Electrically Tunable, Rapid Spin-Orbit Torque Induced Modulation of Colossal Magnetoresistance in Mn3Si2Te6 Nanoflakes.

As a quasi-layered ferrimagnetic material, Mn3Si2Te6 nanoflakes exhibit magnetoresistance behavior that is fundamentally different from their bulk crystal counterparts. They offer three key properties crucial for spintronics. First, at least 106 times faster response compared to that exhibited by bulk crystals has been observed in current-controlled resistance and magnetoresistance. Second, ultralow current density is required for resistance modulation (∼5 A/cm2). Third, electrically gate-tunable magnetoresistance has been realized. Theoretical calculations reveal that the unique magnetoresistance behavior in the Mn3Si2Te6 nanoflakes arises from a magnetic field induced band gap shift across the Fermi level. The rapid current induced resistance variation is attributed to spin-orbit torque, an intrinsically ultrafast process (∼nanoseconds). This study suggests promising avenues for spintronic applications. In addition, it highlights Mn3Si2Te6 nanoflakes as a suitable platform for investigating the intriguing physics underlying chiral orbital moments, magnetic field induced band variation, and spin torque.

Room-Temperature Magnetic Phase Transition in an Electrically Tuned van der Waals Ferromagnet.

Finding tunable van der Waals (vdW) ferromagnets that operate at above room temperature is an important research focus in physics and materials science. Most vdW magnets are only intrinsically magnetic far below room temperature and magnetism with square-shaped hysteresis at room temperature has yet to be observed. Here, we report magnetism in a quasi-2D magnet Cr_{1.2}Te_{2} observed at room temperature (290 K). This magnetism was tuned via a protonic gate with an electron doping concentration up to 3.8×10^{21} cm^{-3}. We observed nonmonotonic evolutions in both coercivity and anomalous Hall resistivity. Under increased electron doping, the coercivities and anomalous Hall effects (AHEs) vanished, indicating a doping-induced magnetic phase transition. This occurred up to room temperature. DFT calculations showed the formation of an antiferromagnetic (AFM) phase caused by the intercalation of protons which induced significant electron doping in the Cr_{1.2}Te_{2}. The tunability of the magnetic properties and phase in room temperature magnetic vdW Cr_{1.2}Te_{2} is a significant step towards practical spintronic devices.

Direct Bandgap-like Strong Photoluminescence from Twisted Multilayer MoS2 Grown on SrTiO3.

While direct bandgap monolayer 2D transition metal dichalcogenides (TMDs) have emerged as an important optoelectronic material due to strong light-matter interactions, their multilayer counterparts exhibit an indirect bandgap resulting in poor photon emission quantum yield. We report strong direct bandgap-like photoluminescence at ∼1.9 eV from multilayer MoS2 grown on SrTiO3, whose intensity is significantly higher than that observed in multilayer MoS2/SiO2. Using high-resolution electron microscopy we observe interlayer twist and >8% increase in the van der Waals gap, which leads to weaker interlayer coupling. This affects the evolution of the band structure in multilayer MoS2 as probed by transient absorption spectroscopy, causing higher photo carrier recombination at the direct gap. Our results provide a platform that could enable multilayer TMDs for robust optical device applications.

Tumor-Activated and Metal-Organic Framework Assisted Self-Assembly of Organic Photosensitizers.

Tumor accumulation and intratumoral singlet oxygen (1O2) generation efficiency of photosensitizers (PSs) are two essential factors that determine their photodynamic therapy (PDT) efficacies. How to maximize the PS performance at the tumor site is of great research interest. Herein, we report a metal-organic framework (ZIF-8, ZIF = zeolitic imidazolate framework) assisted in vivo self-assembly nanoplatform, ZIF-8-PMMA-S-S-mPEG, as an effective tool for organic PS payloads to achieve efficient PDT. Using an organic PS with aggregation-induced emission as an example, under intratumoral bioreduction, PS-loaded ZIF-8-PMMA-S-S-mPEG (PS@ZIF-8-PMMA-S-S-mPEG) was self-assembled into large ordered hydrophobic clusters, which greatly enhance tumor retention and accumulation of the PS. Moreover, hydrophobic ZIF-8 assemblies greatly isolate the loaded PSs from water and improve O2 transport for the PSs to effectively produce 1O2 inside tumors under light irradiation. The organic PS is therefore endowed with optimal tumor accumulation and intratumoral 1O2 production, demonstrating the effectiveness of the developed self-assembly strategy in PDT application.

Polaronic Trions at the MoS2 /SrTiO3 Interface.

The reduced electrical screening in 2D materials provides an ideal platform for realization of exotic quasiparticles, that are robust and whose functionalities can be exploited for future electronic, optoelectronic, and valleytronic applications. Recent examples include an interlayer exciton, where an electron from one layer binds with a hole from another, and a Holstein polaron, formed by an electron dressed by a sea of phonons. Here, a new quasiparticle is reported, "polaronic trion" in a heterostructure of MoS2 /SrTiO3 (STO). This emerges as the Fröhlich bound state of the trion in the atomically thin monolayer of MoS2 and the very unique low energy soft phonon mode (≤7 meV, which is temperature and field tunable) in the quantum paraelectric substrate STO, arising below its structural antiferrodistortive (AFD) phase transition temperature. This dressing of the trion with soft phonons manifests in an anomalous temperature dependence of photoluminescence emission leading to a huge enhancement of the trion binding energy (≈70 meV). The soft phonons in STO are sensitive to electric field, which enables field control of the interfacial trion-phonon coupling and resultant polaronic trion binding energy. Polaronic trions could provide a platform to realize quasiparticle-based tunable optoelectronic applications driven by many body effects.

Dibenzothiophene-S,S-Dioxide-Based Conjugated Polymers: Highly Efficient Photocatalyts for Hydrogen Production from Water under Visible Light.

Three dibenzothiophene-S,S-dioxide-based alternating copolymers were synthesized by facile Suzuki polymerization for visible light-responsive hydrogen production from water (> 420 nm). Without addition of any cocatalyst, FluPh2-SO showed a photocatalytic efficiency of 3.48 mmol h-1 g-1 , while a larger hydrogen evolution rate (HER) of 4.74 mmol h-1 g-1 was achieved for Py-SO, which was ascribed to the improved coplanarity of the polymer that facilitated both intermolecular packing and charge transport. To minimize the possible steric hindrance of FluPh2-SO by replacing 9,9'-diphenylfluorene with fluorene, Flu-SO exhibited a more red-shifted absorption than FluPh2-SO and yielded the highest HER of 5.04 mmol h-1 g-1 . This work highlights the potential of dibenzothiophene-S,S-dioxide as a versatile building block and the rational design strategy for achieving high photocatalytic efficiency.

Ambipolar Charge Photogeneration and Transfer at GaAs/P3HT Heterointerfaces.

Recent work on hybrid photovoltaic systems based on conjugated polymers and III-V compound semiconductors with relatively high power conversion efficiency revived fundamental questions regarding the nature of charge separation and transfer at the interface between organic and inorganic semiconductors with different degrees of delocalization. In this work, we studied photoinduced charge generation and interfacial transfer dynamics in a prototypical photovoltaic n-type GaAs (111)B and poly(3-hexyl-thiophene) (P3HT) bilayer system. Ultrafast spectroscopy and density functional theory calculations indicate the coexistence of electron and hole transfer at the GaAs/P3HT interface, leading to the generation of long-lived species and photoinduced absorption upon creation of hybrid interfacial states. This opens up new avenues for the use of low-dimensional III-V compounds (e.g., nanowires or quantum dots) in hybrid organic/inorganic photovoltaics, where advanced bandgap and density of states engineering may also be exploited as design parameters.