RESUMO
Sodium-ion batteries (SIBs) present a promising avenue for next-generation grid-scale energy storage. However, realizing all-climate SIBs operating across a wide temperature range remains a challenge due to the poor electrolyte conductivity and instable electrode interphases at extreme temperatures. Here, we propose a comprehensively balanced electrolyte by pairing carbonates with a low-freezing-point and low-polarity ethyl propionate solvent which enhances ion diffusion and Na+-desolvation kinetics at sub-zero temperatures. Furthermore, the electrolyte leverages a combinatorial borate- and nitrile-based additive strategy to facilitate uniform and inorganic-rich electrode interphases, ensuring excellent rate performance and cycle stability over a wide temperature range from -45 °C to 60 °C. Notably, the Na||sodium vanadyl phosphate cell delivers a remarkable capacity of 105â mAh g-1 with a high rate of 2â C at -25 °C. In addition, the cells exhibit excellent cycling stability over a wide temperature range, maintaining a high capacity retention of 84.7 % over 3,000 cycles at 60 °C and of 95.1 % at -25 °C over 500 cycles. The full cell also exhibits impressive cycling performance over a wide temperature range. This study highlights the critical role of electrolyte and interphase engineering for enabling SIBs that function optimally under diverse and extreme climatic environments.
RESUMO
Developing a CO2-utilization and energy-storage integrated system possesses great advantages for carbon- and energy-intensive industries. Efforts have been made to developing the Zn-CO2 batteries, but access to long cycling life and low charging voltage remains a grand challenge. Here we unambiguously show such inefficiencies originate from the high-barrier oxygen evolution reaction on charge, and by recharging the battery via oxidation of reducing molecules, Faradaic efficiency-enhanced CO2 reduction and low-overpotential battery regeneration can be simultaneously achieved. Showcased by using hydrazine oxidation, our battery demonstrates a long life over 1000 hours with a charging voltage as low as 1.2 V. The low charging voltage and formation of gaseous product upon hydrazine oxidation are the key to stabilize the catalyst over cycling. Our findings suggest that by fundamentally taming the asymmetric reactions, aqueous batteries are viable tools to achieve integrated energy storage and CO2 conversion that is economical, highly energy efficient, and scalable.
RESUMO
Molten salt aluminum-sulfur batteries are based exclusively on resourcefully sustainable materials, and are promising for large-scale energy storage owed to their high-rate capability and moderate energy density; but the operating temperature is still high, prohibiting their applications. Here we report a rapid-charging aluminium-sulfur battery operated at a sub-water-boiling temperature of 85 °C with a tamed quaternary molten salt electrolyte. The quaternary alkali chloroaluminate melt - possessing abundant electrochemically active high-order Al-Cl clusters and yet exhibiting a low melting point - facilitates fast Al3+ desolvation. A nitrogen-functionalized porous carbon further mediates the sulfur reaction, enabling the battery with rapid-charging capability and excellent cycling stability with 85.4% capacity retention over 1400 cycles at a charging rate of 1 C. Importantly, we demonstrate that the asymmetric sulfur reaction mechanism that involves formation of polysulfide intermediates, as revealed by operando X-ray absorption spectroscopy, accounts for the high reaction kinetics at such temperature wherein the thermal management can be greatly simplified by using water as the heating media.
RESUMO
Sodium-ion batteries (SIBs) hold great promise for next-generation grid-scale energy storage. However, the highly instable electrolyte/electrode interphases threaten the long-term cycling of high-energy SIBs. In particular, the instable cathode electrolyte interphase (CEI) at high voltage causes persistent electrolyte decomposition, transition metal dissolution, and fast capacity fade. Here, this work proposes a balanced principle for the molecular design of SIB electrolytes that enables an ultra-thin, homogeneous, and robust CEI layer by coupling an intrinsically oxidation-stable succinonitrile solvent with moderately solvating carbonates. The proposed electrolyte not only shows limited anodic decomposition thus leading to a thin CEI, but also suppresses dissolution of CEI components at high voltage. Consequently, the tamed electrolyte/electrode interphases enable extremely stable cycling of Na3V2O2(PO4)2F (NVOPF) cathodes with outstanding capacity retention (>90%) over 3000 cycles (8 months) at 1 C with a high charging voltage of 4.3 V. Further, the NVOPF||hard carbon full cell shows stable cycling over 500 cycles at 1 C with a high average Coulombic efficiency (CE) of 99.6%. The electrolyte also endows high-voltage operation of SIBs with great temperature adaptability from -25 to 60 °C, shedding light on the essence of fundamental electrolyte design for SIBs operating under harsh conditions.
RESUMO
Cation intercalation is an effective method to optimize the electronic structures of metal oxides, but tuning intercalation structure and conductivity by manipulating ion movement is difficult. Here, we report a visual topochemical synthesis strategy to control intercalation pathways and structures and realize the rapid synthesis of flexible conductive metal oxide films in one minute at room temperature. Using flexible TiO2 nanofiber films as the prototype, we design three charge-driven models to intercalate preset Li+-ions into the TiO2 lattice slowly (µm/s), rapidly (mm/s), or ultrafast (cm/s). The Li+-intercalation causes real-time color changes of the TiO2 films from white to blue and then black, corresponding to the structures of LixTiO2 and LixTiO2-δ, and the enhanced conductivity from 0 to 1 and 40 S/m. This work realizes large-scale and rapid synthesis of flexible TiO2 nanofiber films with tunable conductivity and is expected to extend the synthesis to other conductive metal oxide films.
RESUMO
Passivation of the sulfur cathode by insulating lithium sulfide restricts the reversibility and sulfur utilization of Li-S batteries. 3D nucleation of Li2 S enabled by radical conversion may significantly boost the redox kinetics. Electrolytes with high donor number (DN) solvents allow for tri-sulfur (S3 â - ) radicals as intermediates, however, the catastrophic reactivity of such solvents with Li anodes pose a great challenge for their practical application. Here, we propose the use of quaternary ammonium salts as electrolyte additives, which can preserve the partial high-DN characteristics that trigger the S3 â - radical pathway, and inhibit the growth of Li dendrites. Li-S batteries with tetrapropylammonium bromide (T3Br) electrolyte additive deliver the outstanding cycling stability (700 cycles at 1â C with a low-capacity decay rate of 0.049 % per cycle), and high capacity under a lean electrolyte of 5â µLelectrolyte mgsulfur -1 . This work opens a new avenue for the development of electrolyte additives for Li-S batteries.
RESUMO
Electrochemical conversion of CO2 to formic acid using Bismuth catalysts is one the most promising pathways for industrialization. However, it is still difficult to achieve high formic acid production at wide voltage intervals and industrial current densities because the Bi catalysts are often poisoned by oxygenated species. Herein, we report a Bi3S2 nanowire-ascorbic acid hybrid catalyst that simultaneously improves formic acid selectivity, activity, and stability at high applied voltages. Specifically, a more than 95% faraday efficiency was achieved for the formate formation over a wide potential range above 1.0 V and at ampere-level current densities. The observed excellent catalytic performance was attributable to a unique reconstruction mechanism to form more defective sites while the ascorbic acid layer further stabilized the defective sites by trapping the poisoning hydroxyl groups. When used in an all-solid-state reactor system, the newly developed catalyst achieved efficient production of pure formic acid over 120 hours at 50 mA cm-2 (200 mA cell current).
RESUMO
Conventional solid-to-solid conversion-type cathodes in batteries suffer from poor diffusion/reaction kinetics, large volume changes and aggressive structural degradation, particularly for rechargeable aluminium batteries (RABs). Here we report a class of high-capacity redox couples featuring a solution-to-solid conversion chemistry with well-manipulated solubility as cathodes-uniquely allowed by using molten salt electrolytes-that enable fast-charging and long-lived RABs. As a proof-of-concept, we demonstrate a highly reversible redox couple-the highly soluble InCl and the sparingly soluble InCl3-that exhibits a high capacity of about 327 mAh g-1 with negligible cell overpotential of only 35 mV at 1 C rate and 150 °C. The cells show almost no capacity fade over 500 cycles at a 20 C charging rate and can sustain 100 mAh g-1 at 50 C. The fast oxidation kinetics of the solution phase upon initiating the charge enables the cell with ultrafast charging capability, whereas the structure self-healing via re-forming the solution phase at the end of discharge endows the long-term cycling stability. This solution-to-solid mechanism will unlock more multivalent battery cathodes that are attractive in cost but plagued by poor reaction kinetics and short cycle life.
RESUMO
Although batteries fitted with a metal negative electrode are attractive for their higher energy density and lower complexity, the latter making them more easily recyclable, the threat of cell shorting by dendrites has stalled deployment of the technology1,2. Here we disclose a bidirectional, rapidly charging aluminium-chalcogen battery operating with a molten-salt electrolyte composed of NaCl-KCl-AlCl3. Formulated with high levels of AlCl3, these chloroaluminate melts contain catenated AlnCl3n+1- species, for example, Al2Cl7-, Al3Cl10- and Al4Cl13-, which with their Al-Cl-Al linkages confer facile Al3+ desolvation kinetics resulting in high faradaic exchange currents, to form the foundation for high-rate charging of the battery. This chemistry is distinguished from other aluminium batteries in the choice of a positive elemental-chalcogen electrode as opposed to various low-capacity compound formulations3-6, and in the choice of a molten-salt electrolyte as opposed to room-temperature ionic liquids that induce high polarization7-12. We show that the multi-step conversion pathway between aluminium and chalcogen allows rapid charging at up to 200C, and the battery endures hundreds of cycles at very high charging rates without aluminium dendrite formation. Importantly for scalability, the cell-level cost of the aluminium-sulfur battery is projected to be less than one-sixth that of current lithium-ion technologies. Composed of earth-abundant elements that can be ethically sourced and operated at moderately elevated temperatures just above the boiling point of water, this chemistry has all the requisites of a low-cost, rechargeable, fire-resistant, recyclable battery.
RESUMO
Considered as an imperative alternative to the commercial LiFePO4 battery, the potassium metal battery possesses great potential in grid-scale energy storage systems due to the low cost, low standard redox potential, and high abundance of potassium. The potassium dendrite growth, large volume change, and unstable solid electrolyte interphase (SEI) on the potassium metal anode have, however, hindered its applications. Although conductive scaffolds coupling with potassium metal have been widely proposed to address the above issues, it remains challenging to fabricate a uniform composite with uncompromised capacity. Herein, we propose a facile and efficient strategy to construct dendrite-free and practical carbon-based potassium composite anodes via amine functionalization of the carbon scaffolds that enables fast molten potassium infusion within several seconds. On the basis of experiments and theoretical calculations, we show that highly potassiophilic amine groups immediately transform carbon scaffolds from nonwetting to wetting to postassium. Our carbon-cloth-based potassium composite anode (K@CC) can accommodate volume fluctuation, provide abundant nucleation sites, and lower the local current density, achieving nondendritic morphology with a stable SEI. The fabricated K0.7Mn0.7Ni0.3O2|K@CC full cell displays excellent rate capability and an ultralong lifespan over 8000 cycles (68.5% retention) at a high current of 1 A g-1.