Physical characterization and wound healing properties of Zamzam water.

The objective of the study was to evaluate the quality of Zamzam water, holy water for Muslims and consumed for its medicinal value. The present study demonstrates the physicochemical characterization and wound healing property of Zamzam water. The physicochemical characterization of Zamzam water samples was analyzed for dissolved oxygen, pH, conductivity, total dissolved solids, redox potential, zeta potential, polydispersity index, and zeta size. The microbial quality of Zamzam water was also assessed by exposing water samples to open air. In this work, Zamzam water was also screened for the medicinal value through wound healing properties in Wistar rats. Zamzam water exhibited a unique physicochemical characterization with high levels of dissolved oxygen, zeta potential, polydispersity index, redox potential, total dissolved solids, and conductivity before exposure to open air. After open air exposure, Zamzam water resisted the growth of bacteria. The wound healing properties of Zamzam water in vivo showed a 96% of healing effect on 12th day observation. The wound healing was achieved by modulating pro-inflammatory cytokine such as interleukin -1ß (IL-1ß), interleukin-6 (IL-6), and tumor necrosis factor -α (TNF-α). Followed by the level of apoptosis markers caspase-9 and caspase-3 were reduced. The present study proved that Zamzam water is a good-quality water and showed excellent wound healing property. Therefore, Zamzam water can be used for pharmaceutical formulations.

Wound-healing and cytokine-modulating potential of medicinal oil formulation comprising leaf extract of Murraya koenigii and olive oil.

The study investigated the wound healing effect of medicinal oil (MO) formulation prepared from Murraya koenigii leaves extract (methanolic) incorporated in olive oil. The MO was visually transparent, homogenous, smooth in texture, the viscosity grade was observed as 140 cP and easily spreadable. Pro-inflammatory cytokines IL-1ß, IL-6, and TNF-α were significantly reduced to 82.3 ± 3.5, 156 ± 6.2, 137.3. ± 5.5 pg/ml, respectively after treatment with MO when compared to disease control animals that showed IL-1ß, IL-6, and TNF-α levels of 170 ± 6, 265 ± 7, and 288.6 ± 11, pg/ml respectively. The level of pro-inflammatory cytokine in povidone iodine solution (PIS) group was 95.3 ± 3, 162 ± 6, 177.6 ± 8.9 pg/ml of IL-1ß, IL-6, and TNF-α respectively. Interestingly, the wound-healing efficacy of MO was found better as compared to povidone iodine treated standard group and concluded that MO has excellent wound healing effect.

Wound-healing and cytokine-modulating potential of medicinal oil formulation comprising leaf extract of Murraya koenigii and olive oil / Potencial de cicatrização de feridas e modulação de citocinas de formulação de óleo medicinal compreendendo extrato de folhas de Murraya koenigii e azeite de oliva

The study investigated the wound healing effect of medicinal oil (MO) formulation prepared from Murraya koenigii leaves extract (methanolic) incorporated in olive oil. The MO was visually transparent, homogenous, smooth in texture, the viscosity grade was observed as 140 cP and easily spreadable. Pro-inflammatory cytokines IL-1ß, IL-6, and TNF-α were significantly reduced to 82.3 ± 3.5, 156 ± 6.2, 137.3. ± 5.5 pg/ml, respectively after treatment with MO when compared to disease control animals that showed IL-1ß, IL-6, and TNF-α levels of 170 ± 6, 265 ± 7, and 288.6 ± 11, pg/ml respectively. The level of pro-inflammatory cytokine in povidone iodine solution (PIS) group was 95.3 ± 3, 162 ± 6, 177.6 ± 8.9 pg/ml of IL-1ß, IL-6, and TNF-α respectively. Interestingly, the wound-healing efficacy of MO was found better as compared to povidone iodine treated standard group and concluded that MO has excellent wound healing effect.

O estudo investigou o efeito cicatrizante da formulação de óleo medicinal (MO) preparado a partir do extrato de folhas de Murraya koenigii (metanol) incorporado ao azeite de oliva. O MO era visualmente transparente, homogêneo, de textura lisa, o grau de viscosidade observado foi de 140 cP e facilmente espalhável. As citocinas pró-inflamatórias IL-1ß, IL-6 e TNF-α foram significativamente reduzidas para 82,3 ± 3,5, 156 ± 6,2, 137,3. ± 5,5 pg/ml, respectivamente, após o tratamento com MO quando comparados aos animais controle da doença que apresentaram níveis de IL-1ß, IL-6 e TNF-α de 170 ± 6, 265 ± 7 e 288,6 ± 11, pg/ml, respectivamente . O nível de citocina pró-inflamatória no grupo solução de iodopovidona (PIS) foi de 95,3 ± 3, 162 ± 6, 177,6 ± 8,9 pg/ml de IL-1ß, IL-6 e TNF-α, respectivamente. Curiosamente, a eficácia de cicatrização de feridas de MO foi encontrada melhor em comparação com o grupo padrão tratado com iodopovidona e concluiu que a preparação de MO tem efeito de cicatrização de feridas.

Preliminary investigation tests of novel antifungal topical aerosol.

Spray formulation can minimize pain and irritation experience during the application of conventional dosage forms. Econazole Nitrate is an active ingredient of the aerosol concentrate to be used for twice-daily application because of its long durability in the superficial layers of the fungal infected skin. The aim of this study is preliminary investigation of Econazole Nitrate spray by varying the concentrations of different constituents of the spray. The ratios of Propylene glycol (PG) and isopropyl myristate (IPM) were selected as independent variables in 2(2) full factorial designs, keeping the concentration of solvent, co-solvent and propellant LPG constant. Aerosol also contained Ethanol as solvent and Isopropyl alcohol as co-solvent. All ingredients of the aerosol were packaged in an aluminum container fitted with continuous-spray valves. Physical properties evaluated for the Econazole Nitrate spray included delivery rate, delivery amount, pressure, minimum fill, leakage, flammability, spray patterns, particle image and plume angle. Glass containers were used to study incompatibility between concentrate and propellant due to the ease of visible inspection. Isopropyl myristate at lower concentrate showed turbidity, while at high concentration it met the requirements for aerosol and produced Econazole Nitrate spray with expected characteristics.

Pharmacognostic parameters for evaluation of the rhizomes of Curcuma caesia.

In ethno medicinal practices, the traditional healers use the genus Curcuma for the treatment of various ailments but Curcuma caesia Roxb. is a very less known and almost untouched drug. The present work attempts to establish the necessary pharmocognostic standards for evaluating the plant material of C. caesia Roxb. Various parameters, such as morphology, microscopy, physicochemical constants, and phytochemical profiles of the entire parts of the plant were studied and the salient diagnostic features are documented. Major chemical constituents, extractive values, physicochemical constants, and other features are also been recorded.

Chitosan hydrochloride based microspheres of albendazole for colonic drug delivery.

Microspheres of chitosan hydrochloride (CH) were prepared in order to deliver albendazole specifically into the colon. Microspheres were prepared by an emulsion method using different ratios of drug and CH (1:1 to 1:5), agitation speeds (500 to 1500 rpm) and concentrations of glutaraldehyde in toluene as the cross-linking agent (0.25 to 1.0% w/v). The effect of polymer concentration, stirring rate and concentration of cross-linking agent on the particle size and drug loading was studied. With an increase in CH concentration, the average particle size was increased. Increased agitation speed reduced the size of the microspheres but higher agitation speed resulted in irregularly shaped microspheres. Increasing the concentration of cross-linking agent produced more regularly shaped microspheres of smaller size. The drug loading was highest at a drug: CH ratio of 1:3, stirring speed 1000 rpm and 0.75% w/v concentration of cross-linking agent. The effect of CH concentration on in vitro drug release from the microspheres was evaluated in simulated g.i.t fluids. A comparative in vitro drug release study of the optimized formulation was carried out in simulated colonic fluid, with and without 2% rat caecal content. The drug release in 24 h was 48.9% in colonic fluid without rat caecal content, and 76.5% in colonic fluid with rat caecal contents.

Surface-modified mesoporous ceramics as delivery vehicle for haemoglobin.

Aquasomes, a new drug delivery system comprised of surface-modified nanocrystalline ceramic carbohydrate composites, was developed to serve as haemoglobin carrier for oxygen delivery. The hydroxy-apatite ceramic core was prepared by coprecipitation and self-precipitation and coated with various sugars like cellobiose, maltose, sucrose, and trehalose. The effect of drying methods, i.e., air drying, vacuum drying, and lyophilization, on the degree of binding was studied by concanavalin-induced aggregation method. Haemoglobin was adsorbed over the sugar-coated ceramics, and percent loading was estimated by benzidine method. The adsorption of sugars on calcium hydro-apatite powder and haemoglobin adsorption on sugar-adsorbed ceramic followed both Freundlich and Langmuir isotherm. The haemoglobin aquasome formulations (equivalent to 7.5% Hb) were suspended in a phosphate buffer containing 7.5% w/v albumin and 0.01% w/v lecithin, and they were evaluated for oxygen-carrying capacity, which was found to be similar to fresh blood. The Hill coefficients were found to be fairly good for its use as oxygen carrier. The haemoglobin aquasome formulations did not induce haemolysis of red blood cells nor alter the blood coagulation time. The haemoglobin content of the formulation remained unchanged on storage for 30 days. The haemoglobin desorption was fairly low under shear conditions, indicating good stability of formulation in biological system. During in vivo study in rats the survivals were monitored as function of hematocrit in rats receiving isovolemic exchange transfusion. Arterial blood pressure and heart rate did not change significantly in animals transfused with aquasomal suspension on 50% exchange transfusion.

Preparation and characterization of reverse micelle based organogels of piroxicam.

The solubilization of piroxicam to increase transdermal permeation rate was attempted by incorporating the drug in reverse micelle systems consisting of lecithin/isopropyl myristate/water [RMS-1] and sodium bis(2-ethylhexyl) sulfosuccinate (AOT)/isooctane/water [RMS-2]. The change in polarity of water present in the water pool formed by reverse micelles resulted in a solubilization of piroxicam. These systems were used for the formation of reverse micellar organogels RMO-1 and RMO-2 by means of either varying hydration ratio (Wo) or by addition of a macromolecule, e.g. gelatin, into the system or by taking both the parameters in consideration. These systems were evaluated for physical properties, toxicology, in vitro and in vivo transdermal permeation. Significant (p < 0.01) inhibition of carrageenan induced rat paw oedema was observed for products RMO-1 and RMO-2 and a marketed transdermal product after 3 h.

Hydrotropic solubilization of nimesulide for parenteral administration.

Nimesulide is a non-steroidal anti-inflammatory drug (NSAID) that exhibits analgesic, antipyretic and anti-inflammatory activities. It is practically insoluble in water. The effect of various hydrotropes such as nicotinamide, sodium ascorbate, sodium benzoate, sodium salicylate and piperazine on the solubility of nimesulide was investigated. The solubility enhancement of nimesulide by the hydrotropes was observed in decreasing order as piperazine > sodium ascorbate > sodium salicylate > sodium benzoate > nicotinamide. In order to elucidate the probable mechanism of solubilization, various solution properties of hydrotropes such as viscosity, specific gravity, surface tension, refractive index, specific conductance of hydrotropic solutions were studied at 25 +/- 2 degrees C on the basis of earlier studies. The hydrotropic solubilization of nimesulide at lower hydrotrope concentration may be attributed to weak ionic interactions while that at higher hydrotrope concentration may be due to molecular aggregation. Parenteral formulations using piperazine as a hydrotrope were developed and studied for physical and chemical stability.