The cytotoxicity of the nanoparticles was investigated in human cell lines, namely breast adenocarcinoma MCF-7 and colorectal carcinomas HCT116 and HT29. Notably, DR5-B conjugation with Amph-PVP nanoparticles sensitized resistant multicellular tumor spheroids from MCF-7 and HT29 cells. Taking into account the nanoparticles loading ability with a wide range of low-molecular-weight antitumor chemotherapeutics into hydrophobic core and feasibility of conjugation with hydrophilic therapeutic molecules by click chemistry, we suggest further development to obtain a versatile system for targeted drug delivery into tumor cells.
RESUMO
Low-frequency hysteresis loops and specific absorption rate (SAR) of various assemblies of elongated spheroidal magnetite nanoparticles have been calculated for a range of particle semiaxis ratios a/b = 1.0-3.0. The SAR of a dilute randomly oriented assembly of magnetite nanoparticles in an alternating magnetic field of moderate frequency, f = 300 kHz, and amplitude H 0 = 100-200 Oe is shown to decrease significantly with an increase in the aspect ratio of nanoparticles. In addition, there is a narrowing and shift of the intervals of optimal particle diameters towards smaller particle sizes. However, the orientation of a dilute assembly of elongated nanoparticles in a magnetic field leads to an almost twofold increase in SAR at the same frequency and amplitude of the alternating magnetic field, the range of optimal particle diameters remaining unchanged. The effect of the magneto-dipole interaction on the SAR of a dilute assembly of oriented clusters of elongated magnetite nanoparticles has also been investigated depending on the volume fraction of nanoparticles in a cluster. It has been found that the SAR of the assembly of oriented clusters decreases by approximately an order of magnitude with an increase in the volume fraction of nanoparticles in a cluster in the range of 0.04-0.2.
RESUMO
Since CdSe nanoplatelets were reported to have a ten-fold higher two-photon (2P) absorption coefficient as compared to quantum dots, we examined their applicability for cell labeling and 2P imaging. CdSSe/ZnCdS core-shell nanoplatelets and CdSe/ZnS quantum dots, both emitting at 585 nm were encapsulated with an amphiphilic zwitterionic polymer having slightly positive zeta potential. As measured with flow cytometry, glioma C6 cells demonstrated equally efficient uptake of nanoplatelets and quantum dots, despite the different sizes of these two types of nanoparticles. 2P fluorescence microscopy revealed ca. two orders of magnitude higher fluorescence response from nanoplatelets thus offering a chance to use them as highly efficient 2P fluorescent labels in biomedicine.
Assuntos
Compostos de Cádmio/química , Nanoestruturas/química , Pontos Quânticos/química , Compostos de Selênio/química , Sulfetos/química , Compostos de Zinco/química , Linhagem Celular Tumoral , Glioma/diagnóstico por imagem , Humanos , Masculino , Microscopia de Fluorescência , Imagem ÓpticaRESUMO
Invited for this month's cover is the group of Prof. Nicolai Bovin from the Russian Academy of Sciences. The cover picture shows how a biotin residue initially hidden in a monolayer formed on the surface of a material by biot-CMG-DOPE (see top left) is pulled out of the layer by the streptavidin molecule (Str) that has come close to it (see below). This can be considered as a model of certain events (in particular, cis protein-ligand interactions) occurring on the surface of a living cell when it is necessary to hide the ligand from undesirable interactions, but leave the possibility of its recognition by a high-affinity protein. The picture is inspired by the legendary Yellow Submarine cartoon. Read the full text of their Full Paper at https://doi.org/10.1002/open.201900276.