Effect of radiation therapy on fracture resistance of simulated immature teeth submitted to root reinforcement.

BACKGROUND: The literature is scanty regarding the effect of radiation therapy (RT) on the mechanical properties of immature permanent teeth. AIM: To evaluate the effect of RT on the fracture resistance of simulated immature teeth submitted to different types of root reinforcement. DESIGN: Sixty-four human teeth simulating the Cvek stage 3 of root development were distributed into eight groups (n = 8), according to exposure or not to RT (70 Gy) and the root reinforcement method: Group NR (control)-no reinforcement/no RT; Group NR + RT (control)-no reinforcement/RT; Group PO-tricalcium silicate-based cement (TS) apical plug/canal obturation/no RT; Group PO + RT-TS apical plug/canal obturation/RT; Group TS-canal filling with TS/no RT; Group TS + RT-canal filling with TS/RT; Group FP-TS apical plug/fibreglass post/no RT; and Group FP + RT-TS apical plug/fibreglass post/RT. Fracture resistance was determined using a universal testing machine (0.5 mm/min). RESULTS: In the intergroup comparison, nonirradiated teeth had higher fracture resistance (p < .05). Groups FP and FP + RT had higher fracture resistance (p < .001). CONCLUSION: Radiotherapy affected the fracture resistance of simulated immature teeth. Reinforcement with fibreglass posts increased the fracture resistance, regardless of the radiation.

Shaping Ability of Reciprocating and Rotary Systems After Root Canal Retreatment: a CBCT Study.

The purpose of this in vitro study was to evaluate the shaping ability of reciprocating and continuous rotary systems after root canal retreatment. After preparation and root canal filling, mesial canals of 54 mandibular molars were distributed into 3 groups (n=18), according to the filling material removal and re-instrumentation protocols: WOG group - WaveOne Gold system; PTN group - ProTaper Next system; and PTU group - ProTaper Universal system. Cone-beam computed tomographic (CBCT) images acquisition of the mesial root canals was performed at different moments: (1) before instrumentation (unprepared root canals), (2) after preparation and filling, (3) after filling material removal and (4) re-instrumentation. The apical transportation (AT), centering ability (CA) and change in root canal diameter were assessed by CBCT analysis. The remaining filling material quantification was performed by radiographic examination. The statistical analyses were performed using the 3-way ANOVA, Tukey-Kramer, Kruskal-Wallis and Dunn multiple Comparison tests (p<0.05). The tested instruments did not show full CA (=1.0). PTN group had greater AT at the 5th mm in comparison with the WOG group (p<0.05). After re-instrumentation, WOG group had greater root canal diameter change at the 1st and 5th mm than PTN and PTU groups (p<0.05). There was no significant difference among groups when comparing the amount of remaining filling material after re-instrumentation (p>0.05). The tested systems provided minimal alteration in root canal morphology at the apical portion after root canal retreatment. However, WOG promoted greater change in root canal diameter.

Shaping Ability of Reciprocating and Rotary Systems After Root Canal Retreatment: a CBCT Study

Abstract The purpose of this in vitro study was to evaluate the shaping ability of reciprocating and continuous rotary systems after root canal retreatment. After preparation and root canal filling, mesial canals of 54 mandibular molars were distributed into 3 groups (n=18), according to the filling material removal and re-instrumentation protocols: WOG group - WaveOne Gold system; PTN group - ProTaper Next system; and PTU group - ProTaper Universal system. Cone-beam computed tomographic (CBCT) images acquisition of the mesial root canals was performed at different moments: (1) before instrumentation (unprepared root canals), (2) after preparation and filling, (3) after filling material removal and (4) re-instrumentation. The apical transportation (AT), centering ability (CA) and change in root canal diameter were assessed by CBCT analysis. The remaining filling material quantification was performed by radiographic examination. The statistical analyses were performed using the 3-way ANOVA, Tukey-Kramer, Kruskal-Wallis and Dunn multiple Comparison tests (p<0.05). The tested instruments did not show full CA (=1.0). PTN group had greater AT at the 5th mm in comparison with the WOG group (p<0.05). After re-instrumentation, WOG group had greater root canal diameter change at the 1st and 5th mm than PTN and PTU groups (p<0.05). There was no significant difference among groups when comparing the amount of remaining filling material after re-instrumentation (p>0.05). The tested systems provided minimal alteration in root canal morphology at the apical portion after root canal retreatment. However, WOG promoted greater change in root canal diameter.

Resumo O objetivo deste estudo in vitro foi avaliar a capacidade de modelagem de sistemas rotatórios e reciprocantes após o retratamento do canal radicular. Após o preparo e obturação do canal radicular, os canais mesiais de 54 molares inferiores foram distribuídos em 3 grupos, de acordo com os protocolos de remoção do material obturador e re-instrumentação: (n=18): grupo WOG - sistema WaveOne Gold; Grupo PTN - sistema ProTaper Next; e grupo PTU - sistema ProTaper Universal. A análise das imagens de tomografia computadorizada de feixe cônico foi realizada em diferentes momentos: (1) antes da instrumentação (canais radiculares não preparados), (2) após o preparo e obturação, (3) após a remoção do material obturador e (4) re-instrumentação. O transporte apical (TA), a capacidade de centralização (CC) e a mudança no diâmetro do canal radicular foram avaliados por análise tomográfica. A quantificação do restante do material obturador foi realizada por exame radiográfico. As análises estatísticas foram realizadas utilizando os testes de ANOVA de 3 fatores, Tukey-Kramer, Kruskal-Wallis e Comparações Múltiplas de Dunn (p<0,05). Os instrumentos não apresentaram CC perfeita (=1,0). PTN apresentou maior TA no 5º mm em comparação ao grupo WOG (p<0,05). Após a re-instrumentação, o grupo WOG apresentou maior aumento no diâmetro do canal radicular no 1° e 5° mm do que os grupos PTN e PTU. Não houve diferença significativa entre os grupos em relação à remoção do material obturador (p>0,05). Os sistemas testados proporcionaram alteração mínima na morfologia do canal radicular na porção apical após o retratamento do canal radicular. No entanto, WOG promoveu maior alteração no diâmetro do canal radicular.

Effect of root perforation repair with mineral aggregate-based cements on the retention of customized fiberglass posts.

The purpose of this study was to investigate whether the root perforation repair with mineral aggregate-based cements affects the retention of customized fiberglass posts to bovine intraradicular dentin. Sixty-four bovine mandibular incisors had their root canals endodontically treated and prepared for fiberglass posts luting. Teeth were randomly distributed into four groups (n = 16), according to the cement used for the perforations repair (MTA HP; calcium aluminate cement-CAC; and CAC + calcium carbonate nanoparticles-nano-CaCO3) and control group (no perforation). The groups were redistributed according to the fiberglass posts luting protocol (n = 8): total-etching (TE) (MTA HP/TE; CAC/TE; CAC + CaCO3/TE and control/TE) and self-etching (SE) (MTA HP/SE; CAC/SE; CAC + CaCO3/SE and control/SE). Roots were sectioned into 1.3 mm-thick dentin slices obtaining samples that were submitted to the push-out test in Universal Testing Machine (Instron, Model 4444-0.5 mm/min). The fractured samples were analyzed under stereomicroscope and Scanning Electron Microscope (SEM). CAC/TE and CAC/SE groups had significant difference between the cervical and middle thirds (p < 0.05). When the root thirds were not considered, CAC/SE had the lowest bond strength and differed statistically from CAC/TE and CAC + CaCO3/TE groups, which had the highest mean bond strength values (p < 0.05). The root perforations repair did not affect the bond strength of resin cement/customized fiberglass posts to bovine dentin. The increase in bond strength is luting protocol dependent.

Fracture Resistance of Simulated Immature Teeth Reinforced with Different Mineral Aggregate-Based Materials.

This study assessed the fracture resistance of simulated immature teeth reinforced with calcium aluminate cement (CAC) or mineral trioxide aggregate (MTA) containing calcium carbonate nanoparticles (nano-CaCO3). The microstructural arrangement of the cements and their chemical constitution were also evaluated. Forty-eight canines simulating immature teeth were distributed into 6 groups (n=8): Negative control - no apical plug or root canal filling; CAC - apical plug with CAC; CAC/nano-CaCO3 - apical plug with CAC+5% nano-CaCO3; MTA - apical plug with MTA; MTA/nano-CaCO3 - apical plug with MTA+5% nano-CaCO3; and Positive control - root canal filling with MTA. The fracture resistance was evaluated in a universal testing machine. Samples of the cements were analyzed under Scanning Electron Microscope (SEM) to determine their microstructural arrangement. Chemical analysis of the cements was performed by Energy Dispersive X-ray Spectroscopy (EDS). The fracture resistance of CAC/nano-CaCO3 was significantly higher than the negative control (p<0.05). There was no significant difference among the other groups (p>0.05). Both cements had a more regular microstructure with the addition of nano-CaCO3. MTA samples had more calcium available in soluble forms than CAC. The addition of nano-CaCO3 to CAC increased the fracture resistance of teeth in comparison with the non-reinforced teeth. The microstructure of both cements containing nano-CaCO3 was similar, with a more homogeneous distribution of lamellar- and prismatic-shaped crystals. MTA had more calcium available in soluble forms than CAC.

Fracture resistance of simulated immature teeth reinforced with different mineral aggregate-based materials

Abstract This study assessed the fracture resistance of simulated immature teeth reinforced with calcium aluminate cement (CAC) or mineral trioxide aggregate (MTA) containing calcium carbonate nanoparticles (nano-CaCO3). The microstructural arrangement of the cements and their chemical constitution were also evaluated. Forty-eight canines simulating immature teeth were distributed into 6 groups (n=8): Negative control - no apical plug or root canal filling; CAC - apical plug with CAC; CAC/nano-CaCO3 - apical plug with CAC+5% nano-CaCO3; MTA - apical plug with MTA; MTA/nano-CaCO3 - apical plug with MTA+5% nano-CaCO3; and Positive control - root canal filling with MTA. The fracture resistance was evaluated in a universal testing machine. Samples of the cements were analyzed under Scanning Electron Microscope (SEM) to determine their microstructural arrangement. Chemical analysis of the cements was performed by Energy Dispersive X-ray Spectroscopy (EDS). The fracture resistance of CAC/nano-CaCO3 was significantly higher than the negative control (p<0.05). There was no significant difference among the other groups (p>0.05). Both cements had a more regular microstructure with the addition of nano-CaCO3. MTA samples had more calcium available in soluble forms than CAC. The addition of nano-CaCO3 to CAC increased the fracture resistance of teeth in comparison with the non-reinforced teeth. The microstructure of both cements containing nano-CaCO3 was similar, with a more homogeneous distribution of lamellar- and prismatic-shaped crystals. MTA had more calcium available in soluble forms than CAC.

Resumo Este estudo avaliou a resistência à fratura de dentes imaturos simulados reforçados com cimento de aluminato de cálcio (CAC) ou trióxido agregado mineral (MTA) contendo nanopartículas de carbonato de cálcio (nano-CaCO3). O arranjo microestrutural dos cimentos e sua constituição química também foram avaliados. Quarenta e oito caninos simulando dentes imaturos foram distribuídos em 6 grupos (n=8): Controle negativo - sem plug apical ou obturação do canal radicular; CAC - plug apical com CAC; CAC/nano-CaCO3 - plug apical com CAC + 5% nano-CaCO3; MTA - plug apical com MTA; MTA/nano-CaCO3 - plug apical com MTA + 5% nano-CaCO3; e Controle positivo - obturação dos canais radiculares com MTA. A resistência à fratura foi avaliada em máquina universal de ensaios. Amostras dos cimentos foram analisadas em Microscópio Eletrônico de Varredura (MEV) para determinar seu arranjo microestrutural. A análise química dos cimentos foi realizada por Espectroscopia de Energia Dispersiva de Raio-X (EDS). A resistência à fratura de CAC/nano-CaCO3 foi significativamente maior do que o controle negativo (p<0,05). Não houve diferença significativa entre os outros grupos (p>0,05). Ambos os cimentos apresentaram microestrutura mais regular com a adição de nano-CaCO3. As amostras de MTA apresentaram mais cálcio disponível em formas solúveis do que CAC. A adição de nano-CaCO3 ao CAC aumentou a resistência à fratura dos dentes em comparação aos dentes não reforçados. A microestrutura de ambos os cimentos contendo nano-CaCO3 foi semelhante, com uma distribuição mais homogênea de cristais de formato lamelar e prismático. MTA apresentou mais cálcio disponível nas formas solúveis do que CAC.

Endodontic Surgery Associated with Guided Tissue Regeneration Technique: Case Report / Cirurgia Parendodôntica Associada à Técnica de Regeneração Tecidual Guiada: Relato de Caso

Non-surgical endodontic retreatment should always be the first option for reintervention when the initial endodontic treatment fails. The surgical treatment, called periradicular surgery, will be the procedure of choice when there is no success after the conventional endodontic retreatment. The purpose of this article is to describe clinical case of endodontic surgery, associated with guided tissue regeneration (GTR). A male patient, 24 years old, was referred for endodontic surgery on tooth 12 after two unsuccessful endodontic interventions. During the surgery, osteotomy, lesion curettage, apicectomy, retrograde obturation with Mineral Trioxide Aggregate (MTA), and filling of the bone failure with lyophilized bone and reabsorbable collagen membrane were performed. After six months of follow-up, the patient did not present any type of painful symptomatology. The endodontic surgery, associated with a technique of guided tissue regeneration, was efficient to solve this clinical case. (AU)

O retratamento endodôntico não cirúrgico deve sempre ser a primeira opção de reintervenção quando o tratamento endodôntico inicial falha. Já o tratamento cirúrgico, ou cirurgia parendodôntica, será o procedimento de escolha quando não há sucesso após o retratamento endodôntico convencional. O objetivo deste artigo é descrever um caso clínico de cirurgia parendodôntica, associada à regeneração tecidual guiada (RTG). O paciente, gênero masculino, 24 anos, foi encaminhado para cirurgia parendodôntica no dente 12 após duas intervenções endodônticas sem sucesso. Durante a cirurgia foram realizadas manobras de osteotomia, curetagem da lesão, apicectomia, obturação retrógrada com Mineral Trióxido Agregado (MTA), além de preenchimento da falha óssea com osso liofilizado e membrana de colágeno reabsorvível. Após seis meses de acompanhamento do caso, o paciente não apresentou nenhum tipo de sintomatologia dolorosa. A cirurgia parendodôntica, associada à técnica de regeneração tecidual guiada, foi eficiente para solucionar este caso clínico. (AU).

Apical Transportation and Centering Ability After Root Canal Filling Removal Using Reciprocating and Continuous Rotary Systems: A CBCT Study.

OBJECTIVE: To evaluate the apical transportation and centering ability promoted by reciprocating and continuous rotary systems after root canal filling removal. MATERIALS AND METHODS: After obturation, 40 mesial root canals of mandibular molars were distributed into four groups (n = 20) for filling material removal: PTU group-F2 instrument (25.08) of ProTaper Universal system; R25 group-R25 instrument (25.08) of Reciproc system; X2 group-X2 instrument (25.06) of ProTaper Next system and X3 group-X2 instrument (25.06) of ProTaper Next system, followed by X3 instrument (30.07). Cone-beam computed tomographic analysis was performed before and after filling material removal for acquisition of apical images. Apical transportation (AT) and its direction, and centering ability (CA), were assessed using the equations AT = (X1-X2)-(Y1-Y2) and CA = (X1-X2/Y1-Y2 or Y1-Y2/X1-X2), respectively. Data were submitted to the nonparametric Kruskal-Wallis and Dunn multiple comparison tests (p < 0.05) for statistical analysis. RESULTS: There was no statistically significant difference among groups for AT (p > 0.05), with a tendency toward transportation in the distal direction. Also, there was no statistically significant difference among groups regarding CA (p > 0.05). CONCLUSIONS: The different systems, including ProTaper Next, caused AT within the acceptable clinical limit after filling removal. In addition, none of the tested systems presented adequate CA.