Ether-Soluble Cu53 Nanoclusters as an Effective Precursor of High-Quality CuI Films for Optoelectronic Applications.

An effective strategy is developed to synthesize high-nuclearity Cu clusters, [Cu53 (RCOO)10 (C≡CtBu)20 Cl2 H18 ]+ (Cu53 ), which is the largest CuI /Cu0 cluster reported to date. Cu powder and Ph2 SiH2 are employed as the reducing agents in the synthesis. As revealed by single-crystal diffraction, Cu53 is arranged as a four-concentric-shell Cu3 @Cu10 Cl2 @Cu20 @Cu20 structure, possessing an atomic arrangement of concentric M12 icosahedral and M20 dodecahedral shells which popularly occurs in Au/Ag nanoclusters. Surprisingly, Cu53 can be dissolved in diethyl ether and spin coated to form uniform nanoclusters film on organolead halide perovskite. The cluster film can subsequently be converted into high-quality CuI film via in situ iodination at room temperature. The as-fabricated CuI film is an excellent hole-transport layer for fabricating highly stable CuI-based perovskite solar cells (PSCs) with 14.3 % of efficiency.

High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer.

Perovskite solar cells (PSCs) have reached certified efficiencies of up to 23.7% but suffered from frailness and instability when exposed to ambient atmosphere. Zinc oxide (ZnO), when used as electron transport layer (ETL) on PSCs, gives rise to excellent electronic, optic, and photonic properties, yet the Lewis basic nature of ZnO surface leads to deprotonation of the perovskite layer, resulting in serious degradation of PSCs using ZnO as ETL. Here, we report a simple but effective strategy to convert ZnO surface into ZnS at the ZnO/perovskite interface by sulfidation. The sulfide on ZnO-ZnS surface binds strongly with Pb2+ and creates a novel pathway of electron transport to accelerate electron transfer and reduce interfacial charge recombination, yielding a champion efficiency of 20.7% with improved stability and no appreciable hysteresis. The model devices modified with sulfide maintained 88% of their initial performance for 1000 h under storage condition and 87% for 500 h under UV radiation. ZnS is demonstrated to act as both a cascade ETL and a passivating layer for enhancing the performance of PSCs.

Economizing Production of Diverse 2D Layered Metal Hydroxides for Efficient Overall Water Splitting.

2D layered metal hydroxides (LMH) are promising materials for electrochemical energy conversion and storage. Compared with exfoliation of bulk layered materials, wet chemistry synthesis of 2D LMH materials under mild conditions still remains a big challenge. Here, an "MgO-mediated strategy" for mass production of various 2D LMH nanosheets is presented by hydrolyzing MgO in metal salt aqueous solutions at room temperature. Benefiting from this economical and scalable strategy, ultrathin LMH nanosheets (M = Ni, Fe, Co, NiFe, and NiCo) and their derivatives (e.g., metal oxides and sulfides) can be synthesized in high yields. More importantly, this strategy opens up opportunities to fabricate hierarchically structured LMH nanosheets, resulting in high-performance electrocatalysts for the oxygen- and hydrogen-evolution reactions to realize stable overall water splitting with a low cell voltage of 1.55 V at 10 mA cm-2 . This work provides a powerful platform for the synthesis and applications of 2D materials.

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd-O-Sn Interfaces.

Electrochemical conversion of CO2 into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO2 structure, ultrathin Pd nanosheets partially capped by SnO2 nanoparticles, is designed to enable multi-electron transfer for selective electroreduction of CO2 into CH3 OH. Such a structure design not only enhances the adsorption of CO2 on SnO2 , but also weakens the binding strength of CO on Pd due to the as-built Pd-O-Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal-based catalysts by creating metal oxide interfaces for selective electroreduction of CO2 .

Ultrastable atomic copper nanosheets for selective electrochemical reduction of carbon dioxide.

The electrochemical conversion of CO2 and H2O into syngas using renewably generated electricity is an attractive approach to simultaneously achieve chemical fixation of CO2 and storage of renewable energy. Developing cost-effective catalysts for selective electroreduction of CO2 into CO is essential to the practical applications of the approach. We report a simple synthetic strategy for the preparation of ultrathin Cu/Ni(OH)2 nanosheets as an excellent cost-effective catalyst for the electrochemical conversion of CO2 and H2O into tunable syngas under low overpotentials. These hybrid nanosheets with Cu(0)-enriched surface behave like noble metal nanocatalysts in both air stability and catalysis. Uniquely, Cu(0) within the nanosheets is stable against air oxidation for months because of the presence of formate on their surface. With the presence of atomically thick ultrastable Cu nanosheets, the hybrid Cu/Ni(OH)2 nanosheets display both excellent activity and selectivity in the electroreduction of CO2 to CO. At a low overpotential of 0.39 V, the nanosheets provide a current density of 4.3 mA/cm2 with a CO faradaic efficiency of 92%. No decay in the current is observed for more than 22 hours. The catalysts developed in this work are promising for building low-cost CO2 electrolyzers to produce CO.

Self-supporting sulfur cathodes enabled by two-dimensional carbon yolk-shell nanosheets for high-energy-density lithium-sulfur batteries.

How to exert the energy density advantage is a key link in the development of lithium-sulfur batteries. Therefore, the performance degradation of high-sulfur-loading cathodes becomes an urgent problem to be solved at present. In addition, the volumetric capacities of high-sulfur-loading cathodes are still at a low level compared with their areal capacities. Aiming at these issues, two-dimensional carbon yolk-shell nanosheet is developed herein to construct a novel self-supporting sulfur cathode. The cathode with high-sulfur loading of 5 mg cm-2 and sulfur content of 73 wt% not only delivers an excellent rate performance and cycling stability, but also provides a favorable balance between the areal (5.7 mAh cm-2) and volumetric (1330 mAh cm-3) capacities. Remarkably, an areal capacity of 11.4 mAh cm-2 can be further achieved by increasing the sulfur loading from 5 to 10 mg cm-2. This work provides a promising direction for high-energy-density lithium-sulfur batteries.One of the challenges facing lithium-sulfur batteries is to develop cathodes with high mass and high volume loading. Here the authors show that two-dimensional carbon yolk-shell nanosheets are promising sulfur host materials, enabling stable battery cells with high energy density.