RESUMO
Angle-sensitive photodetectors are a promising device technology for many advanced imaging functionalities, including lensless compound-eye vision, lightfield sensing, optical spatial filtering, and phase imaging. Here we demonstrate the use of plasmonic gradient metasurfaces to tailor the angular response of generic planar photodetectors. The resulting devices rely on the phase-matched coupling of light incident at select geometrically tunable angles into guided plasmonic modes, which are then scattered and absorbed in the underlying photodetector active layer. This approach naturally introduces sharp peaks in the angular response, with smaller footprint and reduced guided-mode radiative losses (and therefore improved spatial resolution and sensitivity) compared to analogous devices based on diffractive coupling. More broadly, these results highlight a promising new application space of flat optics, where gradient metasurfaces are integrated within image sensors to enable unconventional capabilities with enhanced system miniaturization and design flexibility.
RESUMO
Photonics provides a promising approach for image processing by spatial filtering, with the advantage of faster speeds and lower power consumption compared to electronic digital solutions. However, traditional optical spatial filters suffer from bulky form factors that limit their portability. Here we present a new approach based on pixel arrays of plasmonic directional image sensors, designed to selectively detect light incident along a small, geometrically tunable set of directions. The resulting imaging systems can function as optical spatial filters without any external filtering elements, leading to extreme size miniaturization. Furthermore, they offer the distinct capability to perform multiple filtering operations at the same time, through the use of sensor arrays partitioned into blocks of adjacent pixels with different angular responses. To establish the image processing capabilities of these devices, we present a rigorous theoretical model of their filter transfer function under both coherent and incoherent illumination. Next, we use the measured angle-resolved responsivity of prototype devices to demonstrate two examples of relevant functionalities: (1) the visualization of otherwise invisible phase objects and (2) spatial differentiation with incoherent light. These results are significant for a multitude of imaging applications ranging from microscopy in biomedicine to object recognition for computer vision.
RESUMO
Graphene plasmonics provides a powerful means to extend the reach of metasurface technology to the terahertz spectral region, with the distinct advantage of active tunability. Here we introduce a comprehensive design platform for the development of THz metasurfaces capable of complex wavefront manipulation functionalities, based on ribbon-shaped graphene plasmonic resonators combined with metallic antennas on a vertical cavity. Importantly, this approach is compatible with the electrical characteristics of graphene grown by chemical vapor deposition (CVD), which can provide the required mm-scale dimensions unlike higher-mobility exfoliated samples. We present a single device structure that can be electrically reconfigured to enable multiple functionalities with practical performance metrics, including tunable beam steering and focusing with variable numerical aperture. These capabilities are promising for a significant impact in a wide range of THz technologies for sensing, imaging, and future wireless communications.
RESUMO
The vision system of arthropods such as insects and crustaceans is based on the compound-eye architecture, consisting of a dense array of individual imaging elements (ommatidia) pointing along different directions. This arrangement is particularly attractive for imaging applications requiring extreme size miniaturization, wide-angle fields of view, and high sensitivity to motion. However, the implementation of cameras directly mimicking the eyes of common arthropods is complicated by their curved geometry. Here, we describe a lensless planar architecture, where each pixel of a standard image-sensor array is coated with an ensemble of metallic plasmonic nanostructures that only transmits light incident along a small geometrically-tunable distribution of angles. A set of near-infrared devices providing directional photodetection peaked at different angles is designed, fabricated, and tested. Computational imaging techniques are then employed to demonstrate the ability of these devices to reconstruct high-quality images of relatively complex objects.
RESUMO
Group-IV semiconductors, which provide the leading materials platform of micro- electronics, are generally unsuitable for light emitting device applications because of their indirect- bandgap nature. This property currently limits the large-scale integration of electronic and photonic functionalities on Si chips. The introduction of tensile strain in Ge, which has the effect of lowering the direct conduction-band minimum relative to the indirect valleys, is a promising approach to address this challenge. Here we review recent work focused on the basic science and technology of mechanically stressed Ge nanomembranes, i.e., single-crystal sheets with thicknesses of a few tens of nanometers, which can sustain particularly large strain levels before the onset of plastic deformation. These nanomaterials have been employed to demonstrate large strain-enhanced photoluminescence, population inversion under optical pumping, and the formation of direct-bandgap Ge. Furthermore, Si-based photonic-crystal cavities have been developed that can be combined with these Ge nanomembranes without limiting their mechanical flexibility. These results highlight the potential of strained Ge as a CMOS-compatible laser material, and more in general the promise of nanomembrane strain engineering for novel device technologies.
RESUMO
This paper reviews the device physics and technology of optoelectronic devices based on semiconductors of the GaN family, operating in the spectral regions from deep UV to Terahertz. Such devices include LEDs, lasers, detectors, electroabsorption modulators and devices based on intersubband transitions in AlGaN quantum wells (QWs). After a brief history of the development of the field, we describe how the unique crystal structure, chemical bonding, and resulting spontaneous and piezoelectric polarizations in heterostructures affect the design, fabrication and performance of devices based on these materials. The heteroepitaxial growth and the formation and role of extended defects are addressed. The role of the chemical bonding in the formation of metallic contacts to this class of materials is also addressed. A detailed discussion is then presented on potential origins of the high performance of blue LEDs and poorer performance of green LEDs (green gap), as well as of the efficiency reduction of both blue and green LEDs at high injection current (efficiency droop). The relatively poor performance of deep-UV LEDs based on AlGaN alloys and methods to address the materials issues responsible are similarly addressed. Other devices whose state-of-the-art performance and materials-related issues are reviewed include violet-blue lasers, 'visible blind' and 'solar blind' detectors based on photoconductive and photovoltaic designs, and electroabsorption modulators based on bulk GaN or GaN/AlGaN QWs. Finally, we describe the basic physics of intersubband transitions in AlGaN QWs, and their applications to near-infrared and terahertz devices.
RESUMO
Graphene is a promising material for strain engineering based on its excellent flexibility and elastic properties, coupled with very high electrical mobility. In order to implement strain devices, it is important to understand and control the clamping of graphene to its support. Here, we investigate the limits of the strong van der Waals interaction on friction clamping. We find that the friction of graphene on a SiO2 substrate can support a maximum local strain gradient and that higher strain gradients result in sliding and strain redistribution. Furthermore, the friction decreases with increasing strain. The system used is graphene placed over a nanoscale SiO2 grating, causing strain and local strain variations. We use a combination of atomic force microscopy and Raman scattering to determine the friction coefficient, after accounting for compression and accidental charge doping, and model the local strain variation within the laser spot size. By using uniaxial strain aligned to a high crystal symmetry direction, we also determine the 2D Raman Grüneisen parameter and deformation potential in the zigzag direction.
RESUMO
The controlled application of strain in crystalline semiconductors can be used to modify their basic physical properties to enhance performance in electronic and photonic device applications. In germanium, tensile strain can even be used to change the nature of the fundamental energy band gap from indirect to direct, thereby dramatically increasing the interband radiative efficiency and allowing population inversion and optical gain. For biaxial tension, the required strain levels (around 2%) are physically accessible but necessitate the use of very thin crystals. A particularly promising materials platform in this respect is provided by Ge nanomembranes, that is, single-crystal sheets with nanoscale thicknesses that are either completely released from or partially suspended over their native substrates. Using this approach, Ge tensilely strained beyond the expected threshold for direct-band gap behavior has recently been demonstrated, together with strong strain-enhanced photoluminescence and evidence of population inversion. We review the basic properties, state of the art, and prospects of tensilely strained Ge for infrared photonic applications.
RESUMO
By virtue of their distinctive electronic properties (including linear energy dispersion, large velocity, and potentially ultra-high mobility even at room temperature), charge carriers in single-layer graphene are uniquely suited to radiation mechanisms that so far have been the primary domain of electron beams in vacuum-based systems. Here, we consider the use of sinusoidally corrugated graphene sheets for the generation of THz light based on a fundamentally new cyclotron-like radiation process, which does not require the application of any external magnetic field. Instead, periodic angular motion under bias is simply produced by the graphene mechanical corrugation, combined with its two-dimensional nature which ensures that the carrier trajectories perfectly conform to the corrugation. Numerical simulations indicate that technologically significant output power levels can correspondingly be obtained at geometrically tunable THz frequencies. This mechanism (as well as similar electron-beam radiation processes such as the Smith-Purcell and Cherenkov effects in periodic nanostructures) may open the way for a new family of THz optoelectronic devices based on graphene, including solid-state 'free-electron' lasers potentially capable of room-temperature operation.
RESUMO
SiGe/Si quantum wells are of great interest for the development of Group-IV THz quantum cascade lasers. The main advantage of Group-IV over III-V materials such as GaAs is that, in the former, polar phonon scattering, which significantly diminishes the efficiency of intersubband light emission, is absent. However, for SiGe/Si multiple-quantum-well structures grown on bulk Si, the lattice mismatch between Si and Ge limits the critical thickness for dislocation formation and thus the number of periods that can be grown. Similarly, the use of composition-graded SiGe films as a lattice-matched substrate leads to the transfer of dislocations from the graded buffer substrate into the quantum wells, with a consequent decrease in light emission efficiency. Here we instead employ nanomembrane strain engineering to fabricate dislocation-free strain relaxed substrates, with lattice constants that match the average lattice constants of the quantum wells. This procedure allows for the growth of many periods with excellent structural properties. The samples in this work were grown by low-pressure chemical vapor deposition and characterized via high-resolution X-ray diffraction and far-infrared transmission spectroscopy, showing narrow intersubband absorption features indicative of high crystalline quality.
RESUMO
Diffractive arrays of silver nanocylinders are used to increase the radiative efficiency of InGaN/GaN quantum wells emitting at near-green wavelengths. Large enhancements in luminescence intensity (up to a factor of nearly 5) are measured when the array period exceeds the emission wavelength in the semiconductor material. The experimental results and related numerical simulations indicate that the underlying mechanism is a strong resonant coupling between the light-emitting excitons in the quantum wells and the plasmonic lattice resonances of the arrays. These excitations are particularly well suited to light-emission-efficiency enhancement, compared to localized surface plasmon resonances at similar wavelengths, due to their larger scattering efficiency and larger spatial extension across the sample area.
RESUMO
Silicon, germanium, and related alloys, which provide the leading materials platform of electronics, are extremely inefficient light emitters because of the indirect nature of their fundamental energy bandgap. This basic materials property has so far hindered the development of group-IV photonic active devices, including diode lasers, thereby significantly limiting our ability to integrate electronic and photonic functionalities at the chip level. Here we show that Ge nanomembranes (i.e., single-crystal sheets no more than a few tens of nanometers thick) can be used to overcome this materials limitation. Theoretical studies have predicted that tensile strain in Ge lowers the direct energy bandgap relative to the indirect one. We demonstrate that mechanically stressed nanomembranes allow for the introduction of sufficient biaxial tensile strain to transform Ge into a direct-bandgap material with strongly enhanced light-emission efficiency, capable of supporting population inversion as required for providing optical gain.
Assuntos
Engenharia/métodos , Germânio/química , Luz , Membranas Artificiais , Nanoestruturas/química , Simulação por Computador , Modelos Químicos , Análise Espectral Raman , Estresse Mecânico , Resistência à TraçãoRESUMO
Two-dimensional arrays of silver nanocylinders fabricated by electron-beam lithography are used to demonstrate plasmon-enhanced near-green light emission from nitride semiconductor quantum wells. Several arrays with different nanoparticle dimensions are employed, designed to yield collective plasmonic resonances in the spectral vicinity of the emission wavelength and at the same time to provide efficient far-field scattering of the emitted surface plasmons. Large enhancements in peak photoluminescence intensity (up to a factor of over 3) are measured, accompanied by a substantial reduction in recombination lifetime indicative of increased internal quantum efficiency. Furthermore, the enhancement factors are found to exhibit a strong dependence on the nanoparticle dimensions, underscoring the importance of geometrical tuning for this application.
Assuntos
Gálio/química , Índio/química , Luz , Prata/química , Ressonância de Plasmônio de Superfície/métodos , Cor , Eletrônica , Nanopartículas Metálicas/química , Nanotecnologia/métodos , Óptica e Fotônica , Fotoquímica/métodos , Pontos QuânticosRESUMO
The use of intersubband transitions in quantum cascade structures for thermophotovoltaic energy conversion is investigated numerically. The intrinsic cascading scheme, spectral agility, and design flexibility of these structures make them ideally suited to the development of high efficiency multiple-junction thermophotovoltaic detectors. A specific implementation of this device concept is designed, based on bound-to-continuum intersubband transitions in large-conduction-band-offset In(0.7)Ga(0.3)As/AlAs(0.8)Sb(0.2) quantum wells. The device electrical characteristics in the presence of thermal radiation from a blackbody source at 1300 K are calculated, from which a maximum extracted power density of 1.4 W/cm(2) is determined. This value compares favorably with the present state-of-the-art in interband thermophotovoltaic energy conversion, indicating that quantum cascade photodetectors may provide a promising approach to improve energy extraction from thermal sources.
Assuntos
Fontes de Energia Elétrica , Eletrônica/instrumentação , Fotometria/instrumentação , Pontos Quânticos , Desenho Assistido por Computador , Transferência de Energia , Desenho de Equipamento , Análise de Falha de Equipamento , Temperatura Alta , Teoria QuânticaRESUMO
We present the design, fabrication, and characterization of III-nitride quantum-well waveguides optimized for nonlinear-optical switching via intersubband transitions. A dielectric structure consisting of an AlN lower cladding and a GaN cap layer allows minimizing the propagation losses while maintaining a large modal overlap with the quantum-well active layer. A strong nonlinear saturation of the intersubband absorption near 1.55 mum is demonstrated at record low input powers for these materials; in particular, a 3-dB saturation pulse energy of less than 10 pJ with 240-fs pulses is measured. Combined with the well established sub-picosecond recovery lifetimes of intersubband absorption in III-nitride quantum wells, these results are very promising for all-optical switching applications in future ultrafast fiber-optic communication networks.
RESUMO
A fiber-optic pump-probe setup is used to demonstrate all-optical switching based on intersubband cross-absorption modulation in GaN/AlN quantum-well waveguides, with record low values of the required control pulse energy. In particular, a signal modulation depth of 10 dB is obtained with control pulse energies as small as 38 pJ. Such low power requirements for this class of materials are mainly ascribed to an optimized design of the waveguide structure. At the same time, the intersubband absorption fully recovers from the control-pulse-induced saturation on a picosecond time scale, so that these nonlinear waveguide devices are suitable for all-optical switching at bit rates of several hundred Gb/s.