First Report of Powdery Mildew Caused by Podosphaera xanthii on Sphagneticola trilobata in Hainan Province, China.

Sphagneticola trilobata (L.) Pruski is a perennial creeping herb of the Asteraceae family, which is native to South America. It was introduced into Southern China as a groundcover in the 1970s (Zhang et al. 2023). Now it is mainly used for folk medicine to treat various kinds of inflammatory, incuding joint pain, rheumatic diseases, arthritis, in addition to treating persistent wounds, ulcers, and edemas (Gonçalves et al. 2022). In February and November 2023, powdery mildew symptoms were observed on 60% of S. trilobata plants on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped. Conidiophores (n =30) were unbranched, cylindrical, 74 to 161 × 10 to 14 µm, and produced three to five immature conidia in chains with a crenate outline. Foot cells (n =30) were cylindrical, straight or sometimes curved at the base, and 27 to 56 µm long. Conidia (n =100) were ellipsoid-ovoid to doliiform, 17 to 30 ×14 to 28 µm (length/width ratio = 1.1 to 1.9), with well-developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, the pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMST-23. To confirm the genus identification and ascertain a putative species, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 577-bp sequence was deposited in GenBank (accession no. OR784549). A BLASTn search in GenBank of this sequence showed 100% similarity with the ITS sequences of P. xanthii isolates from China (MT260063, MN203658, OP765400, and MT739423), Thailand (LC270780), and Vietnam (KM260731, KM260730, and KR779870). Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O´Donnell 1993; accession no. OR784550). This region shared 100% similarity with P. xanthii isolates (LC371334, LC270782, AB936277, and OP765401) as well. Powdery mildew from Hainan sample belonged to the P. xanthii group with strong bootstrap values support 99% in maximum likelihood phylogenetic tree based on ITS and 28S gene sequences. To confirm pathogenicity, five healthy potted plants of S. trilobata were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as P. xanthii. In different countries and regions, P. xanthii has been previously reported on S. trilobata in Taiwan (Yeh et al. 2021). To our knowledge, this is the first record of P. xanthii infecting S. trilobata in Hainan Province, China. S. trilobata is often planted as an ornamental plant on both sides of the road, and we are concerned that it may serve as a new host, spreading this pathogen to other economic crops.

First Report of Powdery Mildew Caused by Podosphaera xanthii on Acalypha indica in China.

Acalypha indica L. is an annual erect herb of the Euphorbiaceae family. This plant is found widely in the tropics and parts of Africa and Asia (Chakraborty et al. 2023). In China, A. indica is a vegetable and also used as a folk medicine due to its antipyretic and hemostatic, antibacterial and anti-inflammatory properties. In February 2022 and 2023, powdery mildew symptoms were observed on 70% of A. indica plants on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped. Conidiophores (n =30) were unbranched, cylindrical, 66 to 150 × 10 to 15 µm, and produced three to five immature conidia in chains with a crenate outline. Foot cells (n =30) were cylindrical, straight or sometimes curved at the base, and 31 to 59 µm long. Conidia (n =100) were ellipsoid-ovoid to doliiform, 20 to 33 ×12 to 20 µm (length/width ratio = 1.3 to 2.4), with well-developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, the pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMAI-23. To confirm the genus identification and ascertain a putative species, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 575-bp sequence was deposited in GenBank (accession no. OR775733). A BLASTn search in GenBank of this sequence showed 99% similarity with the ITS sequences of P. xanthii on plants of Fabaceae, Malvaceae and Cucurbitaceae family from China (MH143485, MT242593, MK439611 and MH143483), Thailand (LC270779 and LC270778), Korea (MG754404), Vietnam (KM260704), and Puerto Rico (OP882310). Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O´Donnell 1993; accession no. OR784547). This region shared 99% similarity with P. xanthii isolates (LC371333, LC270780, AB936277, and OP765401) as well. To confirm pathogenicity, five healthy potted plants of A. indica were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as P. xanthii. In different countries and regions, P. xanthii has been previously reported on A. indica from Sudan and India (Amano 1986). To our knowledge, this is the first record of P. xanthii infecting A. indica in China. We are concerned that the pathogen could become a threat to the widespread planting of A. indica in the future.

First Report of Powdery Mildew Caused by Podosphaera xanthii on Youngia japonica subsp. elstonii in Hainan Province, China.

Youngia japonica (L.) DC. is a polymorphic annual herb of the Asteraceae family. Although this plant originated in Asia, it is now world-widely distributed. In China, Y. japonica is used for edible or folk medicine to treat viral infections and various kinds of inflammation (Yu et al. 2021). As a traditional Chinese medicinal herb, Y. japonica used for the treatment of inflammatory diseases, such as angina, leucorrhea, mastitis, conjunctivitis, and rheumatoid arthritis (Chen et al. 2006). During the spring of 2023, powdery mildew symptoms were observed on 60% of Y. japonica subsp. elstonii plants in a greenhouse on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped. Conidiophores (n =30) were unbranched, cylindrical, 99 to 166 × 11 to 16 µm, and produced three to five immature conidia in chains with a crenate outline. Foot cells (n =30) were cylindrical, straight or sometimes curved at the base, and 35 to 61 µm long. Conidia (n =100) were ellipsoid-ovoid to doliiform, 21 to 40 ×13 to 21 µm (length/width ratio = 1.4 to 2.3), with well-developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, the pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMYJ-23. To confirm the genus identification and ascertain a putative species, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 575-bp sequence was deposited in GenBank (accession no. OR229712). A BLASTn search in GenBank of this sequence showed 99% similarity with the ITS sequences of P. xanthii isolates from China (MT260063, OP765400, MW422608, and MT739423), Thailand (LC270778, LC270779, and LC270780), and Argentina (AB525914). Additionally, the 613-bp 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O'Donnell 1993; accession no. OR240257). This region shared 100% similarity with P. xanthii isolates (MK357436, LC371333, LC270780, OP765401, and AB936277) as well. To confirm pathogenicity, five healthy potted plants of Y. japonica subsp. elstonii were inoculated by gently pressing a powdery mildew-infected leaf onto the young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as P. xanthii. To our knowledge, this is the first record of P. xanthii infecting Y. japonica subsp. elstonii in Hainan province, China. We are concerned that the pathogen could become a threat to the widespread planting of Y. japonica subsp. elstonii in the future.

First Report of Powdery Mildew Caused by Podosphaera xanthii on Phasey Bean (Macroptilium lathyroides) in China.

The forage legume phasey bean Macroptilium lathyroides (L.) Urb. is an annual or short-lived perennial of the family Fabaceae. It is native to the tropical and subtropical areas from North to South America, and is naturalized throughout the tropics and subtropics of the world (Tobisa and Nakano 2019). It is mainly used for forage, green manure, and slope protection (Silva et al. 2018). In addition, the nitrogen fixation ability of this plant can also improve the soil. In February 2022 and January 2023, powdery mildew symptoms were observed on 70% of M. lathyroides plants on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped. Conidiophores (n =30) were unbranched, cylindrical, 100 to 233 × 8 to 15 µm, and produced three to five immature conidia in chains with a crenate outline. Foot cells (n =30) were cylindrical, straight or sometimes curved at the base, and 36 to 56 µm long. Conidia (n =100) were ellipsoid-ovoid to doliiform, 24 to 34 ×13 to 20 m (length/width ratio = 1.5 to 2.3), with well-developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, the pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMML-23. To confirm the identification, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 575-bp sequence was deposited in GenBank (accession no. OR240256). A BLASTn search in GenBank of this sequence showed 100% similarity with the ITS sequences of P. xanthii isolates from China (MT242593, MK439611 and MH143483), Korea (MG754404), Vietnam (KM260704), Japan (MZ604267), and Puerto Rico (OP882310). Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O´Donnell 1993; accession no. OR240255). This region shared 100% similarity with P. xanthii isolates (MK357436, LC371333, OP765401, and MZ604267) as well. To confirm pathogenicity, five healthy potted plants of M. lathyroides were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as P. xanthii. This fungus has been reported causing powdery mildew on M. atropurpureum in Thailand (Meeboon et al. 2016). In the United States phasey bean powdery mildew caused by Erysiphe fallax has been previously reported (Poudel and Zhang 2019). To our knowledge, this is the first record of P. xanthii infecting M. lathyroides in China. Over the past 50 years of introduction, phasey bean has become one of the main leguminous forages for establishing artificial mixed seeding grasslands in southern China. We are concerned that the pathogen could become a threat to the widespread planting of M. lathyroides in the future.

First Report of Powdery Mildew Caused by Podosphaera xanthii on Vernonia cinerea in China.

Vernonia cinerea (L.)Less. is an annual herbaceous plant of the Asteraceae family, which is widely distributed throughout Southeast Asia, India, and the tropical and subtropical regions of China. This herb is known to contain various bioactive compounds and is commonly used in traditional system of medicine in China and India (Singh et al. 2021). During the spring of 2022 and 2023, powdery mildew symptoms were observed on 70% of V. cinerea plants on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped. Conidiophores (n =30) were unbranched, cylindrical, 104 to 188 × 11 to 15 µm, and produced three to five immature conidia in chains with a crenate outline. Foot cells (n =30) were cylindrical, straight or sometimes curved at the base, and 32 to 57 µm long. Conidia (n =100) were ellipsoid-ovoid to doliiform, 19 to 45 ×16 to 26 m (length/width ratio = 1.2 to 2.4), with well-developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, the pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMVC-22. To confirm the genus identification and ascertain a putative species, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 577-bp sequence was deposited in GenBank (accession no. OP765400). A BLASTn search in GenBank of this sequence showed 100% similarity with the ITS sequences of P. xanthii isolates from China (MT260063, MT739423 and MT131253), Thailand (LC270780), and Vietnam (KM260731). Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O´Donnell 1993; accession no. OP765401). This region shared 100% similarity with P. xanthii isolates (LC371333, LC270780, and AB936277) as well. Powdery mildew from Hainan sample belonged to the P. xanthii group with strong bootstrap values support 99% in maximum likelihood phylogenetic tree based on ITS and 28S gene sequences. To confirm pathogenicity, five healthy potted plants of V. cinerea were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as P. xanthii. In different countries and regions, Erysiphe cichoracearum has been previously reported on some Vernonia species, including V. Galamensis from southern parts of Ethiopia (Hundesa and Mekonnen 2017). To our knowledge, this is the first record of P. xanthii infecting V. cinerea in China. We are concerned that the pathogen could become a threat to the widespread planting of V. cinerea in the future.

Synthesis of F-doped materials and applications in catalysis and rechargeable batteries.

Elemental doping is one of the most essential techniques for material modification. It is well known that fluorine is considered to be a highly efficient and inexpensive dopant in the field of materials. Fluorine is one of the most reactive elements with the highest electronegativity (χ = 3.98). Compared to cationic doping, anionic doping is another valuable method for improving the properties of materials. Many materials have physicochemical limitations that affect their practical application in the field of catalysis and rechargeable ion batteries. Many researchers have demonstrated that F-doping can significantly improve the performance of materials for practical applications. This paper reviews the applications of various F-doped materials in photocatalysis, electrocatalysis, lithium-ion batteries, and sodium-ion batteries, as well as briefly introducing their preparation methods and mechanisms to provide researchers with more ideas and options for material modification.

Universal, Rapid, and Visual Detection Methods for Phytoplasmas Associated with Coconut Lethal Yellowing Diseases Targeting 16S rRNA Gene Sequences.

Coconut lethal yellowing (LY) diseases caused by phytoplasmas are devastating diseases for coconut cultivation and seriously threaten the coconut industry around world. The phytoplasmas associated with the LY diseases belonged to six 16Sr groups containing 16SrI, 16SrIV, 16SrXI, 16SrXIV, 16SrXXII, and 16SrXXXII with comparatively higher variable levels. Conserved regions of the 16S rRNA genes of LY phytoplasmas belonging to the six 16Sr groups were obtained in the study. Based on the conserved region sequences of 16S rRNA genes, two sets of LAMP primers, Co-4 and Co-6, were designed and screened, and the rapid and visual detection methods universal for different groups LY phytoplasmas were established. The entire detection reactions of the universal detection methods could be completed with only 30 to 40 min of constant temperature amplification at 64°C, and the detection results were judged by the color changes of the reaction systems, which are convenient and quick. For the six groups of phytoplasmas, the estimated minimum detection limit range of the universal detection primers Co-4 and Co-6 were identical: 4.8 × 101 to 4.8 × 107 copies per 200 µl. The universal detection methods for the LY phytoplasmas established in the study are of great significance for the rapid diagnosis and identification and the efficient monitoring and early warning as well as the port inspection and quarantine of the LY phytoplasmas and their related diseases.

TiO2 Gas Sensors Combining Experimental and DFT Calculations: A Review.

Gas sensors play an irreplaceable role in industry and life. Different types of gas sensors, including metal-oxide sensors, are developed for different scenarios. Titanium dioxide is widely used in dyes, photocatalysis, and other fields by virtue of its nontoxic and nonhazardous properties, and excellent performance. Additionally, researchers are continuously exploring applications in other fields, such as gas sensors and batteries. The preparation methods include deposition, magnetron sputtering, and electrostatic spinning. As researchers continue to study sensors with the help of modern computers, microcosm simulations have been implemented, opening up new possibilities for research. The combination of simulation and calculation will help us to better grasp the reaction mechanisms, improve the design of gas sensor materials, and better respond to different gas environments. In this paper, the experimental and computational aspects of TiO2 are reviewed, and the future research directions are described.

First Report of Powdery Mildew Caused by Golovinomyces sonchicola on Sonchus wightianus in China.

Sonchus wightianus DC. is a perennial plant of the Asteraceae family, which is native to Nepal (Veena et al. 2021). In China, S. wightianus is distributed throughout Hainan Province and is commonly used for edible and medicinal purposes. During the spring of 2021 and 2022, powdery mildew symptoms were observed on 70% of S. wightianus plants on the Hainan Medical University campus (19° 58' 53″ N; 110° 19' 47″ E) in Haikou, Hainan Province, China. Powdery mildew colonies covered the leaf surfaces and stems of affected plants, causing discoloration and defoliation. Mycelia were superficial and hyphal appressoria were nipple-shaped, single or in pairs. Conidiophores (n =30) were unbranched, 81 to 209 × 15 to 19 µm. Foot cells (n =30) were cylindrical, straight or curved at the base, 14 to 78 µm long, followed by one to three shorter cells, and formed conidia in chains. Conidia (n =100) were ellipsoid to doliiform-cylindrical, 27 to 39 ×12 to 19 m (length/width ratio = 1.5 to 2.6), lacked fibrosin bodies, and produced germ tubes at their termini. The Eudoidium-type of conidial germination with a short germ tube was observed. Based on these morphological characteristics, the pathogen resembled Golovinomyces sp. (Braun and Cook 2012). The teleomorph was not observed. A specimen was deposited in the Hainan Medical University Plant Pathology Herbarium as HMSW-21. To confirm the genus identification and ascertain a putative species, genomic DNA was extracted from mycelium, conidiophores, and conidia using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region was amplified with primers ITS1/ITS4 (White et al. 1990) and sequenced directly. The resulting 607 bp sequence was deposited in GenBank (accession no. ON365772). A BLASTn search in GenBank of this sequence showed ≥99% similarity with the ITS sequences of G. sonchicola isolates from Mexico (MW425872), Slovenia (MK318522), and the United Kingdom (KY660772). Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O´Donnell 1993; accession no. ON365785). This region shared 99% similarity with published G. sonchicola isolates (OM265397 and AB077624) as well. To confirm pathogenicity, five healthy potted plants of S. wightianus were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity, with a 16-h photoperiod. After 7 days, inoculated leaves showed powdery mildew symptoms whereas no symptoms were observed on control plants. The fungal colonies observed on inoculated plants were morphologically identical to those found on the originally infected leaves collected from Hainan Province. Based on the morphological characteristics and molecular identification, the fungus was identified as G. sonchicola. In different countries and regions, G. sonchicola has been previously reported on some Sonchus species, including S. oleraceus from Mexico (Beltrán-Peña et al. 2021) and Slovenia (Jakse et al. 2019), and S. asper in the United Kingdom. To our knowledge, this is the first record of G. sonchicola infecting S. wightianus in China. We are concerned that the pathogen could become a threat to the widespread planting of S. wightianus in the future.

Synthesis of MoS2-based nanostructures and their applications in rechargeable ion batteries, catalysts and gas sensors: a review.

Molybdenum disulfide (MoS2) is a two-dimensional (2D) layered material with a graphene-like structure that has attracted attention because of its large specific surface area and abundant active sites. In addition, the compounding of MoS2 with other materials can enhance the performance in applications such as batteries, catalysts, and optoelectronic devices, etc. MoS2 is prepared by various methods, among which chemical deposition and hydrothermal methods are widely used. In this review, we focus on summarizing the applications of MoS2 and MoS2 composite nanomaterials in rechargeable ion batteries, catalysts for water splitting and gas sensors, and briefly outline the preparation methods.

First Report of Powdery Mildew Caused by Podosphaera xanthii on Ixeris denticulata in China.

Ixeris denticulata (Houtt.) Stebb is an annual herbaceous plant in the family of Asteraceae, which is native to Europe or central Asia. This plant is widely distributed in China and is commonly used for edible and medicinal purposes. In February 2019, typical symptoms of powdery mildew were observed on 70% of I. denticulata plants on the campus of Hainan University (20° 3' 25″ N; 110° 19' 4″ E) in Haikou, Hainan Province, China. White, superficial mycelia and conidia covered the leaf surfaces of affected plants, resulting in leaf curling, discoloration and defoliation. Hyphal appressoria were nipple-shaped, and solitary. Conidiophores were straight, cylindrical, 109 to 259 × 9 to 16 µm (n = 50), and produced 3 to 5 immature conidia in chains with a crenate outline. Foot cells were cylindrical, straight or sometimes constricted at the basal septum, 30 to 62 µm long (n = 100). Conidia were ellipsoid-ovoid to doliiform, 23 to 33 × 15 to 23 µm (n = 100) with a length/width ratio of 1.1 to 1.9, with well developed fibrosin bodies, and produced germ tubes from the lateral position. Based on these morphological characteristics, this pathogen was provisionally identified as Podosphaera xanthii (Braun and Cook 2012). The teleomorph was not detected. A specimen was deposited in the Hainan University Plant Pathology Herbarium as HNID-18. In order to confirm the identification, genomic DNA was extracted from mycelium and conidia collected from a single leaf using a fungal DNA kit (Omega Bio-Tek, USA). The rDNA internal transcribed spacer (ITS) region and 28S rDNA were amplified with the primer pairs ITS1 and ITS4 (White et al. 1990) and sequenced directly. The resulting 577-bp sequence was deposited in GenBank (Accession No. MT739423). The GenBank BLAST analysis of the ITS sequence showed 100% similarity with P. xanthii on Bidens sp. from Thailand (LC270780), as well as with P. xanthii from Eclipta prostrata (MT260063) and Cyanthillium cinereum (MN203658) from China. Additionally, the 28S rDNA region was amplified using the primer pairs NL1 and NL4 (O'Donnell 1993, Accession No. MT739424). The amplicon was sequenced in both directions and shared 100% similarity with P. xanthii (MK357436, LC371333 and MH137264). To fulfill Koch's postulates, five healthy potted plants of I. denticulata were inoculated by gently pressing a powdery mildew-infected leaf onto 15 young leaves. Five non-inoculated plants served as controls. All plants were maintained in a greenhouse at 24 to 30°C, 70% relative humidity and a 16-h photoperiod. After 7 days, inoculated leaves showed signs and symptoms of powdery mildew whereas no signs or symptoms were observed on the control plants. The fungus observed on the inoculated plants was identical morphologically to that on the originally infected leaves. Powdery mildew of I. chinensis caused by Golovinomyces sonchicola has been reported previously from Korea (Choi et al. 2014). Recently, P. xanthii was also shown to infect Ixeridium dentatum in Korea (Lee and Nguyen 2018). To our knowledge, this is the first record of P. xanthii infecting I. denticulata in China. We are concerned that the pathogen will cause severe damage and affect the yield and quality of the host, and even pose a threat to I. denticulata in the future.

Inducible expression of human angiostatin by AOXI promoter in P. pastoris using high-density cell culture.

A high-density cell culture method was successfully established in P. pastoris with the alcohol oxidase I (AOXI) promoter in order to produce large quantities of recombinant human angiostatin (AS) which has been reported to have antiangiogenic activity. A preliminary study on fermentation conditions in shaking flasks indicated that adequacy of biomass is beneficial to obtain more products. The fermentation was carried out in a 10 l bioreactor with 5 l modified growth medium recommended by Invitrogen at 30 degrees C. The cells were first grown in glycerol-PTM4 trace salts for 24 h. When the cell density reached A(600) = 125, methanol-PTM4 trace salts was added to induce the expression of AS. During the fermentation, dissolved oxygen level was maintained at 20-30%, pH was controlled at 5 by the addition of 7 M NH(4)OH and the biomass was maintained at about A(600) = 200. After 60 h of induction, the secreted AS was 153 mg/l. The recombinant AS inhibited the angiogenesis on CAM and suppressed the growth of B16 melanoma in C57BL/6J mice (P \0.01).

Recent advances on the GAP promoter derived expression system of Pichia pastoris.

Pichia pastoris is an efficient host for the expression and secretion of heterologous proteins and the most important feature of P. pastoris is the existence of a strong and tightly regulated promoter from the alcohol oxidase I (AOX1) gene. The AOX1 promoter (pAOX1) has been used to express foreign genes and to produce a variety of recombinant proteins in P. pastoris. However, some efforts have been made to develop new alternative promoters to pAOX1 to avoid the use of methanol. The glyceraldehyde-3-phosphate dehydrogenase promoter (pGAP) has been used for constitutive expression of many heterologous proteins. The pGAP-based expression system is more suitable for large-scale production because the hazard and cost associated with the storage and delivery of large volume of methanol are eliminated. Some important developments and features of this expression system will be summarized in this review.