RESUMO
Despite the increasing importance of mini-tablet for its advantages as pediatric formulations and in modified-release applications, its popularity is limited due to the lack of formulation and processing knowledge in developing such dosage forms. In this study, common grades of microcrystalline cellulose and roller compacted granules with a range of powder properties were used to evaluate the critical material properties required for the successful manufacturing of 1.7-mm mini-tablets. It was found that blends with small particle size had poor flow properties that did not support consistent die filling and also tended to cause tooling jam and damage. While the granulation process was effective in improving blend flow properties by increasing particle size, it is imperative to avoid very large particles that could also cause inadequate flow by blocking the space within the die. Successful mini-tablet compression could be achieved by removing particles larger than roughly 1/3 of the die diameter or milling the granules using a screen less than 1/3 of the die diameter.
Assuntos
Pós/química , Comprimidos/química , Celulose/química , Química Farmacêutica/métodos , Composição de Medicamentos/métodos , Excipientes/química , Tamanho da Partícula , PressãoRESUMO
The objective of this study was to improve the disintegration and dissolution characteristics of a highly water-soluble tablet matrix by altering the manufacturing process. A high disintegration time along with high dependence of the disintegration time on tablet hardness was observed for a high drug loading (70% w/w) API when formulated using a high-shear wet granulation (HSWG) process. Keeping the formulation composition mostly constant, a fluid-bed granulation (FBG) process was explored as an alternate granulation method using a 2(4-1) fractional factorial design with two center points. FBG batches (10 batches) were manufactured using varying disingtegrant amount, spray rate, inlet temperature (T) and atomization air pressure. The resultant final blend particle size was affected significantly by spray rate (p = .0009), inlet T (p = .0062), atomization air pressure (p = .0134) and the interaction effect between inlet T*spray rate (p = .0241). The compactibility of the final blend was affected significantly by disintegrant amount (p < .0001), atomization air pressure (p = .0013) and spray rate (p = .05). It was observed that the fluid-bed batches gave significantly lower disintegration times than the HSWG batches, and mercury intrusion porosimetry data revealed that this was caused by the higher internal pore structure of tablets manufactured using the FBG batches.
Assuntos
Composição de Medicamentos/métodos , Comprimidos/química , Água/química , Excipientes/química , Dureza , Tamanho da Partícula , Porosidade , SolubilidadeRESUMO
A multilayer tablet is one of the formulation options used to mitigate chemical and physical incompatibility between different drug substances. Feasibility studies of multilayer tablets are often conducted using round flat-faced punch tooling. However, the link between different tooling designs and multilayer tablet performance is not well established. This study uses a prototype trilayer tablet and examines tooling design considerations when conducting small-scale studies to gauge the risk of interfacial defects. The impact of tablet weight and dimensions was evaluated to gain understanding of the effect of scale-up/down of tablet size. The factors in tooling selection, including tablet shape, cup depth, and size of embossing were evaluated to gain insight on the impact of tooling design on the interfacial strength of the trilayer tablet. It was found that tablet weight and dimensions can significantly affect the interfacial strength due to their impact on force transmission during compression and the retardation force from the die wall during ejection. Round flat-faced tooling generated trilayer tablets of the strongest interfacial strength compared to typical commercial tablets-oval shaped with concave surfaces. These factors should be accounted for when using round flat compacts to assess the interface risks of a multilayer tablet.
Assuntos
Composição de Medicamentos/métodos , Comprimidos/química , Pressão , Propriedades de Superfície , Tecnologia Farmacêutica/métodosRESUMO
High-shear wet granulation is a complex process that in turn makes scale-up a challenging task. Scale-up of high-shear wet granulation process has been studied extensively in the past with various different methodologies being proposed in the literature. This review article discusses existing scale-up principles and categorizes the various approaches into two main scale-up strategies - parameter-based and attribute-based. With the advent of quality by design (QbD) principle in drug product development process, an increased emphasis toward the latter approach may be needed to ensure product robustness. In practice, a combination of both scale-up strategies is often utilized. In a QbD paradigm, there is also a need for an increased fundamental and mechanistic understanding of the process. This can be achieved either by increased experimentation that comes at higher costs, or by using modeling techniques, that are also discussed as part of this review.
Assuntos
Química Farmacêutica/métodos , Composição de Medicamentos/métodos , Tecnologia Farmacêutica/métodos , Modelos TeóricosRESUMO
In a previous study, hydroxypropyl cellulose (HPC)-based capsular shells prepared by injection molding and intended for pulsatile release were successfully coated with 10mg/cm(2) Eudragit® L film. The suitability of HPC capsules for the development of a colon delivery platform based on a time dependent approach was demonstrated. In the present work, data logging devices (PyroButton®) were used to monitor the microenvironmental conditions, i.e. temperature (T) and relative humidity (RH), during coating processes performed under different spray rates (1.2, 2.5 and 5.5g/min). As HPC-based capsules present special features, a preliminary study was conducted on commercially available gelatin capsules for comparison purposes. By means of PyroButton data-loggers it was possible to acquire information about the impact of the effective T and RH conditions experienced by HPC substrates during the process on the technological properties and release performance of the coated systems. The use of increasing spray rates seemed to promote a tendency of the HPC shells to slightly swell at the beginning of the spraying process; moreover, capsules coated under spray rates of 1.2 and 2.5g/min showed the desired release performance, i.e. ability to withstand the acidic media followed by the pulsatile release expected for uncoated capsules. Preliminary stability studies seemed to show that coating conditions might also influence the release performance of the system upon storage.
Assuntos
Cápsulas/síntese química , Celulose/análogos & derivados , Química Farmacêutica/métodos , Umidade/normas , Temperatura , Celulose/síntese químicaRESUMO
Scale up of pan coating process is of high importance to the pharmaceutical and food industry. The number of process variables and their interdependence in a pan coating process can make it a rather complex scale-up problem. This review discusses breaking down the coating process variables into three main categories: pan-related, spray-related, and thermodynamic-related factors. A review on how to scale up each of these factors is presented via two distinct strategies--"macroscopic" and "microscopic" scale-up. In a Quality by Design paradigm, where an increased process understanding is required, there is increased emphasis on "microscopic" scale-up, which by definition ensures a more reproducible process and thereby robust scale-up. This article also reviews the various existing and new modeling and process analytical technology tools that can provide additional information to facilitate a more fundamental understanding of the coating process.
Assuntos
Composição de Medicamentos/métodos , Comprimidos com Revestimento Entérico/química , Composição de Medicamentos/instrumentação , Controle de Qualidade , TermodinâmicaRESUMO
This work aimed to evaluate the commonly used scale-up rules for high-shear wet granulation process using a microcrystalline cellulose-lactose-based low drug loading formulation. Granule properties such as particle size, porosity, flow, and tabletability, and tablet dissolution were compared across scales using scale-up rules based on different impeller speed calculations or extended wet massing time. Constant tip speed rule was observed to produce slightly less granulated material at the larger scales. Longer wet massing time can be used to compensate for the lower shear experienced by the granules at the larger scales. Constant Froude number and constant empirical stress rules yielded granules that were more comparable across different scales in terms of compaction performance and tablet dissolution. Granule porosity was shown to correlate well with blend tabletability and tablet dissolution, indicating the importance of monitoring granule densification (porosity) during scale-up. It was shown that different routes can be chosen during scale-up to achieve comparable granule growth and densification by altering one of the three parameters: water amount, impeller speed, and wet massing time.
Assuntos
Química Farmacêutica/métodos , Comprimidos/química , Tecnologia Farmacêutica/métodos , Água/química , Celulose/química , Lactose/química , PorosidadeRESUMO
Real-time monitoring and control of high shear wet granulation (HSWG) using process analytical technologies is crucial to process design, scale-up, and reproducible manufacture. Although significant progress has been made in real-time measurement of granule size distribution using focused beam reflectance measurement (FBRM), real-time in-line assessment of granule densification remains challenging. In this study, a drag force flow (DFF) sensor was developed and used to probe wet mass consistency in real-time. In addition, responses from FBRM and DFF sensors were compared to assess complementarity of information on granulation progress from the two probes. A placebo and a brivanib alaninate formulation were granulated with different concentrations of binder or water, respectively, while measuring granule size growth, densification, and DFF sensor response. The DFF sensor was able to quantitatively characterize with high resolution a response of wet mass consistency distinct from granule size distribution. The wet mass consistency parameter correlated well with granule densification, which was shown as a critical material attribute that correlated with tablet dissolution. In addition, application of DFF sensor to scale-up of granulation was demonstrated. These results showed the value of wet mass consistency measurement using DFF for WG monitoring and control.
Assuntos
Alanina/análogos & derivados , Tecnologia Farmacêutica/métodos , Triazinas/química , Administração Oral , Alanina/administração & dosagem , Alanina/química , Carboximetilcelulose Sódica/química , Celulose/análogos & derivados , Celulose/química , Química Farmacêutica , Desenho de Equipamento , Excipientes/química , Cinética , Lactose/química , Modelos Químicos , Modelos Estatísticos , Tamanho da Partícula , Placebos , Porosidade , Pós , Controle de Qualidade , Solubilidade , Comprimidos , Tecnologia Farmacêutica/instrumentação , Tecnologia Farmacêutica/normas , Triazinas/administração & dosagem , Água/químicaRESUMO
Although significant progress had been made in developing general scale-up rules for an aqueous pan-coating process, there are often scenarios where small-scale experiments are not found to be truly reflective of what may be observed at the large scale. This article reviews some of the methods traditionally used for scale-up, identifies the gaps associated with the traditional scale-up rules, and provides a perspective on a new real-time process monitoring tool that is capable of providing thermodynamic changes taking place in the microenvironment of the substrate being coated. This tool has been used to ensure increased success during scale-up by maintaining environmentally equivalent conditions between the processes, especially for systems that are sensitive to small thermodynamic changes.
Assuntos
Excipientes/química , Preparações Farmacêuticas/química , Tecnologia Farmacêutica/métodos , Temperatura , Química Farmacêutica , ComprimidosRESUMO
The objective of this work was to monitor and identify the impact of coating microenvironment, as measured by PyroButtons(®) data loggers, on the chemical stability of a moisture-sensitive drug molecule brivanib alaninate (BA). BA tablets were coated at two different scales (15 and 24 in pan). PyroButtons(®) data loggers were allowed to move freely within the tablet bed to record the temperature and relative humidity conditions of the tablet bed. The tablet moisture content at the end of the coating runs, and the rate of hydrolysis of the BA tablets based on HPLC analysis was found to be a function of the coating thermodynamic microenvironment. Wetter coating conditions resulted in tablets with higher water content and showed greater degradation upon storage. The coating process which yielded acceptable stability in a 15 in coater was transferred to a 24 in coater by maintaining similar tablet-bed relative humidity and temperature conditions. This was compared to a traditional scale-up approach where the environmental equivalency factor (EEF) was matched between scales during coating. The moisture content observed across the two scales indicated that maintaining a similar tablet-bed microenvironment ensured consistent results between scales.
Assuntos
Química Farmacêutica/métodos , Água/química , Alanina/administração & dosagem , Alanina/análogos & derivados , Alanina/química , Cromatografia Líquida de Alta Pressão , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Umidade , Hidrólise , Comprimidos , Temperatura , Termodinâmica , Triazinas/administração & dosagem , Triazinas/químicaRESUMO
The objective of this study was to establish the effects of the level of minor formulation components (sodium lauryl sulfate: SLS, and magnesium stearate: MgSt) and manufacturing process on final blend compaction properties and the performance of the tablets during film coating. A 2 × 2 × 3 factorial study was conducted at two levels of SLS (0% and 1%, w/w) and MgSt (0.5% and 1.75%, w/w), along with three different manufacturing processes (direct compression, high-shear wet granulation, and dry granulation). The tablets were compressed to the same solid fraction (0.9) and the resulting tablet hardness values were found to vary over a range of 13-42 SCU, highlighting large compactability differences among these batches. Increase in the level of SLS or MgSt in the formulation had a significant negative effect on compactability and the performance of film-coated tablets. The detrimental effects on compaction and coating performance were magnified for the dry granulation process, likely due to the overall increased shear experienced by excipients (SLS, MgSt, microcrystalline cellulose) during the roller compaction and milling steps. The findings of this study highlight the importance of the manufacturing process when considering the use-level of formulation components such as SLS and MgSt in the formulation.
Assuntos
Celulose/química , Excipientes/química , Dodecilsulfato de Sódio/química , Ácidos Esteáricos/química , Química Farmacêutica , Dureza , Testes de Dureza , Pressão , Propriedades de Superfície , Comprimidos , Tecnologia Farmacêutica/métodosRESUMO
This study presents a formulation approach that was shown to mitigate the dramatic food effect observed for a BCS Class II drug. In vitro (dissolution), in vivo (dog), and in silico (GastroPlus®) models were developed to understand the food effect and design strategies to mitigate it. The results showed that such models can be used successfully to mimic the clinically observed food effect. GastroPlus® modeling showed that food effect was primarily due to the extensive solubilization of the drug into the dietary lipid content of the meal. Several formulations were screened for dissolution rate using the biorelevant dissolution tests. Surfactant type and binder amount were found to play a significant role in the dissolution rate of the tablet prototypes that were manufactured using a high-shear wet granulation process. The performance of the lead prototypes (exhibiting best in vitro dissolution performance) was tested in dogs and human subjects. A new formulation approach, where vitamin E TPGS was included in the tablet formulation, was found to mitigate the food effect in humans.
Assuntos
Química Farmacêutica , Interações Alimento-Droga , Animais , Cães , Humanos , SolubilidadeRESUMO
OBJECTIVE: The objective of the current study was to establish the use of PyroButton data-logging device to monitor and quantify the thermodynamic environment (temperature and humidity) of a pan coating process. MATERIAL AND METHODS: PyroButtons were placed (fixed) at various locations in a pan coater, including exhaust plenum, spray-gun bar, baffles and were also allowed to freely move with the tablet-bed. A full factorial design of experiments (DOE) study on three process parameters, exhaust temperature, pan speed and spray rate was conducted on a 24 inch pan coater, using a coating system and a core tablet combination expected to have a narrow process operating space. RESULTS: It was shown that the PyroButtons can provide a detailed and useful signature of the coating process. PyroButton data showed that the tablet-bed temperature was always lower than exhaust temperature and that the difference was a function of the operating conditions such as spray rate. Similarly, the tablet-bed humidity was found to always be higher than exhaust humidity. Some of the DOE batches showed coating defects (logo-bridging). It was shown that the relative humidity (RH), as measured by the freely-moving PyroButtons in the tablet-bed, correlated well with the logo-bridging events. A critical RH value (30%) was established, above which logo-bridging was observed for the selected formulation. CONCLUSIONS: This study showed that PyroButtons can provide very meaningful micro-environmental data that can be correlated to coating defects, and can aid in establishing a process design space for a given coating and tablet formulation.
Assuntos
Química Farmacêutica/métodos , Excipientes/química , Termodinâmica , Química Farmacêutica/instrumentação , Desenho de Equipamento , Umidade , Comprimidos , TemperaturaRESUMO
The objective of the current work was to study an observed incompatibility between croscarmellose sodium and basic excipients in a tablet formulation. Significant dissolution slowdown was observed for alkaline tablet compositions of an acid-labile drug containing croscarmellose sodium (CCS) as a disintegrant. The severity of the dissolution slowdown was directly proportional to both the degree of alkalinity and the level of CCS in the tablet formulation. It is postulated that the ester cross-links in CCS were partially or fully hydrolyzed under basic conditions (pH values >9) forming by-products of increased water solubility. This increase in the level of water-soluble polymer can lead to the formation of a viscous barrier in the tablet upon moisture uptake, thus slowing down its dissolution. The dissolution slowdown was not observed for a similar alkaline tablet preparation containing crospovidone as a disintegrant.
Assuntos
Carboximetilcelulose Sódica/química , Excipientes/química , Comprimidos/química , Química Farmacêutica , Composição de Medicamentos , Géis/química , Concentração de Íons de Hidrogênio , Hidrólise , Povidona/química , SolubilidadeRESUMO
OBJECTIVE: The objective of this study was to determine the impact that the micro-environment, as measured by PyroButton data loggers, experienced by tablets during the pan coating unit operation had on the layer adhesion of bilayer tablets in open storage conditions. MATERIALS AND METHODS: A full factorial design of experiments (DOE) with three center points was conducted to study the impact of final tablet hardness, film coating spray rate and film coating exhaust temperature on the delamination tendencies of bilayer tablets. PyroButton data loggers were placed (fixed) at various locations in a pan coater and were also allowed to freely move with the tablet bed to measure the micro-environmental temperature and humidity conditions of the tablet bed. RESULTS: The variance in the measured micro-environment via PyroButton data loggers accounted for 75% of the variance in the delamination tendencies of bilayer tablets on storage (R(2 )= 0.75). A survival analysis suggested that tablet hardness and coating spray rate significantly impacted the delamination tendencies of the bilayer tablets under open storage conditions. The coating exhaust temperature did not show good correlation with the tablets' propensity to crack indicating that it was not representative of the coating micro-environment. Models created using data obtained from the PyroButton data loggers outperformed models created using primary DOE factors in the prediction of bilayer tablet strength, especially upon equipment or scale transfers. CONCLUSION: The coating micro-environment experienced by tablets during the pan coating unit operation significantly impacts the strength of the bilayer interface of tablets on storage.
Assuntos
Combinação de Medicamentos , Composição de Medicamentos/métodos , Comprimidos/química , Comprimidos/normas , Termodinâmica , Composição de Medicamentos/normas , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Excipientes/química , Dureza , Modelos QuímicosRESUMO
Recent studies have shown the importance of monitoring microenvironmental conditions (temperature, relative humidity) experienced by the tablet bed during a pan coating process, thereby necessitating the need to understand how various process parameters influence these microenvironmental conditions. The process parameters studied in this work include exhaust air temperature, spray rate, inlet airflow rate, gun-to-bed distance, coating suspension percent solids, and atomization and pattern air pressure. Each of these process parameters was found to have an impact on the tablet bed relative humidity (RH), as measured using PyroButton data logging devices. A higher tablet bed RH was obtained with an increase in spray rate and atomization air pressure and with a decrease in exhaust air temperature, inlet airflow rate, gun-to-bed distance, suspension percent solids, and pattern air pressure. Based on this work, it can be concluded that the tablet bed thermodynamic conditions are a cumulative effect of the various process conditions. A strong correlation between the tablet bed RH and the frequency of tablet coating defect (logo bridging) was established, with increasing RH resulting in a higher percent of logo bridging events.
Assuntos
Química Farmacêutica , Comprimidos , Placebos , Polímeros/química , TemperaturaRESUMO
The current study demonstrates the use of tablet-size data logging devices (PyroButtons) to quantify the microenvironment experienced by tablets during pan coating process. PyroButtons were fixed at the inlet and exhaust plenums, and were also placed to freely move with the tablets. The effects of process parameters (spray rate and inlet-air humidity) on the thermodynamic conditions inside the pan coater were studied. It was shown that the same exhaust temperature (a parameter most commonly monitored and controlled during film coating) can be attained with very different tablet-bed conditions. The tablet-bed conditions were found to be more sensitive to the changes in spray rate as compared with the inlet-air humidity. Both spray rate and inlet-air humidity were shown to have an effect on the number of tablet defects (loss of logo definition), and a good correlation between number of tablet defects and tablet-bed humidity was observed. The ability to quantify the thermodynamic microenvironment experienced by the tablets during coating and be able to correlate that to macroscopic tablet defects can be an invaluable tool that can help to establish a process design space during product development.
Assuntos
Química Farmacêutica/métodos , Sistemas Computacionais , Comprimidos com Revestimento Entérico/química , TermodinâmicaRESUMO
The purpose of the current work is to study the effects of high-shear wet granulation process parameters on granule characteristics using both experimental and modeling techniques. A full factorial design of experiments was conducted on three process parameters: water amount, impeller speed and wet massing time. Statistical analysis showed that the water amount has the largest impact on the granule characteristics, and that the effect of other process variables was more pronounced at higher water amount. At high water amounts, an increase in impeller speed and/or wet massing time showed a decrease in granule porosity and compactability. A strong correlation between granule porosity and compactability was observed. A three-dimensional population balance model which considers agglomeration and consolidation was employed to model the granulation process. The model was calibrated using the particle size distribution from an experimental batch to ensure a good match between the simulated and experimental particle size distribution. The particle size distribution of three other batches were predicted, each of which was manufactured under different process parameters (water amount, impeller speed and wet massing time). The model was able to capture and predict successfully the shifts in granule particle size distribution with changes in these process parameters.
Assuntos
Composição de Medicamentos/métodos , Excipientes/química , Modelos Químicos , Água/química , Celulose/química , Formas de Dosagem , Lactose/química , Tamanho da Partícula , Porosidade , Comprimidos , Fatores de TempoRESUMO
The objective of this study is to investigate processing challenges associated with the incorporation of Vitamin E TPGS (d-α tocopheryl polyethylene glycol 1000 succinate) into solid pharmaceutical dosage forms. For this work, a wet granulation process (high-shear and fluid bed) was used and Vitamin E TPGS was added as part of the binder solution during granulation. It was shown that Vitamin E TPGS can be incorporated into a prototype formulation at 10% w/w concentration without any significant processing challenges. However, the resulting granulations could only be compressed successfully at low tablet press speeds (dwell time ~100 ms). When compressed at low dwell times (<20 ms) representative of commercial tablet manufacturing, a significant loss in compactability was observed. In addition, several other tablet defects were observed. It was shown that intragranular incorporation of Aeroperl(®) 300, a granulated form of colloidal silicon dioxide, was able to overcome these compaction problems. The formulation consisting of Aeroperl(®) 300 showed significantly lower granule particle size, higher granule porosity and higher compactability as compared to the formulation without Aeroperl(®) 300.
Assuntos
Composição de Medicamentos/métodos , Excipientes/química , Dióxido de Silício/química , Vitamina E/análogos & derivados , Coloides , Tamanho da Partícula , Polietilenoglicóis/química , Porosidade , Comprimidos , Fatores de Tempo , Vitamina E/químicaRESUMO
Instrumented roll technology on Alexanderwerk WP120 roller compactor was developed and utilized successfully for the measurement of normal stress on ribbon during the process. The effects of process parameters such as roll speed (4-12 rpm), feed screw speed (19-53 rpm), and hydraulic roll pressure (40-70 bar) on normal stress and ribbon density were studied using placebo and active pre-blends. The placebo blend consisted of 1:1 ratio of microcrystalline cellulose PH102 and anhydrous lactose with sodium croscarmellose, colloidal silicon dioxide, and magnesium stearate. The active pre-blends were prepared using various combinations of one active ingredient (3-17%, w/w) and lubricant (0.1-0.9%, w/w) levels with remaining excipients same as placebo. Three force transducers (load cells) were installed linearly along the width of the roll, equidistant from each other with one transducer located in the center. Normal stress values recorded by side sensors and were lower than normal stress values recorded by middle sensor and showed greater variability than middle sensor. Normal stress was found to be directly proportional to hydraulic pressure and inversely to screw to roll speed ratio. For active pre-blends, normal stress was also a function of compressibility. For placebo pre-blends, ribbon density increased as normal stress increased. For active pre-blends, in addition to normal stress, ribbon density was also a function of gap. Models developed using placebo were found to predict ribbon densities of active blends with good accuracy and the prediction error decreased as the drug concentration of active blend decreased. Effective angle of internal friction and compressibility properties of active pre blend may be used as key indicators for predicting ribbon densities of active blend using placebo ribbon density model. Feasibility of on-line prediction of ribbon density during roller compaction was demonstrated using porosity-pressure data of pre-blend and normal stress measurements. Effect of vacuum to de-aerate pre blend prior to entering the nip zone was studied. Varying levels of vacuum for de-aeration of placebo pre blend did not affect the normal stress values. However, turning off vacuum completely caused an increase in normal stress with subsequent decrease in gap. Use of instrumented roll demonstrated potential to reduce the number of DOE runs by enhancing fundamental understanding of relationship between normal stress on ribbon and process parameters.