Dentin erosive wear is reduced by fluoride varnishes containing nanosized sodium trimetaphosphate in vitro.

This study evaluated the effect of fluoride varnishes containing micrometric or nanosized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. Bovine root dentin blocks were selected by surface hardness and randomly divided into five experimental groups/varnishes (n = 20/group): placebo, 5% sodium fluoride (NaF); 5% NaF+5% micrometric TMP; 5% NaF+2.5% nanosized TMP; and 5% NaF+5% nanosized TMP. Half of the surface of all blocks received a single application of the assigned varnish, with subsequent immersion in artificial saliva for 6 h. Varnishes were then removed and the blocks were immersed in citric acid (90 s, 4×/day, 5 days). After each erosive cycle, ten blocks of each group were immersed in a placebo dentifrice for 15 s (ERO), while the other ten blocks were subjected to abrasion by brushing (ERO+ABR). Dentin erosive wear was assessed by profilometry. Data were submitted to 2-way ANOVA and to the Holm-Sidak test (p<0.05). Dentin erosive wear was significantly higher for ERO+ABR than for ERO for all varnishes. TMP-containing varnishes promoted superior effects against dentin erosive wear compared with 5% NaF alone; and 5% nanosized TMP led to the lowest wear among all varnishes. In conclusion, the addition of TMP to conventional fluoride varnish (i.e., varnish containing only NaF) enhanced its protective effects against bovine root dentin erosion and erosion+abrasion. Additionally, the use of 5% nanosized TMP led to superior effects in comparison to 5% micrometric TMP, both for erosion and erosion+abrasion in vitro.

Peripheral odontogenic fibroma in a child with Ellis-van Creveld syndrome: Case report.

INTRODUCTION: Ellis-van Creveld (EVC) syndrome is an autosomal recessive disorder predominantly characterized by a disproportionate dwarfism, ectodermal dysplasia, postaxial polydactyly, and congenital heart malformations and pulmonary hypoplasia. OBJECTIVE: In this article, we hereby present a case of a 6-year-old Brazilian boy with EVC syndrome who presented a rare oral lesion as well as a remarkable number of classical and uncommon oral and dental features. CASE REPORT: Clinical and radiographic examination revealed multiple enamel hypoplasia, teeth agenesis, conical teeth, lower canine rotation, bilateral posterior crossbite, taurodontism of deciduous and permanent molars and delayed tooth eruption, dental caries, and absent vestibular sulcus. Additionally, a whitish lobulated nodule located in the alveolar ridge in the anterior region of the mandible was noted. Anatomopathological examination was compatible with the diagnosis of peripheral odontogenic fibroma (POF). In a 10-month clinical follow-up, no signs of recurrence were observed. CONCLUSION: In view of the characteristic oral findings of EVC syndrome and the potential for recurrence of POF, the pediatric dentist plays an essential role in clinical follow-up, planning and preventive, and rehabilitative treatment.

Dentin erosive wear is reduced by fluoride varnishes containing nanosized sodium trimetaphosphate in vitro

Abstract This study evaluated the effect of fluoride varnishes containing micrometric or nanosized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. Bovine root dentin blocks were selected by surface hardness and randomly divided into five experimental groups/varnishes (n = 20/group): placebo, 5% sodium fluoride (NaF); 5% NaF+5% micrometric TMP; 5% NaF+2.5% nanosized TMP; and 5% NaF+5% nanosized TMP. Half of the surface of all blocks received a single application of the assigned varnish, with subsequent immersion in artificial saliva for 6 h. Varnishes were then removed and the blocks were immersed in citric acid (90 s, 4×/day, 5 days). After each erosive cycle, ten blocks of each group were immersed in a placebo dentifrice for 15 s (ERO), while the other ten blocks were subjected to abrasion by brushing (ERO+ABR). Dentin erosive wear was assessed by profilometry. Data were submitted to 2-way ANOVA and to the Holm-Sidak test (p<0.05). Dentin erosive wear was significantly higher for ERO+ABR than for ERO for all varnishes. TMP-containing varnishes promoted superior effects against dentin erosive wear compared with 5% NaF alone; and 5% nanosized TMP led to the lowest wear among all varnishes. In conclusion, the addition of TMP to conventional fluoride varnish (i.e., varnish containing only NaF) enhanced its protective effects against bovine root dentin erosion and erosion+abrasion. Additionally, the use of 5% nanosized TMP led to superior effects in comparison to 5% micrometric TMP, both for erosion and erosion+abrasion in vitro.

Fluoride varnishes supplemented with nano-sized sodium trimetaphosphate reduce enamel erosive wear in vitro.

OBJECTIVE: To evaluate the effect of fluoride (F) varnishes with sodium trimetaphosphate (TMP) on erosive tooth wear (ETW) in vitro. METHODS: Enamel blocks (n = 100) were divided into 5 experimental groups (n = 20/group): Placebo (Pla - without F/TMP); 5 % NaF (NaF); 5 % NaF + 5 % micrometric TMP (NaF+5 %MICRO); 5 % NaF + 2.5 % nano-sized TMP (NaF+2.5 %NANO), and 5 % NaF + 5 % nano-sized TMP (NaF+5 %NANO). Blocks received a single varnish application (6 h contact), and were submitted to 4 daily erosive challenges (ERO, 0.05 M citric acid, pH 3.2, 90 s, under agitation), for 5 days. After ERO, half of the blocks (n = 10/group) were subjected to brushing abrasion (ERO+ABR). Profilometry, surface hardness (SH), and cross-sectional hardness (ΔKHN) were determined. The data were submitted to 2-way ANOVA and Fisher's LSD test (p < 0.05). RESULTS: Enamel wear was significantly lower for ERO compared with ERO+ABR for all varnishes tested (p < 0.001), following the pattern NaF+5 %NANO < NaF+5 %MICRO < NaF < NaF+2.5 %NANO < Pla (both for ERO and ERO+ABR). The highest SH loss was observed for Pla and the lowest for NaF (ERO) and NaF+2.5 %NANO (ERO+ABR), without significant differences among NaF+2.5 %NANO, NaF, and NaF+5 %MICRO. The highest ΔKHN values were observed for NaF+5 %MICRO and NaF+5 %NANO at 5-30 µm, with less marked differences among the groups at 30-70 µm (ERO and ERO+ABR). CONCLUSIONS: The addition of TMP to F varnishes significantly improves protection against ETW in vitro. The use of 5 % nano-sized TMP further enhances such effects. CLINICAL SIGNIFICANCE: F varnishes containing TMP can reduce enamel loss caused by ERO or ERO+ABR.

Maternal methylmercury exposure during early-life periods adversely affects mature enamel structure of offspring rats at human exposure levels: a concern for oral health.

Although there are many studies on the health effects of methylmercury (MeHg) toxicity during in utero and early development, little is known about its effects on mineralized tissues present in the oral cavity, such as enamel structure. Therefore, this study evaluated the effects of MeHg exposure on the physico-chemical, ultrastructural and functional properties of mature tooth enamel. Specifically, we studied offspring of mothers exposed to MeHg during the prenatal and postnatal periods which are the developmental stages associated with tooth enamel formation. Female rats were exposed to MeHg at a dose of 40 µg/kg/day for 42 days of pregnancy and lactation. The enamel of offspring was analyzed by (1) Fourier Transform Infrared Spectroscopy and Raman to assess physicochemical composition, (2) Scanning Electron Microscopy for ultrastructural evaluation, (3) Transmitted Polarizing Light Microscopy for analysis of the enamel extracellular matrix, and (4) resistance and hardness were evaluated by microhardness. The results showed that MeHg exposure during this sensitive enamel formation period induced changes in inorganic and organic content and enamel prisms ultrastructure alterations and disturbed the organic extracellular matrix due to a decreased enamel strength. These novel findings establish for the first time that maternal exposure to MeHg pre and postnatal promoted relevant changes in mature enamel of their offspring rats.

Amount of Dentifrice and Fluoride Concentration Influence Salivary Fluoride Concentrations and Fluoride Intake by Toddlers.

The present study evaluated fluoride (F) concentrations in saliva of toddlers after brushing with dentifrices containing different F concentrations, applied in different quantities, and estimated F intake from toothbrushing. The study comprised a double-blind, crossover protocol, in which toddlers (n = 18, 2-3 years old) were randomly assigned into six groups, according to possible combinations of dentifrices (0/550/1,100 ppm F, as NaF) and amounts (rice grain, pea size, and transverse technique). Volunteers used a F-free dentifrice during 1 week. On the 7th day, saliva samples were collected before (baseline), and at 5/15/30/60 min after toothbrushing. All dentifrice expectorated after brushing was collected. F concentrations (saliva and expectorate) were determined with an ion-specific electrode. Data were submitted to ANOVA or Kruskal-Wallis test, followed by Fisher's LSD or Student-Newman-Keuls' tests (p <0.05). Brushing with 550 ppm F dentifrice (pea size or transversal technique) increased the area under the curve (AUC) at similar levels compared to 1,100 ppm F (rice grain). The highest AUC and salivary F at 5 min after brushing were achieved by 1,100 ppm F (pea size), followed by 550 ppm F (transversal technique). Regarding F intake, the highest values were observed for 550 ppm F (transversal technique), followed by 1,100 ppm F (pea size). It is possible to conclude that the amount of dentifrice and F concentration in the product significantly affected both salivary F concentrations and F intake during toothbrushing.

Efeito de vernizes fluoretados suplementados com nanopartículas de trimetafosfato de sódio sobre o desgaste dental erosivo in vitro e in situ / Effect of fluoride varnishes supplemented with nanosized Sodium Trimetaphosphate on enamel erosive wear in vitro and in situ

O presente estudo avaliou o efeito de vernizes fluoretados suplementados com nanopartículas de Trimetafosfato de Sódio (TMP) sobre o desgaste erosivo do esmalte dental bovino, em protocolos in vitro e in situ. Para a 1ª fase, blocos de esmalte dental bovino (n=100) foram selecionados por meio de dureza de superfície (DS) e aleatoriamente divididos em 5 grupos experimentais (n=20/grupo), de acordo com os vernizes testados: (a) Placebo (Pla - sem F ou TMP), (b) 5% NaF, (c) 5% NaF + 5% TMP microparticulado (5% Micro), (d) 5% NaF + 2,5% TMP nanoparticulado (2,5% Nano), (e) 5% NaF + 5% TMP nanoparticulado (5% Nano). Os blocos receberam uma única aplicação dos vernizes e foram imersos em saliva artificial por 6 h. Em seguida, os vernizes foram removidos e todos os blocos, submetidos a 4 desafios erosivos diários durante 5 dias (ERO, imersão em ácido cítrico 0,05 M, pH 3,2, 90 s/ciclo, sob agitação). Após ERO, metade dos blocos foi submetida a abrasão por escovação (15 s/ciclo) com dentifrício placebo (ERO+ABR). Os blocos foram analisados por perfilometria, dureza de superfície (DS) e dureza em secção longitudinal (ΔKHN). Os dados foram submetidos a ANOVA a dois critérios e Teste de Fisher LSD (p< 0,05). O desgaste do esmalte foi significativamente menor para ERO comparado a ERO+ABR para todos os vernizes testados (p< 0,001), seguindo o padrão 5% Nano < 5% Micro < 5% NaF < 2,5% Nano < Pla (ERO e ERO+ABR). A maior perda de DS foi observada para o Pla e a menor para 5% NaF (ERO) e 2,5% Nano (ERO+ABR), sem diferenças significativas entre 2,5% Nano, 5% NaF e 5% Micro. Os maiores valores de ΔKHN foram observados para 5% Micro e 5% Nano a 5-30 µm, com diferenças menos acentuadas entre os grupos a 30-70 µm (ERO e ERO+ABR). Para a 2ª fase, blocos de esmalte bovino (n=224) foram selecionados por DS e distribuídos aleatoriamente entre os grupos: (a) Placebo (Pla - sem F ou TMP), (b) 5% NaF, (c) 5% NaF + 5% TMP microparticulado (5% Micro), e (d) 5% NaF + 5% TMP nanoparticulado (5% Nano). Os blocos foram inseridos em dispositivos acrílicos palatinos (n=4/dispositivo), e tratados com os vernizes uma única vez, permanecendo na cavidade bucal dos voluntários (n=14) por 6 h. Em seguida, os vernizes foram removidos e os blocos, submetidos à ERO (imersão ex vivo em ácido cítrico 0,05 M, pH 3,2, 90 s, 4x/dia), enquanto dois blocos foram adicionalmente submetidos a abrasão por escovação com dentifrício fluoretado (ERO+ABR), totalizando 5 dias em cada etapa experimental, seguindo um protocolo duplo-cego e cruzado. As análises dos blocos e dos dados foram idênticas às da 1ª fase. Os valores do desgaste seguiram um padrão similar em ambas as condições experimentais (ERO ou ERO+ABR), com 5% Nano < 5% Micro < 5% NaF < Pla. Um padrão similar foi observado para dureza em secção longitudinal (ΔKHN), apesar de não serem verificadas diferenças significativas entre 5% Micro×5% Nano (5-30 µm). Quanto à perda de DS, o maior valor foi observado para Pla e o menor para 5% Nano (ERO ou ERO+ABR), sem diferenças significativas entre Pla×5% NaF (ERO), 5% NaF×5% Micro (ERO+ABR), e 5% Micro×5% Nano (ERO+ABR). Diante dos resultados, conclui-se que a adição de TMP a vernizes fluoretados melhorou significativamente a proteção contra o desgaste erosivo do esmalte in vitro e in situ. O uso de 5% de TMP em escala nanométrica aumentou ainda mais esses efeitos(AU)

The present study evaluated the effect of fluoride (F) varnishes supplemented with sodium trimetaphosphate (TMP) nanoparticles on erosive tooth wear, using in vitro and in situ protocols. For the first phase, bovine enamel blocks (n=100) were selected by surface hardness (SH) and randomly divided into 5 experimental groups (n=20/group), according to the varnishes tested: (a) Placebo (Pla - without F or TMP), (b) 5% NaF, (c) 5% NaF + 5% micrometric TMP (5% Micro), (d) 5% NaF + 2.5% nano-sized TMP (2.5% Nano), (e) 5% NaF + 5% nano-sized TMP (5% Nano). Blocks received a single varnish application, and were immersed in artificial saliva for 6 h. Varnishes were then removed and all blocks, subjected to 4 daily erosive challenges during for 5 days (ERO, immersion in 0.05 M citric acid, pH 3.2, 90 s/cycle, under agitation). After ERO, half of the blocks were subjected to abrasion by brushing (15 s/cycle) with placebo dentifrice (ERO+ABR). Blocks were analyzed by profilometry, surface hardness (SH) and cross-sectional hardness (ΔKHN). The data were submitted to 2-way ANOVA and Fisher's LSD test (p< 0.05). Enamel wear was significantly lower for ERO compared to ERO+ABR for all varnishes tested (p< 0.001), following the pattern 5% Nano < 5% Micro < 5% NaF < 2.5% Nano < Pla (ERO and ERO+ABR). The highest SH loss was observed for Pla, and the lowest for 5% NaF (ERO) and 2.5% Nano (ERO+ABR), without significant differences between 2.5% Nano, 5% NaF and 5% Micro. The highest values of ΔKHN were observed for 5% Micro and 5% Nano at 5-30 µm, with less marked differences between the groups at 30-70 µm (ERO and ERO+ABR). In the second phase, bovine enamel blocks (n=224) were selected by SH and randomly distributed among the groups: (a) Placebo (Pla - without F or TMP), (b) 5% NaF, (c) 5% NaF + 5% micrometric TMP (5% Micro), and (d) 5% NaF + 5% nano-sized TMP (5% Nano). The blocks were inserted in acrylic palatal devices (n=4/device), and treated with the varnishes only once, remaining in the oral cavity of the volunteers (n=14) for 6 h. Then, the varnishes were removed and the blocks, subjected to ERO (ex vivo immersion in 0.05 M citric acid, pH 3.2, 90 s, 4x/ day), while two blocks were additionally subjected to abrasion by brushing with fluoride dentifrice (ERO+ABR), totaling 5 days in each experimental stage, following a double-blind, crossover protocol. The blocks and the data were analyzed as described for the first phase. The wear values followed a similar pattern under both experimental conditions (ERO or ERO+ABR), with 5% Nano < 5% Micro < 5% NaF < Pla. A similar pattern was observed for hardness in depth (ΔKHN), although no significant differences were found between 5% Micro×5% Nano (5-30 µm). As for SH loss, the highest value was observed for Pla, and the lowest for 5% Nano (ERO or ERO+ABR), without significant differences between Pla×5% NaF (ERO), 5% NaF×5% Micro (ERO+ABR), and 5% Micro×5% Nano (ERO + ABR). In view of the results, it was concluded that the addition of TMP to fluoride varnishes significantly improved protection against erosive enamel wear in vitro and in situ. The use of 5% nano-sized TMP further increased these effects(AU)