Studying Molecular Rearrangement of P1 Dye at a Passivating Alumina Surface Using Vibrational Sum-Frequency Generation Spectroscopy: Effect of Atomic-Level Roughness.

The effect of roughness and thickness of alumina layers, mimicking the passivation layer commonly used in dye-sensitized photoelectrodes, on the molecular adsorption of P1 dye, 4-(bi(4-(2,2-dicyano-vinyl)-thiophene-2-yl]-phenyl]-aminobenzoic acid) has been studied using surface-sensitive vibrational sum frequency generation(VSFG) spectroscopy. The VSFG spectra reveal the formation of poorly ordered dye layers on relatively rough surfaces where XPS measures a higher dye loading. Furthermore, these poorly ordered dye molecules are responsible for the generation of trapped electronic states as probed by successive photoluminescence (PL) measurements. Surface sensitive VSFG spectroscopy in combination with XPS and PL measurements provide complementary spectral information on ordering of the adsorbed dyes, their density on the surface and electronic states of the adsorbed monolayer which are prerequisite for improving our understanding of molecularly functionalized photoelectrodes and their further development.

Amorphous Silicon Thin-Film Solar Cells on Fabrics as Large-Scale Detectors for Textile Personal Protective Equipment in Active Laser Safety.

Laser safety is starting to play an increasingly important role, especially when the laser is used as a tool. Passive laser safety systems quickly reach their limits and, in some cases, provide inadequate protection. To counteract this, various active systems have been developed. Flexible and especially textile-protective materials pose a special challenge. The market still lacks personal protective equipment (PPE) for active laser safety. Covering these materials with solar cells as large-area optical detectors offers a promising possibility. In this work, an active laser protection fabric with amorphous silicon solar cells is presented as a large-scale sensor for continuous wave and pulsed lasers (down to ns). First, the fabric and the solar cells were examined separately for irradiation behavior and damage. Laser irradiation was performed at wavelengths of 245, 355, 532, and 808 nm. The solar cell sensors were then applied directly to the laser protection fabric. The damage and destruction behavior of the active laser protection system was investigated. The results show that the basic safety function of the solar cell is still preserved when the locally damaged or destroyed area is irradiated again. A simple automatic shutdown system was used to demonstrate active laser protection within 50 ms.

Apparatus to investigate liquid oxygen droplet combustion in hydrogen under microgravity conditions.

To investigate the fundamentals of liquid oxygen droplet combustion in hydrogen under microgravity conditions, a drop tower apparatus has been developed. In a cryogenic combustion chamber cooled with liquid nitrogen, single oxygen droplets with a diameter of 1 mm are suspended at the tip of a thin suspender. Ignition is accomplished after microgravity conditions are reached by a near-infrared laser, which generates a plasma spark positioned in the immediate vicinity of the oxygen droplet. The subsequent combustion is investigated with various optical diagnostics. Shadowgraph imaging is used to determine the initial droplet size and the droplet diameter regression with high temporal resolution. In addition, the position and diameter of the flame are determined by OH chemiluminescence imaging. The oxygen/hydrogen combustion at two different pressure levels is reported. At a pressure of 0.1 MPa, irregular structures appear to form on the droplet surface during the combustion process, which lasts 137 ms before the droplet is completely consumed. The formation of these irregular structures is consistent with the condensation and freezing of water vapor in the cold-temperature region near the droplet surface. At a higher pressure of 4 MPa (reduced pressure pr,O2 =0.79), the water ice formation is significantly reduced due to the shorter burning time of 66 ms and the closer proximity of the flame to the droplet surface. The measured burning constant is k0.1 = 5.5 mm2/s at 0.1 MPa and k4 = 7.1 mm2/s at 4 MPa, respectively. This increase with increasing pressure is consistent with the smaller flame standoff distance.

Diode pumped solid state kilohertz disk laser system for time-resolved combustion diagnostics under microgravity at the drop tower Bremen.

We describe a specially designed diode pumped solid state laser system based on the disk laser architecture for combustion diagnostics under microgravity (µg) conditions at the drop tower in Bremen. The two-stage oscillator-amplifier-system provides an excellent beam profile (TEM00) at narrowband operation (Δλ < 1 pm) and is tunable from 1018 nm to 1052 nm. The laser repetition rate of up to 4 kHz at pulse durations of 10 ns enables the tracking of processes on a millisecond time scale. Depending on the specific issue it is possible to convert the output radiation up to the fourth harmonic around 257 nm. The very compact laser system is integrated in a slightly modified drop capsule and withstands decelerations of up to 50 g (>11 ms). At first the concept of the two-stage disk laser is briefly explained, followed by a detailed description of the disk laser adaption to the drop tower requirements with special focus on the intended use under µg conditions. In order to demonstrate the capabilities of the capsule laser as a tool for µg combustion diagnostics, we finally present an investigation of the precursor-reactions before the droplet ignition using 2D imaging of the Laser Induced Fluorescence of formaldehyde.

Enhanced laser-induced deflection measurements for low absorbing highly reflecting mirrors.

A new concept enhances the capability of photo-thermal absorption measurements with transversal probe beam guiding by overcoming drawbacks such as a lack of sensitivity for materials with low photo-thermal response and/or round substrate geometry. The sandwich concept using the laser-induced deflection technique is introduced and tested for the investigation of highly reflecting (HR) coatings. The idea behind the sandwich concept is based on the decoupling of the optical materials for the pump and probe beams. This is realized by either placing a HR coated rectangular substrate in between two optical (sandwich) plates or attaching a HR coated thin round substrate onto one optical plate. For both configurations, the sandwich concept results in a strong increase in sensitivity for the measurement of HR coatings deposited onto photo-thermally insensitive substrates. Experiments reveal that for a CaF2 substrate, up to two orders of magnitude enhancement in sensitivity can be achieved.

Plasmonic coupling and long-range transfer of an excitation along a DNA nanowire.

We demonstrate an excitation transfer along a fluorescently labeled dsDNA nanowire over a length of several micrometers. Launching of the excitation is done by exciting a localized surface plasmon mode of a 40 nm silver nanoparticle by 800 nm femtosecond laser pulses via two-photon absorption. The plasmonic mode is subsequently coupled or transformed to excitation in the nanowire in contact with the particle and propagated along it, inducing bleaching of the dyes on its way. In situ as well as ex situ fluorescence microscopy is utilized to observe the phenomenon. In addition, transfer of the excitation along the nanowire to another nanoparticle over a separation of 5.7 µm was clearly observed. The nature of the excitation coupling and transfer could not be fully resolved here, but injection of an electron into the DNA from the excited nanoparticle and subsequent coupled transfer of charge (Dexter) and delocalized exciton (Frenkel) is the most probable mechanism. However, a direct plasmonic or optical coupling and energy transfer along the nanowire cannot be totally ruled out either. By further studies the observed phenomenon could be utilized in novel molecular systems, providing a long-needed communication method between molecular devices.

Extending the narrow-bandwidth tunability of a thin disk Yb:YAG laser regenerative amplifier.

We investigate the characteristics of a thin disk laser system based on the master oscillator-power amplifier design. The amplifier emits parasitic laser oscillation (PL) when the wavelength of the tunable narrow-bandwidth seed pulse is detuned more than 4 nm from the gain maximum at 1030 nm. For suppression of this unwanted PL, a birefringent filter (Lyot filter) was inserted into the amplifier cavity in order to generate wavelength selective losses, especially at the gain maximum of the Yb:YAG crystal. It is shown that the tunability range of the laser system can be extended by a factor of 4, when a properly chosen Lyot filter is applied and its angle of rotation is adapted to the seed wavelength of the system.

Spectrally resolved cavity ring down measurement of high reflectivity mirrors using a supercontinuum laser source.

We investigate a cavity ring down setup that offers the possibility to measure the spectrally resolved reflectivities of high reflectivity mirrors. The setup consists of a resonator (ring down cavity) and an intensified CCD camera system combined with a spectrograph for spectral resolution. A commercial supercontinuum laser (350-1750 nm) is applied as a compact excitation source. It is based on a photonic crystal fiber that is pumped by a q-switched microchip laser (1.6 ns pulse duration, 25 kHz repetition rate). This combination allows simultaneously recording the transmittance of the cavity over a wide wavelength range determined by the excitation source and the spectral sensitivity of the detector. The photon lifetimes inside the cavity (ring down times) are measured with high spectral resolution by means of an intensified camera system. Subsequently shifting the "gate" of the image intensifier from short to long delay times after the excitation pulse allows calculation of the reflectivity spectrum of the mirrors. Comparison of these results with measurements using a conventional setup (laser diode 675 nm and photomultiplier tube) clearly shows the high potential of the method due to the multichannel excitation and the detection scheme.