Photophysical Analysis of Aggregation-Induced Emission (AIE) Luminogens Based on Triphenylamine and Thiophene: Insights into Emission Behavior in Solution and PMMA Films.

Aggregation-Induced Emission (AIE) luminogens have garnered significant interest due to their distinctive applications in different applications. Among the diverse molecular architectures, those based on triphenylamine and thiophene hold prominence. However, a comprehensive understanding of the deactivation mechanism both in solution and films remains lacking. In this study, we synthesized and characterized spectroscopically two AIE luminogens: 5-(4-(bis(4-methoxyphenyl)amino)phenyl)thiophene-2-carbaldehyde (TTY) and 5'-(4-(bis(4-methoxyphenyl)amino)phenyl)-[2,2'-bithiophene]-5-carbaldehyde (TTO). Photophysical and theoretical analyses were conducted in both solution and PMMA films to understand the deactivation mechanism of TTY and TTO. In diluted solutions, the emission behavior of TTY and TTO is influenced by the solvent, and the deactivation of the excited state can occur via locally excited (LE) or twisted intramolecular charge transfer (TICT) state. In PMMA films, rotational and translational movements are constrained, necessitating emission solely from the LE state. Nevertheless, in the PMMA film, excimers-like structures form, resulting in the emergence of a longer wavelength band and a reduction in emission intensity. The zenith of emission intensity occurs when molecules are dispersed at higher concentrations within PMMA, effectively diminishing the likelihood of excimer-like formations. Luminescent Solar Concentrators (LSC) were fabricated to validate these findings, and the optical efficiency was studied at varying concentrations of luminogen and PMMA.

Poly(ethylene imine)-chitosan carbon dots: study of its physical-chemical properties and biological in vitro performance.

Carbon dots (CDs) have been quickly extended for nanomedicine uses because of their multiple applications, such as bioimaging, sensors, and drug delivery. However, the interest in increasing their photoluminescence properties is not always accompanied by cytocompatibility. Thus, a knowledge gap exists regarding their interactions with biological systems linked to the selected formulations and synthesis methods. In this work, we have developed carbon dots (CDs) based on poly (ethylene imine) (PEI) and chitosan (CS) by using microwave irradiation, hydrothermal synthesis, and a combination of both, and further characterized them by physicochemical and biological means. Our results indicate that synthesized CDs have sizes between 1 and 5 nm, a high presence of amine groups on the surface, and increased positive ζ potential values. Further, it is established that the choice and use of different synthesis procedures can contribute to a different answer to the CDs regarding their optical and biological properties. In this regard, PEI-only CDs showed the longest photoluminescent emission lifetime, non-hemolytic activity, and high toxicity against fibroblast. On the other hand, CS-only CDs have higher PL emission, non-cytotoxicity associated with fibroblast, and high hemolytic activity. Interestingly, their combination using the proposed methodologies allow a synergic effect in their CDs properties. Therefore, this work contributes to developing and characterizing CD formulations based on PEI and CS and better understanding the CD's properties and biological interaction.

Multifunctional Dithiadiazolyl Radicals: Fluorescence, Electroluminescence, and Photoconducting Behavior in Pyren-1'-yl-dithiadiazolyl.

The pyren-1'-yl-functionalized dithiadiazolyl (DTDA) radical, C16H9CNSSN (1), is monomeric in solution and exhibits fluorescence in the deep-blue region of the visible spectrum (440 nm) upon excitation at 241 nm. The salt [1][GaCl4] exhibits similar emission, reflecting the largely spectator nature of the radical in the fluorescence process, although the presence of the radical leads to a modest quenching of emission (ΦF = 98% for 1+ and 50% for 1) through enhancement of non-radiative decay processes. Time-dependent density functional theory studies on 1 coupled with the similar emission profiles of both 1+ and 1 are consistent with the initial excitation being of predominantly pyrene π-π* character. Spectroscopic studies indicate stabilization of the excited state in polar media, with the fluorescence lifetime for 1 (τ = 5 ns) indicative of a short-lived excited state. Comparative studies between the energies of the frontier orbitals of pyren-1'-yl nitronyl nitroxide (2, which is not fluorescent) and 1 reveal that the energy mismatch and poor spatial overlap between the DTDA radical SOMO and the pyrene π manifold in 1 efficiently inhibit the non-radiative electron-electron exchange relaxation pathway previously described for 2. Solid-state films of both 1 and [1][GaCl4] exhibit broad emission bands at 509 and 545 nm, respectively. Incorporation of 1 within a host matrix for OLED fabrication revealed electroluminescence, with CIE coordinates of (0.205, 0.280) corresponding to a sky-blue emission. The brightness of the device reached 1934 cd/m2 at an applied voltage of 16 V. The crystal structure of 1 reveals a distorted π-stacked motif with almost regular distances between the pyrene rings but alternating long-short contacts between DTDA radicals. Solid state measurements on a thin film of 1 reveal emission occurs at shorter wavelengths (375 nm) whereas conductivity measurements on a single crystal of 1 show a photoconducting response at longer wavelength excitation (455 nm).

Photoelectrochemical Reduction of Carbon Dioxide on Quantum-Dot-Modified Electrodes by Electric Field Directed Layer-by-Layer Assembly Methodology.

The photoelectrocatalytic reduction of CO2 on ITO-modified electrodes, with electrostatic assemblies (polycations/quantum dots) (polycations=poly diallyldimethylammonium, PDDA, and poly(2-trimethylammonium)ethyl methacrylate, PMAEMA)), is described in the present work. Nanoparticles of CdTe (5.6 nm) were incorporated through an electric field directed layer-by-layer assembly method on ITO electrodes. Modified surfaces were active toward the reduction of CO2 at -400 mV vs Ag/AgCl; the activity of ITO-(PMAEMA/QDs)6 electrodes was enhanced by 300 mV under irradiation conditions. The photoelectrocatalytic effect was associated with the structure of the polycation and its influence in the assembly. Reaction products at -450 mV were H2, CO, CH3OH, and HCOH.

Plasmon enhanced fluorescence with aggregated shell-isolated nanoparticles.

Shell-isolated nanoparticles (SHINs) nanostructures provide a versatile substrate where the localized surface plasmon resonances (LSPRs) are well-defined. For SHINEF, the silver (or gold) metal core is protected by the SiO2 coating, which is thicker than the critical distance for minimum quenching by the metal. In the present work, it is shown that an increase in the SHINEF enhancement factor may be achieved by inducing SHIN aggregation with electrolytes in solution. The proof of concept is demonstrated using NaCl as aggregating agent, although other inorganic salts will also aggregate SHIN nanoparticles. As much as a 10-fold enhancement in the SHINEF enhancement factor (EF) may be achieved by tuning the electrolyte concentrations in solution. The SHINEF experiments include the study of the aggregation effect controlling gold SHIN's surface concentration via spraying. Au-SHINs are sprayed onto layer-by-layer (LbL) and Langmuir-Blodgett (LB) films, and samples are fabricated using fluorophores with low and also high quantum yield.

Enhanced glutathione content allows the in vivo synthesis of fluorescent CdTe nanoparticles by Escherichia coli.

The vast application of fluorescent semiconductor nanoparticles (NPs) or quantum dots (QDs) has prompted the development of new, cheap and safer methods that allow generating QDs with improved biocompatibility. In this context, green or biological QDs production represents a still unexplored area. This work reports the intracellular CdTe QDs biosynthesis in bacteria. Escherichia coli overexpressing the gshA gene, involved in glutathione (GSH) biosynthesis, was used to produce CdTe QDs. Cells exhibited higher reduced thiols, GSH and Cd/Te contents that allow generating fluorescent intracellular NP-like structures when exposed to CdCl(2) and K(2)TeO(3). Fluorescence microscopy revealed that QDs-producing cells accumulate defined structures of various colors, suggesting the production of differently-sized NPs. Purified fluorescent NPs exhibited structural and spectroscopic properties characteristic of CdTe QDs, as size and absorption/emission spectra. Elemental analysis confirmed that biosynthesized QDs were formed by Cd and Te with Cd/Te ratios expected for CdTe QDs. Finally, fluorescent properties of QDs-producing cells, such as color and intensity, were improved by temperature control and the use of reducing buffers.

Biomimetic, mild chemical synthesis of CdTe-GSH quantum dots with improved biocompatibility.

Multiple applications of nanotechnology, especially those involving highly fluorescent nanoparticles (NPs) or quantum dots (QDs) have stimulated the research to develop simple, rapid and environmentally friendly protocols for synthesizing NPs exhibiting novel properties and increased biocompatibility. In this study, a simple protocol for the chemical synthesis of glutathione (GSH)-capped CdTe QDs (CdTe-GSH) resembling conditions found in biological systems is described. Using only CdCl(2), K(2)TeO(3) and GSH, highly fluorescent QDs were obtained under pH, temperature, buffer and oxygen conditions that allow microorganisms growth. These CdTe-GSH NPs displayed similar size, chemical composition, absorbance and fluorescence spectra and quantum yields as QDs synthesized using more complicated and expensive methods.CdTe QDs were not freely incorporated into eukaryotic cells thus favoring their biocompatibility and potential applications in biomedicine. In addition, NPs entry was facilitated by lipofectamine, resulting in intracellular fluorescence and a slight increase in cell death by necrosis. Toxicity of the as prepared CdTe QDs was lower than that observed with QDs produced by other chemical methods, probably as consequence of decreased levels of Cd(+2) and higher amounts of GSH. We present here the simplest, fast and economical method for CdTe QDs synthesis described to date. Also, this biomimetic protocol favors NPs biocompatibility and helps to establish the basis for the development of new, "greener" methods to synthesize cadmium-containing QDs.

Surface-enhanced spectra on D-gluconic acid coated silver nanoparticles.

Coated silver (Ag) colloids synthesized with D-glucose permit the observation of surface-enhanced fluorescence (SEF) and surface-enhanced resonance Raman scattering (SERRS) of the rhodamine B (RhB) molecule. The organic coating formed during the synthesis of the Ag nanostructures was identified by its surface-enhanced Raman scattering (SERS) spectrum as D-gluconic acid. The RhB molecule is used to exemplify the distance dependence of SEF and SERRS on the coated Ag nanostructures. The fluorescence enhancement factor for RhB on D-gluconic acid coated silver nanoparticles was determined experimentally and estimated using a simple model. Further support for the plasmon enhancement is obtained from the fact that the measured fluorescence lifetime of RhB on the silver coated with D-gluconic acid is shorter than that found on a glass surface. A very modest enhancement factor is obtained, as expected for very short distance between RhB and the metal surface. Given the very thin metal-fluorophore separation, estimated from the size of the D-gluconic acid, the energy transfer or fluorescence quenching is still efficient and the SEF enhancement is just overcoming the energy transfer. Therefore, both SEF and SERRS are observed. Notably, the aggregation of coated nanoparticles also increases the enhancement factor for SEF.

Vibrational and surface-enhanced Raman spectra of 1,6-diphenyl-1,3,5-hexatriene.

The vibrational spectra and surface-enhanced Raman scattering (SERS) of 1,6-diphenyl-1,3,5-hexatriene (DPH) are discussed. The fundamental vibrational frequencies, overtones, and combinations observed in the infrared and Raman spectra of DPH are reported. The interpretation of the observed vibrational spectra was supported by a complete geometry optimization, followed by vibrational frequency and intensity computations for the cis- and trans- isomers of the DPH using density functional theory at the B3LYP/6-31G(d,p) level of theory. Because the molecule is photo-chemically active on Ag metal surfaces, the best SERS results for silver islands were obtained at low temperature and low energy density of the exciting laser line. DPH SERS on Au films was obtained at room temperature.