Sex-Specific Effects of Cholesteryl Ester Transfer Protein (CETP) on the Perivascular Adipose Tissue.

Cholesteryl ester transfer protein (CETP) increases the atherosclerosis risk by lowering HDL-cholesterol levels. It also exhibits tissue-specific effects independent of HDL. However, sexual dimorphism of CETP effects remains largely unexplored. Here, we hypothesized that CETP impacts the perivascular adipose tissue (PVAT) phenotype and function in a sex-specific manner. PVAT function, gene and protein expression, and morphology were examined in male and female transgenic mice expressing human or simian CETP and their non-transgenic counterparts (NTg). PVAT exerted its anticontractile effect in aortas from NTg males, NTg females, and CETP females, but not in CETP males. CETP male PVAT had reduced NO levels, decreased eNOS and phospho-eNOS levels, oxidative stress, increased NOX1 and 2, and decreased SOD2 and 3 expressions. In contrast, CETP-expressing female PVAT displayed increased NO and phospho-eNOS levels with unchanged NOX expression. NOX inhibition and the antioxidant tempol restored PVAT anticontractile function in CETP males. Ex vivo estrogen treatment also restored PVAT function in CETP males. Moreover, CETP males, but not female PVAT, show increased inflammatory markers. PVAT lipid content increased in CETP males but decreased in CETP females, while PVAT cholesterol content increased in CETP females. CETP male PVAT exhibited elevated leptin and reduced Prdm16 (brown adipocyte marker) expression. These findings highlight CETP sex-specific impact on PVAT. In males, CETP impaired PVAT anticontractile function, accompanied by oxidative stress, inflammation, and whitening. Conversely, in females, CETP expression increased NO levels, induced an anti-inflammatory phenotype, and preserved the anticontractile function. This study reveals sex-specific vascular dysfunction mediated by CETP.

Unknown parent groups and truncated pedigree in single-step genomic evaluations of Murrah buffaloes.

Missing pedigrees may produce bias in genomic evaluations. Thus, strategies to deal with this problem have been proposed as using unknown parent groups (UPG) or truncated pedigrees. The aim of this study was to investigate the impact of modeling missing pedigrees under single-step genomic best linear unbiased prediction (ssGBLUP) evaluations for productive and reproductive traits in dairy buffalo using different approaches: (1) traditional BLUP without UPG (BLUP), (2) traditional BLUP including UPG (BLUP/UPG), (3) ssGBLUP without UPG (ssGBLUP), (4) ssGBLUP including UPG in the A and A22 matrices (ssGBLUP/A_UPG), (5) ssGBLUP including UPG in all elements of the H matrix (ssGBLUP/H_UPG), (6) BLUP with pedigree truncation for the last 3 generations (BLUP/truncated), and (7) ssGBLUP with pedigree truncation for the last 3 generations (ssGBLUP/truncated). Unknown parent groups were not used in the scenarios with truncated pedigree. A total of 3,717, 4,126, and 3,823 records of the first lactation for accumulated 305-d milk yield (MY), age at first calving (AFC), and lactation length (LL), respectively, were used. Accuracies ranged from 0.27 for LL (BLUP) to 0.46 for MY (BLUP), bias ranged from -0.62 for MY (ssGBLUP) to 0.0002 for AFC (BLUP/truncated), and dispersion ranged from 0.88 for MY (BLUP/A_UPG) to 1.13 for LL (BLUP). Genetic trend showed genetic gains for all traits across 20 years of selection, and the impact of including genomic information, UPG, or pedigree truncation under GEBV accuracies ranged among the evaluated traits. Overall, methods using UPG, truncation pedigree, and genomic information exhibited potential to improve GEBV accuracies, bias, and dispersion for all traits compared with other methods. Truncated scenarios promoted high genetic gains. In small populations with few genotyped animals, combining truncated pedigree or UPG with genomic information is a feasible approach to deal with missing pedigrees.

Estimates of genetic parameters for rumination time, feed efficiency, and methane production traits in first-lactation Holstein cows.

The large-scale recording of traits such as feed efficiency (FE) and methane emissions (ME) for use in genetic improvement programs is complex, costly, and time-consuming. Therefore, heritable traits that can be continuously recorded in dairy herds and are correlated with FE and ME traits could provide useful information for genetic evaluation. Rumination time has been suggested to be associated with FE, methane production (MeP; ME in g/d), and production traits at the phenotypic level. Therefore, the objective of this study was to investigate the genetic relationships among rumination time (RT), FE, methane and production traits using 7,358 records from 656 first-lactation Holstein cows. The estimated heritabilities were moderate for RT (0.45 ± 0.14), MeP (0.36 ± 0.12), milk yield (0.40 ± 0.08), fat yield (0.29 ± 0.06), protein yield (0.32 ± 0.07), and energy-corrected milk (0.28 ± 0.07), but were low and nonsignificant for FE (0.15 ± 0.07), which was defined as the residual of the multiple linear regression of DMI on energy-corrected milk and metabolic body weight. A favorable negative genetic correlation was estimated between RT and MeP (-0.53 ± 0.24), whereas a positive favorable correlation was estimated between RT and energy-corrected milk (0.49 ± 0.11). The estimated genetic correlation of RT with FE (-0.01 ± 0.17) was not significantly different from zero but showed a trend of a low correlation with dry matter intake (0.21 ± 0.13). These results indicate that RT is genetically associated with MeP and milk production traits, but high standard errors indicate that further analyses should be conducted to verify these findings when more data for RT, MeP, and FE become available.

Pulpal Temperature Variances During Step-by-step Adhesive Restorative Procedure Using Three Different High-irradiance Light-curing Units.

The rise in temperature in pulp tissues is related not only to heat transfer by high-irradiance light-curing units (LCUs), but also to restorative procedures. This research aimed to compare the rise in pulp temperature (PT) induced by three LCUs at each restorative step while considering the influence of resin composite shade and thickness. To accomplish this, the investigators used a proposed experimental model replicating pulp fluid circulation with a controlled, simulated intraoral temperature in bovine incisors. The recorded external and internal PT ranged from 36.7°C to 37.1°C and 32.7°C to 33.0°C, respectively. A significant decrease of internal temperature was recorded during class V preparation, followed by a progressive and representative rise of temperature in the subsequent restorative steps. The temperature was significantly higher during light curing of the adhesive system using Valo compared to light curing using Elipar and Radii Cal. However, none of the analyzed devices produced a temperature that exceeded the pulp tolerance limit (a temperature increase over 5.5°C). The paired test showed no significant difference in pulp temperature associated with the thickness of the increment of resin composite. However, shade was found to have more influence on the amount of energy absorbed by pulp tissue-A1 samples showed significantly higher temperature variation compared to samples using the A4 shade of resin composite. To conclude, the microcirculation and the performance of procedures under constant air-water flux dissipate the heat absorbed by the pulp. Additionally, the data suggest that all three LCUs analyzed can be safely used in clinical procedures, and that the resin composite shade may influence the amount of irradiance delivered to the tooth surface and represents a significant factor in pulp temperature variance.

In vitro study of the modulatory effects of heat-killed bacterial biomass on aquaculture bacterioplankton communities.

Recent studies have shown that the addition of non-viable microbial biomass or their components (postbiotics) to fish feed can modulate the gut microbiome and positively influence fish health in aquaculture systems. However, no information was hitherto available on the use of non-viable microbial biomass to manipulate aquaculture bacterioplankton communities. To fill this gap, here we used an in vitro model to assess the effects of heat-killed biomasses of an antagonistic strain Pseudoalteromonas rubra SubTr2 and a non-antagonist strain Escherichia coli DH5α on bacterioplankton communities of a recirculating aquaculture system (RAS). Our results showed that these biomasses can have generalist and species-specific effects on aquaculture bacterioplankton structure and function. In addition, they enriched the abundance of bacterial predators, reduced bacterial load and potentially influenced nutrient cycling and pathogen development in aquaculture water. Despite its preliminary nature, for the first time, this study showed that heat-killed microbial biomass has potential application as an in situ modulator of bacterioplankton in aquaculture systems.

Ex vivo exposure to titanium dioxide and silver nanoparticles mildly affect sperm of gilthead seabream (Sparus aurata) - A multiparameter spermiotoxicity approach.

Nanoparticles (NP) are potentially reprotoxic, which may compromise the success of populations. However, the reprotoxicity of NP is still scarcely addressed in marine fish. Therefore, we evaluated the impacts of environmentally relevant and supra environmental concentrations of titanium dioxide (TiO2: 10 to 10,000 µg·L-1) and silver NP (Ag: 0.25 to 250 µg·L-1) on the sperm of gilthead seabream (Sparus aurata). We performed short-term direct exposures (ex vivo) and evaluated sperm motility, head morphometry, mitochondrial function, antioxidant responses and DNA integrity. No alteration in sperm motility (except for supra environmental Ag NP concentration), head morphometry, mitochondrial function, and DNA integrity occurred. However, depletion of all antioxidants occurred after exposure to TiO2 NP, whereas SOD decreased after exposure to Ag NP (lowest and intermediate concentration). Considering our results, the decrease in antioxidants did not indicate vulnerability towards oxidative stress. TiO2 NP and Ag NP induced low spermiotoxicity, without proven relevant ecological impacts.

Comparison of Stud- Retentor Versus Bar-Clip Attachment as Implant- Supported Systems Used in Overdentures: A Systematic Review and Meta-Analysis.

This study aimed to perform a systematic review and meta-analysis to analyze the results obtained clinically for bar-clip versus stud-retainers in overdentures. Three databases (PubMed Central, MEDLINE, and BvSalud) were used beyond a manual search. The study followed strictly the inclusion and exclusion criteria, considering the PICO strategy. For the risk of bias and quality assessment of studies, in the case of RCT, there were six domains of analysis, and for non-RCT studies, the Modified Newcastle-Ottawa Scale was performed. A meta-analysis was developed using the available data for marginal bone loss (MBL) and survival rate. 25 studies were included. The stud-retentor had the lowest implant SR (87.6%) and the greatest MBL (1.96 mm). For the bar-clip system, the mean survival rate was 95.91%, with only 4 studies included for this system, and the mean MBL was 1.13 mm. Only 3 studies directly compared both systems quantitatively, showing a significantly greater MBL toward the stud-retention group. The results may not allow determination of the best system for overdenture (stud retentor or bar-clip). Therefore, most of the studies suggested the stud-retentor as a more preferable system due to better distribution of forces, biological peri-implant behavior, low-cost, and ease for removal facilitating the sanitization and/or repair.

Development of an Anti-Acinetobacter baumannii Biofilm Phage Cocktail: Genomic Adaptation to the Host.

The need for alternatives to antibiotic therapy due to the emergence of multidrug resistant bacteria (MDR), such as the nosocomial pathogen Acinetobacter baumannii, has led to the recovery of phage therapy. In addition, phages can be combined in cocktails to increase the host range. In this study, the evolutionary mechanism of adaptation was utilized in order to develop a phage adapted to A. baumannii, named phage Ab105-2phiΔCI404ad, from a mutant lytic phage, Ab105-2phiΔCI, previously developed by our group. The whole genome sequence of phage Ab105-2phiΔCI404ad was determined, showing that four genomic rearrangements events occurred in the tail morphogenesis module affecting the ORFs encoding the host receptor binding sites. As a consequence of the genomic rearrangements, 10 ORFs were lost and four new ORFs were obtained, all encoding tail proteins; two inverted regions were also derived from these events. The adaptation process increased the host range of the adapted phage by almost 3-fold. In addition, a depolymerase-expressing phenotype, indicated by formation of a halo, which was not observed in the ancestral phage, was obtained in 81% of the infected strains. A phage cocktail was formed by combining this phage with the A. baumannii phage vB_AbaP_B3, known to express a depolymerase. Both the individual phages and the phage cocktail showed strong antimicrobial activity against 5 clinical strains and 1 reference strain of A. baumannii tested. However, in all cases resistance to the bacterial strains was also observed. The antibiofilm activity of the individual phages and the cocktail was assayed. The phage cocktail displayed strong antibiofilm activity.

PI3K inhibition by BKM120 results in anti-proliferative effects on corticotroph tumor cells.

PURPOSE: Cushing's disease is associated with significant morbidity; thus, additional tumor-directed drugs with the potential to exert antineoplastic effects on corticotroph adenoma cells are desired. The phosphoinositide-3-kinase (PI3K)/protein kinase B (AKT) pathway, which plays regulatory role in cell survival and proliferation, is activated in pituitary adenomas. The present study evaluated the effects of BKM120 (Buparlisib), an oral PI3K inhibitor, on cell viability, apoptosis, cell cycle phase distribution, and ACTH production in mouse corticotroph tumor cells. METHODS: AtT-20/D16v-F2 mouse pituitary corticotroph tumor cells were treated with increasing concentrations of BKM120 or vehicle. Cell viability was measured using an MTS-based assay. Apoptosis was evaluated by Annexin V staining. Cell cycle analysis was performed by propidium iodide DNA staining and flow cytometry. Gene expression of cell cycle regulators (Cdkn1b, Ccnd1, Ccne1, Cdk2, Cdk4, Myc, and Rb1) was assessed by qPCR. Protein expression of p27, total and phosphorylated Akt was assessed by Western blot. ACTH levels were measured in the culture supernatants by chemiluminescent immunometric assay. RESULTS: Treatment with BKM120 decreased AtT-20/D16v-F2 cell viability, induced a G0/G1 cell cycle arrest, reduced the phosphorylation of Akt at Serine 473, and increased p27 expression. Furthermore, BKM120 treatment diminished ACTH levels in the cell culture supernatants. CONCLUSION: In vitro inhibition of PI3K/AKT pathway by BKM120 resulted in anti-proliferative effects on corticotroph tumor cells, decreasing cell viability and ACTH production. These encouraging findings shape the path for further experiments with the inhibition of PI3K/AKT pathway in Cushing's disease.

Definition of Environmental Variables and Critical Periods to Evaluate Heat Tolerance in Large White Pigs Based on Single-Step Genomic Reaction Norms.

Properly quantifying environmental heat stress (HS) is still a major challenge in livestock breeding programs, especially as adverse climatic events become more common. The definition of critical periods and climatic variables to be used as the environmental gradient is a key step for genetically evaluating heat tolerance (HTol). Therefore, the main objectives of this study were to define the best critical periods and environmental variables (ENV) to evaluate HT and estimate variance components for HT in Large White pigs. The traits included in this study were ultrasound backfat thickness (BFT), ultrasound muscle depth (MDP), piglet weaning weight (WW), off-test weight (OTW), interval between farrowing (IBF), total number of piglets born (TNB), number of piglets born alive (NBA), number of piglets born dead (NBD), number of piglets weaned (WN), and weaning to estrus interval (IWE). Seven climatic variables based on public weather station data were compared based on three criteria, including the following: (1) strongest G×E estimate as measured by the slope term, (2) ENV yielding the highest theoretical accuracy of the genomic estimated breeding values (GEBV), and (3) variable yielding the highest distribution of GEBV per ENV. Relative humidity (for BFT, MDP, NBD, WN, and WW) and maximum temperature (for OTW, TNB, NBA, IBF, and IWE) are the recommended ENV based on the analyzed criteria. The acute HS (average of 30 days before the measurement date) is the critical period recommended for OTW, BFT, and MDP in the studied population. For WN, WW, IBF, and IWE, a period ranging from 34 days prior to farrowing up to weaning is recommended. For TNB, NBA, and NBD, the critical period from 20 days prior to breeding up to 30 days into gestation is recommended. The genetic correlation values indicate that the traits were largely (WN, WW, IBF, and IWE), moderately (OTW, TNB, and NBA), or weakly (MDP, BFT, and NBD) affected by G×E interactions. This study provides relevant recommendations of critical periods and climatic gradients for several traits in order to evaluate HS in Large White pigs. These observations demonstrate that HT in Large White pigs is heritable, and genetic progress can be achieved through genetic and genomic selection.

Cell-assembled extracellular matrix (CAM): a human biopaper for the biofabrication of pre-vascularized tissues able to connect to the host circulationin vivo.

When considering regenerative approaches, the efficient creation of a functional vasculature, that can support the metabolic needs of bioengineered tissues, is essential for their survival after implantation. However, it is widely recognized that the post-implantation microenvironment of the engineered tissues is often hypoxic due to insufficient vascularization, resulting in ischemia injury and necrosis. This is one of the main limitations of current tissue engineering applications aiming at replacing significant tissue volumes. Here, we have explored the use of a new biomaterial, the cell-assembled extracellular matrix (CAM), as a biopaper to biofabricate a vascular system. CAM sheets are a unique, fully biological and fully human material that has already shown stable long-term implantation in humans. We demonstrated, for the first time, the use of this unprocessed human ECM as a microperforated biopaper. Using microvalve dispensing bioprinting, concentrated human endothelial cells (30 millions ml-1) were deposited in a controlled geometry in CAM sheets and cocultured with HSFs. Following multilayer assembly, thick ECM-based constructs fused and supported the survival and maturation of capillary-like structures for up to 26 d of culture. Following 3 weeks of subcutaneous implantation in a mice model, constructs showed limited degradative response and the pre-formed vasculature successfully connected with the host circulatory system to establish active perfusion.This mechanically resilient tissue equivalent has great potential for the creation of more complex implantable tissues, where rapid anastomosis is sine qua non for cell survival and efficient tissue integration.

Lactobacillus plantarum Lp62 exerts probiotic effects against Gardnerella vaginalis ATCC 49154 in bacterial vaginosis.

The severe side-effects elicited by conventional antibiotic therapy and the recurrence of Bacterial vaginosis-associated bacteria and bacterial resistance have led to the development of novel alternative therapies, among which genital probiotics are widely used. In this study, we aimed to evaluate the antimicrobial activities of Lactobacillus plantarum Lp62 and its supernatant against Gardnerella vaginalis, using both in vitro and in vivo approaches. In vitro assays were used to evaluate the viability of the strain and the antimicrobial activities of the supernatant in different pH ranges. An in vivo assay was performed on female BALB/c mice, wherein the animals were divided into eight groups: four control groups and four treated groups (for curative and preventive therapies). After infecting and treating the mice, the animals were killed to quantify the bacterial load using qPCR, evaluate leucocyte cellular response, determine vaginal cytokine levels and perform cytokine tissue gene expression. Our analyses revealed significant activity of the strain and its supernatant against G. vaginalis. Preliminary in vitro tests showed that the strain grew with equal efficiency in different pH ranges. Meanwhile, the presence of halo and inhibition of pathogen growth established the significant activity of the supernatant against G. vaginalis. We observed that both micro-organisms are resident bacteria of mouse microbiota and that the lactobacilli population growth was affected by G. vaginalis and vice versa. We also observed that the treated groups, with their low bacterial load, absence of leucocyte recruitment, reduced cytokine levels in the vaginal lavage and normalized cytokine gene expression, successfully controlled the infection.

Review: Genetic selection of high-yielding dairy cattle toward sustainable farming systems in a rapidly changing world.

The massive improvement in food production, as a result of effective genetic selection combined with advancements in farming practices, has been one of the greatest achievements of modern agriculture. For instance, the dairy cattle industry has more than doubled milk production over the past five decades, while the total number of cows has been reduced dramatically. This was achieved mainly through the intensification of production systems, direct genetic selection for milk yield and a limited number of related traits, and the use of modern technologies (e.g., artificial insemination and genomic selection). Despite the great betterment in production efficiency, strong drawbacks have occurred along the way. First, across-breed genetic diversity reduced dramatically, with the worldwide use of few common dairy breeds, as well as a substantial reduction in within-breed genetic diversity. Intensive selection for milk yield has also resulted in unfavorable genetic responses for traits related to fertility, health, longevity, and environmental sensitivity. Moving forward, the dairy industry needs to continue refining the current selection indexes and breeding goals to put greater emphasis on traits related to animal welfare, health, longevity, environmental efficiency (e.g., methane emission and feed efficiency), and overall resilience. This needs to be done through the definition of criteria (traits) that (a) represent well the biological mechanisms underlying the respective phenotypes, (b) are heritable, and (c) can be cost-effectively measured in a large number of animals and as early in life as possible. The long-term sustainability of the dairy cattle industry will also require diversification of production systems, with greater investments in the development of genetic resources that are resilient to perturbations occurring in specific farming systems with lesser control over the environment (e.g., organic, agroecological, and pasture-based, mountain-grazing farming systems). The conservation, genetic improvement, and use of local breeds should be integrated into the modern dairy cattle industry and greater care should be taken to avoid further genetic diversity losses in dairy cattle populations. In this review, we acknowledge the genetic progress achieved in high-yielding dairy cattle, closely related to dairy farm intensification, that reaches its limits. We discuss key points that need to be addressed toward the development of a robust and long-term sustainable dairy industry that maximize animal welfare (fundamental needs of individual animals and positive welfare) and productive efficiency, while also minimizing the environmental footprint, inputs required, and sensitivity to external factors.

Activation of C-C motif chemokine receptor 2 modulates testicular macrophages number, steroidogenesis, and spermatogenesis progression.

The monocyte chemoattractant protein 1 (MCP-1) belongs to the CC chemokine family and acts in the recruitment of C-C motif chemokine receptor 2 (CCR2)-positive immune cell types to inflammation sites. In testis, the MCP-1/CCR2 axis has been associated with the macrophage population's functional regulation, which presents significant functions supporting germ cell development. In this context, herein, we aimed to investigate the role of the chemokine receptor CCR2 in mice testicular environment and its impact on male sperm production. Using adult transgenic mice strain that had the CCR2 gene replaced by a red fluorescent protein gene, we showed a stage-dependent expression of CCR2 in type B spermatogonia and early primary spermatocytes. Several parameters related to sperm production were reduced in the absence of CCR2 protein, such as Sertoli cell efficiency, meiotic index, and overall yield of spermatogenesis. Daily sperm production decreased by almost 40%, and several damages in the seminiferous tubules were observed. Significant reduction in the expression of important genes related to the Sertoli cell function (Cnx43, Vim, Ocln, Spna2) and meiosis initiation (Stra8, Pcna, Prdm9, Msh5) occurred in comparison to controls. Also, the number of macrophages significantly decreased in the absence of CCR2 protein, along with a disturbance in Leydig cell steroidogenic activity. In summary, our results show that the non-activation of the MCP-1/CCR2 axis disturbs the testicular homeostasis, interfering in macrophage population, meiosis initiation, blood-testis barrier function, and androgen synthesis, leading to the malfunction of seminiferous tubules, decreased testosterone levels, defective sperm production, and lower fertility index.

Application of proteomic to investigate the different degrees of meat tenderness in Nellore breed.

This study describes the association between meat tenderness and abundance of soluble muscle proteins in Nellore bulls (Bos indicus) using a proteomic approach. We evaluated shear force (SF) of Longissimus thoracis muscle 24 h after slaughter and selected three experimental groups of animals with moderately tender (TE; SF = 3.9 ± 0.7 kg), moderately tough (TO; SF = 5.6 ± 0.7 kg) and very tough meat (TO+; SF = 7.9 ± 1.4 kg). Proteome was investigated by two-dimensional electrophoresis (2D-PAGE) in combination with electrospray ionization-tandem mass spectrometry (ESI-MS/MS). The metabolic proteins triosephosphate isomerase (TPI1) and phosphoglucomutase 1 (PGM1), the structural protein profilin 1 (PFN1), and cytosol aminopeptidase (LAP3) were up-regulated (P < 0.05) in the TE meat group when compared to the TO and TO+ groups. Actin structural proteins (ACTA1, ACTB, and ACTG1), the oxidative stress protein peroxiredoxin (PRDX6, PRDX2, PRDX1, and PARK7), heat shock protein isoforms, and co-chaperones (CDC37 and STIP1) were up-regulated (P < 0.05) in the TO and TO+ meat groups. In addition, we also identified proteins PFN1, LAP3, PRDX1, PRDX2, HSPD1, and ARHGDIA to be associated with beef tenderness. The results reported herein demonstrated that meat tenderness in Nellore cattle depends on the modulation and expression of a set of proteins involved in different biological pathways. SIGNIFICANCE: The manuscript entitled "Application of proteomic to investigate the different degrees of meat tenderness in Nellore breed" describes a classical proteomics work using two-dimensional gel electrophoresis (2D-PAGE), followed by mass spectrometry coupled to electrospray ionization ion trap (ESI-MS/MS) in order to understand the biochemical engineering involved in the process of meat tenderness. We evaluated shear force (SF) of Longissimus thoracis muscle samples of Nellore cattle (n = 90) and select three experimental groups of animals with moderately tender (TE; SF = 3.9 ± 0.7), moderately tough (TO; SF = 5.6 ± 0.7) and very tough meat (TO+; SF = 7.9 ± 1.4). The proteomic approach allowed observing that meat tenderness is influenced by structural proteins (ACTA1, ACTG1, ACTB, MYL1 and PFN1), co-chaperones (CDC37 and STIP1), heat shock proteins (HSP90AA1, HSP90AB1, HSPD1, HSPA1L, HSPA1A and HSPB1), regulatory protein (ARHGDIA), metabolic proteins (TPI1 and PGM1) and oxidative stress proteins (PRDX1, PRDX2, PRDX6, PARK7). Our results suggest that meat tenderness in Nellore depends on the modulation and expression of a set of proteins involved in different biological pathways.

A fast-reciprocating probe array for two-dimensional measurements in the divertor region of the Tokamak à configuration variable.

A detailed description of the construction and commissioning of the fast-moving reciprocating divertor Langmuir probe array on the Tokamak à Configuration Variable (TCV) is presented. A horizontal array of 24 Langmuir probes (12 Mach probes) combined with a fast vertical movement provides unprecedented two-dimensional measurements of the plasma properties across the entire divertor outer leg volume and up to the X-point. The L-shape probe arm has to be very compact to minimize plasma perturbations and, at the same time, has to house 24 coaxial transmission lines, withstand time-averaged heat fluxes of up to ≈30 MW/m2 and accelerations of up to 8 g, and be resilient to violent plasma disruptions. For the fast vertical motion of the probe arm, extending up to 38 cm into the TCV vacuum vessel, an assembly with a precise and powerful linear electric motor (up to 4000 N of force) was mounted in a 4 m high structure within the limited space below the TCV. The diagnostic has already performed measurements in ≈200 plasma discharges and has been hit by ≈20 disruptions without suffering any critical damage. The measurements are qualitatively and quantitatively consistent with other reference diagnostics, such as upstream electron Thomson scattering and downstream wall-embedded Langmuir probes, and are used extensively on the TCV for experimental divertor studies and for comparisons with edge transport and turbulence code results.

Crude glycerin in the supplementation of crossbred heifers in tropical pastures.

Crude glycerin (CG) is a biodiesel byproduct that has been tested as an alternative feed additive for use in beef production. After being absorbed, it is used in the liver to produce glucose, an important precursor of intramuscular fat in ruminants. This study aimed to evaluate the effect of CG (439 g/kg glycerol) on the performance and meat quality of crossbred heifers finished in Urochloa brizantha cv. Marandu. Thirty-six heifers with an initial BW of 301.5 ±â€¯23.02 kg were used. They were supplemented for 154 days with the following levels of CG: mineral mixture (without CG), 33.3, 66.6 and 99.9 g/kg CG in the DM of the supplement. Supplement or pasture DM intakes, slaughter BW and carcass traits were not influenced (P > 0.05) by increasing levels of CG. The total fat content of the meat, the vaccenic (18:1 n-7t) and conjugated linoleic acid (18:2 c9-t11) increased with the addition of CG in the diet (P < 0.05). Crude glycerin can be included up to 99.9 g/kg of the total diet without changing the performance of crossbred heifers finished in the tropical pasture.